Bolens BL110 Assembly, Start-up and Review (BL160, 25cc)

[@brent5688]

Thank you for streaming!

[@BessieStalvey]

How to change head

[@MyLooneyBin]

I am going to do a video, but go to Lowes, and buy the new head and bump knob, it is literally a direct replacement

[@MaxRice-m7l]

This is the gas 2 cylinder trimmer I’ve been looking into for a little while to buy from Lowes, these gas trimmers have a ton of power, I have a newish HomeLite curved shaft gas model, but I kinda bought it on a whim last summer from Home Depot I’m mid June, so I’ll might replace it with a bolens or troybilt curved shaft 2 cylinder trimmer for better power and performance maybe next summer or the one after that to purchase then.

[@MyLooneyBin]

This one is still going strong, starts up every time

[@MissingPersonsMysteries]

I had the hardest time trying to start the BL110. Thanks for helping me figure it out! PS - your right its an excellent deal!

[@MyLooneyBin]

Thanks for commenting! Glad the video helped.

[@InterpretingJoy-qi5cr]

I can’t get that unscrewable cap to unscrew, help!

[@MyLooneyBin]

You will have to order. New one, then you will cut the plastic, just off of the bump cap portion and that will reveal a bolt that you can use a wrench on. That will help you get it off. You have to hold the larger cylinder steady while you unscrew. Try some large pliers before you start cutting.

[@UPRailfan]

Very cool, I have that same exact weedwacker that I got for free in a junkyard, required a new carburetor but now it runs like a charm and I like that design, it’s not hard to work on

[@MyLooneyBin]

mine still works great, starts up every season just like new

[@TheWriter-zr7or]

What kind of gas does it take ? The 2 cycle gas you buy in can or regular gas ?

[@MyLooneyBin]

I mix my own, but you can buy the 40:1 ratio at Lowe's . I recommend ethanol free or you must drain and winterize, otherwize the carburetor will gum up

[@TheWriter-zr7or]

@@MyLooneyBin Thanks ! I don't know this kind of stuff. Appreciate the feedback.

[@howardseverance6364]

bought the bl160 , its the same as the walmart weed trimmers with the bolen name on it . put it together ,used it and the next day took about 50 pulls to start..lol

[@elvis-jj1sc]

bought one today 160 straight 25cc at lowes looking at there return rack 30 bucks never had gas in it no wear etc i strung it up mixed oil gas 1 min fired up np! THEN I REALIZED NO SHAFT COVER PLASTIC PIECE ON BOTTOM? YOU HAVE A EXTRA TY FOOR YOUR VIDS!

[@MyLooneyBin]

Place called jackssmallengines website has the parts. Looks like around 20$

[@trevey16]

I used this last season, bought 2. It start then stop after maybe 2 mins. Bought a Husqvarna recently, its doin the same… im using 50:1 for both. Is that the problem? I was told u can use 50:1 for all trimmers

[@MyLooneyBin]

I am not sure about that, I use at least 40:1. I actually mix my own and only use the ethanol free gas in doing so. I literally haven't had one issue since I bought it. I start it in sequence and it starts every time. Started right up even after setting this winter.

[@woodynorris3544]

Thanks for the vid. I just bought one of these and getting used to the start up. This trimmer is powerful and cuts great!

[@MyLooneyBin]

I love mine as well, starts every time. Use good non-ethenol gas. Thanks for watching

[@woodynorris3544]

@@MyLooneyBin I agree. Only cost me $45 used when my uncle just spent $400 on a Echo weed eater lol

[@richietee23]

I just bought one last night at Lowes. Thanks for the showing

[@MyLooneyBin]

No problem, I love mine. It does like to be started once a week wether you use it or not! Lol. Definitely use non-ethanol fuel if you are mixing your own.

[@hellcatrover7453]

I got one of these for $10 and it works great just wanted to see others opinions and problems

[@MyLooneyBin]

mine is still going strong, starts every time, just follow the instructions

[@florenchong]

Better vid if the camera is not against the light, I could hardly see what is being shown. ✌️

[@lindembergl]

Thank you, helped me at lot

[@MyLooneyBin]

Awesome, thank you

[@thatotherguy9917]

i got a craftsman leaf blower with that same motor, had it around 6 months, so far it hasn’t given me any problems, other than it doesn’t like to be revel up when it’s not warm yet especially in the cold

[@MyLooneyBin]

yea, that is interesting how they take a second to get going, but I tell you, I just used it again yesterday, and this thing is a beast once it gets going

[@thatotherguy9917]

My Looney Bin agreed, mine gives me no problems when it is warm

[@jelizondo0622]

I must not be doing it right. But my bum line ain't working. Can you show us how to do that?

[@barbarat5729]

Was just outside trying to start the one the landlord left. Hopefully by the time your done I can get it to start.

[@MyLooneyBin]

I have another video that show you how to actually start it. it goes into step by step detail how to start it. kzbin.info/www/bejne/enzKfp53Z5Kqaa8

[@mkfan6167]

How is yours holding up because Iv had mine for 5 years and it doesn’t run anymore, I hate it

[@MyLooneyBin]

This will be my 3rd season, but haven't started it yet. I only use non-ethenol gas , but just double check your gas bulb and spark plug. But if you've been using regular gas, probably gonna need a new carburator. But then again you can buy 4 for the price of one Stihl brand. So basically you need a Stihl to last for 20 years to be as equitable.

