Bold & Beautiful: The Classic Bronco Goes Caribbean Turquoise - Music City Trucks S1, E15

[@zippythechicken]

that popcorn ceiling paint really laid down well... even in 1080p you can really see the texture in the paint.. It looks great and its also nonslip ... wow

[@xanderp5184]

Coming from a body man, Brandon didn't do half bad considering his experience level. A cut and buff would get it acceptable, and having a part in the project really does make it more personal, even if it's a flaw

[@Onethirtytwo]

Sanding with no masks; natural selection at work...

[@autodidact537]

And the clear coat makes great hair spray too! LOL

[@smaggies]

Thank you for all the hard, Hard Work, amazing vehicle that we ALL LOVE. :)

[@rockkhound943]

I love this color . My uncle has a very early production vin# I think it's #6 also the same color with white interior and soft doors and top . It's perfect shape and we occasionally drive it in homecoming lol . Really hope I get to buy it or inherit it ... good looking bronco your building. I helped my uncle nut and bolt restore his in the early 90s . Later

[@aaronburratwood.6957]

Paint & body is my jamb. 🔥

[@THROTTLEPOWER]

Great vid!!!!!!!!!

[@AndyFromm]

Sweet build

[@THROTTLEPOWER]

I agree Andy!

[@natenasty6292]

NICE WORK BRANDON! LET SO BRANDON!!! 🤣🤣🤣

[@kennethconnors5316]

always different and fun watching

[@kashifjuttofshelchana5444]

Nice broo

[@strexttp]

Very good job 👍

[@michaelrodrigues5713]

Watching these guys work makes me thirsty!

[@imranabbasi7871]

Good luck 👍

[@Crimeanland]

Молодцы !!!!!! Супер!!!!!!! Сразу захотелось свою машинку отремонтировать!

[@michaellongoria647]

What paint gun was being used? Laid down paint and clear really nice.

[@robwestonjr3332]

Sata 5500 rp i. Most likely 1.4 or 1.3 tip

[@Sonicdude10]

Vehicle exterior perfection is 95% prep and 5% spraying the final paint coats. I know having done this with my grandfather on some of his restomod projects. His 1949 Ford business coupe car was nothing but pain due to how imperfect the body was...

[@dodgeguyz]

I’m breathing heavy now just watching them sand that! Jeez, wear a mask!

[@garybeauregard5903]

where can i get one of Ryan's shirts?

[@mbord169]

So much orange peel! Someone will be sanding and polishing a bunch! ha

[@bilbobaggins4710]

Tail gate looks like pure hell...looks like one shit coat with no build

[@garykeenan3724]

Dang that was expensive paint job to bad didn’t use some lung prevention (masks?) turned out really nice 👍

[@emmettbrown2080]

Nothing as good as Detroit muscle

[@scottkailey1]

Looks like a lot of orange peel to me needs a good cut and buff.

[@dakotawheeler4133]

I was just thinking the same thing. That's got some heavy peel in places

[@phillipwilliams8805]

Yeah but the work space you have to work with for the coyote motor is like trying to work on a mini van it’s complicated cause the work space is tight. It’s like your building a smaller version of the raptor just a SUV.

[@2005StangMan]

All those extra steps and the paint still looks rough as hell when finished. Skip the extra primer steps if you're going to paint it so you need to wet sand and polish after it anyway.

[@ChessIsJustAGame]

Beach buggy... meaning sea salt air and saltwater splashes. 20 years ago, I had a westcoast 74 Bronco that spent some time at the coast in Washington. Rust was everywhere in every nook and cranny. The previous owner did his best to cover it up, but when a passenger door falls off because the bolts holding it onto the body snap and closing the tailgate sounds like glass breaking and falling inside it, you know you're in trouble. I traded to someone with deep pockets, but to restore it, it needed *every* body piece and I didn't have that kind of money. Frame and drivetrain was very good and off roading never better as long as you overlooked the body. Personally, it sad it is sad that the truck in the video will be driven anywhere there is salt. Sea salt is worse than road salt, it's a 24/7 52 weeks a year attack on every part made of steel.

[@zippythechicken]

Lets Go Brandon

[@anon58973]

Why don't they wear dust masks?

[@chrisland169]

after all that work you can see a lot of orange peel at the end!!!

[@shanedingz]

What that guy said👆 It’s not ‘the end’.

[@bilbobaggins4710]

All fuckers get orange peel even the professional painters

[@bilbobaggins4710]

@Maybe, maybe not. tail gate center looks like shit ...very poor film build and that's a tough area to cut and buff coz it's recessed ...not a quality job imo

[@richarddarlington1139]

It's about atomization. These gravity-fed HVLP guns do not atomize the paint nearly as well as the old siphon feed guns. Also, using a too fast reducer can cause early flash-off, preventing the paint from flowing. A competent painter with the right equipment and materials (screw VOC's), can really lay it down. It also makes the color sanding and buffing go a lot easier. For production work, such as collision repair, no buffing required.

[@iQ.62]

May I know the email of one of the people in this video I want to talk directly to restore my car and will send it from Indonesia. May someone help me

[@johnmirbach2338]

😎👍✌🖖👌😁

[@tedjones450]

Their lungs must be filled with so much dust now, I would think that some type of respirator should be used

[@Crimeanland]

Очень плохо что работаете без противогазов и очков!

[@yuris6125]

Да и покрасили хреново, особенно, задний борт.

[@saurabhnanoti8925]

Hy there good evening n good morning

[@aaronbuck7265]

I'm eating an orange with a smoother surface than that paint job. Wow 🤦‍♂️ All that A+ prep work then a C- Maaco spray job.. Turn down your product and spray a little slower. Base/clear isn't a race in a temperature controlled booth. That was a factory quality paint job, definitely not SEMA quality.

[@andrewmasonwerdna]

19:20 WHY?! Just why?!?! Looks like a 4year old painted a ford logo, after 4 days of sanding it.... 20:36 Enh alright...

[@amoni1959]

Guess masks and other respiratory safety equipment is in short supply at power nation. 😕

[@alexcarter6724]

Grinding without safety glasses as well

[@dlewis9760]

You want to see someone who works without a safety net? KZbinr "Bad Chad". I gave up, because I cringed every time he'd go maskless.

[@bilbobaggins4710]

Maybe it's waterborne

[@bilbobaggins4710]

Ghey color

[@Blando7887]

Personally, that color wouldn’t be my choice.

[@MachineDr.]

I was thinking the exact same thing

[@Pink_hat_guy]

more faux bronco . . . Lets Go Brandon

[@beausmith3900]

It seems weird to me that such a high quality paint job was done on this... not just because of the awful color.... but there was no custom metal work, and its not a show truck... I can see this level if you would have shaved the hinges... in my opinion this build would have been best served with a full linex paint job...

[@bmstylee]

It will be an auction car so you really need a nice paint job. Wait. People still think the rust bucket look is good. Please disregard my first thought.

[@MrBlackbutang]

Yuck

[@lawrencefoster2120]

You showed the paint job on last week's video and it was a promotion advertisement and it was ugly.

[@andyeverett7611]

That's hideous. Wish you would have picked something more realistic versus something to keep a sponsor happy.

[@ryankyser5243]

Color is so ugly.

[@bmstylee]

It's awful but still better than the rust bucket look that seems to be cool.