BMW Ista D Adaptions Reset For Gearbox & Engine Reset Adaptions

[@herbphelps8713]

I did a reset on my transmission adaption using ISTA+. I recently changed the fluid and filter. The car now drives so much better. Thanks for the vid Dean!!

[@BMWDoctor]

Good to know!

[@mazz368]

Hi Dean, what is the difference between option 1 (Reset Adaptation Values and Versions (encoding)) and option 2 (Reset Adaptation Values)?

[@kaloyanyordanov1395]

If i change the fluid and rubber sleeves do I need to carry out adaption reset

[@mrhurt123]

I HIGHLY recommend Dr. Dean and his services! I can't imagine owning a BMW without ISTA D now. I know everything that my dealer sees, and what they don't want to tell me, and thus know what to expect before walking in the door. It's has saved me hundreds in dealer costs. Not to mention I can now properly reset every aspect of my car when needed. Dr. Dean knows these programs inside and out, he's truly a master of these programs!

[@gulag8735]

Where can I get ista??

[@naders5]

With the foxwell scanner it asks you to start the car when doing relearn adaptions ?

[@danielsogor]

Hi Dean! I have a BMW 5 Series F10 and after battery change my car doesn't start, I have multiple errors but the one that I think is stopping the car to start is "VDM: Transport Mode Active" and I deleted transport mode with X-Tool but error still present and car still doesn't start. Do you think ISTA will fix it?

[@micks325]

Hi Dean, Can I reset Gearbox adaptions on an F48 (2018) using the Launch Creader Elite that you recommended several months ago or by using Bimmerlink/Bimmercode? Car has only covered 20,000 miles and changes are a bit notchy. I don't have access to ISTA. Thanks in advance

[@larsbirgersimonsen4038]

Can you reset adaptions on the transfer case after oil change with Ista D?

[@tonyroolze]

Can the topdon ArtiDiag800bt that you’ve promoted before do this process at all? N57 330d zf8 speed….

[@pgdmed]

Why would you want or need to reset your adaptions? Just wondering

[@johnoneal4533]

After a fluid change

[@112rorz]

Thanks for the video. Do I have to let the car sleep right after the engine adaptations reset to let the data save? Or can I end that service function, stay in ISTA and continue with transmission reset and valvetronic limit positions as you did in the video and THEN let it sleep after all three things are completed? Will the engine reset still work?

[@damojan]

Dean, how can I reset transmisson shift adaptations on an E83? The option doesn't seem to exist is ISTA

Hi Dean, I keep reading on the internet about a complicated driving process you have to do after transmission adaptions reset, should I do that or not?

[@gorancukfsu]

@BMW Doctor do you know if there is a 'relearn' procedure for the ZF 8 speed transmission? I know there is one for the 6, but can't find anything for the 8. I reset my transmission adaptation, and now there is a lag in acceleration

[@AdobePro1993]

Did you ever find a relearn procedure? I'm about to attempt this on my car after changing solenoids on a zf8.

[@HustlerM]

When i change the oil of the gearbox, do i have to reset the values as well ? Thank you !

[@BMWDoctor]

You don’t have too but I would Reccomend doing it

[@HustlerM]

Ty Chief ! 🙏

[@sultan0alsaif]

Please answer me ! Hi , i have an F10 V8 and Drivetrain malf. Messgae came out and i diagnosed it . It turned out to be VANOS solenoid issue , i dont know which one so i thought replacing all 4 of them would be best since i have 90K miles . I replaced all 4 yesterday and my car still drives like its in limp mode . I didnt replace them myself an inde shop did it and everything is correct as far as parts and labor . So do i need to code them or something ? Please help

[@bmwM5ma]

Is this same for 2008 E60 M5

[@polayer4040]

What is the best place to download ista d? Can someone point me in the right direction? Thanks

[@Nerrv]

I did this on my N55 535i 2011 after changing vanos solenoids. It resulted in giving me codes (164041) Exhaust camshaft: installation error and (120408) Charge pressure control: shutdown as a result of reaction. The car shakes like hell on cold start and and gives me CEL like in 5 seconds. I tried to erase them but they keep coming back every time I start the car. I didnt have any codes before but had rough idle. I even reinstalled the old solenoids and clear the codes but it was same issue. Could this procedure messed up my cam timing ?

