i would like to say that you guys are really fortunate to have patrick on crew. this man’s personality adds a lot to your videos. -and hey patrick, the haircut looks really good. the chicks are going to dig it.
@craiggibsonphoto2 жыл бұрын
hilarious, Bevis/Buthead laugh every time he talked about big nuts/bolts
@pboyd42782 жыл бұрын
"Leave your comments" haha - great team and Patrick is great comic relief.
@marcryvon2 жыл бұрын
I did'nt recognize him !! 🤣
@Wild_Bill572 жыл бұрын
I think someone is getting paid by Patrick’s mom, not saying’, just saying.
@mikebockey41252 жыл бұрын
@@Wild_Bill57, partick’s dear, sweet mom? -never heard of her.
@robertarnold26732 жыл бұрын
You and your crew are the highlight of each weekend for me. June the 8th I'll be 91 years old and plan on staying around to see that completion of Tally-Ho. Then I'll be ready for You Tube sail!, Thanks Much!
@vette81212 жыл бұрын
Good for you Robert, I'm right with you....tm
@joshuakuehn2 жыл бұрын
I wish you both continued good health! Perhaps you will get to see the launch of this grand affair in person!
@mikebransden4522 жыл бұрын
Great stuff, go man go.
@robertarnold26732 жыл бұрын
@@joshuakuehn I plan on seeing the launch!
@banmadabon2 жыл бұрын
@@robertarnold2673 The "perhaps" was a bit on the jinx/rude side...🙂 See you at the launch!
@BrianEltherington2 жыл бұрын
Always so satisfying to see the bit pop out dead-on target. The craftsmanship is awe inspiring. Everything done in this build has produced beautiful art along with the videography and editing that brings it. Would have never had such a deep appreciation for sailing vessels had not been for this channel. Thank you!
@waynejorgensen44332 жыл бұрын
I wish I could centre a bit so accurately.
@homer58022 жыл бұрын
@@waynejorgensen4433 I know what you mean. If I was doing it, the bit would come out the side of the keel.
@manfredvonrichthofen47382 жыл бұрын
yes awe inspiring at the very least.
@TermiteUSA2 жыл бұрын
I can tell you that most wooden boats generate the same live for their build and character and abilities. Whether they are as meticulous and near perfect as Tally Ho is, or if they are beat up and faulty as working sail ever was, they have their own souls. The life that Leo gives TH has bits of other boats on the same way. All that experience in a guy that is younger than Yota is what amazes me.
@eddygonzalez60182 жыл бұрын
@@waynejorgensen4433 me getting help cleaning the bottom of the boat. Sir, I noticed you got some bolts coming out the port side of your keel? Ah yes, interesting story 🤔.
@twotone30702 жыл бұрын
In just 3 days and out of 399,000 subs there have been 357,000 views, that must be some sort of record, surely? That's an incredible sense of belonging by a lot of people.
@MurfittTim2 жыл бұрын
What can you say when every episode is epic and a masterpiece. There is so much happening and you never get bored with watching as the editing is so good. You would never ever use fast forward on one of these videos.
@loloaqici82qb4ipp2 жыл бұрын
I use slow forward, that is 0.75 normal speed to make the videos last longer!
@SampsonBoatCo2 жыл бұрын
Thank you!
@johnmarshall2262 жыл бұрын
But isn't it great how he lingers on some shots so you can hit pause and take in the picture. Like on this video with the Pacific Swift shots. Amazing detail in there. And a clue to the work left to do on Tally Ho.
@MattGreenland12 жыл бұрын
That didn't even occur to me. I watch a lot of KZbin but these videos are special. I look forward to them being released and then sit down and make time to watch them properly.
@kamencic2 жыл бұрын
I actually fast-backwarded few times to see some scenes again.
@cerealspiller2 жыл бұрын
Beyond therapeutic.
@christinechambers86082 жыл бұрын
Leo, you ought to relate a list of some of the projects that still have to be done before Tally Ho goes in the water (and after). I think viewers think she is almost ready to launch and there is so much more to do. I'd like to see such a list. This is such a massive project and I'm loving every video.
@SampsonBoatCo2 жыл бұрын
Yes, I do have such a list... and there is a huge number of tasks on it! I might make a video about that soon...
@diverdave40562 жыл бұрын
all it needs is a few oars , so that the crew can paddle the Tally Ho around the World as Leo cracks the ole whip and feeds them a bowl of gruel !
