Boeing 306-C Flying Wing - First Flights

This film features the build and first trim session of the 44" free-flight rubber-powered Boeing 306-C, a twin-pusher flying wing that was an unbuilt, concept design aircraft by Boeing in 1935. The model was inspired by the paintings of Jared Zichek, and the 21" rubber-powered plan of the Boeing 306-B by Pres Burning.
I was given a 36" rubber-powered model of the single engine version, the 306-B, from the estate of the late Dallas Cornelius. I had intended to fly his beautiful model this summer, to give her some air again, but instead, I became inspired to build my own, opting for a larger twin-pusher version, the 306-C.
Inspiration also came from the Lippisch P-13, rubber-powered design by the late, great Don Srull, whose rib designs were employed for this project.
I wanted to keep this model as clean as possible, so I decided to keep the rubber motor contained within the wing via a sheeted rib box. With only an inch of clearance at the high point of the airfoil, I grew concerned for the ability of the motor to fully unwind without bunching, which could then easily alter the flight path. I needed consistency for these twin motors, so it was decided to go a bit shorter with the rubber, than originally intended. Still, the motor is 3X the hook to peg distance. I also used a 1/2" piece of surgical tubing at the prop hook to act as a spacer, which helped to prevent the rubber from climbing the prop shaft.
The model performed well on its first time out, so I'm excited to see her potential as I reach max winds of 1200 turns. Happy man!!
Filmed with a Canon PowerShot SX20, and an iPhone 11Pro & 14Pro on 5.18.23 in Wawayanda, NY. Music by Ben Linwood & Noam Zaguri via ArtList.
Pres Bruning plan of the 21" Boeing 306-B: hallmanstudio.com/Bruning_BOEI...
Photo showing Srull's Lippisch plan & Cornelius's 36" Boeing 306-B: hallmanstudio.com/Lippisch_Boe...
Film of Dallas Cornelius's Boeing 306-B in flight: • Rubber-powered Boeing ...
For more info on free-flight rubber-powered models, check these websites:
brooklyn-balsa.square.site
www.easybuiltmodels.com/
www.volareproducts.com/BUY/
www.flyingacesclub.com
National Free Flight Society - freeflight.org/
Mike Stuart's Flying Scale Models - www.ffscale.co.uk/
www.freeflightsupplies.co.uk
Flying Aces Club merchandise: www.cafepress.com/flyingacesclub
All profits support Flying Aces Club activities.
Center of Gravity merchandise: www.cafepress.com/centergravity

[@williamrobinson7435]

So THIS is what you've been up to! After a 3 month build, you must be delighted with this result. We rely on you Tom to push the boundaries of possibility and you've certainly come through with this beautiful 44" twin pusher. Simply stunning, and I'm sure I speak for everyone in looking forward so much to seeing more flights with this exceptional plane. Hearty congrats on this huge success! 🌟👍

[@maxfliart]

Yes, William. Ha. Focus was on the build and not making films. Time well spent, as the ship is a dream.

[@tomdurkin7321]

You must tell me how I may acquire a set of the 42 inch plans like in your building video, great job

[@NateG3678]

This channel never disappoints. You show how amazing our hobby is and why it never gets old.

[@donlawrence1428]

a twin flying wing. That is quite an accomplishment!

[@juliobosco4241]

From Argentina. Congratulations dear Max. You are a genius.

[@tomcoryell]

Rubber free flight has to be my favorite form of aircraft modeling. To build a twin engine pusher and to have it fly so well is an impressive accomplishment!

[@maxfliart]

Thx, mine too. Love it.

[@fierceflyer5]

She’s a beauty, great flights.

[@GrotrianSeiler]

Yes, the music and the editing is better than any yoga class. Cheers

[@alfred.g7521]

I fly big rc warbirds, but you just can't beat this level of pure fun and skill.

[@robertstark3326]

Absolutely incredibly fantastic!!! The construction, the design of the plane, and those incredible flights.

