This is one of the best automotive repair videos I've ever seen. Music started getting to me after a while, but awesome camera work angles, lighting, explanations, detail. Excellent. Thank you!!
@mammutit3 жыл бұрын
if you use a rubber belt type oil filter wrench you can hold the drive shaft easier
@bvvbvv6010 Жыл бұрын
I have e90 330xi 6 speed and every time I come to stop sounds like car shifts down 3 times,is it this problem?
@friguy44443 жыл бұрын
Nice video. That's not the end that usually people need the help with though. It's usually the center support bearing that people need to replace. The rear connection to the Differential is something I can't find any info on.
@kellyanderson7115 Жыл бұрын
Nice video. Do you know how to get the flange off the front output shaft? For some reason I can't seem to figure that out. I have a 6spd/transfer case that I want to replace all of the seals on.
@davidaranda18624 жыл бұрын
Did you put the car in neutral or did it just have to have the wheels able to spin
@DeerailBeatz3 жыл бұрын
What size socket did you use to remove the driveshaft screws??
@JonnyBlazeTCB2 жыл бұрын
You ever get a response?
@bmwfast50i322 жыл бұрын
E12 i think
@bmwfast50i322 жыл бұрын
@@JonnyBlazeTCB it’s e10
@mikesfixitgarage17003 жыл бұрын
I have 2006 BMW X3 and replaced front drive shaft which is the only year it is shorter and has. Spacer but drive to receive was normal size and fit right in with out spacer, do I need to use spacer, thanks
@djrodriguez65829 ай бұрын
Hey did you ever find out if it works without the spacer?
@bralewidowdan29878 ай бұрын
Main thing is to diagnose the problem. Replacing with this kind of help is going to save you couple grand. Great video!
@Redaxted4 жыл бұрын
Is this similar to the lower steering shaft? I can’t find any videos to help me with that DIY.
@khelvhin Жыл бұрын
Is this thesame for a 17 240xi, looking to do mine very soon
@Jacob-ny6if8 ай бұрын
I have an Xdrive car is there any way to tell if the front drive shaft has failed or the rear?
@compasstrans2 жыл бұрын
Can you tell me what would be done differently on f15/f16 for the front shaft. Not sure how shaft will come off on transfer case side. Thanks.
@richardcubis2822 Жыл бұрын
Can I use my BMW without front drive shaft because crossjoints are wornout already..
@sebastianjungle3 жыл бұрын
i boght a bmw 320. it is missing the front pro shaft i want to know if i can still drive it without it bmw service said yes as is not longer a xdrive somone removed the fron one for a reasone. any adivce please
@rdcanyon Жыл бұрын
great video. I have this exact issue on my BMW x3 e83. ordered the part to be fitted next week. Thanks for the video!
@haasinkarajic39416 күн бұрын
How to change on e61 530xd LCI rear UJoint?
@frankiewilliams18946 ай бұрын
Garrett Man your Videos are Life Savers!! Your level of explanation is on Point!! I salute you Sir!! Blessings
@fcpeuro6 ай бұрын
Glad you like them!
@perrijanis4 жыл бұрын
Hello from Spain. After replacing that part, has any more part had to be replaced or repaired? Transfer, differential ...
@williamgonzalez19394 жыл бұрын
Can I eliminate de front wheels I have a 2013 535i xdrive and I have to replace the front drive shaft and it also broke the oil pan
@PrecisionBimmer3 жыл бұрын
How do you do this on a 2011 x5 35i ? There are only 4 nuts on the end connected to the engine and none on the end connected to the differential.
@garysmith5416 Жыл бұрын
Will the car pull with the front shaft out?
@bronxbmw6255 жыл бұрын
Ive been looking for the front drive shaft and can not find it for my car a 2009 e92 335 xdrive and the only 1 i found says no eta and it was for the rear 1
@IshinuK6 жыл бұрын
Great video, really helpful. I just did this to my car but noticed that the Trasnfer case is leaking from where the Driveshaft connects. Is it possible that it got damaged from my bad Driveshaft? If so, would there be a seal that could be replaced? or do I have to replace the whole Transfer case?
@jsm32334 жыл бұрын
Have the same issue. Did you ever resolve it?
