DOING THIS WILL RESET YOUR CAR AND FIX IT FOR FREE

[@BMWDoctor]

CLICK HERE TO BECOME A PART OF HISTORY ON THIS CHANNEL….. kzbin.info/door/VC3s1g57DoBMNOk_al1CVQjoin

[@Yazid-hb8gl]

Combien de câble de démarrage me faut il pour réalisé votre méthode? Merci

[@johndeere464]

I had a problem with my Mazda CX5 . The car suddenly stopped starting on occasion, with no apparent reason. The battery was good and the key fob also worked fine. When the car didn’t start sometimes the dashboard acted up like a Christmas tree. Several mechanics looked at the car and couldn’t fix it. Then I found in KZbin a video with similar problems and was advised to disconnect the battery for about half an hour, connect it again and with the key fob close and open the car once. Then start the car. It worked perfectly. Since I did this trick the car has started every time without a problem. It seemed to be a reset and the problem was probably that one day I left the car on with the door closed for to long and the car turned of automatically after a certain time period. That was the when the starting problems began and got worse over time. Now I know how the resolve this.

[@Grant-H2O]

I just watched a video from scotty kilmer saying that you actually need a resistor inbetween there to slow down the rate of discharge because discharging a module can damage the sensitive components by causing a surge of power to be released from the capacitors or something. IDK ive never had a problem doing this and i did it on my VW Jetta once.

[@hizanawaz2706]

Dr Dean provided by far the most valuable content for BMW owners Thank you Dr Dean and god bless you

[@peterbuckley7561]

We were always taught to connect the positive terminal first for safety reasons because if you connect negative first then second positive terminal the spanner or ratchet could short circuit to battery bracket or other earth even a newly charge battery could explode due to gas fumes or even the spanner has been known to weld itself to ground/earth!

[@artyfhartie2269]

@@peterbuckley7561 Correct

[@bronniesboy]

a pair of jump leads or a single jump lead using each end please, 👍🏽?

[@roberttasca6748]

One lead so that all electric charge is discharged completely. What your doing is shorting out the power input to the system.

[@jmseipp]

My CD player stopped working in my 2005 Dodge Dakota, it wouldn’t spit out the CD. I was just beginning a long road trip, San Diego to Houston, 1,500 miles, and was looking forward to listening to an audiobook about the life of Abraham Lincoln. I tried everything to get the CD out of there even including using needle nose pliers! Nothing worked. Bummer. Months later I had to replace two oxygen sensors in my catalytic converters which required unhooking the negative battery cable. After replacing them I hooked the negative cable up again and it immediately spit out the CD and it has been working just fine ever since! It just needed to be reset.

[@rogerthat1963]

wait a second: when removing battery leads the correct way i learned is first neg then pos and when repositioning first pos than neg. Have I been taught wrong??

[@deborahallsbury1175]

No, you are right. I've been reading and waiting for someone to say that. Be safe.

[@General813]

The procedure is wrong. Under no circumstances should you bridge the + and - cables! In the worst case scenario, this will destroy the engine control unit! Disconnecting the ground cable is sufficient. Then turn on the light switch to let the residual current flow away more quickly. After one night, turn off the light switch again and connect the ground cable. Stop the engine and do not accelerate. Let it stand for 5 minutes, while definitely not stepping on the gas! Then drive 70-80km (city, country, highway) so that the control unit relearns all driving conditions. Complete.

[@miguelmendes861]

@@General813 u overreacting because why did it work perfectly with him? Plus he did it many times before & no problems & many other people as well like myself, at least he showed proof while u showed nothing so until u can prove it then u can compare

[@terry_willis]

Good question. What caused the rough running in the first place? He didn't fix the root cause.

[@mariegili]

c'est une excellente méthode de réinitialisation qui fonctionne sur toute les voitures thermiques . ma Peugeot 406 hdi refusait de démarrer sans raison logique et après avoir fait cette manipulation elle a démarré au quart de tour !

[@Yazid-hb8gl]

Bonjour Faut il utilisé un seul câble branché sur les deux bornes?

[@hernandomoreno8803]

@Yazid-hb8gl yes

[@montysrodsandpins4426]

Hi... Why are you connecting your negative terminal to the battery first, afterwards ???? Was not taught this !!!!

[@dannycolemire2652]

For all you people asking what do I do with the other end of the jumper. Look this isn't rocket science! If you're using jumper cables you will have a red and a black claw like clamp on each end of the jumper cables. So just use the red side of the jumper cable hook one end to the negative battery cable and the other end to the positive.