[@billlooney9638]

Good for you, tools to work with after you work !

[@MyLooneyBin]

yea, well, it keeps me in shape I guess, my work these days isn't necessarily what I call work, but I guess somebody has got to sit at a desk and call it work!

[@SC-mf7ni]

Would you recommend this or the Homelite

[@MyLooneyBin]

I love this thing. Starts for me every time. Ethanol free gas. Right mixture. Best price.

[@SC-mf7ni]

@@MyLooneyBin thanks 🙏

[@KM-nq8hy]

Curved weed eaters work best for trimming on hills- when you are going to be in the higher position cutting down to the weeds/grass. If your land/cutting area is flat you’ll want straight shaft weed eater.

[@MyLooneyBin]

thanks for the tip man, like I always say, you always find the gold if you take a few moments to read the comments. Thanks

[@RanceSmith]

Someone gave me one last year. I cleaned the carb and got it running good but restringing is difficult because the cap center head won't lock to be able to screw it off. When you take the shaft apart, the piece connected to the engine is male and the trimmer head is female. This is the opposite of most craftsman trimmer head shafts I have laying around. I have been looking for new trimmer head shaft but I may just resort to an aftermarket trimmer head to attach to the end. Any other ideas or let me know if you have the same problem?

[@MyLooneyBin]

did you figure out how to get the shaft not to move?

[@007wetz]

you could do a video on timer line replacement

[@MyLooneyBin]

Thank you. Will do!

[@MyLooneyBin]

I just wanted to thank you for posting this comment ... I am guilty of not commenting on videos sometimes, but this comment led to me making a video that not only is performing well, but also is helping people, and you know what , i had fun making it. so it hit all 3 of the things I like in a video , help people, have a little fun, and well make a couple bucks while doing it! Thanks again!

[@vgonzalesm]

Had one for a while now but unsure what 2 cycle oil to use , any suggestions?

[@MyLooneyBin]

sorry for the delay, but it is 40-1 you can buy premixed cans at Lowes, or you can just buy the 2 cycle oil and mix it yourself. they also sell mixing bottles that help to make sure you get the ratios right thanks

[@vgonzalesm]

@@MyLooneyBin awesomeness...it’s good to have pre mixed for backup in case I mess up lol thanks for the reply

[@trevey16]

Will using 50:1 mess this trimmer up? I had a couple problems

[@AllFunniesandGames]

Good stuff! Especially with those replacement part links.

[@MyLooneyBin]

Thanks! 👍

[@danielrenteria3377]

Is it worth it brotha woul u suggest me buying it some one is selling me one for $50

[@MyLooneyBin]

They are $80 brand new at lowes, if you are military, you get $8 off, so thats $72 ... with that said, I love mine. not sure "how used" it is, but maybe $40, but I'm a cheap skate! either way, we can figure out any issue with it, so sub and if you ever have an issue, ask and we will make a video about fixing it!!

[@danielrenteria3377]

@@MyLooneyBin thanks merry Christmas to u and your family

[@MyLooneyBin]

@@danielrenteria3377 same to you Brother, Merry Christmas!

[@jeffXedge]

Imagine skipping the assembly

[@Squiggllyduke]

Really nice “assembly” thanks for the help. Just joking that was literally no help

[@MyLooneyBin]

sorry it didn't address your need, but if you have a specific question, I can definitely try to help you out,

[@kiddfamilyfarmllc9962]

I have trouble trimming with the curved head weed eaters

[@MyLooneyBin]

yea, I guess I don't like these curved ones a ton either, it is hard to get a great position. I just use it one handed and pass it back and forth, thankfully this one is light enough to do that with

[@kobelcofan]

So how is it holding up after 2 months

[@MyLooneyBin]

Killing it still. I think I am gonna put out another video addressing common issues

[@kobelcofan]

@@MyLooneyBin I just bought one over the weekend I put good gas in it and I am really hoping I get lots of good use out of it. I take good care of all my 2 cycle stuff especially keeping it from sitting and maintaining it regularly.

[@killarich5648]

MiJaK123 Hi, is it a 40:1 oil to gas ratio, or is it a 50:1 oil to gas ratio thanks in advance

[@kobelcofan]

@@killarich5648 40:1

[@kirkb2286]

Very hard to start The instructions say to pump the bulb Then pull 5 times on number 3 Then pull 5 times on number 2 Then pull 5 times on number 1 Ok are you kidding me ...pull 15 times to get it started POS.....can you imagine cranking your car 15 times in the morning. SMH

[@MyLooneyBin]

yea, it is kinda crazy, but it actually works ... I don't always follow mine, mine starts pretty easy, but i use it pretty often.

[@tyfighter29]

total POS. wouldn't start, returned it, next one also wouldn't start. never buy a bolens product.

[@MyLooneyBin]

dang, mine starts great, really crazy how some people, you definitely aren't the only one, have issues starting these things ... mine is only 2 years old, but so far so good, and I only use ethanol free gas??