Can You 3D Print A Useful Arbor Press?

Рет қаралды 57,594

Chris Borge

Күн бұрын

Пікірлер: 167

@lukasbasques 4 ай бұрын

This channel is the number one reason of why I’m getting a 3D printer (and some bags of concrete)

@evanbarnes9984 4 ай бұрын

Dude I think my 3D printer might just be my single best purchase ever. It's a toss up between that and my paraglider. I know this won't be the experience of basically anyone else, but purchasing a 3D printer directly led to me getting an incredible new job that perfectly matches my interests and skills designing robotics toys. I was a teacher before that. Even if that doesn't happen, 3D printers are incredible tools. I used to think they were just for printing flexible dragons and iron man helmets, but they're quite possibly the single most versatile tool humans have ever created. This channel really showcases that fact. Just do yourself a favor and don't go cheap. There are a bunch of great mid range options out there now that are absolutely reliable workhorses. I know people love their Ender 3s for whatever reason, but I've never seen someone use one of those without immediately spending the price of the printer all over again on upgrades just to make it usable. Personally I love Prusa. They are more expensive, but we use them at work to prototype injection molded parts. They have thousands of hours of print time on them, and never once have we had to do repairs on them. I just keep the beds clean and the filament dry. Also they're FOSS/OSHW, and that kicks ass. We also have Bambus, and they are faster, but they're a bit less reliable. We've had some break down already. They also aren't as dimensionally accurate, but I think that won't matter as much for most use cases. Good luck on your printer adventures! It's a super fun world to get into.

@widget5963 4 ай бұрын

@@mid88night I sometimes joke that I used to have an Ender 3, but now I have an Ender 3 frame with a completely different printer on it. But in comparison, I have a Magneto X now, and that thing required no tuning besides setting a bed mesh. I actually went through all the standard stuff and ended up pretty much the same as how it started. I think the Bambu printers generally have an experience like that too, although they're a bit more proprietary when they don't need to be. Personally I think 3d printing is getting into a pretty great place where pretty much anyone can just pick up a well tuned printer and immediately start printing with cheap engineering-grade materials like PETG-CF that are commonly only $25/kilo. Even PET-CF is getting down there and giving polycarbonate a run for its money.

@GabrielAlejandroZorrilla 2 ай бұрын

@@mid88nightor if you want a tool and not a hobby just get a Prusa or Bambu Lab.

@saintjohnny45 Ай бұрын

@@GabrielAlejandroZorrillaSome people prefer the hobby.

@GabrielAlejandroZorrilla Ай бұрын

@@saintjohnny45 Creality is still doing business for them!

@MatchaMakesThings 4 ай бұрын

Love the ending where you say "not everything makes sense to 3d print" It seems like such a no brainer to so many problems, but there are often better solutions.

@DecDude84 4 ай бұрын

an idea for a future build, a vibratory build table. You put future-future builds on the build table, it vibrates, and helps the concrete settle.

@jksjrgfpsjgr 4 ай бұрын

hes using an hand sander for that.

@DD-DD-DD 4 ай бұрын

We know. We watched the same video you did. He's talking about something completely different. For one, it would free up a hand.

@kalsaraan 4 ай бұрын

You are quickly becoming one of my favorite design channels.

@MatchaMakesThings 4 ай бұрын

Agreed!

@Hallworks 4 ай бұрын

was gonna comment this 4 videos ago

@themistoklisanastasiadis 4 ай бұрын

you should consider with putting the lever gear behind the rack. that way you will push down on the lever instead of up, helping the press body not fail. awesome design too. maybe if the rack was a bit thicker, the forces would be greater. keep up the awesome work

@jasonthomashorn4794 4 ай бұрын

Yup this. Both behind and wider rack. And awesome work, concrete as a filler is pretty novel. Chicken wire is easier to install but still provides some flex compared to something like grid wire. It probably doesn't make a difference now but if you get into the higher torsion it would.

@jasonthomashorn4794 4 ай бұрын

Chopped fiber glass is a good filler. And even fiberglassing the outside would work wonders and relatively cheap

@munkysthrowpoop 4 ай бұрын

That’s what I was thinking. Lifting upward seems really awkward to try and do while trying to keep the actual press on the table.

@thigo94 4 ай бұрын

I was looking for this comment, had the exact same thought.