[@alexcm.05]

Any update?

[@El_Ghost-Gaming]

@BMW Doctor what would the risks be in doing this on my M2 Comp? I got ISTA but not much on forums about running this on an M car. At the moment my gearbox is a little jumpy going from first to second in slow traffic and it's also stalled twice since getting it back from BMW after a ISTEP upgrade. It's still under warranty but would like to understand fully what this is doing.

[@AhmedEmad-mp3fz]

Hey man! Quick question. Can I use same method you showing to get the car out of Limp mode? I have fixed the issue. But still I get a drivetrain message.

[@TheZvonko1]

Hi! X3 e83 What if after this procedure I have 6e39 in transmission and it's 4x4 and small gear on dashboard? Did I do something wrong?

[@sujeet6635]

Man i cnt see engine electronics under power rail :(. My engine shakes a bit thought reset would help.... I kind of reset the gearbox weeks ago do u think, it could also be the cause the shake?

[@BMWDoctor]

if your car is shaking EGR VALVE IS STICKING or injector is failing that will have nothing to do with gearbox reset

[@maltiveru]

Hello - great vid. You can just reset the transmission for the shifting points correct? no need to reset the engine as well? In the transmission section there is an option 'oil change'. What is that and what is it used for? when you do an oil change?

[@jonwhyte8297]

Hey Doc would like to have the next available voltage stabilizer that comes up unless there is a queue, Ps Keep up the good work

[@jayobama9582]

What software do you use? I need something for the clutch adaptations on my 2006 650i with the 6 speed SMG

[@LeonardoCostaUSA]

Greats tips man!! What system are you using?

[@mihag6124]

You would do me a very big favor if you explained in a video how to correctly place the SDP and BLP file, thank you very much for your videos, you are an artist.

[@BMWDoctor]

If you become a member all these kind of videos and a lot more will be on there ONLY FOR MEMBERS expert package only the price is £40 a month If you want me to do it properly and screen recorded you must pay

[@fadiaboalkhair411]

@@BMWDoctor please tell me the process how to be member

[@quickautohydtectek1316]

HI DEAR SIR THANKS FOR YOU INFLAMMATION I HAVE BMW WORKSHOP I NEED HELP FOR YOU THANKS

[@drunklunchbox619]

Huh????

[@LAW-Automotive]

Great channel subbed! Dean Im looking to buy a cable and software. I would like to do coding for injectors and general diagnostics. I doubt I will do any programming and I don't have a voltage stabilizer anyway yet. What cable is the best for plug and plug coding and diagnostics with insta?

[@TheKeenMechanic]

Hi Dean. Does this apply to all automatic gearboxes including the older e31 e38 e39 etc? Thanks for another great video

[@BMWDoctor]

Yep thats correct espically E39 thats the most common cause of E39 gearboxes giving up and failing people leaving the adaptions set for years and years of different ownership and different shift style patterns that they fail

[@TheKeenMechanic]

@@BMWDoctor Thanks mate. Great to know that.

[@BMWDoctor]

Your welcome vladi give me a call when you want mate your choice

[@thevernonposse]

My car make sounds all night long DVD player fans does that mean I have the same problem

[@Nmax92]

Great video. I want to get that software too. Will this work on my car? I have 2005 530i E60. I took it to an indy. The 1st thing he said was the I need a new valve body. At first the car used to give me a transmission malfunction error when coming to a stop from 2nd to 1st gear. I have INPA and did a transmission adaptation reset, I dont know if it did it correctly. Now when I accelerate lively, it shudders up to 20MPH until I let off pressure on the accelerator, from there there is a hard shift into the higher gears. The transmission malfunction from 2nd to 1st went away. Would your adaptation reset work in my situation?

