Ай бұрын
Пікірлер
@JMC8415 7 сағат бұрын
Hows this holding up a year later?
@JohnsonMotorsports 3 сағат бұрын
It’s been great, however I just realized I need to replace all my bearings.
@JMC8415 3 сағат бұрын
@@JohnsonMotorsports makes sense. I'm looking to get a used McLane and do the same
@brooklineknightsbball7302 2 күн бұрын
I'm enjoying your videos bra. did this solve the vibration?
@jjyung23 3 күн бұрын
Would you recommend this or the more expensive VSRF FMIC ? Also are the results the same could I still go stage 2 either or ? Thanks anyone
@Dunks341 4 күн бұрын
Any idea how to get rid of the static sound or distortion when using aux
@JohnsonMotorsports 4 күн бұрын
Typically you will need to make sure you have a solid connection. Then I will set the volume on my phone around 90% and leave it there. Adjust system volume from the Headunit, not your phone. That’s what works for me.
@robthetennisman 5 күн бұрын
Really useful video and well explained, thank you! On a side note I’ve been struggling to get a solid version of ISTA installed for a while, could anyone point me in the correct direction please?
@JohnsonMotorsports 5 күн бұрын
Where have you been looking? I found my version of Ista on Bimmerfest, however that was almost 4 years ago.
@BurrNinja 7 күн бұрын
I think its really cool these company's make things to modernize older vehicles. Good review btw, keep it up Grant!
@HASSAN-mj5xj 7 күн бұрын
Looks really nice especially since the option for CarPlay in these type of cars is pretty limited and overpriced
@JohnsonMotorsports 7 күн бұрын
Yeah, and it’s such an easy install!
@Ali-ex4uk 7 күн бұрын
Thanks for sharing ❤
@flaminggaming5295 8 күн бұрын
Hey I’m going from a 90 ah battery to a 92 ah battery. I’m in a 2008 528xi. I don’t see the option for 92 or the option to put in a custom value like I see on your screen, what do I do?
@sokola311 8 күн бұрын
Holy Sh!t. That trans was gone. Wow.
@Mr_Techie_24 8 күн бұрын
Does it came with New Cap or to be ordered seprately?
@willjay9808 9 күн бұрын
do they have any tests shown like kzbin.info/www/bejne/gYKrhnevhN6rf8k I wonder if they are doing the same thing. I'm looking to buy the upgrade now. Arc is cheaper, but does it do what ET3 does? Because the ET3 seems like a solve all solution (except for increasing the gauge of the wire in the harness)
@truthiz102 9 күн бұрын
Yeah ive held off on ordering a spoiler because the m4 looks that way but isnt the same
@thomascartwright2295 9 күн бұрын
What size in and out are the tips? About to order some
@turbospool 10 күн бұрын
Great review! Looks nice and sleek too
@JohnsonMotorsports 10 күн бұрын
🙏🏽
@brandenfrancis6440 11 күн бұрын
Hey I just got a code like this on my 535i. Did replacing the pump stop you from getting the codes?
@ShahidKhan-uw2ix 11 күн бұрын
How did you wire up the thigh support function, did you need to code the thigh support function?
@jackwinters1366 12 күн бұрын
Good effort on the install! And very impressed with the dash paint, maybe there is some hope to get rid of my oyster interior!. Quick question about your HUD though. My car has oem heads up and I'm just fitting an android screen but it does have the socket for the HUD plug. Can you just clarify your wiring? you spliced into K-Can, anywhere specific? And the other 2, any ground and the power was that ignition 5V or 12V?
@JohnsonMotorsports 12 күн бұрын
I don’t think I will be much help. I wasn’t aware the Android Headunit had a port for the HUD display.
@Ahi2high 13 күн бұрын
If you took the intake manifold off you could've just slide it out on a N54/55.
@tristxnbtw298 13 күн бұрын
I’ve only got a muffler delete done as of rn. Will I be able to actually tell a difference in noise is I add this high flow catted ? Definitely want some more noise.
@GhostF90 8 күн бұрын
Want to know the same before I purchase haha
@tristxnbtw298 13 күн бұрын
I’ve got just a muffler delete rn… want it to be louder. But don’t want to smell gas from catless. Will I be able to tell a big sound difference if I add high flow catted?
@armandohoda4088 14 күн бұрын
hi bro do need to coding this and when i leave the engine on had big misfiring and injector 2and 4 came on error code do you think need coding after i put new valvtronic servo?
@user-tg3fu6zc8y 14 күн бұрын
Hi Grant, great video, how does the pedal travel feels after upgrading from 60mm pistons to 2x 40mm and 44mm pistons? does it have a longer pedal travel? Thanks
@Alfonso-mh1np 15 күн бұрын
When do i need to do cylinder sleeves and forged crankshaft? They say 600hp max on factory sleeves and crank
@JDMsohc 15 күн бұрын
"Alcoholic wipes" made me lol. My boy was ready for a drink after this task!
@ConsciousNumber1 15 күн бұрын
Damn! That’s this is nice! I plan to do something similar to my 330i.
@fatih7774 15 күн бұрын
Good day, I am very happy with your explanation, but I have installed buttons and activated the sport automatic via BimmerCode, but it does not work. what did I do wrong ? could you help me
@JxstJosh 16 күн бұрын
Top bolt on the cat is impossible
@JohnsonMotorsports 15 күн бұрын
😂. Nah it just takes time and the right tools.