@S_R_L_M2 жыл бұрын
@@diverdave4056 The dream
@mortjoer2 жыл бұрын
Really good suggestion, I think that would be very interesting!
@jzakary12 жыл бұрын
I always thought they still have years left to go. This is the point where things can get really expensive, possible delaying Tally Ho's completion even further. This is not the end. Just the end of the beginning. 😉
@walterp3802 жыл бұрын
This may turn out to be the best educational video of traditional boat building ever created!
@rickf56152 жыл бұрын
Fantastic synchronized hammering. You don't see that very often anymore. Those two guys work very well together. It is coming together very nicely.
@helmuthkopp97942 жыл бұрын
Doing their job with smiling faces - what a satisfaction just to watch!
@ryandavis75932 жыл бұрын
As well as the faith and trust in each other. Bravo.
@Trebuchet482 жыл бұрын
And musical, at that!
@DrDaveSalisburyPhDMBA2 жыл бұрын
New Olympic Game?
@curbmassa2 жыл бұрын
A house framing crew I worked with used to drive the boss crazy when 3 of us would go to town on one nail when nailing down the plywood decking. He'd yell at us and then turn around and chuckle to himself.
@forceablepizza7642 жыл бұрын
EP100 randomly got recommended to me by youtube, i then proceeded to watch the entire playlist, which is apparently a little over 4 years, in about 1 and a half weeks. now im all caught up and dont know what to watch anymore.
@bigbadthesailor51732 жыл бұрын
The music on this is a joy. As is all the creative use of footage As is seeing people working happily together Thanks for continuing to to remind us all that we humans are capabable of so much creativity and good. Hurrah!
@christopherdahle99852 жыл бұрын
No kidding, I'm wishing for "Tally Ho, The soundtrack album".
@nisseneichorn90562 жыл бұрын
I was actually wondering the song at 7:00 is a as far as I know a Jewish chasidic wedding song I'm really curious as to who picked that up
@natefein2 жыл бұрын
@@nisseneichorn9056 "Od Yishama". I thought there was some really nice poetry there in drilling the holes to make everything permanently attached together.
@MrTallpoppy582 жыл бұрын
Ship of Theseus / Project Recap! (EP58) 291,822 views20 Oct 2019 The answer is of course .... without question ... yes and no. You have replaced so much, there is almost nothing left of the original, so of course it's not the same boat. BUT by doing it the way you did, it's like you kept the spirit of Tally Ho alive all through the rebuilding process and she will still be there in the finished vessel. It's a question that is asked and answered but should never been asked in the first instance. Yes, you're crazy but well done. We need more crazy people like you.
@peterrichardssr10692 жыл бұрын
Leo, I haven’t heard you talk about installing a stainless steel pan or catch basin under the engine and transmission. Now is a good time to save you bilge cleanup headaches in the future when (not if) you have nasty fluid spills or leakage. Thanks for including us in this great project.
@CristiNeagu2 жыл бұрын
Pretty good idea.
@WallFlower942 жыл бұрын
This
@SampsonBoatCo2 жыл бұрын
Thanks - it's part of the plan :)
@meganluke4442 жыл бұрын
@@SampsonBoatCo You will be glad you did. Engine front and rear seals will eventually begin to seep oil and leave a nasty mess.
@peterrichardssr10692 жыл бұрын
@@SampsonBoatCo Mine have saved me on numerous occasions so I’m very happy to hear this!
@davidr.walters371 Жыл бұрын
Who else is going to do this by my count seeing these videos I've missed , I was watching a coupe yrs ago was in early watching he's certainly brought this incredible ol gal back to well almost life he's a committed crazy Englishman and GOD BLESS LEO and HIS BUILDERS , I mean were talking as of 23 he's in this 7 yrs of his life , that takes extreme commitment on his part and tge guys and gals that are helping a long thecwzry my GOD what a great group of people he has helping him , his wit , his humility and kind demeanor is why so many like helping him . It shows talents and skills of gold and is about the most enjoyable educational videos I've ever seen I mean it's addicting , GOD SPEED LADS.
@JRD77VET2 жыл бұрын
As a machinist myself, very nice work on the drilling and counter boring. Well done. Jeff
@SampsonBoatCo2 жыл бұрын
Thanks!
@SHUTTHEFRIDGEDOOR2 жыл бұрын
Hello fellow machinist 👋. I'm often impressed with the work he does.