@IshinuK4 жыл бұрын
@@jsm3233 It's been 2 years, but if I recall correctly, there was a seal that I replaced right where the Drive Shaft connects to the transfer case.
@jsm32334 жыл бұрын
Hina's Corner thanks
@TommyislameАй бұрын
Hey , I’m having the same issue rn, what’s the seal called? And what does it look like?!
@armnloaded874610 ай бұрын
How many bolts do you need?
@ssdtrain14 жыл бұрын
my 2005 X3 transfer case flange doesn't move back and forth like that one??
@tgmod6 жыл бұрын
Is the transfer case yoke flange a slip on style? Or is it bolted on?
@gmakutube7 жыл бұрын
Is there a technique to getting the front driveshaft to rotate in order to remove the bolts? I mean, if it doesn't seem to want to rotate, what should one do to get it to disengage, or go into neutral, or whatever you want to call it?
@fcpeuro7 жыл бұрын
The easiest way to spin the drive shaft is to leave the transmission in neutral. If the transmission is gear it will not be possible to spin the forward drive shaft.
@gmakutube7 жыл бұрын
Thanks.
@luisliberato14936 жыл бұрын
I have a question both side are the same it doesn’t matters what side you put on ??
@kingant1777 Жыл бұрын
How do I know the right size drive shaft to order for a bmw x3 2005 3.0i engine
@mokhaz9372 Жыл бұрын
Did you figure out what size you need for the drive shaft?
@wxviewer5 жыл бұрын
What are the symptoms(sounds/noises) of this issue? My 2008 E92 had a horrendous metallic rattle that was synced with wheel speed. When I would push a wee bit of acceleration the noise would quiet down until the acceleration died off. It sounded really obnoxious. The mechanic told me it was the front drive shaft, broken at the Transfer Case.
@aimized14602 жыл бұрын
Really bad vibrations depending which shaft it is the front or the rear one if you fail to repair the broken one it could lead the other one to break also… from what you wrote it could be something within the whee like a wheel bearing or perhaps your brakes are rusted up hence not letting go off fully
@techguy16786 жыл бұрын
Do the front and rear driveshafts have to be aligned in a certain orientation when working on an Xdrive model? Mainy an F10 550i XDrive.
@Alpha_B954 жыл бұрын
Is it possible to install the driveshaft in backwards? I just replaced the front carrier assembly and now it doesn't shift right and kinda sounds like a slight gurgle/slight grinding noise.... Thanks in advance..
@fcpeuro4 жыл бұрын
Hi, Brendan. The driveshaft can be installed either way. First thing to check is your transmission or diff fluid level, sounds like it could be low on fluid.
@Alpha_B954 жыл бұрын
@@fcpeuro I checked my front carrier assembly n that's fine. I just filled a day ago. Differential fluid probably needs changed I just checked it's black.. but I never had this issue prior to replacing front carrier assembly...
@FreshieAlbanian4 жыл бұрын
Is it possible to reach the drain plug on the auto transmission with this in the way or will I have to remove it?
@dcblyke4 жыл бұрын
Just did my transmission service on my e60 xdrive. Yes, you need to remove the front drive shaft to access the fill plug on the transmission.
@Norasbestyoutubechannel7812 жыл бұрын
What are symptoms?
@frankiewilliams18946 ай бұрын
How do I view your other videos Please??
@fcpeuro6 ай бұрын
They are all listed on this channel!
@hacksys16 жыл бұрын
Do you have the part number on the ZNS bolts or Link to get them Need to do this; this weekend and would like to order some new bolts for it. Thanks
@fcpeuro6 жыл бұрын
Hello Isaiah, here's a link to the ZNS bolt. www.fcpeuro.com/products/bmw-torx-screw-with-ribs-26117529387
@jmojameson7 жыл бұрын
Great video, very clear and straightforward. Just had the same thing happen to my car and this really helped. Keep up the great work and thank you for the video!
@zebedee237 жыл бұрын
How do you know when these are going my e92 328 x drive is making noise up front and already replaced wheel bearing and got new tires
@fcpeuro7 жыл бұрын
A common symptom of a failing driveshaft is a very noticeable shaking coming from underneath the vehicle. You may also hear clunking or squeaking.
@nicholashanson74066 жыл бұрын
Would the noise be happening at all times, or only when it's in gear?