@lsav1085 4 ай бұрын

I can't believe that 3D printing and concrete ate not more widely combined! Great video, thanks!

@Okuhno 4 ай бұрын

I love the acronym for the bathroom scale

@georgewolf7063 Ай бұрын

My brother and I built me a Voron 3D printer, but your videos have shown me just how useful it can be in my work shop!

@Extner4 4 ай бұрын

The assembly with the minecraft music in the background and the tape peel after the concrete pour is always the best part.

@googleyoutubechannel8554 9 күн бұрын

I like your build style, you've basically figured out that metal + concrete is strong, and all the designs are now just a way for plastic to constrain metal + concrete, solid.

@blahblahblahblah2933 4 ай бұрын

Nice video. With respect to the concrete, it seems like it's normally in tension and shear (while the press is pressing). Concrete is strongest in compression and worst in tension, so it seems like it'd be useful to post tension the concrete to preload the structure. That way it'd be in compression until you overcome the preload force of the post-tensioning. Granted it's moot since the concrete isn't the weak point of the press.

@leifhietala8074 4 ай бұрын

Add an idler (or two, one on each side of the head) to transfer motion to another driving gear on the back side of the rack/plunger. That'll cut the load on the gears in half and should allow you to get to the magical 100kg target.

@wildgophers91 4 ай бұрын

Have you considered using a CSA based concrete? Here in the states we have "RapidSet" and they even sell additives to increase flow. You may also want to look into "plasticizers" for cement. They are additives that allow you to use less water. Then you can add stuff like glass fibers without ruining ratios.

@Rouverius 4 ай бұрын

Just gonna say it: 98.9 is the new 100. Good on ya!👍

@kyleisah 4 ай бұрын

I think you might have this backwards. The pinion gear on the shaft from the handle needs to sit behind the rack, with the rack gearing being on the back of the rack. That way, downward movement of the handle translates to downward movement of the rack, which should reverse the load direction the frame is seeing. At least, that seems correct in my mind. The rack/pinion teeth will still be the weakest part, but I’m curious what moving the pinion behind the rack would do. Loved watching this though!

@kyleisah 4 ай бұрын

Yeah, with every arbor press I’ve ever used, the gearing on the rack is on the back, and the handle/pinion shaft and gear sit just behind the rack, which translates the movement that way.

@massimoraso Күн бұрын

mate, the things you do in these vids are utterly fascinating. thanks for the effort you go to for making these.

@ivolol 4 ай бұрын

Bruh your tools are so cool. Could easily become reference standards of open source tool design. Use of concrete as reinforcing tool for plastic seems like a niche in the space. I wish you every success and hope you are inspired to create more awesome stuff like this, challenging what "3d printing can't do". Lord knows its entertaining to see happen. Great work

@joshbeaulieu7408 4 ай бұрын

So at this rate I am going to furnish a shop using your designs. Thank you kindly. I just started printing with ABS to make myself a VORON, and after that I want to try making some of your tools. Thank you kindly for all your work.

@grantprice613 4 ай бұрын

Figured I'd compile some of the most useful tips on your hardening process: Use a higher alloy steel. These can be commonly found as "Grade 8", "12.9 metric" or "Alloy steel" bolts. These have more 'potential' for hardening than mild steels, which most cheap bolts will be made out of. Use a stirred ice/salt water quench instead of an oil quench. Oil quench is most common on tools where it is useful to trade a small amount of hardness for increased ductility. Your punch will not need ductility to resist impact, so try to make your quench as harsh as possible. If you can enclose your part while you are heating it, even between a few common bricks, you will find that you can reach orange-hot temperatures much easier. The camera can be deceiving, but it seems that what you reached was red-hot, which is below the heat treatment temperature for many grades of steel. Best of luck!

@DaveEtchells 4 ай бұрын

Excellent tips, thanks for sharing! (I hadn’t thought of using 12.9 bolts as hardenable stock before. What’s their alloy, do you know?)

@RNMSC 4 ай бұрын

If you are unable to locate higher grade iron for hardening, see Chris' (Clickspring) video on case hardening as an option. I'm not going to suggest it is better than using pieces of drill rod annealed for shaping and threading, then hardened and tempered, but it's better than not doing anything.