[@Ragnarou812]

Yes, I spotted that right away! It's like a never-ending circuit with the single cable connected to positive and negative cables. Never would I have thought of this! However, I have always connected the positive cable first to the battery and then the negative. Had a battery explode one time and don't care to do THAT ONE again!

[@rbmwiv]

I always opt for a thinner wire with clips attached. There's no requirement for a large cable as it's merely a matter of current. I appreciate you demonstrating how to jump them. It feels like I'm consistently suggesting this action to fellow BMW enthusiasts.

[@abcdef007ism]

It’s a very good information video. Please make a one video to clean all the sensor connecting with engine how to clean it at home.

[@wordie1111]

I did this with a 1991 730se after it was stuck in 2nd (limp mode) 20 years ago ,after putting a second hand autobox in her i took the battery out put a jump lead between the plus and minus charged the battery, left the jumplead on for like 2 weeks ,fired her up and bingo all 4 gears,fun fact same gearbox as a range rover,just without the transfer box a HP4 something like that,i did all this in 2004/5😂

[@justcurious3525]

I don't understand the subject line. How does resetting the codes fix the underlying problem that set them in the first place?

[@TURBO-AUTIST]

sometimes the car has a problem and adjusts itself because of said problem (you get an error code and maybe a light on the dash) and runs poor because of it. bad coolant. old oil. old gas or diesel. bad fuel filter. bad air intake. bad sensor. bad pump. then you go fix or maybe just clean it and it still runs poor because the car didn't adjust itself back. by resetting it you basically start with the factory settings. it doesn't "fix" it but it's like retraining memory or restarting a computer. sometimes it just need a fresh new start and if it goes back to running like shit then you need to look at it again.

[@maxdavies9327]

Whats on the other end of the jumper leads ??. You dont explain if the jumpers are connected to anything ??. Or do you just use 1 lead and attach it the the negative and the other end of the lead to positive ???. Max.

[@jassim1964-h5w]

Absolutely Technique it's perfect thanks a lot

[@swanseamale47]

It might clear the warning, but it probably won't fix the real problem. Plus the code will stay in the cars computer. Also on some cars you'll need to recode the radio, and even re set the electric windows. Some Ford's have this issue.

[@michaelcoles5480]

Would you mind explaining the jumper leads more? I cant see which of the ends and/or negative and positive you used. Video was very informative. 2011 BMW F25 i28 xdrive. Thank You!!!

[@randybeard6040]

Does not make any difference, you are simply draining micro voltage off sensors--like rebooting you computer...

[@johngleadall8263]

Do you use one jump starter cable connected to each cable from the car.. or 2 separate charger cables .only it wasn't very clear please

[@anthonypaterson7066]

You did not what to with the others ends of the jump leads?

[@GhostRideR-1985]

not true exactly. it will reset, but DTC will stay memorised.. you need diagnostic equipment to read and delete fault codes and that is only and proper way to remove all DTC after repair.

[@luanramani3091]

Hello friend see if you want my problem is in the coment upper thenks hawe a nice dey.....

[@shababahmedelsyed6760]

Hello I tried this on my very old 2002 renualt clio and yes it worked a treat idling was a mess I think it reset the airflow and sparkplugs and everything that go's along with it thank you so much

[@jetjeff10]

Just done it on my two 20 year old cars Idling has come down Will drive tomorrow and see any changes

[@PaulMalboeuf-b4s]

I had a problem with my van not starting. When I got it going it was fine. But if I stopped somewhere and tried to start it again. It wouldn't start again. Thought the battery was dead. After a while it wouldn't even turn over but there was still power in the battery. Took a look under Neath on a lift . Get this it turns out the connector wire for the starter was loose and came off.

[@RoccoBaraglia]

Using both cables or only one ?

[@chronomatt6990]

I think the last time you presented this, you turned on the headlights for a moment while the leads were connected to discharge any electricity that might be in the system.

[@lax5996]

does it reset the Maf sensor adaptions ?

[@adrianlunnon3514]

@lax5996 no you'll need a proper diagnostic

[@bjornlofven7337]

Thxs for the video I will try it, but I have one question, do I use a single jump cable and connect one end to + and the other end to -? To create some kind of circul connection?