[@slim1228]

Wow! You're certainly not one to shy away from a challenge - building or flying - are you, Tom? Your twin flying wing is a rare beauty on the ground, but even more so in the air. She should garner some serious bonus points. Thanks so much for sharing!

[@Machia52612]

I’ve always been fascinated with the concept ideas of the Aircraft companies especially in the 1930’s era. Watching you bring this concept to life was a lot of fun. Wether you realize it or not, I think you missed your calling as an aeronautical engineer. Perhaps you are! A beautiful build and impressive aerodynamic problem solving.

[@leonardwilliams8109]

My third time to watch this video. Never get tired of seeing the wing fly!

[@maxfliart]

Thx, Leonard, I never get tired of launching her. She has been a dream.

[@OldMtnGeezer]

Most excellent! Beautiful build, beautiful flying! Love to see kids in my ... uh ... "age category" still getting a kick out of building & playing with toys! 👍👍👍

[@maxfliart]

Haha...yeah, how did *that* happen so fast?? I still feel the energy & creative passion of a 20 yr old. Thx for the kind words. Glad u enjoyed it.

[@scottfw7169]

Pass over camera at 4:54 was pretty cool.

[@kenkingsflyingmachines2382]

I invariably shake my head and go back to the workshop. What a masterpiece. And your field is perfect. Its taken a few years of watching your videos to figure out that the wind I've been avoiding flying in are thermals. You always teach me something. Thanks!

[@nilim9606]

it's always a pleasure to meet you, with models built to perfection.

[@donaldvincent]

Fantastic! Boeing should be filled with envy.

[@stephensowell9578]

That was what I wanted to say: fantastic. I do not recollect seeing anything about the Boeing 306-C, but it looks nice and flies well. I loved it.

[@robertrussellmd]

Your building, trimming, and flying bring joy.

[@andrewchandler980]

A very bold prototype choice, beautifully built. Hugely impressive last flight.

[@maxfliart]

Thx, Andrew. Felt like a design that just had to be built & flown.

[@hertzair1186]

Perfect airfield…natural cushion. Very nice job on the construction and flights!

[@maxfliart]

Thx. I was hoping to get there for this trim session before they harvested the field. Looking to do the same this weekend.

[@nhschreiner]

Your are a true artist. Absolutely beautiful craftsmanship and design. Thank you for sharing.

[@P61guy61]

Excellent. Thank you for posting.

[@walk4718]

Pretty complex bird but certainly didn’t disappoint 👍👍

[@TAT660X]

Wow 😮 the flight straight over the camera was awesome

[@maxfliart]

Held my breath...any lower and it would've changed the entire day. But I'm glad I got the shot!!

[@Nigfis]

What an absolutely beautiful video. The build is a thing of beauty in itself but it simply came alive when it felt the wind. Congratulations.

[@libmananchannel]

Hello "maxfliart"! Thank you for showing us such a wonderful video! I feel so happy! I'm looking forward to your next work! Have a nice day!

[@forkdevil83]

Amazing build, wonderful flights, simply beautiful!

[@thomashiggins4923]

It's good to have you back, Tom - you haven't posted for a long time. That's an amazing plane and you have it flying beautifully. Thanks. Tom (from France).

[@calamarmou1055]

Si le visionnage était payant, ce serait remboursé par la sécurité social !!🤩

[@maxfliart]

Thx, I'm glad u enjoyed the effort from these past few months. Can't wait to fly her again.

[@Glicksman1]

Great conception, great execution. Wonderful build and finish. Masterful trimming session resulting in such great flights. I'm in awe of your skill and knowledge, and your application of it in creating this unique model airplane. This and you are what our hobby is all about.

[@maxfliart]

Thx. It was a rewarding day. I'll never forget it.

[@Glicksman1]

@@maxfliart Thank you for sharing ii with us.

