Not 100% sure as it was a while ago, but I had both airbox's, can't remember if I used the top half of one and bottom of the other, for some reason that's in my head.
@BmwMe-uh9sy5 күн бұрын
M54 weak af
@GaragE36uk5 күн бұрын
We can't all like the same things I suppose.
@miltjk12 күн бұрын
what about shift linkage? e30 m40 or e36 m42 i will choose? i took transsmision from e36 m42 thank you again!
@GaragE36uk12 күн бұрын
Hi. We used the m40 transmission and gearlinkage set up. Not sure when using the m42 transmission
@miltjk8 күн бұрын
thanks , I finally installed it today everything went perfectly! what about mount intake because with M40 ENGINE mount doesn't install it. Where did you find a mount for intake? Many thanks in advance!
@Thomas-fc6gf16 күн бұрын
What did you end up doing fuel-wise? did you keep the e36 fuel filter? Or use an e46 fuel filter?
@GaragE36uk16 күн бұрын
You use the m54 filter as that has the pressure regulator there. Just run the feed to the fuel. The m54 doesn't have any return from the rail. The return is sorted via the pressure regulator on the filter. When you fit the m54 filter, you will see that you need to cut down the steal fuel return line to attach it to the return part of the filter. Hope that makes sense.
@danielinacar16 күн бұрын
Mannnnnnnn
@GaragE36uk16 күн бұрын
I know.
@Usuckman20 күн бұрын
My e36 m3 sedan drift build’s engine just shat itself but I have an e85 z4 3.0 6 speed and I was thinking to just swap over the parts. Would it be worth it? as the z4 would either get cut up or the engine is going into something else anyway. I own a shop with my friends and I was planning on just using all the parts off the z4 I’d need but I’ve heard getting different m54s from different cars result in having to source other odds and ends to finish the swap and I’m wondering what I’d need to complete the swap into my e36 m3 using my e85 z4 3.0 6 speed (planning on fitting my transmission too, assuming it will fit with slight alterations)
@GaragE36uk19 күн бұрын
Hi mate. I am not sure on the z4 as I have not used an m54 from one of them or investigated what's needed to fit one. They can obviously all be made fit bit what odds and ends are needed I'm not sure.
@TwistedTattoo.WarShorts23 күн бұрын
🎨😢😢😢
@blakepellington353727 күн бұрын
Hey mate, throwing a Hail Mary question out there all the way from Australia. I have a stock 95 318is, looking to swap this exact motor in, would I just be looking at a straight engine swap+accelerator pedal+ loom adaptor? Or would there be there more to it?
@GaragE36uk26 күн бұрын
Hi mate. Basically yes. You need m52 exhaust manifolds and downpipes/exhaust. And m52 engine mounts.. Power steering lines from m54 or m52 can be made to work. 6 clyinder gearlinkage from e36 or chassis mounted shifter. 6 clyinder clutch and flywheel. E36 rad
@lockwong8162Ай бұрын
SAME PROBLEM WITH MY E36 I DONT KNOW HOW CAN I DO :(
@GaragE36ukАй бұрын
We use a different style of pocket now, think I show them in another video.
@Thomas-fc6gfАй бұрын
Could you please answer this one question for me. My engine was pulled from a 2004 bmw x3 3.0i , which means the engine has ms45.1 . . . When performing my swap, would i send this same ECU out to get tuned, or would i need to use the ECU from a post-facelift e46? I would like to keep ms45.1 because i believe it will be more cost effective for me.
@GaragE36ukАй бұрын
Hi mate. Never used the ms45.1 when doing them, we always use the ms43, but I am pretty sure it makes if more difficult on the wiring side if using ms45.1
@Thomas-fc6gfАй бұрын
@@GaragE36uk you're probably right, but i noticed certain website offering adapter harnesses ask whether you have ms45.1 or ms43... maybe i will just end up doing the ms43 conversion
@GaragE36ukАй бұрын
@Thomas-fc6gf if they offer the adapter loom for the ms45.1 then it should be plug and play for you mate.