[@bernhardiner2011]

@@bjornlofven7337 Sie setzen hierbei nichts unter Strom, die Batterie ist abgeklemmt. Sie sorgen für einen Masseausgleich / Reset indem Sie Fahrzeug + und - zusammenlagen ohne Batterie!

[@randybeard6040]

YES...

[@jaybrahmbhatt7197]

I would not connect + and -- ends of one cable that will create short circuit. Instead I would turn on head lights and drain the remaining charge.

[@onepcwhiz6847]

Um... 2 of the 4 connectors on the jumper cables. What are the other 2 connected to?

[@daniquelikion5190]

Mercie pour cette aide précieuse je vous suit

[@Nicholas-ok9no]

You still need the right thing

[@mrmrst9020]

Will this work on my ford transit custom 2014 👍🏻

[@artyfhartie2269]

What about the car security system? Will the remote unlock the doors?

[@Weevve]

Does this work on mercedes

[@geetarman]

Take a long extention cord cut off end connect to battery cables plug other end to power and everything reset

[@goalsaf9389]

אתה מספר 1 תודה רבה לך.🥰🥰🥰🥰🤩🤩🤩🤩😍😍😍😍

[@stevehildebrandt6921]

This may seem a little silly but what are the jump leads connected to before you're connecting them to the battery leads

[@Bodman68]

@@stevehildebrandt6921 It's one jump lead.

[@markd5266]

Thanks Dean, I understand the theory behind this, it clears the memory and fuel adaptations so to speak. I have tried this and my R53 ran fine for a few hundred miles, and the fault came back. My guess is by clearing the fuel adaption memory the engine was happy, but while driving, the ECU is finding something that it isn't happy with and then readjusting the fuel adaptation. If the engine still pulls good and runs good, would you go down the route of a sensor problem or mechanical.

[@johnmitchell3719]

Wont the codes return later?

[@peetstellaard3511]

Instructions are not very clear. Always disconnect & REMOVE the Earth/Negative cable 1st! That way your wrench can not cause a short when touching & disconecting Live / Positive cable!. ALSO! why does Dr. not explain what to do with the 2 clamps on the other side of jumper cable ? CONNECT ?

[@chellybabyme]

I don't understand any of this.

[@VTPRODUCTIONS14]

Hey do this work on 2014 x5

[@yy-oo4xl]

can you do this with range rover sport

[@AdamKahn-d2b]

Also i had vanos solenoid fault code and NOX sensor too

[@Alexbmwf36]

Hi. Please, i need your help about my f36 420d 11/16. So the problem is that when the car is locked and I unlock it the left mirror indicator is not working,if I go into the car and I put hazard lights left mirror indicator is not working again, when I want to lock it no working. And,when I start the car and I put left indicators is working, hazard lights is working.so is working only when the car is running. Please help

[@GhostRideR-1985]

read dtc with good scan tool, preferable ISTA+

[@andrelafrenais4478]

A brilliant idea---thank you.

[@jaimeuruena4789]

Hola Señor, gracias por la informcion.

[@Lcj762]

I have a similar problem With my 2013 vauxhall insignia I can be driving down the road Then for no reason She goes into limp mode Pull over disconnect the battery reconnect the battery Runs like new, Plug in the otofix D1 plus Scanner No error codes?

[@Peter-PDT]

seit wann schließt man Masse zuerst an

[@manfredwetzel7975]

Wenn du aufpasst, ist die Reihenfolge scheißegal, die Empfehlungen gelten für blutige Anfänger.

[@kyle404040]

Dean are you still doing the ECU flashing for n53's on your membership ? Found conflicting info on whether it's possible with some saying it'll always revert to standard power after 10 hours or something. The same people say you have to get dme + cas module from an n53 330 or 530?

[@alanmartins6349]

I really want to buy a BMW but from everything I read i'd have to be some kind of stupid to do so. Question is: Is there any BMW say from 2021 to now that would be worth the purchase? Heard the x5's have the reliable B58 engine, is that correct? Love the channel Happy Holiday's .

[@tomhoro6468]

Heard of Toyota

[@luanramani3091]

Hello Frend I hawe a problem with the back dor is stuck, not opening by the keys end in kontrol table is showing a light for open back door ollsou the weper back not working end the back glas Dorr is stuck...soo can you help me ... thenks brother

[@cristianp4590]

would this work on 320d n47 2010?? i intend to change the starter motor and glow plugs on it .would be better to do this before or after i change the parts ? thank you

[@jeffobi1023]

I thank you very much for this excellent video.