@zedhead28642 жыл бұрын
Agreed. Well navigated. All bolts shown seem to have hit the center line of the ballast. ???
@JRD77VET2 жыл бұрын
@@SHUTTHEFRIDGEDOOR I do my "magic" in metal, Leo and crew just amaze me in their wood working craftsmanship.
@SHUTTHEFRIDGEDOOR2 жыл бұрын
@@JRD77VET I agree. Wood is very different than metal and I wish I had half his skill. And the skill of the guy hammering the bolts in while his buddy holds the rod. One slip and it would break the guys hand and arm.
@Xondar112233442 жыл бұрын
14:30: HOLY SHIT! It's the Pacific Swift! I went sailing on her for two weeks in high school and it was one of the best times of my life! She was painted blue at the time, but the green looks lovely. What a beautiful ship, what a trip seeing her in the video!
@JKheller192 жыл бұрын
Hey me too!
@JKheller192 жыл бұрын
I went on both also 2 different years
@Xondar112233442 жыл бұрын
@@JKheller19 Lucky! I never had a chance to sail Pacific Grace!
@johnshaw83272 жыл бұрын
I bought an ex Salts brigantine Spirit of Chemainus in 1994. It had fallen into hard times and only about 9 years old. We replaced the Perkins with a 5LW Gardner which is still in it. Had to cut some ballast out to make it fit, made it by 1/4 of an inch. It had 11ft6 draft. She's in Europe these days. At least she was saved.
@Xondar112233442 жыл бұрын
@@johnshaw8327 The only thing I ever bought from SALTS was jogging pants with SALTS on the seat.
@someguy892 жыл бұрын
Wow the Pacific Grace! I spent a week on her about 15 years ago with Tony as the captain! He had big red bushy beard at the time. So nice to see!
@FlyingConey2 жыл бұрын
Do you know if she was originally built with two engines?
@someguy892 жыл бұрын
@@FlyingConey Sounds familiar, I think I recall that the Grace had a lot more engine power than the Swift, and that could be because it had 2 engines. It was a long time ago though, I wasn't thinking about those sorts of things at the time. Spent most of that week on deck or up on the masts.
@FlyingConey2 жыл бұрын
@@someguy89 Thank you and as a sailor I do understand why you spend most time sailing. As someone who is thinking if I replace my DAF 1060 with to smaller engines for better maneuverability I hoped a little bit that you are an engine nerd.
@someguy892 жыл бұрын
@@FlyingConey thinking about it a little more, if I remember right, the Grace was designed and built to correct some of the disadvantages that the older Swift had. Although 2 engines might help with maneuverability, I think the main reason was for redundancy and safety when off shore.
@FlyingConey2 жыл бұрын
@@someguy89 Safety? It's a sailing vessel so it should be possible to sail if the engine stops working. My thought is that for an ordinary guy it's much easier to work on normal boating equipment. I'm a bit scared of the sheer size of the parts, the tools and the forces involved. My stuffing box has the diameter of a huge pizza, my gearbox wouldn't fit into Tally Ho's whole engine room. I'm getting used to it but I would just prefer two car engines instead of one the size of a car.
@tinkmarshino2 жыл бұрын
Oh how I miss those days when i was young... you can "rough" it with ease in a little slot next to the engine that is the master bed room.. Because sleep is not the issue here, adventure is.. At 70 my idea of "roughing" it is having to do my lawn with out my riding lawn mower.. or having to walk down to the mail box.. because everything hurts if used more than a minute.. But that is the price I am willing to pay for the fun and adventures if my life.. (though no one ever told me I would live this loong! ;-) Truly enjoy the show and the music you pick.. Makes me FEEL young again.. Relish these days Leo.. they will never come again...
@bobb8192 жыл бұрын
That one dollar boat has come a long way. Thanks for sharing this remarkable journey.
@petergoose81642 жыл бұрын
It's Sunday morning. I could have watched another hour.
@oleanderson36932 жыл бұрын
I am subscribed to way too many KZbin channels. This one is far and above my favorite.
@srperk6163 Жыл бұрын
Skilll, craftsmanship and comedy, you guys need raise.
@businessof42 жыл бұрын
Leo, thanks to your inspirational videos, I am now restoring a Friendship schooner that my grandfather and father built in the late 70's.
@glendree12 жыл бұрын
The accuracy to which Patrick & Zeel drilled the keelbolt holes by hand to land spot on the centerline was superb! Seriously hard work to get the bolts seated and tightened up. Well deserved whiskey guys!! Inch by inch step by step Tally Ho getting closer to water. I really enjoyed this episode. Thanks Leo.
