Boiler wood 6 way splitting with auto cycle Rugged Made RS737

#firewood #heating #ruggedmade #boilerwood #6waywedge #autocycle
#explosion
Equipment used :
2015 Modified Rugged Made RS737 37 ton log splitter
2015 Chevy 2500HD
2020 Sure-Trac 7x12 dump trailer
2009 STIHL MS290 farm boss 20" bar
2021 STIHL MS500I 25" light bar and WCS bark box
John Deere Gator
2019 bad boy rebel Kawasaki 1000
Perfect Stick
miller lite shirt. www.bonfire.co...
colored outside with Scheib logo shirts. www.bonfire.co...

[@johnphillips770]

People think you split wood no big deal, have had that happen more than once, definitely gets your attention, glad no one got seriously hurt, be safe

[@trcass1]

nice video. i've just have a 27 ton single wedge craftsman. i like the lift and table on your splitter. i use my little John Deere and bucket to move mine around. works ok, but a lift and table would be nice. that exploding round got my attention. i have some maple that has some limbs taken off and it moans and groans and pops when it comes to one of those but never exploded jumped that way. Thanks for showing. glad no one was hurt. stay safe

[@paulkavanagh5393]

Sheib your the mechanic wizard you'll get it sorted great looking woodyard tell Sam no pain no gain ha ha

[@andystampfli9127]

Sam, glad you weren't hurt. Don't stand down range anymore. Don, might be time to pin down the wedges. Back to the fabrication table

[@craigwilson9560]

Wow, that thing did explode off there! Glade Sam and you are ok! Could have been a lot worse! Great splitting Action Don!

[@nebraskawoodstr]

Good to see the "handler" again. Hi Sam. Good vid boys. Cheers.

[@lendevonuk5479]

Good one Scheib!! Len (Devon 🇬🇧)

[@TheDriftlessHomestead]

Wow. That wedge and wood explosion was amazing.

[@hardworkingmanoutdoors]

That was crazy! Glad no one was hurt! Another reason I like the design of my All Wood splitter, it takes a little longer to change but no way the wedge is hopping off like that. Definitely a great clip to make a short out of!

[@On_The_Farm]

I am surprised the splitter is not held down somehow. That it nuts!

[@williamhall5087]

That’s is some great 6 way action ! Nice catch Scheib 😂😂😂

[@bobrumpf2576]

place is looking good,love the oak...

[@Stonewallx39]

Idk why this is so satisfying to watch! Nice work

[@outdoorsinthe608]

Snap crackle POP! Wow that was crazy. That six way definitely is a time saver. One push👍👍

[@daveholmes123]

Nice job fellas! Sam you can take a heck of a punch! Lol 👍

[@IronOakSawmill]

Remember Sam, Chick's dig scars, LOL Glad it was not worse.

[@johnhaug8792]

That was some good looking red oak.

[@BowMadOutdoors]

Hell of a set up!

[@OutsidewithScheib]

Thanks

[@outdoorswithlarryrobin]

Dam! That could taken some teeth out guys, Great catch and great come back from Sam!, A Double F U!😂 Take Care,🚜🪵👍🏼🇺🇸

[@scrhino40]

Whoever owns that wood spliter needs to fix it so the 6 way can't jump off like that. Someone could been seriously hurt. No job is so important that we can't do our job safely. Needs to be red tag until fix. Have a great day be safe.

[@EricPetersen2922]

Nice catch💪💪

[@TheRuralProject]

The size of those pieces are just as I like ‘em, that six way was perfect, even with the explosion. Woodyard looking good, empty, but good. Chris

[@DanielAtkinsFirewood]

At least it was his shoulder and not below the belt.

[@sawsurgeon]

Whoa there! That was downright exciting! Sorry Sam got hit, but it definitely could have been worse. Best to shoot for the jewels, the folks at Funniest Home Videos seem to thrive on that stuff🤦🏻‍♂️🤣 Bless’ns to ya, Tedd

[@robertdendooven7258]

The 6-way wedge looked like the old Rock'em Sock'em robot boxers when the head popped off.

[@kevinmason3086]

I noticed no safety glasses were worn. That could have been worse if a piece came flying up and hit one of you in the eye. Hope Sam is ok I bet he will be sore for a couple of days. I wear prescription safety glasses all the time and saved my eyes a few times.

[@froghollowfirewoodllc]

Had many explosions over the years. Be safe my friend.

[@traviscover7002]

I like your new video this was really cool video good jpp you guys did a good on this friwood good job buddy 🍺🍺

[@OutsidewithScheib]

Glad you enjoyed it

[@fricknjeep]

hi there well done . didn't dan have a problem with the head coming off also john

[@grizzlywoodservices4825]

I’ve had more than a few rounds explode like that on my Wolfe Ridge. It’s always on a knot or twisted section of trunk. Maple is notorious for it but oak crotches build energy like that also.

[@OutsidewithScheib]

this was a first for me i have had them pop but not explode like that.

[@grizzlywoodservices4825]

@@OutsidewithScheib my best guess is that part of it may be that your 4 way is free floating. At least for me it’s usually the chunks that go over the 4 way that go flying since my 4way is pinned. Just a guess though, might unpin it and see if I get the same result

[@RVBob]

Wow that was dangerous! Good thing it didn't catch Sam in the face!

