How to Make a Monotub **UPDATED**

[@scotth985]

Ashley, I'm that weird guy that emails you occasionally that bought 10 of your tubs. It all started here with this video. To date this is the best video I've watched if you want to get from a to z. I would have emailed you sooner but I started 8 of your tubs on different dates. I'm going to have to look and see what the date was but I've been picking shrooms damn near every day since and watching then grow in between. Since the variety I grow only works 7 days or so apart I have avoided addiction to mushrooms but become addicted to growing them. I gave 2 of your tubs to a good friend with a touch of ptsd and depression. He's gotten hooked now as well. I just want to say thank you. I am now self sufficient. No longer do I slow down to do the speed limit or lower to look in a cow pasture after a rain. It doesn't matter now. I'm going to give 3 of my used ones away tomorrow and create another addict. I'm also going to cheat on you and try growing outside which I hope you won't take personally. For anyone thinking there's no way I can do it you can if you can follow directions. 2 tubs would easily keep someone self sufficient and it is thoroughly entertaining and highly rewarding.

[@intheknow3989]

"Lower to look in a cow pasture after rain"??? What does that mean?

[@jonathanlapointe6262]

I don't know if anybody has said this yet but if you drill in reverse you will likely not crack your tub. Also you can put tape before drilling that will dramatically reduce your cracking as well. Great video though thank you so much for sharing your knowledge

[@yomamasofat0716]

You can also use a heat gun to slightly warm up the plastic making it softer.

[@timbogart3337]

Same trick for vinyl siding and saw blades :)

[@CherryPie0nRS]

Also if you dip the drill bit in dish soap it will help. I worked on lots of little projects where I had to drill holes in many little plastic items. Pre-taping combod with the dish soap dip had very high success rates even with cheap bits.

[@2025s_truth-speaker]

Or heat the bit

[@LAndOfAngelsClothing]

I tried that and it unscrewed my attachment

[@dressedanddepressed2301]

Just spawned my first 4 mini shoebox tubs thanks to you and your videos. Between you,90 second mycology,fun guy fruits,1 up mycology,and Philly golden teacher,I have found so much new confidence in myself and techniques. My anxiety and ocd made me always believe that I couldn’t do it. Thank you guys so much 🙌🏼🍄❤️✌🏼

[@BoomerShroomer]

Excellent!! Let me know how it goes! ❤️🍄❤️

[@dressedanddepressed2301]

@@BoomerShroomer so far so good! We have hyphal knots! Just waiting to see those pins!

[@Madison.Wisconsin]

Decode please

[@DanielBoggs-t4c]

Where do you get spores ? Is it the good mushrooms or ones you just eat for food?

[@DanielBoggs-t4c]

​@BoomerShroomer please tell me how I get all the supplies? Especially the spores and is it the good magic ones?

[@pizzamailer]

Here's a simple tip that I haven't seen in a single monotube vid I've watched on YT.... when you're drilling your holes with a hole saw bit... REVERSE the DRILL direction... If. you run the bit in reverse, it'll drill plastic or plexiglass just fine and reduce the chances or cracking the plastic drastically.. ;). (I'm a long time woodworker.. learned this trick a few decades ago..)

[@yomamasofat0716]

You can also use a heat gun to soften the plastic.

[@nirvaansinghtheartist]

out of all the mushroom growing video's i've seen yours are the best by far

[@BoomerShroomer]

Thank you!

[@UHUforDiner]

Best straight to the point shroom channel.

[@BoomerShroomer]

Thank you!

[@spekky9012]

I love how short and sweet your vids are. Simple straight to the point info.

[@BoomerShroomer]

Thank you!

[@FritzVonR]

I've been researching a lot about how to do this and just ended up with more questions. Until I found this video. Solid gold!

[@2wosiq]

You showed us how to grow from start to finish. But you also taught us how to store the spores and do it all over again!!

[@edsonmelendez2445]

I really like that you're always smiling in your videos and thumbnails. Keep on spreading your good vibes all over the world. Greetings from Mexico City! ✌️😎

[@BoomerShroomer]

Always! Thank you!

[@thegreatecb]

"Good vibes" don't necessarily mean much. What is "good vibes" to one person, may be toxic to the next.