@brandoneng91005 жыл бұрын
Does anyone know the part number for that splash shield?
@stanislavhristoskov51747 жыл бұрын
Hey there ! Can i drive my e92 325xi without my front drive shaft ? Is there any chance to get demage on the car ? I am looking from 2 weeks for any possible option to turn my car intro rear wheel drive. I really dont like 4x4 anymore.
@Hope4NewDay17 жыл бұрын
The idiot before me removed the driveshaft on my 335xi. You can drive it around without it. Just make sure its covered. Also pull fuse 24/50 (Might be fuse 26 and 50) in the glove box to disable the xi/xdrive system so you dont get the 4x4 AWD error if you try to dyno, drift, or do burn outs.
@rebeccahanson98645 жыл бұрын
Yall may not see this but i was told it would cost me 750.00 to replace this part. They said it would be bad on the transfer case and be dangerous if i didnt replace it. Am i being lied to or could it be a possible danger?
@Franz-ci3bd6 жыл бұрын
Hello FCP, can this problem cause shaking steering from about 50 mph that get worse at highway speeds? My shaking is not constant, it may appear or not to appear. Rims and tires are ok, brake discs are ok, already replaced strut arms and bushings and all shock absorbers and their mounts. No play on suspensions or outer tie rods, just a small play on left inner tie rod but dealers and mechanics say that this can't cause my shaking. Thanks
@fcpeuro6 жыл бұрын
Yes, it's possible the driveshaft could cause the shaking.
@Franz-ci3bd6 жыл бұрын
Thanks!
@d1malo3895 жыл бұрын
@@Franz-ci3bd Hey man, please could you tell me if you have sorted your shaking? Getting same vibration which is most prominent 60+mph and when I turn when to the right side. Can transfer case cause it, just want to know how you managed to sort yours
@franciccio49835 жыл бұрын
@@d1malo389 Hey mate, I had the main shaft replaced under warranty from the dealer. The issue is still there but reduced a lot. As I'm tired to try to fix the issue totally, I won't do any other replacement (i have replaced also tension struts and shock absorbers).
@d1malo3895 жыл бұрын
@@franciccio4983 you are going through a lot! Does your shaking increases when you turn steering wheel slightly?
@napoli.4life3 жыл бұрын
what are the torque specs for a 2008 535xi on these bolts ????
@butcherbaker42583 жыл бұрын
Same
@Tony-jv5pr2 жыл бұрын
I think you help me to understand the X5 F15, thank you.
@danwilliam79957 жыл бұрын
What kind of socket is that for the driveshaft bolts?
@fcpeuro7 жыл бұрын
E10 Torx.
@accidentalheadclunkers85175 жыл бұрын
FCP Euro was an E12 on my 2006 X3
@isrealperez90694 жыл бұрын
What was the problem with and why would you change it
@fcpeuro4 жыл бұрын
shaking / vibration from the drivetrain
@rudeboy87877 жыл бұрын
Can you post a video on how to remove the transfer case on a e90?
@fcpeuro7 жыл бұрын
Hello Dameon, we'll look into adding that one.
@T2VR7 жыл бұрын
So it has been discovered on forums that removing this makes your x drive car RWD with no codes. Can we see some testing?
@marklashko66747 жыл бұрын
I doubt FCP would test this, but I'm actually going to test it out myself right when spring hits. Ill post results on e90post.
@T2VR7 жыл бұрын
Mark Lashko I am doing the same.
@fcpeuro7 жыл бұрын
Removing the transfer case motor will make the car rear wheel drive. However, there will definitely be codes stored in the transfer case control module and possible the ABS system since they are both tied in with one another. These codes would be BMW specific module faults and not standard OBDII PO faults you can read with a generic scanner.
@marklashko66747 жыл бұрын
FCP Euro How would the transfer case know that the drive shaft is out? There are no sensors connected to it.
@T2VR7 жыл бұрын
Mark Lashko removing the front drive shaft disconnects power to the front wheels, but the transfer case still moves. You'll be RWD but will have some power loss
@nickybld7 жыл бұрын
How much does that run you to replace? I have an e90 335xi
@fcpeuro7 жыл бұрын
Good afternoon Nicholas, here is the part on our website (www.fcpeuro.com/products/bmw-driveshaft-front-26207629987), in terms of labor and such, it will vary as you know, or it will be free of course if you do it yourself.