[@JamesByron-w1j]

I watch this video today (12-31-24) i have a 2007 Toyota Avalon XL, that i would like to do a Reset on, my question is, it it a single jumper wire running from the positive terminal to the negative terminal, or are opposite ends connected to something else

[@Aty3Studios]

Single wire running from positive to negative terminal

[@azaman7713]

You never showed where to connect the other side of jump leads

[@doseofsanity]

That is both sides of the cable. He’s using one cable to short out the two leads. (Which you shouldn’t do.)

[@robprice9586]

Azaman,, did you actually watch the video..?

[@franciscogomez7105]

Funciona este procedimiento en un vw jetta a4 año 2001?

[@oneeyeopen100]

My 04 e60 hasn't started since it fell off the floor jack. Four mechanics looked it and they don't know what the problem is. Any advice?

[@markR6.76]

Try the earth on the front drivers wing , have u looked at the battery connectors in case they moved or charge the battery to full charge , or bump start it and see if it fires up , I’ve got a 04 530d and as long as u look after it , it will look after you !! Good luck 👍

[@jaromirmikula385]

What about the impact sensor?

[@ThruDaLenz]

​@@jaromirmikula385on the battery terminal.. brilliant

[@kdcustoms1272]

Does the engine turnover?

[@Frank0061000]

Exact et je connaissais cette méthode . Ce qu'il faut dénoncer c'est surtout l'arnaque des concessions automobiles voire de certains garages . Perso un problème de jauge a essence sur une Clio 4 qui ne bougeait plus . Chez Renault , passage a la valise et prises en charge pour intervention catalogué 180 euros hors taxes j'ai fait cette manip en 15 minutes et cela a fonctionné et ne s'est plus reproduit depuis . QUESTION ; On ne peut pas penser que le service technique de Renault ne connait pas la manip ? Morale de l'histoire , tous des escrocs . C'est surtout pour cela qu'il nous faut rester solidaires entre utilisateurs .

[@Yazid-hb8gl]

Bonjour Combien de câble de démarrage faut il utilisé pour que cette méthode fonctionne? 1ou2 câble?? Merci

[@edreo4516]

Doc, Whats the perfect aidelling for a e38 740i. Automatic v8 should be at?? 600RPM? Also? Thank you..

[@BMWDoctor]

For a V8 I would say 650rpm would be the best as at 600 all cylinders won’t be balancing correctly I would raise the idle which you can do easily with a scan tool to 650 and see the difference much better on a V8 at 650rpm anything else if it’s 3.0 600rpm is enough

[@derbalhadjeri7072]

Salut ,pouvez vs m'expliquer, les cables rouges, deux extrémités fixées sur la batterie et les extrémités à la main ou les placer...ou rien faire merci

[@Hadelgharbia]

Can i do this also with my Ford S max 2.5 turbo from 2006 with a manuel transmission

[@Infinite.Consciousness]

Can I do it on my e53 3.0i? Also can a wrongly installed android screen cause my blower heater not working? Can the the cabin air filter be too dirty thus causing that? Its winter nd I got no heat in the car but seat, steering, rear windshield heats

[@chellybabyme]

How's your water pump?

[@Infinite.Consciousness]

@@chellybabyme good question! How do I know it’s faulty?

[@GroupAPV]

Doc am I able to run 5w 40 in Queensland Australia with turbos? Ambient lows of 20-25 degrees C. Thanks mate!

[@Alfaqeh007]

Hi mate My car has been remapped would this reset the remapping too. !!!??

[@stevanussuwintoro4461]

Is it applicable for F30 facelift 2016?

[@colinevans7134]

Make sure you have the radio code first

[@nflp7]

Hello, I've always heard that the positive is connected first, can you tell me why in BMWs it's the opposite? sorry for my english.

[@mikeymagic117]

He made a mistake. When reconnecting, it's positive first, then negative.

[@wongy79w]

Hey I have some issue cos i foul my oxygen sensor, but I chances all 4 brand new and it will appear de faul again, what can I do? To fix that problem 😢

[@Thenameonthegraveisarchstanton]

Innit dough!

[@pcbdude33]

Does this work on N52 ?

[@MrCheerbo]

Can this work on jeep gladiator

[@philipgardner-uz5ne]

So this goes back 2 factory?

[@pericodelospalotillosverdes]

and for the F series?