[@wesleybeavers1930]

@@thegreatecb knock it off. This is a place of learning and development, not a place for backdoor philosophy

[@Tolbiny]

Great content as always. Loved the body movement making sure we understood “towards the light” :)))

[@davidnicolson4325]

Love your videos. If you run your drill in revers the teeth of the hole saw will in essence be whipping at the plastic instead of digging in to the plastic, this will prevent cracking and give you a smother hole. but run the drill in forward direction until the drill bit go's through the plastic then revers for the large hole.

[@BoomerShroomer]

Cool! I will give a try.

[@ricky-sanchez]

Thnx for the tip!

[@gunbuckchuck]

I've just inoculated my first 2 bags 🤞🏻🤞🏻🤞🏻 your videos have been a great help! THANK YOU 🍄❤️

[@BoomerShroomer]

Awesome!!

[@josephpark8170]

@@BoomerShroomer may I use black trash bag?

[@doganag24]

You really are incredible 🎉 I am so grateful for these videos. They are so informative and your energy is beautiful. Thank you, thank you, THANK YOU 🌟

[@BoomerShroomer]

Thank you so much! 😊 That's so nice! ❤️❤️❤️

[@harmoneggsarmandlegs481]

Awesome video great setup and hey just a little hint for everybody when you are drilling holes and your using a hole saw like you're doing in this video If you go in reverse to start the hole its a lot gentler on the plastic and makes almost a guide. Once started st the frill back and finish.

[@BoomerShroomer]

I recently started to do this and it works very well! Thank you!

[@iROLL24]

Thank you for sharing that info, also your voice is comforting lol. You remind me of Leslie Mann with your voice and the inflection in it.

[@austinmiller1427]

Thank you. So so much. I'm soooo new to all of this and you are the first person that I have found that makes videos with precise directions and suggestions. I love it! You have a new subscriber. I'm starting out because I was given spore swabs and am still in the process of figuring out what to do with them and how to store them until I am able to use them. If you have any videos you think might help me please suggest them!

[@geo.1]

A round metal cookie cutter/ any hollow metal a few inches, hold with pliers (carefully). Heat, press into plastic,. No cracking, way quicker, less mess, etc.

[@localfatty4364]

You are a life saver!!!! I was just about to drop $150 on a tub and all it’s bells and whistles. But my price is now down to $25.08!! Thank you so much! That polyfil is clutch

[@scotth985]

They work great.

[@GrizzleGear]

I had great success drilling with a 1" paddle bit. I predrilled with a 1/4" drill bit

[@andyballenger38]

The guide looks awesome!

[@BoomerShroomer]

Thank you! 😊

[@LtJAS]

Near 4:02 RE: "once a day open up your tub and fan it" you mean fan the tub *only* during the fruiting stage, right??? Or? Thanks!

[@BoomerShroomer]

Yep, you are correct. Once you switch to fruiting you start to fan twice a day.

[@BossladyRad]

Great refresher to keep coming back to! I appreciate that about your videos!

[@BoomerShroomer]

My pleasure! Thank you!

[@glecko9241]

You could also melt in the holes. I used a heated bottle cap, make sure to do this outside, so you don't inhale any plastic fumes. Gives you smooth and even holes and no cracking

[@coyotedreams3902]

Thank you so much for this. It's really helpful and I appreciate the simplicity. As for the liner, how are you making that and out of what? Thanks!

[@jessicafleming-o1v]

Hi there! Thanks for your videos, they're super helpful. I'm curious, on lighting requirements for the mushrooms. Some of your videos show them and some do not. I have my monotubs in a hutch with glass panels and they are somewhat close to a window however not in direct sunlight. Would you recommend getting some additional lighting? if so how long should they be turned on during the fruiting stage? Thanks again

[@trevorbraden5448]

Step drill bits will prevent cracking and they drill out nice and smooth

[@BoomerShroomer]

Cool thank you!

[@Justin-cv4oj]

I've never tried but have always been told to run hole saw bits in reverse when drilling plastic and pvc and it won't crack or chip as bad.

[@sgold156]

Any tips on using boomr bag as substrate?

[@naturallydope247]

The plugs you linked to are a 1.25" diameter. In the video you mentioned a 1" hole to drill the holes. Is this the right size cap you linked?

[@BoomerShroomer]

Yes, they are tappered. They will work.

[@njeriratliff5918]

Hi Ashley, i have been watching your videos and i love the way you explain.

[@81RonaldStar]

Hi love your videos there awesome 🙂im wondering where you get the red plastic plugs from. ?