@iftar9158Ай бұрын
hoping this is a good starting point for this conversion for me
@GaragE36ukАй бұрын
It is pretty straight forward, if you have any questions when you are doing it just drop a comment and I will help if I can
@clutchtribe4094Ай бұрын
Glad I came across this video kinda have an idea of how to swap mine, I’m going from a obd1 m50 to obd2 m52tu
@GaragE36ukАй бұрын
Glad I could help. If you have any questions while doing it I am always happy to answer.
@clutchtribe4094Ай бұрын
@@GaragE36uk ok sure thing I’ll let you know
@GaragE36ukАй бұрын
@@clutchtribe4094 no worries
@HEAVYHITTERZSKYBOXАй бұрын
Does it work on obd1
@GaragE36ukАй бұрын
I wouldn't think so but I can find out.
@joefromdover300Ай бұрын
I will be in touch for sure
@joefromdover300Ай бұрын
Video was perfect, everything i needed to understand how it works. Thank you
@GaragE36ukАй бұрын
Thank you Joe. Really glad to have helped
@arronjones6985Ай бұрын
Brilliant. Now put the air box back on it.
@GaragE36uk14 күн бұрын
Was put back on after
@rady1349Ай бұрын
Hi I feel this vibration completely inside the car. Both standing and moving.
@GaragE36ukАй бұрын
Is the flywheel good? Torqued to correct settings? Something like that is very hard to diagnose without seeing the car
@Thomas-fc6gfАй бұрын
How did you do this with an automatic transmission harness? Did you run wires for your reverse light ?
@Thomas-fc6gfАй бұрын
And what values did you have on your compression test? Would it be ok if one cylinder runs at 130psi
@GaragE36ukАй бұрын
Depends what harness you use. I put the reverse light wiring in
@GaragE36ukАй бұрын
@Thomas-fc6gf what are the rest of the clyinders? You want them all to be close or with 10% of each other.
@miltjkАй бұрын
finally installed an e36 or e30M40 refrigerator?
@GaragE36ukАй бұрын
Refrigerator? You mean Aircon?
@miltiadispant.7249Ай бұрын
No, i mean coolant radiator
@miltiadispant.7249Ай бұрын
Sorry for refrigerator 😂
@GaragE36ukАй бұрын
@@miltiadispant.7249 😂
@GaragE36ukАй бұрын
@@miltiadispant.7249 ah 😆 I used the standard m40 radiator on that one.
@rady1349Ай бұрын
Hi I have vibration at 2200 to 3500 rpm after upgrading the engine from 2500 cc to 3000 cc please help Thank you for your kindness
@GaragE36ukАй бұрын
Hi. What sort of vibration, can you pin pont it to any location within the engine?
@kuheylansahin8516Ай бұрын
BEAU TY FULL!!!!! the classic of the future!
@GaragE36ukАй бұрын
Yes definitely mate.
@jamesmcpherson5468Ай бұрын
Any further forward with the build lads? Sorted out the prop?
@GaragE36ukАй бұрын
Havent touched it in ages mate. However got a prop last week to have modified to fit, hopefully some progress in the next 6 weeks.
@jamesmcpherson5468Ай бұрын
@@GaragE36uk look forward to it! Like all good builds, they take time👀😜 Which prop have you gone for?
@GaragE36ukАй бұрын
@jamesmcpherson5468 just got a prop that matched the output of the box, so I'd assume 330d/530d, we will use the front half of it and have it welded to the rear half of the front section of an e36 prop. Rear section will remain standard then.
@benji6833Ай бұрын
Are you the Real k3bab? 😮
@GaragE36ukАй бұрын
Lol no. But I do know the real K3bab
@benji6833Ай бұрын
@@GaragE36uk ooh okay xD
@TwistedTattoo.WarShortsАй бұрын
👍
@user-mu1rw1qr2uАй бұрын
All it needs a an oil change & filter, good vid tho👍
@GaragE36ukАй бұрын
Oil and filter changed regularly
@adkenzo2 ай бұрын
Always wanted to try the bcs but there saucy enough price wise 😭
@GaragE36uk2 ай бұрын
Yes they are not cheap, £800 I paid a few years back. These maxpeedingrods seem good so far tho.