[@bokusimondesu]

Absolutely beautiful build and flight. I did hold my breath for a second there, on the sixth flight, when it stalled. 😊

[@maxfliart]

Same here. But I was pleased to see her ability to recover, a few times. More stable than I ever imagined.

[@pcj3405]

Wow! Love seeing the unusual designs being brought to life. What a beautiful flier.

[@scottnix4991]

The opening shot made the hair on the back of my neck stand up and gave me full body goosebumps. Had to play it over and over with the sound cranked up. Another Masterpiece.

[@maxfliart]

Ha....thx. After I saw her safely pass the tripod cam, and I started breathing again, I couldn't wait to see what I'd captured. Couldn't have planned that better if I'd tried. A lucky shot for sure.

[@scottnix4991]

I wish I had had the patience required to trim freeflight models. In my defense, I was building Guillow's models that were apparently made of solid oak. Still in the hobby today, but I build models out of Depron now with micro RC components. It's what I dreamed of when trying to make those Lead Sleds fly. Your Artistry and your skill absolutely amazes me. Great stress reliever. Thank you so much.

[@glenncarter2126]

Incredible workmanship, very impressive

[@primogirotto6672]

I miei più sinceri complimenti per le tue realizzazioni che sono meravigliose e dimostrano le tue grandi capacità costruttive, non che la fantasia nelle forme.

[@maxfliart]

Grazie! Il modello è stato una sfida da costruire, ma ho imparato molto sulla balsa e sul volo di modelli insoliti.

[@primogirotto6672]

@@maxfliart Una sfida molto ben riuscita, essendo io un realizzatore di riproduzioni di aere per un museo, ti garantisco che i complimenti sono poca cosa nel vedere le tue creazioni. Io mi incanto quando vedo cose così ben riuscite, spero di vederne ancora. Un grande saluto.

[@patriciosilva1969]

Fabulous and inpiring, like all of your other planes. Thank you for bringing joy. I can't stop thinking in that these creatures are so fragile and strong at the same time. The structural design work and the construction workmanship itself are admirable.

[@jeffpiatt3879]

Absolutely loved the "motor" sound as it flew over the camera, in the beginning. Your channel quit showing up in my playlist and I have missed it. Searched for you today with "free flight models", just to see what you were up to. The stooge you built to hold it while winding and the foam prop blocker were genius.

[@maxfliart]

Thx, Jeff.

[@michaelgillespie1206]

Yes, that was worth the wait.

[@ZUSMANELEN]

Magnificent video!!!😊 It is so relaxing to watch!!!😏 Awesome flight!!!✈ Brilliant model!!!🤗 Talented modeller!!!🤓😉 Thx for sharing all this with us!☺

[@maxfliart]

Thx, Elen. Now u know what was taking much of my focus these past few months. :-)

[@ZUSMANELEN]

Ahah, u r right i know now!!!😁 No wonder u did not post any new vids for quite a while!!!🤔 Now I understand what u've been doing during all this time🤓...and it was all for the best as always.😎😉🤗 How much time did u spend for building her, in overall hours? She's a pure beauty and she flies sOoo smoothly...✈ Hats off to you Mister!!!😏

[@maxfliart]

@@ZUSMANELEN Hard to say the hours, but I usually was in the balsa every day for at least an hour or so thru the 3 months. Felt like the perfect balance between life matters and studio work. Love when it works out that way.

[@Vladancz]

Well done Tom! You always build something original and interesting!

[@maxfliart]

Thx. At this time in my life, I'm enjoying the challenge of an unusual ship. It's a pleasure to fly something that's rarely modeled.

[@DJAYPAZ]

A most enjoyable video. The close up stills of the flying wing are excellent as are your model making skills. Thumb up !

[@stevenprobelski8029]

Well, that is beyond beautiful Tom! I enjoy watching your videos and learn from them. You sure create some interesting construction methods. Thank you foe sharing!!

[@rc166honda]

Beautiful work, absolutely inspirational. Thankyou for building, flying and posting.