@alexmason10222 жыл бұрын
How on Earth did they do it? I mean, how did they manage to drill such a long distance by hand and still come out below on the centre line?!
@LunarEclipsism1 Жыл бұрын
@alexmason1022 I'm six months late to this but if you look closely you can see a v-notched piece of wood they have clamped in place as a drill bit guide (The clearest look at it is around 9:16). The boys lined up the auger bit on the hole location, used a level to find a position of the drill that's plumb, and then clamped the bit guide in place to maintain it. Of course, this only works if the boat itself has been properly leveled first and if they accurately position the bit and guide to start with. So it's still an incredible feat but much much easier than drilling completely "by hand."
@johnnelson87742 жыл бұрын
Leo, It was nice to meet you Pat and Rowen in the yard the other day. As hard as you guys work I hesitated to take even a minute of your time, but it made my day! After telling my wife for months to watch the channel, she finally did....and of course she is hooked. I am rewatching them with her. thanks for spreading the joy and another great video!
@RegWhiteJnr2 жыл бұрын
do you live in the Isle of Wight?
@Neilukuk2 жыл бұрын
@@RegWhiteJnr Is that where the boat is? I went on a 2 week boating trip around that area and visited Isle of Wight.
@VitalityMassage2 жыл бұрын
This was one of the funnest and coolest episodes!
@captaintoyota31712 жыл бұрын
This channel is the best media u can watch ANYWHERE.
@alexandermenzies99542 жыл бұрын
Patrick was in excellent form.
@thomasbecker96762 жыл бұрын
Nice to see a proper engine and drivetrain being fitted and not an old one from a bus or something.
@DukeOfTwist2 жыл бұрын
If you Seek 'Er you may find such a vessel thats talk'n converters currently. he he
@bradley35492 жыл бұрын
😆
@bradley35492 жыл бұрын
Both approaches are interesting in their own way, that's for sure.
@DukeOfTwist2 жыл бұрын
@@bradley3549 Tourqing Verters
@thomasbecker96762 жыл бұрын
@@DukeOfTwist Lol.
@katrinebohr31192 жыл бұрын
Brill stuff! Who is it keeping up the helium voice about workshop fashion and their haircut? "It's no big deal, but..!" Shout out to ya, matey
@johnmarshall2262 жыл бұрын
I just have to say the editing of the chips from drilling was brilliant. You take so much care to create these videos. Just as much as you are taking to restore Tally Ho. Really impressive!
@irongoatrocky23432 жыл бұрын
Leo and crew, it has paid off doing a single Ballast Keel from scratch.......your hard work has made for a better restoration/rebuild of this SV, and should give her life for another 100 years..... Somewhere I think Leo Strange is smiling upon you all!
@hermanosamuel87442 жыл бұрын
All that tar stuff oozing from the keel shows how much more force those bolts provide compared to the weight of the whole vessel already - makes sense but still pretty impressive.
@dougkirby47092 жыл бұрын
Hi Leo, a thrust bearing separate from the engine/gearbox is a great idea as it is so much easier to maintain and replace when necessary and the universal joint drive shaft is very good too as it eliminates the need for precise alignment, I didn't see it in the video but in case you aren't aware usually the universal joint needs to be misaligned to ensure that the needle roller bearings in the joint rotate, if the shafts that are being connected are too closely aligned this won't happen and the joints will fail, the driveshaft manufacturer will usually state the range of required shaft angle for given shaft lengths to achieve the required outcome. All the best to you and the team on this tremendous project, regards Doug.
@Gottenhimfella2 жыл бұрын
I think this application uses CVJs rather than Hookes joint(s) but I could be wrong. It's still worth having an angular deflection, to prevent "Brinelling", but Leo knows all about that (as confirmed by his reply to another comment on this page)
@michaelschulz27862 жыл бұрын
waiting since 14 days----- best to do on saturday late afternoon
@zakyzigzag2 жыл бұрын
It's almost midnight here hahaha
@waihian59262 жыл бұрын
4am here
@marekvollach78312 жыл бұрын
BEST BACKGROUND MUSIC…. every single episode. Ty
@pablomax93762 жыл бұрын
Wow.. Almost 400k subs. I remember when I first subbed and you only had a few thousand. You deserve your success and no doubt inspire others to reach out for their dreams.