[@Royal-x2q]

Deer boomer, can you make that google, or someone, translate your easy guide to Spanish?. I speak English, but not good enough to understand specific guides. Thank you very much for sharing.

[@eliecharlotte]

i will recommend you to a specialist that guided me through my first experience, they ship all kinds of psychedelic products discreetly nelly_psychie

[@eliecharlotte]

On Instagrm

[@andrefancher6561]

Thank you for sharing your wisdom 🙏

[@dnacreations96]

Super sweet! Thank you for this valuable information!!! I love the color of your sweatshirt 😩 You are beautiful!!!

[@BoomerShroomer]

Thank you so much!!

[@JavierESandoval]

Thanks for the guide and for the video! Awesome work! Oh, and I really like the sweater!

[@BoomerShroomer]

Thank you! I really appreciate your comment! 😊😊

[@DC-xw2yb]

Hi Ash.......I'm a bit confused regarding the conditions that best suit both the colonizing of a grain spawn bag, and especially regarding the colonizing of the bulk substrate in the mono tub. It seems that with the red plugs in place during colonizing of the substrate, that there would be virtually no ventilation during that process. Is that what's desired? I had followed another mono tub YT video before seeing yours, and he had 2" holes stuffed with polyfill for the colonization phase and fruiting phase......Ashley, please sort me out!! Much Love&Light......D Keep up the good work!!

[@BoomerShroomer]

Yes, but the tub is not completely sealed and does allow for some air flow. But you can also you polyfil or micropore tape from the start. I just like to keep the humidity up while its colonizing then bring it down for fruiting.

[@alfredmancuso4015]

Hey first time grower, i had green mold in one of my tubs, just removed green mold when ever i saw the mold. The tub does not smell bad , a couple of shrooms ..is this a bad thing...mmm

[@AD-mr4vo]

Hey!! What hole saw size/length did you use for this?🙏🙏✌️

[@robaldridge6505]

what about using micropore tape instead of the pillow stuffing ??

[@mikeabb0tt]

This^^ I was wondering the same. Im testing micropore from colonization to fruiting to see if it makes a difference (not plugging holes). And testing polyfill through the whole process.

[@BoomerShroomer]

Yep! Can use micropore tape too! I should have said that in the video.

[@BoomerShroomer]

@@mikeabb0tt cool. Micropore tape works well too!

[@herbharriss8498]

@@BoomerShroomer FWIW, I have found that most Dr.s and nurses will give you a roll of tape and/or nitrile gloves if you ask when you go in for a visit.Yeah, I'm cheap ; )

[@ricky-sanchez]

@@herbharriss8498 I haven't seen a doctor in 10 years

[@feedback1253]

You are totally awesome. Really love your vids. you give me the confidence to actually start growing some of my own friends. And, love all your helpful links to all the products you use. You are totally awesome ❤👍🏼👍🏼

[@Spacerngr1620]

Once you layer the spawn and substrate. And have the holes plugged does the tub need to be in complete darkness at a certain temp or can it be in indirect sunlight?

[@robinhoodgrowers8076]

Excellent and easy to follow instructions from all I’ve watched here. Very impressive, glad I located your site. Peace

[@seanmcguire7974]

I I'm using micropore tape, should I apply outside or inside of tube? Does it even matter?

[@BoomerShroomer]

On the outside.

[@seanmcguire7974]

@@BoomerShroomer thank you!

[@michaelk5676]

I noticed in one of your other videos you have a light attached to the underside of the lid, Is that required or optional? If so what kind of light? How did you attach it?

[@BoomerShroomer]

Definitely optional. I added for a timelapse. The tub just needs a little indirect light.

[@paulosaraiva1002]

Thank you Miss,,thank u very much...hugs from Portugal!

[@tee228]

hi. do you still recommend using the foam plugs from your site? they seem a lot easier and more convenient than polyfill.

[@lourdehouse2926]

foam plugs fs

[@knutmaccormack]

Where does find the red plugs used?

[@GraceLovely-qw3ms]

hilan_spores

[@eliecharlotte]

i will recommend you to a specialist that guided me through my first experience, they ship all kinds of psychedelic products discreetly nelly_psychie

[@eliecharlotte]

i will recommend you to a specialist that guided me through my first experience, they ship all kinds of psychedelic products discreetly nelly_psychie

[@eliecharlotte]

On Instagrm

[@staceykersting705]

Can anyone tell me how to 'eyeball' a half gram? Would a half full gel cap be a good place to start?