@PovertyDIY Жыл бұрын
I just twisted my prop shaft on my 535i x drive. It was glorious.
@fcpeuro Жыл бұрын
😮
@franciscoecheverria23826 жыл бұрын
Does any one knows where can i find a video to replace transfer case on 2007 bmw 328 xi.
@anthonyvargas10745 жыл бұрын
Francisco Echeverria the whole unit or the motor?
@jon43044 жыл бұрын
Love FCP! Y’all are incredibly helpful, but!!! What is the music for this video??!! I must know!
@fcpeuro4 жыл бұрын
We love you too, Jon. Glad we can help! Due to copyright laws, we use royalty free music tracks in our videos, such as this one. Honestly, I wish I could tell you what track this is :( I'll do my best to find out for you, but no promises!
@archaichero81424 жыл бұрын
Music is "Snow Walk" by Dominant
@Hope4NewDay17 жыл бұрын
What are the part numbers for the bolts?
@fcpeuro7 жыл бұрын
The part number for the bolts is 26117529387. www.fcpeuro.com/products/bmw-torx-screw-with-ribs-26117529387
@andreagamba95397 жыл бұрын
Great video! Did you change ever engine mounts on the same car?
@fcpeuro7 жыл бұрын
Hello Andrew, the engine mounts were not changed.
@devildogae8 жыл бұрын
awesome video! keep up the good work and videos coming.
@fcpeuro8 жыл бұрын
Thank You!
@eaemerson48527 жыл бұрын
Going through the same woes; excellent video. Thanks.
@fcpeuro7 жыл бұрын
You're welcome!
@paytons67676 жыл бұрын
Amazing video thank you!!!
@shawnzhang5796 жыл бұрын
Is that a 1/2 inch dewalt impact wrench?
@fcpeuro6 жыл бұрын
Yes it is
@d1malo3895 жыл бұрын
Great video!
@fcpeuro5 жыл бұрын
Thanks, Dimitrij!
@d1malo3895 жыл бұрын
@@fcpeuro Was this vibration consistent or after certain speed, I get weird vhoozing vibration after 60+mph and strangely enough when I turn steering to the right more prominent, really weird. Would appreciate any advice
@Aardvark498 жыл бұрын
Adding on a transfer case fluid change would be a good "while you're in there" move. Would love to see you use safety glasses.
@fcpeuro8 жыл бұрын
The transfer case fluid change was shot at the same time! That will be posted very soon.
@Aardvark498 жыл бұрын
Thanks, will look for it.
@fcpeuro8 жыл бұрын
You're welcome Victor
@gregoryparrish42206 жыл бұрын
dude you are awesome
@johnflann24203 жыл бұрын
Great video, shame about the music. Made it difficult at times to hear your dulcet tones! Helped me no end, Thanks!!
@fcpeuro3 жыл бұрын
Glad it was helpful sorry about the music!
@fredfrederickson3 жыл бұрын
I like the added music to this diy 😊
@its_me_lo11425 ай бұрын
10:40 amen 🙏 😂😂😂😂😂
@smilez180ify Жыл бұрын
Dang I never thought it could be this I always thought it was my axles.
@ashalikhan210 ай бұрын
Music not loud enough!
@bigjose83584 жыл бұрын
One problem that i hate if your buying the shaft.... Screws should be included ! Because they need to be changed this happens with a lot with Fcp parts ...Twice i had to go out to bmw to get screws customer should not have to think about this ...😑
@bmwsincekid6 жыл бұрын
There is no way to Repair the drive shaft without actually Replacing the whole as for my car it cost 860€
@callyourgeek2 ай бұрын
bro the music over powers you instructions.
@XxAzraelTheAngelxX10 ай бұрын
I’m still gonna use the same bolts lol
@TheSchoeMaker8 жыл бұрын
I literally just had to do this on my 06 330xi. Relatively easy job.
@MigySaan5 жыл бұрын
Hey i know im 2 years late lol but i need to do the same thing we have the same car do you have any tips?
@rubondomoralez17695 жыл бұрын
8/10 as a pro shouldn't you have some work glasses on and FCP , please get this guy a mic .....