@gerryjamesedwards12272 жыл бұрын
I liked the hole-cutting Polka!
@eleanorchapple87722 жыл бұрын
What a nerve wracking dangerous job that bolting was. It shows such trust care and confidence in each other. Masterful!
@chloekaftan2 жыл бұрын
its not so scary, if the whole boat falls while hes reaming the holes from below his whole arm will instantly go splat, he wont even feel it because it'll be so fast. (im sorry for the really bad satire, making jokes about a really bad, dangerous, or life threatening situation is common whether at a dockyard or in a warzone)
@billparrish43852 жыл бұрын
I was just thinking that! I don't know how many times I've missed hitting the head of some fastener and smashed my own other hand holding it steady. With a 2-man operation like this, you could permanently maim the other guy's hand!
@MichaelAlm2 жыл бұрын
Love the sound of those bolts going in!! Also that engine is really pretty in there. Well done fellas!!
@willvenable42742 жыл бұрын
No way? THE Michael Alm! I better see you do a video with Leo when they start the interior woodwork! Tally Ho needs some patterned plywood!
@Arterexius2 жыл бұрын
@@willvenable4274 Depends whether Leo and his team are going for a restoration that brings Tally Ho as close to her original look as possible, or whether they go for a modernization. If it's the former, then no patterned plywood, but if it's the latter, then yes. A major part of designing anything for a restoration project, is to respect the original design and while I love Michaels patterned plywood, I don't think it belongs in Tally Ho. Sometimes its best to stick to the original design, rather than dumping modern design trends on everything.
@willvenable42742 жыл бұрын
@@Arterexius I agree it’s important to keep things original in a restoration build. Yet I still believe some patterned plywood could be included subtlety in a light fixture or light switch cover or something and not change the overall aesthetic of the original seeming Tally Ho interior. In all honesty I just would love to see Michale do a video with Leo and I know patterned ply is his jam!
@Arterexius2 жыл бұрын
@@willvenable4274 I disagree. If the goal is as close as possible, then integrating a modern design trend is taking the restoration in an entirely different direction. Even if its something as small as a light fixture or light switch. Often times it is especially when its something like that, as it is the tiny details that bring a piece together. It would make the Tally Ho look more like a New Classical with Bespoke elements experiment, than a restoration of what was popular at the time, which in the US was Art Nouveau and in Europe was closer to Georgian and Edwardian, albeit the latter ended around 1910. This was of course primarily homes, with ships being a whole other - and much older - look. I too would love to see Michael there, but he can easily do so much more than patterned ply. He's a cabinet maker by profession, which is the same profession I am a part of, and there's so much more to being a cabinet maker, than making cool patterns with veneer or plywood. Often times on these old designs, the "great look" comes by adding brass details to different types of wood. Walnut and brass goes great together, so does oak, teak, mahogany, padouk, maple, etc. with brass or copper. My father is restoring a house that's a mere 2 years younger than Tally Ho and I sure hope he won't install any patterned plywood there. It just breaks the entire flow of the design. But we probably have each our own preferences, so no offense intended. I just don't think patterned plywood would be good on Tally Ho. It's quite the eye catcher and it could easily steal the attention away from the otherwise gorgeous Tally Ho
@willvenable42742 жыл бұрын
@@Arterexius yep, just got to agree to disagree
@jordanellingson9172 жыл бұрын
Went on a SALTS trip when I was in highschool and loved it! I was surprised to instantly recognize pacific swift. Big part of the reason I’ve been enjoying the series so much.
@JKheller192 жыл бұрын
I thought I recognized it before they mentioned it! I sailed on both
@joepiano82382 жыл бұрын
Don't fret boys, it'll only be 2 more years! Lol ! Tally Ho is pointing her bow towards the sea stating: Ok Mother Nature, I'm coming for round 2 and I'm more ready than ever ! Great job mates! She's looking proud !
@belledetector2 жыл бұрын
Leo, I have watched your project from the very beginning, and it´s never boring. Probably the best show on KZbin!
@claytonbeebe30452 жыл бұрын
I’m SO GLAD Pacific Grace & Pacific Swift made an appearance on this channel!! I had the privilege of spending five days on each of them on two separate school trips as a chaperone. Tony and his crew were top notch and I even qualified to be a SALTS Jr. Sailor along with my students! LOL! I can honestly say that it was those experiences that led me to be a supporter of Leo and this project; what a nice treat to see those worlds collide if only for a minute ❤️⛵️
@edcew82362 жыл бұрын
I'm always impressed that folks can drill holes as straight as you do!