[@THE_RAMALAMADINGDONG]

Instead of drilling you can use a hot coat hanger or soldering iron to poke holes

[@gorillanogin]

Thank you for your videos so far so successful thanks to your simplicity I thaught I'd share that after cracking some tubs if I hold a pice of wood on the other side of the hole I'm drilling and push the wood towards the hole (drill bit) it works every time many thanks all the best

[@voknirk]

Great Video, thanks for sharing it ! But, Ashley, in your Mushroom Growing Guide, (Step 6) you wrote that we need to heat the substrate (during fruiting condition) how do you heat your tube ? I tried a heating mat, but, it "burn" and dry the substrate ... I'm a little bit lose right now.

[@BoomerShroomer]

The tub will keep up the humidity and heat itself once the mycelium starts to grow.

[@mmpatriot2170]

Thanks for a clear and simple explanation.

[@gerhardhattingh7232]

The last question, can I use any black plastic bag for the liner? Like a regular refuse bag

[@BoomerShroomer]

Yep, it's just a little thiner but that should be fine.

[@michaelbetancourt1948]

@@BoomerShroomer Where do you get the liners that you use specifically?

[@BoomerShroomer]

@@michaelbetancourt1948 I bought the material from Home Depot. It’s 4 mil painter tarp.

[@michaelbetancourt1948]

@@BoomerShroomer You need to do a video on how to make your liners, LOL

[@BoomerShroomer]

@@michaelbetancourt1948 I have one. kzbin.info/www/bejne/fXy3hn6Ki9ymoLc

[@777johnp]

Wait, but how big are the drill holes and what for the liner- cut garbage bag or what and how did you size it?

[@BoomerShroomer]

The holes are 1 inch and the liner is 19 inch by 26 inches and I just folded in the corners in with a 2 inch border. I have a video on how to make he liner.

[@garywright5194]

Thank you for the video. Can you please tell me how to eliminate using a pressure cooker? I ordered the Mushroom Growing Guide, but I wasn't able to discern how to circumvent it's use. How do you sterize the substrate?

[@Bearsfan131]

You can steam the stuff in a pot instead, it just takes a little longer. Put your contents in a large pot on a rack with water underneath. Once the water is boiling start your timer. The info I have seen called for doubling the time of a pressure cooker at 15psi.

[@sirgrowsit409]

Just downloaded your guide! Super awesome and easy to follow, a great tool for any myconaut

[@BoomerShroomer]

Great to hear! Thank you!

[@peggybrabec]

For fruiting-? -should I have all the holes in the monotub open or filled with fiberfill? I'm new to this hobby

[@hannashoulders3357]

So I’ve seen a video where someone said you can just take the top lid and just leave a crack open for air to get through so am I able to do that or do I have to add holes for air flow?

[@BoomerShroomer]

Yep, you can do an unmodified tub.

[@ForkFace2112]

You should use a step bit to drill your holes instead of the hole drill. It won't crack the plastic as easily and will leave a cleaner hole. : )

[@BoomerShroomer]

I will try that! Thanks.

[@ForkFace2112]

@@BoomerShroomer Hey, i just finished making a monotub like yours. I got the same brand as you. So do you ever have problems with the lids not sitting flat? The lid on my tub wants to tweak up at the corners and center. Thank you in advance!!

[@BoomerShroomer]

@@ForkFace2112 No its fine if its a bit crooked. You need some air flow in the tub.

[@ForkFace2112]

@@BoomerShroomer sweet i appreciate your help!!

[@jakerand7474]

I see people recommending a step drill bit. That's fine, but if you would like to continue using that bit, just run the drill backwards. It won't crack thin plastic material and will give you a much smoother cut.

[@BoomerShroomer]

Thank you!

[@georgieporgie3843]

I noticed in this updated video you drilled the side holes 3" from the bottom instead of 4" as in your first video. With the holes 3" from bottom does it seem to work better and is this with the 500 gms Cocoa Coir, 500 gms Vermiculite and 100 grams of gypsum mix? Wanted to be sure I had enough depth for the Spawn and Substrate. Thanks and love your videos.

[@carlosmacky6859]

Can you go into more detail about how you make the liner? Or are they premade?

