Рет қаралды 55,271
BMW M3 S54 Powered 1970 BMW 2800CS E9 Build Project
What is it?
It’s a perfect BMW sandwich. There’s a 2800 CS on the outside and an S54 straight six from the E46 M3 on the inside. One of the all-time great engines by any manufacturer, sitting in one of the best shapes ever bestowed on motoring. Needless to say, we’re fans.
Who builds it?
It’s an Australian builder of tremendous restomods by the name of John Ward. Not to be confused with Jonathan Ward, the American builder of tremendous restomods, this Mr Ward is different by dint of being both Australian and having a much shorter version of the same name. And also that his company is called Fuel Bespoke Designs, rather than Icon. See? Clear as an azure sky of deepest summer.
What’s been done to it?
Many, many things. For starters, the donor car for this gorgeous machine, dubbed the ‘Von Trapp’, was an engineless, transmission-free, generously rusty and hastily repaired shell of an E9, just sitting around in a builder’s yard. So the entire body had to be stripped and properly restored.
And, because it’s a coupe from the 1970s that was destined to get quite a bit more power, getting that power down - and keeping the car in one piece - was the next port of call. Cue competition-spec stitch welding of the entire shell and much custom fabrication to fit the rear subframe, drive shafts and differential from an E28 535i. Up front, it was a case of fitting as much M3 as possible, which meant a custom subframe, as well as modifying the S54’s sump to clear the new framework.
Helpfully, the E36 M3 five-speed fits the E9’s transmission tunnel without modification, and can handle the shove from the rebuilt, factory-fresh S54 without grenading itself like the original 2800 CS gearbox would have. Also, a five-speed just feels more... well, correct than a six-speed in something of this vintage, no?
Add in custom brakes, coilovers, electrical wiring and Alpina-esque wheels, finish off with a full interior retrim in red leather and some spot-on ‘Carbon Schwartz’ black/midnight-blue paint and that’s a cliff-notes version of the huge project Von Trapp was.
Is it fast?
It has a 330bhp M3 engine in a 1400kg car. So yeah, it’ll get along OK.
We should remind you that this car is from Australia, a country that is doing its best to equal Switzerland in its crackdown on anything that could be remotely considered ‘fun in an automobile’, so a dyno-tested 300bhp to the back wheels is more than enough to get so far into trouble that emigration to a sensible nation is the only answer.
How many are being built?
Just the one, at this stage. Unless someone reading this very article has a yearning to transform their ratty old E9 into something quite special. Or if someone has space in their garage and that old favourite, the large wad of combustible money that always seems to burn holes in pockets.
How much does it cost?
This one sold to a very lucky (and presumably very happy) customer for somewhere around 280,000 dollarydoos. That’s about £155,000, which is a considerable stack of cash.
Not the kind of money that, say, the Australian government wasted on F-35 jets that don’t work. But definitely enough to put a very considerable dent in the bank balance of even well-off restomodding fans.
Why should I care about it?
Um. Did you not see the part where it’s an E9 pillarless coupe, with more power than even the road-going CSL Batmobile?
Also, in a world where every man, his dog, his dog’s girlfriend and a small rodent called Geoff has built some form of restomod Porsche 911, doing something different is its own reward. Also, there’s the reward of owning one of the coolest-looking coupes ever built that just happens to have not only one of the best-ever straight six engines, but one of the all-time great engines under the bonnet.
Built By:
FUEL Bespoke Design
Sydney, Australia
Phone: +61 413 460681
www.fuelbespok...
john@fuelbespokedesign.com
/ fuelbespokedesign
/ fuelbespoke
/ john-ward-6943112
-----------------------------------------------------
This video purpose is to tell world about amazing car build project and to inspire ever growing car builder community around the world. So if you're inspired in building your own car and want to learn more about how to do it in best way, don't hesitate and read build source page so you can learn something new and if something is not clear you can always ask builder some questions about the build.