@Mookd0g12 жыл бұрын
We are supporting you but you are feeding and inspiring us. It's an even trade; a WIN-WIN.
@johnpayne24652 жыл бұрын
I love the day the motor goes in. Even if it's just a test fit, it feels so good!
@tonyrmathis2 жыл бұрын
No kidding. The days of work to get it ready to install never leave you with any feeling of accomplishment but the few minutes actually putting it in feels like a major victory. Especially if there's no problems and it drops right in.
@adrianhanson95849 ай бұрын
Keel bolts tightened the scarf in the keel timber too by the look of it 👍👍
@titusdrissen89532 жыл бұрын
definitely the best youtube series going on right now.
@shawnlewis96072 жыл бұрын
I love wooden sailing vessels because of my father who was in the US Navy. I grew up on his sea stories. He died in 2018. One of the reasons I watch your channel is because it reminds me of him. He would have loved so much watching you restore this boat. I'm so glad you stuck with this project long enough to see it turn into what it has become. I'm very happy for you and very happy I get to watch it all. Thanks so much.
@edimist12 жыл бұрын
So satisfying that the drill bit came through square in the middle in all holes! Good work!
@hibuddy147311 ай бұрын
I did notice the haircut, it looks great 👍
@johnshipp30502 жыл бұрын
That tar squeezing out of the joint so uniformly is such a good and happy site...My name is J Shipp Ive been as a hobbie a off shore power boater...However I am a cabinate maker, a sculpture, caster of large bronze peices, a fine gold and platinum smith, an international award winning fabrictor... 48 years, Ive crafted with my two hands, its certianly a pleasure to see so much of what I understand being acomplished here, such a great pleasure....I didnt realize youve been doing these videos, thats just great...Now Ive much to catch up on...Keep up the great work
@dphotos0072 жыл бұрын
Best KZbin channel dealing with boating.
@alpardal2 жыл бұрын
It's always nice how musical Leo's edits are - the whole drill sequence at around 12:10 was specially nice 😀
@danielpullum19072 жыл бұрын
The level of craftsmanship is fabulous. I'm 80 years old and remember a few folk back-in-the-day that worked at that level of skill. It is good to see there are still a few around. I'm sure their spirits will live with Tally-Ho until she goes to meet "Davy Jone"~!!!!~~!!!!
@JayAbel2 жыл бұрын
Hands down, Pancho's feather cape is the best outfit.
@stevewright2012 жыл бұрын
would be great Leo if one day soon you could put the entire series on dvd would be great viewing
@stevenjohns13222 жыл бұрын
Knocking the bolts through the keel reminds me of the old saying, “ when I nod my head you hit it “😂great work you guys every episode is amazing 👍
@jtechboy2 жыл бұрын
Wow... award for number of uses of the word GIGANITIC... Fun...
@pma76752 жыл бұрын
We've been missing Poncho lately. Maybe she would like another visit as well.
@tonygrimes132 жыл бұрын
PANCHO.
@51777jonathan2 жыл бұрын
Well done reaching 400,000 subscribers! Amazing! Jonathan Goodall
@BobbyT5952 жыл бұрын
Leo, "Those who can, do. Those who can't, watch your videos." Excellent attention to detail at every level. If I may use a term from your homeland "BRILLIANT!!!"
@davidvivian5962 жыл бұрын
Hi Leo, I've been travelling around the UK in my van for the past 6 weeks and was unable to log on to your site during that time. I didn't miss home comforts at all, but I did miss seeing your progress with Tally Ho. I've just watched EP123 and will catch up with the subsequent episodes over the next few days. I already feel back home now and can see that Tally Ho is going to be a huge success story. Congratulations to you and your team.
@itsfonk2 жыл бұрын
Continually awed by the level of perfection and passion of each craftsman throughout every stage of this project. The materials, fit and finish are all top notch. Love every bit. Thanks, Leo and Co. 🤙 PS. Patty’s trim did not go missed. 😉Lookin’ sharp, bucko!
@bulletproofpepper22 жыл бұрын
You have to play the song “Tennessee Whiskey” by Chris Stapleton (country/blues) when you’re drinking Tennessee Whiskey. Great job, thanks for sharing!!!
@replica83132 жыл бұрын
kinda dreading the ending of this fantastic journey you have all been on ...
