In today's episode we will prepare and paint the engine parts in beautiful and shiny black :) IG Acc: c.p_customs_
Пікірлер: 34
@Dice_weiss2 жыл бұрын
I’ve got a k100 I’m about to strip down, this series has been a great help!
@toddtonis3 жыл бұрын
That was alot of work. But the results look very nice. I have an old BMW R100 and now that I've watched your video I'm going to do the same thing to that bike's valve covers. Thanks!
@CPCustoms3 жыл бұрын
Thanks buddy 🙏🏻 It is definitely worth the effort! Best of luck with your project 😎✌🏻
@demiscunningham73403 жыл бұрын
I wish I could upload a picture of my stripped k75 I've just deleted the abs (non functional) the bike weighs half of what it did with all the fairing removed, this video has gave me confidence to DIY myself a shiny engine 👋👋
@CPCustoms3 жыл бұрын
Hey mate thank you 😎 you can do it 😜 I hope you will achieve a great result 💪🏻
@davidlindsey1835 Жыл бұрын
It seems that you have a pretty good shop setup, and presumably a decent compressor. You may want to look in to a DIY vapor honing/blaster for your shop---if you haven't since you made this video. Check out some youtube videos, concise minimal talk. And, you stop when an important development occurs. You make great videos. I have a 86 K100RS and was going to eventually restore to original, but I like the cafe racer better.
@mervinshan8853 Жыл бұрын
Top Video und alles geil erklärt. Dein Humor gefällt mir 😂 fange bald auch an meine umzubauen und struggle noch mit dem Lack. Deiner glänzt verdammt gut! Kannst du mir verraten welche Marke du benutzt hast?
@senci94143 жыл бұрын
👍
@Andrewlone174 Жыл бұрын
will be great to have paint info
@duskonovak22323 жыл бұрын
👍👍
@conbry6388 Жыл бұрын
I’ve got a k100 I’m planning to strip and restore. Quick question, was there a reason you removed the covers to strip and paint the block and just covered the cams and crank with masking tape? My plan was to leave the case covers on for stripping and repainting the engine block then take them off and do them separately and reattach them. Use the covers as masks. Is that a good idea or is there a reason not to do that?
@ljubicacuturic97643 жыл бұрын
👌🥰
@Bokslegens4 ай бұрын
Hello, I watch your videos on KZbin. I will buy a torque wrench for the K1100lt motorcycle engine. 20-120 N.M Will an adjustable torque wrench be enough or should I buy 25-220?
@Okan_tr3 жыл бұрын
Mega geile Arbeit, könntest du bitte sagen welche Farbe du benutzt hast? Wieso hast du den Block nicht mit der Dose ebenfalls lackiert? Welches Tabe hast du zum abklemmen genutzt? Danke
@CPCustoms3 жыл бұрын
Danke dir 🙏🏻 Ich wollte beim Block mal was anderes ausprobieren, muss aber gestehen das ich beim nächsten Projekt den Block auch mit Dose lackieren werde, das Ergebnis ist mit Dose einfach feiner 😆 Tape ist ganz normales Lackierer Tape 😎✌🏻
@marckomen37142 жыл бұрын
Sehr gut! I am searching the internet for a high gloss heat resistant paint in a can, but with no results... Can you tell me the specific can you used? It would greatly help me in my DIY paint job for my K100 🤘🏻 Gruße aus Holland.
@NBRC2 жыл бұрын
hello, witch brand paint you used ? i want to paint my k 100 to ... thx ... tumbs up
@joonatuomivaara4223 жыл бұрын
I am working my k100 and this video helps a lot. Thank you! What kind of paint did you used? How it resistant heat?
@CPCustoms3 жыл бұрын
Thank you buddy 🙏🏻🙏🏻 I used a paint which is usually considered as brake caliper paint but it works pretty good for engines too. Next time I will try VHT engine paint I’ve heard it works pretty good 😎
@Wuschi200111 ай бұрын
@@CPCustomswill it work? Considering the engine is partially out of alumminum?
@berrywest16223 жыл бұрын
You really need to put on a mask when painting parts man ;)
@CPCustoms3 жыл бұрын
Due to corona I am low on masks at the moment 😂🤷🏻♂️ but thanks for the advice 😆 I will order some for the next job 😎🤘🏻
@akse2E3 жыл бұрын
What model of spray paint did you use for the caps and does it keep well? did you use varnish or just paint?
@sufletdemotociclist70142 жыл бұрын
it's brake caliper paint
@frankieitaly863 жыл бұрын
Wieso hast du den Motor mit 🖌 lackiert? Ist ein Spezial Lack? Danke
@CPCustoms3 жыл бұрын
Ich wollte das Ganze mal ausprobieren 😄 beim nächsten mal wird aber wieder die spray Dose benutzt, das Ergebnis mit Pinsel ist ok aber doch sehr grob die Farbstruktur wenn alles trocken ist 😅 aber nicht so tragisch, vom Block selber sieht man ja nicht viel später 😎👍🏻
@dornsophorn88543 жыл бұрын
hi brother may I ask you please how much is it for this motorcycle?
@CPCustoms3 жыл бұрын
Explanation in the final epsiode 😎
@dp46023 жыл бұрын
Moin, Hast du die Teile mit normalem Lack lackiert oder ist das hitzeschutzlack?
@CPCustoms3 жыл бұрын
Servus, das ist so ne Art Bremssattellack, also kein expliziter Hitzeschutzlack. Hat aber soweit immer alles gut gehalten. Da hat aber jeder seine eigene Philosophie 😅 Gruß Patrick ✌🏻