@adkenzo2 ай бұрын
@@GaragE36uk yea be interesting to see how they go I had those jom ones in mine the worst things ever haha
@GaragE36uk2 ай бұрын
@adkenzo at the moment these don't feel any different than the bc's, but I am going to give them a couple of weeks and then do another video with my opinion on them
@adkenzo2 ай бұрын
@@GaragE36uk cheers will keep an eye out
@TwistedTattoo.WarShorts2 ай бұрын
📞 I have a crime to report 😅 someone has stolen Gary's beard 😅 good video iv 👍
@GaragE36uk2 ай бұрын
Ah don't you start, that was my younger brother ha ha. No I messed if up shaving, so it had to come off. Don't be jealous because you can't grow one.
@TwistedTattoo.WarShorts2 ай бұрын
@GaragE36uk 🤣🤣🤣 I can grow one they just do my head in iv itchy as fuck
@GaragE36uk2 ай бұрын
No you can't do lie lol
@TwistedTattoo.WarShorts2 ай бұрын
@@GaragE36uk 🤣🤣🤣
@TwistedTattoo.WarShorts2 ай бұрын
👍
@TwistedTattoo.WarShorts2 ай бұрын
Gooooooooo😂
@GaragE36uk2 ай бұрын
😆
@jabaghstash77842 ай бұрын
Which ecu did you use ? I have the eco from e30 318is or should I use the e36 one ? Thanks
@GaragE36uk2 ай бұрын
I used the e36 one that came with the engine. But don't see why you couldn't use the e30 one, they are both m42 engines so probably run same ecu anyway. Also I fitted a very early m42 e36 engine which is basically the same as the e30 one..
@whatisthistho25 күн бұрын
Hi, just buttoned up our swap m42 in e30, But i wonder if the m42 possibly could have ews? Ignition/cranking is fine but no fuel pump and no spark. Coils have + and - but no signal, any ideas?
@GaragE36uk25 күн бұрын
@@whatisthistho depends what year the engine is from. Think ews would been in play in 1994, and would have been a silver label ecu from memory. Would need to double check that tho.
@assadashiq9312 ай бұрын
Fucking did it alright 😂
@GaragE36uk2 ай бұрын
Was his first drift day
@TwistedTattoo.WarShorts2 ай бұрын
😈
@TwistedTattoo.WarShorts2 ай бұрын
😢
@blackmagic9982 ай бұрын
Shame the music wasn't louder
@srwilbur2 ай бұрын
And without the engine running!!!!!!!!😮
@GaragE36uk2 ай бұрын
The rpm gauge is just not working. Do you think it's being towed?
@devthethi31612 ай бұрын
Why the revs aren’t going up
@GaragE36uk2 ай бұрын
Didn't have the rev counter wired in for some reason..
@TwistedTattoo.WarShorts2 ай бұрын
Awesome iv👍
@GaragE36uk2 ай бұрын
Old one from a few years back Trims, just clipped it out of one of my old videos. When do you want these brakes fitted, I keep falling over them in the garage 😆
@TwistedTattoo.WarShorts2 ай бұрын
@GaragE36uk sorry mate I no I need to get it sorted just been stupid busy in work need to get some time off soon been mental
@GaragE36uk2 ай бұрын
@TwistedTattoo.WarShorts you do mate, they will be metal on metal soon.
@TwistedTattoo.WarShorts2 ай бұрын
@GaragE36uk I no iv 🤣 I'll let you know need to get it serviced as well at the same time
@GaragE36uk2 ай бұрын
@@TwistedTattoo.WarShorts yes sound trims no worries.
@pogfgfpo13042 ай бұрын
theres no need ro redline the engine for making burnout...
@atherus24152 ай бұрын
Blabla who cares
@GaragE36uk2 ай бұрын
You are right, there is not any need, but it sure sounds good.