@alexhamon92612 жыл бұрын
Continues with more sailing content.
@lazyman75052 жыл бұрын
@@alexhamon9261 Won't be the same :(
@SampsonBoatCo2 жыл бұрын
@@lazyman7505 boats are never finished, there will always be work to do!
@equitime772 жыл бұрын
@@SampsonBoatCo Especially wooden boats!
@Gottenhimfella2 жыл бұрын
@@equitime77 Indeed. Like the Firth of Forth bridge ...
@DavidABurns2 жыл бұрын
Leo, it is obvious that you are a skilled and talented boatbuilder/shipwright. Still I am constantly amazed at the talent and skills members of your crew possess. You have an amazing group of volunteers and paid staff. Their dedication to their work, Tally Ho and to you shows what a great group they are and what a fine individual you must be. KUDOS to all.
@jamiegibson1010 Жыл бұрын
Well said. Ditto.
@groundspeed39542 жыл бұрын
How do I admire Tally Ho's resurrection? Let me count the ways: honest, true, and hardworking leadership; a crew from many walks working together to re-create a thing of beauthy; NO sacrifice of quality workmanship for expediency; and I could go on and on. All good things come to an end. But let us linger and enjoy Tally Ho's re-emergence while it lasts. And may Leo lead us on more testing and uplifting adventures.
@johnbabcock50012 жыл бұрын
I really liked the jazz music (during the keel bolt installation)!
@465maltbie2 жыл бұрын
Too keep those holes straight is quite a job, thanks for sharing. Charles
@rickleblanc50512 жыл бұрын
Kudos to the guys hammering in the long keel rods - it show what it means to trust a co-worker. One guy holding the driver rod and the other guy hammering it. One slip and you could break a hand/wrist - but they trust one another
@nrgspike2 жыл бұрын
Wow, it certainly gives you a sense of the clamping force being exerted by those bolts if the weight of Tally Ho on her own wasn't already sufficient to squeeze that tar out!
@FistralG2 жыл бұрын
So much pleasure gained from watching a video of two guys hammering their shaft into a tight hole.
@Xondar112233442 жыл бұрын
2:43: I loved Pete's "come to daddy" gestures when he was guiding the engine!
@shaunolinger964 Жыл бұрын
@19:15 Damn but that double-jack hammering reminds me of hard-rock mining in Northern California in my late teens and early 20s. I worked with an old 3rd generation gold miner who inherited it from his father and grandfather. We did our drilling just like this... a three man crew with the holder switching out every 25 strikes. Carbide helmet lamps... the electric flashlights were just to get us out when the carbides burned out. I love absolutely everything about your crew!!!
@richball95762 жыл бұрын
Must be great to work with such a great group of friends. You also have the added benefit of comic relief from Patrick 😜
@dbmail5452 жыл бұрын
Casting and attaching the ballast keel was much more involved than I imagined. That was a BIG hump to get over. "Whiskey bolt" indeed! Those boys earned their tipple.
@danoneill87512 жыл бұрын
The guy who mentioned his haircut seems like an excellent guy. Seems so jolly - I like his bits, have him on more!
@wrennobrien20772 жыл бұрын
Leo!, astonishing craftsmanship, you have a talent for gathering the perfect crew around you. Can't wait to see the line up and laundry billowing.
@gabelbart2 жыл бұрын
WOW! What a beautiful vessel the Pacific Swift is! I love that you show the Boatyard from time to time!
@markthomas37482 жыл бұрын
Fun to go back in time to hear you say 108 year old sailing boat. It’s been a life’s mission bro!!
@johannes.f.r.2 жыл бұрын
Everyone's continued enthusiasm on this project is such a testament to your management skills, Leo. Amazing that it doesn't really slow or even bog down. Everyone has a task to do and it is clear what that is and the pace is apparently very good. You make good progress and continue to do so.
@davidelliott83242 жыл бұрын
I'm really proud of Patrick the Potter for his work this episode, he rode that lever and swung that maul with precision! This was a great episode, thanks everybody. You guys have become such an efficient team.
@rick914432 жыл бұрын
Lucky I'm sitting here doing ABSOLUTELY NOTHING (well, sort of looking for your video) cheers..rr Normandy, France
@TheThriftyWoodworker2 жыл бұрын
The musical selections are spot on.
@chascain12 жыл бұрын
I've been fretting about that ballast keel since he stood up the full keel years ago....looks GRAND!