[@Colbert67]

That was a great shot going over the stooge!

[@iscluiscaduk]

Beautiful airplane, beautiful work and beautiful flight!

[@cal-native]

On that last launch I happened to notice the thermaling Vulture just as it left your hand, and watched in awe as it headed straight for it! Wait till Vance sees it!😉❤️ Hi again from San Diego👋

[@maxfliart]

Ha thx. The Thermal Gods were definitely taking notice and planted a couple of fans, as I never looked behind myself to see what was happening. VG saw these for sure, and will see the ship this weekend at the Wawa Spring contest. Can't wait to get her going again.

[@montri399]

Excellent, I'm watching from Thailand.

[@f4udhorn]

Mind-numbingly Fantastic! Only you could achieve this, Tom! Huzzah!

[@maxfliart]

Thx, Duke. It was a memorable build for sure. Only wish some of our FF heroes were still around to see it.

[@indoorglidiator3285]

Superb flights. The last one seemed to have caught a small thermal. Flights were as elegant as the real life avians we saw at the end of the video. Very inspiring. Envy the large field with soft tall grass.

[@maxfliart]

Thx. They cut that section of the field in late spring, so I was glad to be able to use it before it was gone. Except for the dirt landing, she never hit the turf.

[@Melw44]

Very pretty! Nice work, and she Flys well! 5hanks for sharing.

[@wernerschulte6245]

What a wonderful piece of art you ´ve crafted ! The counter rotating propellers is the right concept. Watching the flights is more exciting than watching radio controlled model aircrafts Even the bird seems to like it. Admiring !

[@RichardTapp1]

Magnificent! What an outstanding achievement!

[@frankzappa3538]

Love your videos, getting back into the hobby after about 20 years and your basics series has really encouraged me to try new things, thank you!!!

[@maxfliart]

Thx. Enjoy ur future builds.

[@ShutterAce]

I really enjoy all your builds and all of your videos, but this is an absolute stunner. Wow! What a beauty! I've been watching your channel for a few years now. I'm a static scale modeler who's dabbled in some flying models as a kid. So the interest has always been there but for some reason I just never pursued it. Every time I watch one of your videos I think I need to change my hobby. Thank you for your calming, soothing, and inspiring content.

[@maxfliart]

For sure, give it a shot.

[@HobiCerdas]

The Best ❤❤❤

[@michaelwhinnery164]

You have built yourself one heck of a model there, I'm looking forward to the day when she catches a big thermal on a calm evening and shows what she can do. I've just begun to add some flying wings to my rc collection and my only is regret not doing it sooner. Some tiny rc gear would fit nicely into this model.

[@davidwagner6606]

Great stuff. Wonderful video

[@johngunther6333]

The artistry, craftsmanship, tuning, tweaking, and success of these builds boggle my mind!

[@TheFlytechguy]

Masterful!

[@jaxrcexplorer]

Kudos! Amazing build and amazing flying! 👍👍👍👍👍

[@dginia]

Masterful, to my notion. Love your lighting techniques, too.

[@maxfliart]

Thx. That morning light is irresistible

[@alansiegel4081]

Congratulations! You are a superb craftsman + a tad of dreamer. Excellent all around!

[@maxfliart]

Thx. Don't wake me up.

[@bobellsworth3180]

What a marvelous job. Your attention to detail and patience in test flying is to be commended. As a lifelong lover of aircraft ( especially those that were a bit unusual in design) they have always fascinated me. The job you did on this build and presentation is great. No photos left but about 60 years ago I built a large balsa Dornier 217 J2 from scratch using old prints. At first I wanted to do a RC version but back then RC gear was spendy and it never got past the control line level. But it was impressive and with a wingspan of over 5' its' excellent detailing always drew a crowd. Your work on this old Boeing design makes me want to look for some drawings for Howard Hughes X11 that he built at the end of WWII for the army, Another twin boom twin engine monster in its time. Keep up the nice work. Old Bob

[@maxfliart]

Hi Bob. Thx for the kind words. I'm glad u were able to see this ship in action, since uv certainly had quite a bit of airtime throughout ur life. Thx for taking the time to share ur thoughts. Go for the Hughes X11...looks to be quite a good twin, no matter how u would power it up, but I'd be tempted to try rubber for sure.