[@BMWDoctor]

Yep it would indeed and yes this software works on every single bmw mini and rolls Royce regardless of age

[@junegem4548]

I hav ista +… i changed the high pressure fuel pump. How do i reset? Bmw f11 535i

[@42-BMW-M57]

How to relearn the Bmw E90 330D 170Kw Automatic Transmission Adjustments (ZF6) (2006 )procedure after the adaptations reset?

[@19strongy90]

If the car was mapped would this affect the map/delete it?

[@BMWDoctor]

Yes it will avoid at all costs or you will lose all power to your accelerator this is why it’s not good to have a mapped car if you do NONE of this software can apply to your vehicle anymore you make yourself useless to the bmw community you will need to design your own scanner or work around to do things with a mapped car just like I have done

[@19strongy90]

Bmw & Mini Doctor I thought it might, I’ll leave it alone then! Had the car eco mapped and removed the dpf, egr and swirl flaps was getting a lot of problems at the time, 15k miles on and all still good.. touch wood haha

[@deegpt]

love these tutorials they are very helpful ive recently just bought a e90 335d lci along with ista d ive learned how to use it with your videos but i still dearnt update my modules incase i mess it up

[@BMWDoctor]

Got it here aswell mate go and watch them then update away it’s what I’m here for

[@deegpt]

@@BMWDoctor nice one and il watch the video then give it a go and cheers for the good videos makes it alot easier

[@3LTwinTurboDiesel]

Hi dean sometimes my 530d gearbox holds onto gears i thought that could of been because the seals under the mechatronic unit and not holding pressure or could it be the adaptions? I have tried to reset adaptions on the carly app but still does the same thing when going on and incline it doesnt change down to 3rd it stays in 4th slips kind of until the tc desides to lock then feel connected Hope that makes sence its hard to explain Nice videos btw keep up the good work

[@BMWDoctor]

Cheers mate see your a yid supporter lol its wherw im originally from yes mate i had a 530d aswell did the dame thing do not use carly carly is a pile of s**t mate i have two of them all they do as i tell everyone is leave fault codes coding errors carly does not clear adaptions properly on the 530d i know this as i just got rid of my e39 530d and it did the same when i got it mate but if its e60 gearbox failurw is a common problem as the gearboxes bmw fitted for many years on them could not handle the torque at all properly there a american gearbox used on the 530d tell me have you remapped it or did the previous owner mate

[@3LTwinTurboDiesel]

Tottenham till i die 😂 Yh its been mapped to around 280-300bhp

[@BMWDoctor]

Thats your problem mate straight away get rid of the remap i knew that remap f**ks the gearbox on all diesel bmws hence why dont get remap unless you can repair it because it does blow the torque converter they cant handle the torque already from factory let alone remapped and yes i am tottenham till i die but dont support them

[@Lasha_GEO]

Hello bro, great video!, i have one question, I have damaged my diff 3.38 on e60 550i and i want to change it with 3.46 diff after this will my transmission work perfectly?

[@IntrusoIntrumetido]

Hello Dean, It's completly safe to do this reset's on engine and transmission on 2014 520d F11? I see somewhere that one guy have a lot of problems after do that reset in engine! I purchase the car in 2ª hand and, i feel too many consumer of diesel and, i want try reset everythink to try if resolve this exccess or not...

[@msl64183]

Can Ista D be used to relearn valvetronic motor after rocker cover gasket replacement? And Is it necessary to relearn or reset valvetronic after the rocker cover gasket replacement? Thanks

[@BMWDoctor]

Yes it is and yes it can depending on your version if your using a older version or free version it will not be able to do it

[@youbarajsharma7603]

I guess it is fine to do the Transmission reset first and then the Engine reset so that you don't have to wait inbetween for car to sleep!!

