BMW M Sport Brake Pad Replacement Step-by-Step With Torque Specs (Brembo M-Sport)

Applies to most BMW Sport Brakes. How to Replace Front Brake Pads and Rotors on a BMW Sport: Expert Guide with Pro Tips. Step-by-Step Guide with Torque Specs. Full Video Tutorial with Detailed Instructions.
BMW G30 5 Series Sport Brake Replacement full DIY with tips and tricks.
Replacing Sport Brakes on your BMW Made Easy with this tutorial.
(Brembo M-Sport 2, 3, & 4 5-Series)

[@charlesg6583]

Definitely one of the best instruction videos I have seen for replacing rear brakes and rotors on the BMW X5. I have a 2019 X5 M sport package. I didnt realize how complicated it was. I would never have figured out all the steps and special tools I need without watching this. I may still bring it in to a professional shop to since I dont think I would ever use those tools for anything else in the near future and I dont want to kill my back for this at my age. At least I know what to ask them about and how long it should take.

[@AskTheCarExperts]

Thank you Charles. Thank you for watching and posting a comment. If you do decide to do them let me know how it went.

[@ronhipwell5543]

This was extremely helpful on the front of our 2018 X3 m40i. Brembo recently released ceramic, low dusting pads for the front and rear of this car so I tackled it this morning. Especially appreciated the side note on not using the paste on the rails of the pads as the pads have a specially coated shim that obviates the need for such paste. Now to bed them and see how they stop, and if they’re cleaner than the originals!

[@AskTheCarExperts]

Hi Ron! Awesome to hear my video was helpful! You will have to let me know how the low dust pads work out and how responsive they are. Thanks for being a subscriber for 10 years with me!

[@stevetech5150]

just finished mine today. this video was extremely helpful. thankfully i work at a dealership and can use my shops lifts and air tools so it went very well. appreciate the tutorial! note: make sure you have something to hang the calipers up on the upper control arms. makes cleaning the pistons and calipers much easier and they are out of the way so you can easily swap the rotors. this guys video was very thorough. DO WATCH YOUR BRAKE FLUID LEVEL CLOSELY! I HAD TO SIPHON SOME OUT.

[@AskTheCarExperts]

Great to hear Steve! Appreciate the comment!

[@sportbikejesus6297]

Thank you so much for this well made video. When I did my brake job, all the videos focused on the rear brakes bc of the ebrake. I’ve done a lot of brake jobs but wanted to see the details of this particular car. Still, until you said it, it never occurred to me why the pins were so hard to remove from the back side of the caliper. Also it never occurred to me to turn the wheel so the brakes were easier to see. Of course can only do that on the front but it still helps.

[@AskTheCarExperts]

Great to hear my video helped!

[@devinsmith4151]

Depending on how much you like your customer, would advise taping near the pin slots with some masking tape. Mayhew punches with the extended shaft works wonders.

[@AskTheCarExperts]

Thanks for the info!

[@devinsmith4151]

@@AskTheCarExperts Always welcome. Some other pointers that may make it easier on yourself would be dousing the pins with a penetrant lube to allow easier sliding, you can wash it off after installation if you want. I typically crack the bleeder line open and wedge a mini-prybar to make things easier between the piston retraction. The bleeder line open is very effective, sometimes you can even use your fingers to push in the pistons.

[@rm8168]

Great video instruction. Thank you

[@AskTheCarExperts]

Glad it was helpful!

[@84Marnix]

Great video Super helpful

[@AskTheCarExperts]

Great to hear 👍 it was helpful!

[@DenizBerber-nf6rj]

Danke für das Video.👍

[@AskTheCarExperts]

Gern geschehen!

[@thisall4real]

Great video thanks. Do you need to open brake fluid tank cap to allow you to push pistons back in?

[@AskTheCarExperts]

Thank you! No, the air will vent out but be cautious not to allow the fluid level to get too high. You can open the cap to make pressing the caliper back easier and monitor the fluid level. Brake fluid will destroy paint so it is important not to let it overflow.

[@thisall4real]

@@AskTheCarExperts Thank you. Appreciated.

[@jasonkwon2186]

@@AskTheCarExperts if the fluid level is getting too close to the top, do I simply siphon it out correct? When do I put the fluid back in the reservoir?

[@danm3479]

When you press the brake pedal to glue the pads in, should you refill the brake fluid u took out?

[@AskTheCarExperts]

Hello, If the fluid is low then you would top it off but if the reservoir is close to full it should not go down to much.

[@Davee-jc4bp]

You need to replace the front caliper retaining bolts everytime you unscrew them ?

[@AskTheCarExperts]

According to the repair instructions, they are one-time use hardware. It would be recommended to replace them.

[@jasonkwon2186]

Would this and the rear brake video apply to a 2020 m340i with the bigger brakes ZTK package?

[@AskTheCarExperts]

It should be very similar.

[@pcmactechnician]

Question. I just need to replace the pads. Will I harm the rotor when pushing the piston with a screw driver?

[@AskTheCarExperts]

If you catch just the outer edge you should be fine. Just be gently when prying it a bit. You only need to clear the lip of the rotor if any. Then take the caliper off and use the old pad and some pliers to compress the piston. This will help keep the rotor safe.

[@davidtchanturia6630]

Does the rear pad replacement require electronic brake to be retracted? And if so how?

[@AskTheCarExperts]

Hello. Most modern BMWs have electronic parking brake. You have two options. Use a scan tool that can put them in service mode. Or use a brake tool. I do this in my videos on rear brakes.

[@davidtchanturia6630]

Yes well, I ended up doing the rear without your video- (because I can’t find it) but i had to retract the electronic brake system manually with a T screw, other than that it was similar to any brake change.

[@kbesner]

@@AskTheCarExperts Do you have a video showing how to do the rear brakes with the special brake tool you mention? Thx!

[@domcars]

Hello so a shop recently did my front brakes and they make a creaky sound when I depress them a bit like the sound at 12:22 did they forget to lubricate something? When in park as well and I press the brake it makes the sound too

[@AskTheCarExperts]

Hello, Hard to say what might be going on. Do they make noise when braking and rolling forward? If so, you should have it checked by the installer. Brakes can make a crunching noise while stationary and turning the wheel left to right.

[@domcars]

@@AskTheCarExperts Yeah the noise only happens when applying the brake even in park so I know it’s not a suspension issue. I’m thinking maybe something got stuck where the pad slides back and forth

[@AskTheCarExperts]

@domcars It would be worth having them double check the work they did.

[@domcars]

@@AskTheCarExperts Alright will do 🙏🏼

[@metalmansyr]

Does it work on LCI with break regen?

[@AskTheCarExperts]

Yes Brake regeneration does not actually use the brakes. When you brake the alternator slows the vehicle sends the power back to the battery for charging. Brakes take over at certain times but the vehicle is slowed using engine braking.

[@metalmansyr]

@@AskTheCarExperts Awesome, thank you very much. very helpful. I have replaced pads/ rotors on fords and Jettas before but this would be my first one on a BMW :D

[@AskTheCarExperts]

@@metalmansyr Glad to help! Hope my video is helpful and I have two giveaways running. Just watch the video and post a comment. Smoke machine and a borescope.

[@arturchrist3211]

Wieviel Nm bekommen die Schrauben?

[@AskTheCarExperts]

Mit 140 Newtonmeter anziehen

[@jodymarentez9847]

*Promosm*

[@AskTheCarExperts]

I had to look up this comment. :) Please promote and I hope it was helpful Jody.