[@BoomerShroomer]

Yes, I have a video on it. kzbin.info/www/bejne/fXy3hn6Ki9ymoLc

[@MJ-gu6uu]

Do I actually need to drill holes? Or maybe it’s fine to just open the lid and lay it upside down on the box during fruiting stage?

[@sgold156]

@boomershroomer where do you buy your agar?

[@claudiusgeyvanpittius4840]

I am missing the link to the Beginner Mushroom Growing Guide, please reply with a link, thanks. Cool video

[@ThaAkumaRed]

Where can I find a shroom spore vendor for California

[@BoomerShroomer]

Probably no where.

[@growmiezhomiez8760]

I just have them sent to a homie in Washington and he sends em to me. Then you just take spore prints or make agar in Petri dishes and clone your biggest fruits... u can inoculate your grain jars with the mycelium that grows on the agar or keep the spore prints in tinfoil for long term storage.

[@growmiezhomiez8760]

@jeffery farah I can send u some spore prints after I get some fruits. I just inoculated some grain jars a few days ago. So it’ll be a few weeks til I get fruits. Email me tho and remind me... [e-mail]

[@sirbrille5160]

Hey :D great video! But now I am really curious if this kind of set-up would also work as a fruiting chamber for grow-kits? Because it is really a pain in the butt for me to drill all those tiny holes into the box that are required for a shotgun fruiting chamber to work properly

[@BoomerShroomer]

Yes, this would definitely work the same. You don't need to drill the holes. You can fan them out yourself. It’s just easier with the holes.

[@patrickmarks7499]

Hello and thank you for your help, Should there be excessive water under your plastic liner?

[@BoomerShroomer]

Sometimes that happens. It’s fine.

[@kevintran1815]

I really appreciate your videos!

[@BoomerShroomer]

Thank you!

[@garyburwasser4829]

Thanks so much for your awesome videos, I have a couple questions How much do the mono tubs smell throughout the process? I live in Arizona where it is very dry, should I use a humidifier? Thanks

[@openpalmclosedfist2282]

Do you still use your terrarium fogger, or have you found it isn't as effective?

[@BoomerShroomer]

I really don’t use it anymore because I spray them down myself. I feel like I can control the environment better. Just a plain Monotub seems to work the best. Been experimenting with different sizes lastly.

[@michaelalan7663]

Good video thanks for posting links Looking forward to more 🤙🤙

[@BoomerShroomer]

Thank you! 😊

[@herbharriss8498]

Get the hole started so the bit will track correctly and then reverse the drill to complete. This should prevent any cracking in the tub

[@gofaraway]

Why do you use 1" holes instead of 2" , is it to keep humidity in the tub ?

[@ElegantDzn]

Hey! I commented on your older video about the spawn bags and just found this one haha! I plan on using Micropore Tape in the fruiting stage...But I've seen people talking about doing 2 or 3 layers of micropore tape on each hole. Could you clarify? Love your videos, you do a great job explaining! I'm going to try and follow your steps for my first grow! :D Waiting on syringes :3

[@BoomerShroomer]

You could put two layers on put I don't think its necessary. I also have foam filters I just invented that work super well too.

[@mr.smiley4263]

What happened to the automated tube? Did you decide it was better to fan and spray instead?

[@jeffreyknieser7490]

Love all your videos (and webpage and instagram!!!). I'm learning a lot (I'm a bit intimidated to be honest). I'll be making my first monotub very soon. I was wondering if' you've tried drilling the holes with a forstner bit? If not I'll try it (since I have one) and report back how it works. Oh, and I really appreciate all the links you listed to Amazon and such!

[@BoomerShroomer]

That’s what I used to drill!

[@jamesmabry5658]

just put tape on inside before you drill .stops splitting in tubs

[@BoomerShroomer]

@@jamesmabry5658 good idea!

[@matthewlechner1698]

Best way I've found is let the inner drill bit penitrate then run the drill high speed in reverse for a few seconds to heat up the plastic the hole saw will be cutting. Some thinner plastics you can cut the whole hole in reverse thicker switch to forward and apply light even pressure after spinning to heat up

[@missbrooks138able]

So you cover alll the holes with the plugs in beginning stage?

[@BoomerShroomer]

I do.

[@andrewharbst861]

What is the size of the drill bit you use?

