How to Test a Bilge Pump | Bilge Pump Not Coming On | Bilge Pump Float Switch Test | Boats.net

  Рет қаралды 44,233

Boat Parts

Boat Parts

Күн бұрын

See how to test your bilge pump and how to test your bilge pump float switch in this video from Boats.net.
The trouble with testing a bilge pump is its location. They’re generally in the lowest part of the boat so that they can pick up the largest amount of any water that comes on board.
In this video, John will start out showing you how to test a bilge pump using a multimeter on a three-way switch, and we’ll do it at the physical switch itself. In this setup, the bilge pump float switch test is completely separate from the bilge pump test since they’re two separate units. We can check to make sure the circuits are intact, and that will give us a good idea of the health of both the pump and switch.
In our second setup, we’ll test a completely automatic bilge pump with an internal switch. This pump setup has just a simple on/off switch. Here, we’ll run through the battery, the fuse, and the switch itself. Then, we’ll show you how to use a resistance test to check out the pump itself. John will also show you how this particular pump has a touch point that allows you to test if the pump is working.
In our final test, we’ll submerge the bilge pump to test the switch.
Read how to test your bilge pump step by step: www.boats.net/...
Check out the Rule Industries Superswitch used in our first setup: www.boats.net/...
This is the Rule Industries automated bilge pump we used in the second set of tests: www.boats.net/...
Find outboard parts here:
www.boats.net?BDN
Talk to us:
Twitter: / boatsnet
Facebook: / boats.net
Instagram: / boatsnet

Пікірлер: 4
@VeniceInventors
@VeniceInventors Жыл бұрын
Thanks, the part at 4:18 about testing the floater switch without having to disconnect it is what I needed.
@hooks4nooks
@hooks4nooks Жыл бұрын
Great video. Thanks a lot. This will help trouble shoot my bilge pump on my brand new boat. Lol. Hope it's a fuse.
@breamhook
@breamhook 2 жыл бұрын
I have a question. What makes my bilge pump make a humming noise for about a minute after I turn the key off. I don’t hear, or see water coming out of the hole on the side of the boat. Also when I pull our boat out of shelter and go about 20 miles to the store to get gas our carpet will be real wet near the back of the boat. We have a 2000 model Bass Tracker, with stick steering. I can’t see the bilge pump for the large gas tank. Thanks for any tips!
@michaelwallace7587
@michaelwallace7587 11 ай бұрын
My fuse is buried in my conceal. You have to pull the trolling motor batteries to reach it.
Why I learned to hate automatic bilge pumps
10:35
spelunkerd
Рет қаралды 10 М.
Боксёр воспитал дикого бойца!
01:36
МИНУС БАЛЛ
Рет қаралды 4,9 МЛН
Делаем с Никой слово LOVE !
00:43
Привет, Я Ника!
Рет қаралды 4,5 МЛН
I Spent 100 Hours Inside The Pyramids!
21:43
MrBeast
Рет қаралды 78 МЛН
Finding a WATER LEAK In A BOAT!
9:02
Born Again Boating
Рет қаралды 282 М.
Boat Electrical: How to Wire a Bilge Pump
16:26
Clark's Adventure
Рет қаралды 79 М.
How to use a multimeter like a pro, the ultimate guide
12:55
James Gatlin
Рет қаралды 2,9 МЛН
Don’t Buy An Automatic Bilge Pump Till You’ve Watched This
8:40
Boat Fittings
Рет қаралды 110 М.
How 3 Phase Power works: why 3 phases?
14:41
The Engineering Mindset
Рет қаралды 2,2 МЛН
How to Test an Automatic Bilge Pump and 3-Way Bilge Pump Switch
6:17