BMW M54 Dual Vanos Removal & Rebuild

  Рет қаралды 5,252

GaragE36

GaragE36

Күн бұрын

In this episode I rebuild the M54 Dual Vanos unit on My E46 330 Touring due to some bad running issues.
The X8R Dual vanos rebuild kit is available from x8r.co.uk/for-...
Any questions just ask and I will help where I can.

Пікірлер: 22
@joefromdover300
@joefromdover300 5 ай бұрын
I will be in touch for sure
@jamesmcpherson5468
@jamesmcpherson5468 Жыл бұрын
Awesome man will do this over xmas!! 🔥🔥
@GaragE36uk
@GaragE36uk Жыл бұрын
Thanks for commenting mate. Glad to help.
@joefromdover300
@joefromdover300 5 ай бұрын
Video was perfect, everything i needed to understand how it works. Thank you
@GaragE36uk
@GaragE36uk 5 ай бұрын
Thank you Joe. Really glad to have helped
@painful1342
@painful1342 29 күн бұрын
My vanos won't come out and I've been pulling and every bolt has been takin out. I gave up because I don't trust myself breaking anything
@GaragE36uk
@GaragE36uk 29 күн бұрын
@@painful1342 is it just stuck with sealant? If all bolts are removed and the little torque bolts inside then it should just pull off.
@pieterkankerboef5711
@pieterkankerboef5711 3 ай бұрын
Heey, first of all thanks for the video. What about the solenoids? Isn't it smart to clean them to?
@GaragE36uk
@GaragE36uk 3 ай бұрын
Thanks for watching. And yes you could if you wanted.
@gbrobynable
@gbrobynable 3 ай бұрын
VANOS error. Low power and eventually stalling at junctions.
@GaragE36uk
@GaragE36uk 3 ай бұрын
@@gbrobynable you have them symptoms?
@meguinness1116
@meguinness1116 Жыл бұрын
Do you need to reset ADAPTATION after the rebuild? I done mine following your video and many other...but once fitted back the engine idle is all over the place...and then engine stalls. Checked both camshaft Sensors and they working ok. The timing asnt been touched as I only removed the vano assembly and nothing else. Suggestions? Thank you for your time
@GaragE36uk
@GaragE36uk Жыл бұрын
I didn't need to reset adaptations mate just worked normal after fitting. Any codes?
@meguinness1116
@meguinness1116 Жыл бұрын
@@GaragE36uk yes ...p1520, I checked both solenoids to and they seem to work.
@GaragE36uk
@GaragE36uk Жыл бұрын
@@meguinness1116 that code is for the exhaust cam sensor.
@gbrobynable
@gbrobynable 3 ай бұрын
Would this be similar to an e60.
@GaragE36uk
@GaragE36uk 3 ай бұрын
Yes if the e60 is fitted with the m54 engine
@TwistedTattoo.WarShorts
@TwistedTattoo.WarShorts 2 жыл бұрын
Awesome step by step video iv👍very useful and loads of good info
@GaragE36uk
@GaragE36uk 2 жыл бұрын
Thanks mate, appreciate that.
@TwistedTattoo.WarShorts
@TwistedTattoo.WarShorts 2 жыл бұрын
@@GaragE36uk 👍
@Khaledghaffari
@Khaledghaffari 2 жыл бұрын
Why didn't you clean it? 😤🤬🤔
@GaragE36uk
@GaragE36uk 2 жыл бұрын
It was cleaned.
Timing Chain Assembly Procedure BMW M54
40:42
CRANK
Рет қаралды 223 М.
Worst flight ever
00:55
Adam W
Рет қаралды 24 МЛН
An Unknown Ending💪
00:49
ISSEI / いっせい
Рет қаралды 54 МЛН
BMW M54 Dual Vanos Timing Procedure
30:54
boostxpress
Рет қаралды 29 М.
New Workshop | M50B30 Stroker Build
10:04
GaragE36
Рет қаралды 195
How to rebuild BMW VANOS
46:59
HAN'S GARAGE
Рет қаралды 272 М.
Top 10 Parts That WILL FAIL On Your BMW M54 Engine At 100K Miles
11:21
Maxpeedingrods T7's or BC Coilovers
10:44
GaragE36
Рет қаралды 1,3 М.
Worlds Most Reliable BMW Engine?
43:02
Jamie's Garage
Рет қаралды 446 М.
BMW E46 M54 Vanos Seals & Rattle Kit Replacement DIY
31:27
ShopLifeTV
Рет қаралды 170 М.
BMW m54/m52tu CCV replacement | The quick way
21:38
GaragE36
Рет қаралды 15 М.
CANADA TO USA? Will This Pantera Drive 1,000 Miles Home After 33 YEARS?
1:50:07
The Only BMW I’d Buy
8:27
Scotty Kilmer
Рет қаралды 3 МЛН