@Grounded42 жыл бұрын
Love your taste in music background
@JohnSmith-yv6eq2 жыл бұрын
Leo was going to be a professional musician...so has the background to choose exceptional and fitting music
@stevejones97882 жыл бұрын
Very satisfying hearing those keel bolts being driven in . Here in Europe to meet regulations it is mandatory to have a separate bilge under the engine with it's own manually operated pump out arrangement and bilge alarm to prevent oil pollution. Are you installing that sort of arrangement? Don't forget that there should be a little misalignment between the engine and prop shaft so that the cv joints in the ' Python drive" don't seize up !
@SampsonBoatCo2 жыл бұрын
That is only mandatory on larger vessels, but a good idea on all boats of course. The limited space makes that a little awkward in small sailing vessels like this so it's uncommon to see. We will probably just have a drip pan under the engine. And yes - quite right about the misalignment! The unit we are using is actually an Aquadrive.
@roadie31242 жыл бұрын
@@SampsonBoatCo Drip pans are very useful. 40 or so years ago my Triumph Dolomite Sprint developed a slight oil leak. I wad advised by a master mechanic that the best remedy was to buy a drip pan. Sound advice.
@CaptainRon19132 жыл бұрын
Stanchion installation, Engine installation, Keel bolt installation, and Man Bun removal. Great job guys!
@jarekhanel15522 жыл бұрын
“Hi, my name is Leo”… Oh, how I love these beginnings! I've been looking forward to hearing it in a new episode for two weeks! And again I'm so impressed ☺️🤩 Great job - as always !!! 👏🏻👍🏻 A bsolutely fascinating shots and video editing while drilling including background music! 😄 Simply, breathtaking and brilliant! Greetings to all of you!!! 🙋🏻♂️🏆
@TheYeti0072 жыл бұрын
One of the highlights of my weeks is seeing one of these videos post.
@didi01002 жыл бұрын
G'day from Australia . Have been watching your progress since about episode 10 . I am very impressed with the level of craftsmanship demonstrated throughout the project . Tallyhoe has become a work of art , and a credit to all involved . Your team is keeping the skills alive . Congratulations Leo on building a beautiful ship .
@MaesHawkEye2 жыл бұрын
There are plenty of boats in the sea. But only one Tally Ho ! What a fantastic use of KZbin you did there, making us able to see the transformation of this piece of history, allowing you to make it possible in exchange... That is just fantastic, thank you so much Leo, so glad I was able to follow this journey every week since ep 20.
@Frurin2 жыл бұрын
Question NOT to Leo and the team, but to YOU, the guys like me, watching Tally Ho growing up (not being built. but growing). Here is it: Do you, too, watch these videos and find yourselves smiling without realizing it? Not a grin, but a big toothy smile, bordering sillyness!
@TheOnlyDamien2 жыл бұрын
Late reply but I definitely do! The infectious attitude of the crew is also extremely high! Love the people working on it and especially love the boat, it's coming along amazingly and it's hard not to smile at that!
@jiefflerenard1228 Жыл бұрын
Yes and Tally Ho trancends space and time more than any other videos, bringing all that is forever good and right to my small world.
@simong96572 жыл бұрын
Leo, the smile on your face talking about the keel being on finally says it all. Well done everyone.
@woodatwork69272 жыл бұрын
So cool to see the SALT boats there. Two of my daughters have spent time on those boats and one of them sailed the Swift into the Victoria harbour when she was 13 years old.
@engineerernest2 жыл бұрын
Interesting how 326,000 other people waited for this to come out on what becomes a special Monday morning. 346,000 views? Probably much more by the end of the day. Truly an incredible story that has captured us all. Leo: A ship building super-hero.
@RogerAlbertsociology2 жыл бұрын
You've got such a great crew, Leo. You definitely know how to hire people.
@P-J-W-777 Жыл бұрын
Love the wooden boats. It’s so awesome to see they are still being built and operated as well as a new generation learning the lines. I would probably utilize a torque multiplier on those 1-1/4 bolts just to get that extra bit of torque on them. The original keel bolt should be cleaned up and put somewhere on the boat as a piece of artwork and to have a little more of her original parts onboard.
@josec.2782 жыл бұрын
Watching the drill coming out at the keel centre has been quite a relief. Good workmanship. Cheers from NZ.
@petkuscinta9797 Жыл бұрын
The haircut and the answer on how to bolt ballast is the best and coolest :)