[@osiriswills6749]

Thank you for this video. Was the method of not drilling any holes in the tub call unmodified tek? Im going to place my substrate into the container tommorow. Thinking about going this route

[@BoomerShroomer]

Yep. You could do a unmodifed tub. You’ll just need to fan when the time comes.

[@osiriswills6749]

@@BoomerShroomer thank you. One last question. Do I need to keep the lid cracked and not all the way shit while fruiting?

[@BoomerShroomer]

@@osiriswills6749 I usually flip the lid upside down while it’s fruiting.

[@osiriswills6749]

@@BoomerShroomer thank you once again 👍

[@lourdehouse2926]

are you posting somewhere else like pateron would like to see updated methods

[@Skippyx]

Can you use that white tape instead of the plugs?

[@BoomerShroomer]

Yes, definitely!

[@americafirst4585]

How long do they get to breathe during colonization stage???

[@BoomerShroomer]

Usually 7-9 days for colonization.

[@americafirst4585]

@@BoomerShroomer I mean as far as the duration of the top off when you fan the gas away

[@juantamad5784]

Can I use a dark colored monotub? Thanks.

[@ckeel12201]

Idk if you reply to comments but we bought the inflatable tub and stuff and we think we removed the red caps to early and began the fruiting instructions based off the paper,(which looked more like what we had vs the video where it looked a lot more colonized then comparing to what we had on the paper) should we leave the sponge plugs in or move back to the red plugs till the top of the mix looks more colonized? If I had to guess based off the video we are prob 50% colonized rn.

[@busyhero]

I'd love to do this same set up, but like, half the size. If you're doing this on a smaller scale, is there anything you'd change? Would you drill smaller holes? Or maybe just fewer?

[@BoomerShroomer]

No, just use half the recipe and do everything the same.

[@busyhero]

Ok, thank you! =D

[@oscormeyer2283]

I’ve grown in a clear container and it was fine. But has anyone used the black tubs from Home Depot? Wouldn’t it be better and a liner wouldn’t be necessary, right? Any help would be great

[@jaybowden9340]

So why do you need to plug up the holes during colonization, couldnt you just leave the cotton in the holes to keep fae going?

[@tomascontreras-xo6gj]

Where do you order your plugs from again?

[@josephflanagan2527]

Hey! I was interested in growing turkey tail mushrooms in a homemade monotub, but do I need to add moisture in the monotub, like with a humidifier?

[@charleslakejr.6542]

tip for when drilling the holes in your tub with a hole saw once the tip of the drill bit goes in change the drill to reverse for the rest of the cutting

[@TheReal_Pim_Tool]

If you plug the holes during colonization stage, won't that prevent air/gas exchange?

[@BoomerShroomer]

It’s not plugged super tight. There is some air exchange. It keep the humidity up during colonization.

[@Shunya0101]

Amazing. I love your videos. Thank you.

[@suzjayy5115]

Hi, can we use micropore tape the entire time?

[@JeannaBreitwieser]

I can’t find the link to order. Can you please help.

[@Steven-yg4kc]

Hom many subtrate do i have to use if my box 45 liters? I want to grow oyster mushroom

[@BoomerShroomer]

You can use the same about. 45 Liters is not that much smaller. The substrate will be a little thicker but thats fine.

[@Steven-yg4kc]

@@BoomerShroomer you have the details information in KG?

[@simonsonben14]

Have you had any experience with pf red spore. I used wood grain and soy hulls and some coffee grounds mixed into the spawn bags. Im worried it might have been a tad too damp. Just trying to get your thoughts or advice in general.

[@BoomerShroomer]

You definitely don't want it too wet. Can you send some pictures to me via email? [e-mail]

[@noweare1]

How to keep high humidity in the chamber with all those holes ?

[@manman1277]

I'm worried I didnt spray the sides of my monotube enough to for colonization and I dont want it to dry up the substrate but also know I shouldnt open it I was wondering if there was anything i could do

[@BoomerShroomer]

It will create humidity itself. Just wait a few days and see if any condensation starts to accumulate on the sides.

[@manman1277]

@@BoomerShroomer thank you so much!

[@Домашниймальчик-ф3д]

Always like and thank you.Extremely usefull content. PS Can i use for monotub plastic sheet of different colors.Maybe gray like i have now.

[@BoomerShroomer]

Are you talking about the liner? It can be any color as long as its opaque. Thank you!