[@x1area51ii7]

I replaced my E63 SMG clutch back in 2013 (132kmiles) afterwards, drove it to dealer to get the clutch adaptation done. After fun 30k miles (162k) later it started throwing malfunction transmission in 2017 (stuck in R). I replaced salmon relay,battery, SMG fluid, ibs negative cable, module inside Ebox, fuses etc.NO luck ! Towed it to Independent mechanic for diagnostic still couldn't figured it out how to get the gear to( N). I got sick of it and stored my car in the garage for 2years no start. Today 2019 I decided to give another shot. Took down my gearbox,clutch,flywheel, and all SMG unit components all in great shape. Tested gear shift ,angle sensor, solenoids, pressure sensor are all in good ohms values. After all that work I still couldn't get the car to neutral. It keeps going to R in dashboard. My shifter doesn't do anything even if I move to N, or 1. My battery is at 13v reading after fully charge, same battery I bought 2017. Then the miracle happened!!I am still puzzled how I got it started. Heres how I did it, I unplugged my neg cable waited 5 sec and plugged back in, I then pressed unlocked car via key fob waited 2 sec I then inserted the key to driver door and turn to right to alarmed and turn to left to unlocked. I quickly inserted the key to ignition and FC*^%$ cow I heard click and N on dash showed up but quickly lost all power after 1 sec. Everything went out I re -unplugged my battery n repeat the process and shit started right up!!!! No smoke no hesitation just like what is was in 2013. I'm shocked!! I run my INPA to monitor status all is good even I unplug my battery on n off now stays in N. My guess was my car went to sleep mode or maybe when my old battery died it put the car into security locked mode.. who knows but damn it's crazy!

[@BoyBoyBoyBoy-zc2nx]

Hello I have a question can this work for this code cd99 cd9d

[@mihag6124]

you are awesome

[@Filipp81]

Where is transfer case reset option?

[@kevinvandevelde9789]

Talk to You about my X5 once things are done

[@BMWDoctor]

Ok mate its fine

[@BMWDoctor]

@@kevinvandevelde9789 dont even know what you mean

[@kevinvandevelde9789]

@@BMWDoctor BMW Fanatic go to his channel look at my post on his latest Just some promo for you an Nate

[@BMWDoctor]

Loool mate your asking for it from him hes a a**e mate he thinks he knows it all yet i asked him a question about diesel engines and made him look a k**b loooool he aint no bmw fanatic if he dont know every bmw engine there is lol

[@kevinvandevelde9789]

@@BMWDoctor I don't watch him much seems like he wants to keep up his bimmer. Though it would help him. An get you a share to your channel. If he gets upset such is life. The more info I have the better for my bimmer. As with his.

[@herbphelps8713]

....I’ve also seen posts stating that doing adaption resets on the transmission is not a good idea but I think they are talking cr*p!!

[@Aaron-CC]

Under Transmission control I don't have 'Adjustment', I only have 'Oil Change'. Is this normal? How can I reset the adaptation for my transmission? I have a E87 130i with a GM box (GA6L45R)

[@BMWDoctor]

That’s probably because you have free version that’s what happens I’m afraid

[@Aaron-CC]

@@BMWDoctor Thanks for your reply! Is there another way to reset it? I read on the forum some people say to turn the ignition on and fully press down the accelerator for 30s. Does this work?

[@BMWDoctor]

🤣🤣🤣🤣 mate if your reading on forums your as bad as half the youtubers who give you info if you fall for that you will believe pigs can fly Mate that crap don’t work at all that’s all a gimmick your only way to reset ecu is via software why are you resetting your adaptions anyway

[@Aaron-CC]

@@BMWDoctor I just changed my automatic transmission fluid and I saw your comment below that you recommend to reset it. I have the engine adaptation and valvetronic options just like you in the video, but just don't have the 'Adjustment' under the transmission.

[@BMWDoctor]

@@Aaron-CC thats because it doesn't have ADJUSTMENT for gearbox when you reset adaptions it resets adaptions in the DME AND GEARBOX