@JxstJosh 15 күн бұрын
@@JohnsonMotorsports what did you use i couldn’t get it out with a 13 mm wrench
@JohnsonMotorsports 15 күн бұрын
@@JxstJosh If I call correctly that’s what I used. That or a 1/4” ratchet with a swivel socket.
@JxstJosh 15 күн бұрын
@@JohnsonMotorsports okay thanks
@anttheman6370 17 күн бұрын
Got a p0456 and a ghost code along with it on my 2014 m5 , I just replaced my gas cap. The old one was pretty worn out hopefully this fixes my code
@JohnsonMotorsports 15 күн бұрын
Hopefully that fixes it for you!
@kamilkostrzewa3055 18 күн бұрын
Hey ,nice video ,do you remember how you coded the paddle shifters on beemercode? Step by step ?
@JohnsonMotorsports 15 күн бұрын
Sorry no. It’s been a long time. I think you just code Sports Transmission and paddle shifters.
@kamilkostrzewa3055 15 күн бұрын
@@JohnsonMotorsports ok thank you ,great channel
@jaswinderdhillon7772 19 күн бұрын
Hello thanks for good info Question i had 535i what side claims i need also can send purchase link
@JohnsonMotorsports 16 күн бұрын
I’m not understanding what you are asking.
@mikasilva3618 19 күн бұрын
Hey man nice video did u have to reprogram the module?
@JohnsonMotorsports 17 күн бұрын
Nope, no programming necessary.
@mikasilva3618 14 күн бұрын
My issues is a put a aftermarket hpfp on my f10 550i xdrive and now when is hot outside my car dies i scan the code I had a code for ekp I touch the ekp that plastic was hot I just got the cooling fan I will try that 1st than upgrade to this module
@nell7869 9 күн бұрын
@@mikasilva3618depends on year. Some cars may require coding. Pro tool on Android Google Play store supposedly will program these. Believe it's like 160$ for master license and coding for use of protool.
@djnes2k7 19 күн бұрын
Bro I’m in the same boat with all the other lights being smoked or black outlines. Younger me would’ve been on board. 43 me like nah gotta stay red.
@JohnsonMotorsports 19 күн бұрын
😂 Agreed! Not sure what it is about 43. 😂
@soaxin7439 19 күн бұрын
still have the car? hows the motor? i got an early n55 at 122k right now.
@JohnsonMotorsports 19 күн бұрын
Yeah, still have the car and now I’m hybrid turbo chasing 600+ whp. Currently sitting around 172k miles.
@romannichita8305 20 күн бұрын
Hey Grant, any problems with the aftermarket eccentric shaft since the replacement? Thanks for the video!
@JohnsonMotorsports 19 күн бұрын
No issues with the replacement.
@AmandaJohnson-mn4hq 21 күн бұрын
❤
@Carlos335is 22 күн бұрын
What I was told by ARC is that the heat transfer actually helps with the cooling 🤔
@Mosesexperience 23 күн бұрын
Great damn review bro I love it
@lueluc8522 23 күн бұрын
Do you have comfort access doors?
@JohnsonMotorsports 17 күн бұрын
Yes sir
@forzafanatic8359 23 күн бұрын
Great video! Love the content.
@SHWELL11 23 күн бұрын
NICE
@G3LDY 23 күн бұрын
weird my f10 has never had a power fault
@jasonmilton2967 19 күн бұрын
You probably won’t see those error codes too much of don’t have a larger turbo or integrated port injection which consumes more fuel and increases the load on the ekp
@JohnsonMotorsports 15 күн бұрын
Depends. I started having issues with mine after I upgraded my lpfp and went to a E50 mix on the stock turbo.
@FoulNews 23 күн бұрын
Thank you so much for reviewing this! Great vid!
@gonzaloberdugo6954 23 күн бұрын
Awesome man, Thanks!
@JohnsonMotorsports 23 күн бұрын
🙏🏽
@JaredVlogzYT 25 күн бұрын
Do I have to relearn only if i replace the valvetronic motor for a new one or do i have to do it even if I use the same one?
@raychallenger9623 25 күн бұрын
Have the same issue with my Chrysler 300, your method of repair will work for me only 14mm to 16mm and a valve. 😊
@JohnsonMotorsports 25 күн бұрын
Glad the video helped!
@itznando4661 26 күн бұрын
can i install high flow downpipe without a tune?
@JohnsonMotorsports 26 күн бұрын
Unsure. My car was already tuned with MHD for my previous catless downpipe.
@donochiel 26 күн бұрын
Same problem with a 2011 450 but when turning right
@itznando4661 27 күн бұрын
do you get cwl?
@JohnsonMotorsports 25 күн бұрын
Sorry, what’s a cwl?
@yoBradyO11 27 күн бұрын
Did you ever end up experiencing issues with the cheaper eccentric shaft? I'm looking to save myself $1,000 😂
@JohnsonMotorsports 27 күн бұрын
The eccentric shaft has been holding up great. Don’t recall having a CEL for the Valvetronics since the install.
@yoBradyO11 27 күн бұрын
@@JohnsonMotorsports excellent!