[@DoyleBlevins]

sweet flying

[@sylvainponchelet4188]

amazing man !!! so nice this plane . Thanck you for this moment of emotion .

[@bernardscott9757]

A joy to watch. Congratulations!

[@maxfliart]

Thx, Bernard. I see more potential in this ship.

[@motoflyte]

That grass is perfect for safe landings

[@maxfliart]

Yes, I was glad to get there before they harvest the grass.

[@XXfea]

WOW 🎉🎉🎉. Thank you!

[@fb4392]

Another masterpiece!

[@Chris75169]

That's Really Neat ! ! ! Congratulations !

[@larryfisher7056]

Absolutely beautiful.....

[@c150gpilot]

"Cool!" doesn't begin!

[@VolareProducts]

SPECTACULAR, Tom!

[@maxfliart]

Thx, George! No cams on this one...but I wonder if she can handle another 20g at the CG?... That would be wild!!

[@RickChen]

My heart was touched, it was great!

[@xpump876]

Amazing!

[@Colin_Holloway]

Beautiful model!

[@billconrad4063]

Love your videos. A thought, label the red flags on the stooge “remove before flight”. Just for fun.

[@kenmercer8040]

I always thought you must be savant at trimming, but I now realize you must be an extremely precise builder. The result is Art. Thanks for sharing.

[@Watchingthevideos99]

Fantastic Tom. What a great project.

[@maxfliart]

Thx, John.

[@robc5296]

All you models look and fly amazing - you truly have a gift.

[@paulnelson5314]

Tom, if it impresses you, can you imagine what it does for we mere mortals, holy cow!

[@maxfliart]

Haha...thx, Paul. I was never as nervous flying a new ship as I was thru the first couple of flights. It was all so new, just trying to handle the model. Glad that the launch is a smooth operation now. Much easier than many other models with only one prop. Go figure.

[@divyajnana]

now that was a fun video, great job...and...thank you.

[@rc-fannl7364]

Another amazing creation

[@Kramskybmw]

Beautiful bird!!😍

[@patoconnor1743]

Amazing!!! Thank you!

[@rcbloke626]

What a beautiful model. The joy of flight never fades. Once again thank you sir for sharing these moments with us. You truly are an artist.

[@pauldonnelly7949]

Beautiful!

[@truenaturestormers2525]

So cool, I love the plane.

[@flightsimulator6368]

毎回，大変興味深い内容の動画をアップしていただきありがとうございます。今回も素晴らしいものでした。

[@maxfliart]

ありがとう！ 映画をお楽しみいただければ幸いです。

[@davidholmgren659]

I remember being entranced by the smaller one when it appeared on your show... And now this one is wonderful! Exquisite structural workmanship with attention to detail that is superior. The airplane flies really well... Great job and great presentation.

[@harrykeel8557]

Beautiful.

[@johnmajane3731]

Just incredible, this is where art meets engineering. An incredible model and it flies so well! Thanks for sharing.

[@pdel303]

spectacular.

[@leonardwilliams8109]

Outstanding! I have seen that plan online and an article on the Boeing flying wing concepts (including a tailless flying boat). Your model is beautiful and spectacular to watch!

[@planker]

Excellent.

[@mahler2112]

Amazing.

[@RubyS.1]

Its beautifully done

[@jonfife3637]

Bravo my friend, bravo

[@ianashton1593]

Beautiful model, looks superb in the air !

[@CliffHarveyRCPlanes]

Excellent and awe inspiring Tom, nice 👍

[@maxfliart]

Thx, Cliff. I'm still smiling.