Bobcat 773BCIS override no hydraulics fix Part 2

Bobcat interlock control system failure fox and repair without spending big bucks. Do at your own risk.

[@jcqsvntr]

You Legend, sitting with this exact problem, thanks !!

[@justatool]

That's what my 873 is doing, the valve light is flashing and I have no tilt or lift, thanks for the video, it gives me hope.

[@wrongspeak1104]

You're the man. Thanks for the info!

[@ronaldcoleman4902]

Great job 👏

[@joshferro1337]

Brilliant mind

[@Depression2010]

I have a 773G. It is probably a bit newer and it has Lap Bar control sensor. When it thinks the lap bar is not in place all hydraulics including moving gets disabled. I can click on traction override which allows me to move machine for short period of time before locks out again and alarm goes off. Lap bar sensor and housing been changed. Any suggestions would be appreciated. I would be happy to contact you directly if you provide info or you can contact me. Let me know. Thanks.

[@williamblack5056]

Could you show where you run the main hot wine for the bypass not a good view where it attaches Thanks b black

[@michaelbartels1940]

I ran the main hot wire to the battery then up to the switch, then down from the switch to all the solenoids.

[@eddyguillen6741]

Nice to meet you I have a Bobcat 773 It does not have the strength to lift the bucket or the main cylinders, those solenoids are disconnected, is that why?

[@TheRchunter57]

I have a 753 f series, with the metal hand controls. What's the difference between the metal and nonmetal controls? Would like to use your idea, but don't want to fry something else. Dealer quoted $2100 for the lift control box. Wow.

[@kyawhtin6949]

Hi Mike, My bob cat 773 (same like in your Video) aux hydraulics not working but BCIS is working. Main boom and bucket controls working. It used to work before perfect and all of a sudden the aux hydraulics stop working. When you turn the switch on the handle the engine not change the sound. How can i proceed to trouble shoot the issue. You reply is appreciated. And after that the engine starter will not work when you turn to start from ignition. It happens all of a sudden from working correctly. Can you help me guide to solve. Thank you.

[@ashbyfarms]

Is there a way I can contact you directly? I have exactly the same issue with a 753 series F, but I need some more direction.

[@michaelbartels1940]

You can email me [e-mail] leave a comment here when you do email me with your phone number do not check my emails very often.

[@buildit736]

Michael, sent you an email. Thanks.

[@danwright5737]

How did you hook this up? Is there another video?

[@michaelbartels1940]

Yes I did two videos

[@danwright5737]

@@michaelbartels1940 Where can i find the video?

[@michaelbartels1940]

@@danwright5737 kzbin.info/www/bejne/pZLQhGl7jsZ-bJo