@rahnastoRR2 ай бұрын
@@GaragE36ukDamn right it does
@TwistedTattoo.WarShorts2 ай бұрын
😈
@loudwrenchdude2 ай бұрын
I feel at home watching this
@GaragE36uk2 ай бұрын
Thanks mate.
@TwistedTattoo.WarShorts2 ай бұрын
👍
@hitmanlife16982 ай бұрын
what is the price of your engine?
@GaragE36uk2 ай бұрын
The engine that came out of the car is dead. Has been weighed in.
@thehellboy5672 ай бұрын
Anymore progress since this video?
@GaragE36uk2 ай бұрын
Not yet. I will get back onto it in the summer. To many projects, not enough time..
@TwistedTattoo.WarShorts2 ай бұрын
👍👌
@jabaghstash77842 ай бұрын
Hey ! Is there any difference between m42 from 91 and m42 93 e36 ?
@GaragE36uk2 ай бұрын
The 93 one may have a different pulley and alternator set up with a skinny auxiliary belt rather than the thinking one.
@jabaghstash77842 ай бұрын
Thnx ! One more question! I bought m42 from e36 with the ecu , will the ecu work on my e30 ? Or i should buy an ecu from e30 318is ? Many thnx
@GaragE36uk2 ай бұрын
@@jabaghstash7784 you will just need the ews removed from the ecu if it has ews on it.
@jabaghstash77842 ай бұрын
Thnx for answering ! Really helpful while im doing the swap ! I read on a form that i need coil packs and HT leads or COP conversion? But i see you used the m42 e36 ones , should i be fine using the same i have on the engine ?
@GaragE36uk2 ай бұрын
@jabaghstash7784 the standard m42 ones are fine.
@Mr_BUSINESS_24_72 ай бұрын
Can this be done with a ZHP engine ? Sounds like a dumb question, I know. But i was looking at the pre-fab harnesses out of Portugal in ebay and they said something to the effect "not for MS45..." And I can't remember if rhe zhp motor uses MS45
@GaragE36uk2 ай бұрын
I don't know a great deal about the zhp motor, we didn't get them in Ireland of the UK. I'm not sure if it runs ms45, but if it does I can't see any issues with converting it to run on ms43 with a tune.
@Mr_BUSINESS_24_72 ай бұрын
@@GaragE36uk can you manipulate the tune ? I know you can delete the post cat oxygen sensors, EWS and radiator outlet temp sensor among other things. And if you are able to change the tune, I'd imagine you'd need to know the map that the ZHP uses; somehow ? maybe the ZHP can run on the regular 330i tune ? I mean it's only 10 HP more. The only reason I ask, is because I came into a zhp motor for free because my friend didn't want it. ... head bolts pulled up out of the block. So I'd need to timesert the block and check the head out.
@Renhumble3 ай бұрын
Great video, will definitely be using this for my e36 build. Just curious, have you ever swapped the e46 6 speed into a e36? Interested to see if that’s possible same time with the m54b30 swap.
@GaragE36uk3 ай бұрын
Thank you for the comment. I have not fitted a 6 speed box in them, but yes can be done, you would need the prop shaft modified
@evergaona11113 ай бұрын
How about friend, would you have some diagram to make the connection of the cables, to splice them?
@GaragE36uk3 ай бұрын
Hi mate. I just use the pinouts for the x60004 and the x20, then join what's needed. I'm pretty sure there's a few videos on here of how to wire them up. It's a long process, hence why people buy adapter looms.
@rady13493 ай бұрын
Hi Hello What type of injector should we use when upgrading? m50b25 to m50b30 Tnx
@GaragE36uk3 ай бұрын
Hi.. I have used the m52b28 pink injectors on this one..
@lolitagupta22013 ай бұрын
In EU we got the 2.0 version single vanos of the M50 carefull with that intake. It wont fit proprelly. It will fit on the 2.8 but has a small gap ( cilinder head ports to big for the M50B20 Intake) its possible to make it work but if u work into problems u know what it is. Just leaving it out there so no one deals with the same problem as i did.