[@DavidHart-s6y]

Brilliant 👍

[@Gaz.1979]

Hi Dean will this work on a n57 335d

[@hanskonrad]

Zurücksetzen ohne Fehler Behebung, bringt ger nichts! Fehlermeldung kommt in 2 Tagen wieder ! Fehler Reparieren, dan Fehlerspeicher Löschen , dann Gut !

[@manfredwetzel7975]

Gilt nur für bmw älter 30 years, und alle codes ua vom radio, die du nicht aufgezeichnet hast gehen verloren. Manfred

[@alirzacetine46]

my car e46 328ci Top Tec ATF 1200 liqui moly recommends my car 2000 model will it be a problem to use this

[@AdamKahn-d2b]

I have a bmw 3 series e92 2009. When i disconnect the vanos solenoid connectors car will be in limp mode with engine light on . I replaced and connected everything all lights cleared but as soon as i rev car will cut off. Any advice ?

[@Thenameonthegraveisarchstanton]

It mash up

[@kungfuhustle6363]

​@@Thenameonthegraveisarchstanton😂😂😂😂😂 Yea man it bruk up nuh raasssclart

[@PaulMurphy-f9q]

Yeah that only works temporarily, plus you only remove the negative cable

[@michaelkrahn9487]

What are your jump leads connected to??

[@Bob-c9r]

Other end of jump leads goes WHERE ?

[@lawrencem3012]

My stereo stopped working. i disconnected battery and the next day reconnected, then stereo system was working perfectly.

[@EvzenKovar-i5p]

So how did the vehicle end up in the state where the engine was running rough?

[@BMWDoctor]

Where do I start? 😅

[@EvzenKovar-i5p]

@ I am honestly curious. How about just this… was it after component replacement, some sort of custom tuning or just a random event where you suspect the ECM software got all wonky for unknown reasons?

[@BMWDoctor]

you got it bang on! it was a tuning file I flashed to it and it was running rough and had throttle Body adaption issues which was making it idle all over the place and rough but after doing this as you saw, it was perfect and since then been perfect had no issues now been driving it with not a issue that's why I love this reset method quick easy and free.

[@EvzenKovar-i5p]

@@BMWDoctor will you try a different tuning file or leave it now? I really don’t know what kind of promises files like these make. I imagine the temptation was real, and could be hard to turn down again.

[@eskommtaufdenblickwinkelan9028]

Bei meuen Fahzeugen funktioniert das nicht ,da muss man alles anlernen .

[@dankmazzi2376]

Computers are a pain, modern car's. 😑

[@luanramani3091]

It's BMW 320d ...2006y .Automat

[@rewes666]

hmmm when you disconnect the battery first you take (-) and than (+), when connecting first (-) not (+) like he said

[@hypebeast5686]

@@rewes666 he said and did exactly that though.

[@GhostRideR-1985]

when connecting battery, first connect positive and tighten it, then connect negative, if you connect negative 1st, when connecting positive you can accidentally touch ground of car with your wrench and have short circuit. if you connect positive 1st, when touching with wrench chassis of car, nothing will happen..

[@pete_surgeon]

You reconnected the battery terminal wrong. Positive first.

[@PiotrOkrasa-m4v]

Co ma na celu takie podpięcie kabla??pozdrawiam

[@bierzbucha6448]

wyciąga więcej prądu z samochodu

[@kieuphong8756]

Thank you, Doctor

[@robybabe4461]

It seems there are a FEW thickos on here... let me explain.... 1 jump lead required...1 end to the positive lead and the other one to the negative....FFS ...Although as explained by some of the clever people , it might fuck up your car completely.

[@Alexbmwf36]

Hi guys. I want to ask Dean something about my f36. Anyone knows how to contact him? Thanks

[@jaromirmikula385]

I call it a hard reset.

[@earlwitts]

Thanks....UNKAL EARL/REVERBNATION

[@Iknewit6]

Temporary fix

[@themiller-highlifeguy]

There is so many things wrong with this video, not sure if it’s a skit or is this truly how they do things in Australia or Sweden or wherever he is. Here in the states, we do things a bit more…. correctly….. Not to mention, there wasn’t a bit of difference from before and after he tried his nonsense damaging behavior…. Too many scones if you ask me

[@perrygibbons1816]

BS 🐂💩, not if there's a problem that needs fixing

[@claudehobes5958]

Diese KI Stimmen sind mehr als Peinlich und Nerwig.

[@omarfongvillarreal1721]

THANK YOU FRIEND FOR THE INFORMATION. GREETINGS