[@catsgillhillbilly]

Folks don't realize all the ways a splitter can mess you up. That happened so fast there was no way to know it was coming. Glad it wasn't much worse. Have a beer! 🍺

[@lt.punchdrunkington7123]

I had some wood that kept exploding like that, so I put my full cage hockey helmet on!

[@megamike4357]

That's a good 30 minutes of work! Even with the shoulder situation it was very efficient. I personally have founs ash to be the most explosive wood whils splitting.

[@nattydreadlocks1973]

If I can lift it... ain't no need to split it. I usually split a year ahead so its fairly dry by the time I use it.

[@richgray9117]

I had that happened to me when my buddy and me were splitting and it split my forehead opened pretty good I was sore for about a week after that..

[@glenspryszak6005]

Looking at the 6 way wedge, the lower part of the X appears to be welded on incorrectly. The result is the wood passing through lifts the wedge as the attack angle is reversed...

[@leovogelgesang4398]

Damn Schieb At least turn around and pet the dog for a second. Dogs are better people than most people

[@OntarioFirewoodResource]

Close call, I thought it hit his face at first. I found a picture of you in a google search and I put it in my oak tree ID species video

[@michaelwillson6847]

I don't have the 6 way for my splitter don't even like using the 4 way but that wood looked to nice for boiler wood. 🏴󠁧󠁢󠁳󠁣󠁴󠁿👍🤘 Do u sharpen or get your knives sharpened on splitter or doing anything to them?

[@garylaszewski7380]

I heard you tried to split a new type of wood species: "dynamite wood". Suggestion: Send Chris (In The Woodyard) a whole cord of that stuff to split, it might wake up his viewers with something new. Thereafter, he'd be wearing a shirt that says: ---cut ---buck ---split/explode ---pile ---repeat

[@IronOakSawmill]

Red oak is known to pop like that. Got hit with a few pieces in the past.

[@sawsurgeon]

Hey Chuck, it gets real pretty quickly. It’s only funny when JPF takes it in the jewels😬🤣 Bless’ns to ya, Tedd

[@colleensfarmadventures4176]

Haha, you’re so bad Saw Surgeon 🤣🤣🤣

[@sawsurgeon]

@@colleensfarmadventures4176 : Oops, did I type that out loud? 🤭😉

[@bruceg5729]

It looks like Sam should be feeding more logs when it gets down to the last one instead of throwing logs. Looks like there was too much down time in between logs. That is if you want to make the best of your time.

[@iancracknell1379]

There's a shot of the pile near the end of the video. Should of moved the machine back a few feet and let the machine push the wood off the end of the table into a pile. What was the purpose of all that tearing and tossing?

[@OutsidewithScheib]

Just habit

[@debfromthemill6945]

I hope Sam is Okay.

[@colleensfarmadventures4176]

Poor Sam, he’s always getting hurt!!🤪 But seriously glad it didn’t get you guys worse!!

[@robkerwood6555]

Glad nobody got seriously hurt. Why don't you use the next round to push the previous pieces out of the wedge rather than pulling every split out of the wedge?

[@OutsidewithScheib]

Just habit I guess

[@robkerwood6555]

I can understand that. I do a lot of things out of habit that aren't necessarily the most efficient, but work for me.

[@adrianphillips6238]

Hi Scheib, that was explosive. Did that because the round/knot is really dry?

[@kennyp507]

looking good Scheib, def think Sam's yard is coming along, just a question about the 6 way, I saw on a few logs the 6 way needed to go higher on the fixed single wedge to center on the log, but instead you lowered it so the top of the 6 way was flush with the fixed single wedge, was that for stability to nothing got damaged?

[@davidedwards3734]

I dont use my 6 way much, what size rounds do it work on best?? Hope Sams ok. Stay Hydrated and Have a Safe Day

[@outdoorswiththisguy1950]

BOOM SMASH CRACK .LOOK OUT SAM, watch them fings

[@williamklein6649]

Turn up the pressure? So it totally takes Sam out?

[@DudeRanchDIY]

Curious to see what you end up adjusting it to, I’ve played with mine a bunch even with a gauge, and got it pretty good but still find that once the oil gets nice and warm it doesn’t want to kick back every time for some reason

[@OutsidewithScheib]

We shall see

[@BowMadOutdoors]

Can you carve a bear out of a giant log, have a stack freshly cut? Or know anyone that could do it? I’m looking atleast 10 to 12 foot tall, 5 foot diameter

[@johnforman4308]

Haywire design

[@OutsidewithScheib]

Yeah it’s kind of my design but it works great 99% of the time.

[@Travman22]

How many cords do you sell at your roadside stand per year

[@OutsidewithScheib]

Last year it was roughly 11 cord

[@Travman22]

That's a good amount

[@SasquatchBunyan]

Ha! Thumbs down button, twice. I got it. 🤣

[@DirtRoadLanding]

At 4:41, Schieb mistook that log for a Miller Lite can.🪵🪵🇺🇸🇺🇸🪓🪓🍻🍻🍻🍻🪵🪵🇺🇸🪓🪓🍻🪵