@homemadetools 4 ай бұрын

Clever 3D printing idea. We shared this video on our homemade tool forum last week 😎

@Dangineering 4 ай бұрын

I have never been so blown away by a channel before. Another amazing tool.

@BobWidlefish 4 ай бұрын

I would love to see the limit of the other parts of the design by you iterating a few more times on the rack teeth until they’re not the failure point. In principle if you have high strength concrete shaped in relatively favorable triangles of the given inner dimensions providing a strong base for a lot of leverage. It’s not that surprising the thinnest plastic feature is the first to go, for sure. You are a great toolmaker and craftsman, excellent work!

@lowrads3653 4 ай бұрын

Seems like a cross slide vise is the next item to turn the lathe into a mill.

@johnhill5759 4 ай бұрын

Graphene impregnated cement? Love the detailed design work you put in for no nonsense final builds

@CruzMonrreal 4 ай бұрын

It's so close! You could totally reach it if you change up the gears and rack. Increase the pressure angle for thicker teeth, a larger module fir physically larger teeth, or changing the material for something more durable

@Mkz0r 4 ай бұрын

3d printed one looks better than bought online !!!

@CWModelling 4 ай бұрын

I found your channel a while ago and I must say that I personally have no use for which to copy your designs BUT I am fascinated by the whole process of what you make.....Garden shed engineering at its finest 👍

@chrisgill5692 4 ай бұрын

Great video. Why do you have it geared/orientated to lift & push, rather than pull down the handle?

@802Garage 4 ай бұрын

Not something I had considered, but very cool!

@bescobarca 4 ай бұрын

Good video, just a tip, the press should tighten when lowering the lever on the front. This helps minimize twisting and make the force more vertical. I would move the gear behind

@aidandavy4303 4 ай бұрын

Loving the increase in uploads probably my biggest inspiration so far to start designing parts myself and get off thingiverse :)

@user-cg3em4cw4f 4 ай бұрын

Love to see the creative solutions you come up with for pushing 3d prints to their limits! I'm working on my own concrete CNC lathe at the moment since you gave me the idea. Can't wait to see what you'll produce next! I did however forget to sift the aggregate out of which was a bit of an error on my part as stuff did not flow nearly as well.

@IdRatherBeMaking 4 ай бұрын

Nice! I've made some crude concrete based machines but WOW, yours look better than mine! I have suggestions! You may want to consider is putting the rods through a single metal plate on both ends. The plate will increase the compression on the concrete, tie the allthread together, and give you a stronger part. The way it is now the nut only compresses the concrete directly under the washer and you could crack it in the space between the threaded rods. 2) I started 3d printing funnels to guide the concrete into the form, if you run tape around them it keeps the concrete out of the layer lines and makes it much easier to fill. 3) for the rack, consider tying in another geared rack on the back. More threads will give you a stronger column. SO CLOSE! :)

@GarpDesigns 4 ай бұрын

I like all of your designs so far - just one question regarding the Arbor Press - is there a reason for lifting the handle up? as most all press's pull down on the handle so theirs no need to fix the base from moving and you should get a better feel of the force needed, I think your design would work better pulling down? Might be worth a try?.

@TinkerLynx 4 ай бұрын

That's all I could think of while watching, it's the wrong way from any press I've used or even seen. Fixing that would make it stronger and nicer to use.

@cactus7027 4 ай бұрын

Another amazingly crafted tool and design. Thank you for doing what you do!

@D-One 4 ай бұрын

A bit crazy but also very interesting, it looks like with just a couple of cheap metal parts like rack and pinion this would actually be very capable. Would love to see it tested.

@Tarh 4 ай бұрын

I have found that concrete makes PLA very brittle. I can't use a mold printed in PLA more than once, but I have no problem with the mold printed in ASA. Have you noticed that too?

@E50creative 4 ай бұрын

NIce work on the 3d renderings quality work i can see you easily growing to 2m plus subs at this rate your a natural bro nice work nice work

@rsilvers129 4 ай бұрын

You can anneal the rack to make it stronger. You can also try PLA Plus.

@lv_woodturner3899 4 ай бұрын

Very interesting build. The metal in the bolts may be an alloy which cannot be hardened. In the US O1 drill rod is a common alloy which is normally sold in the annealed form and can be machined easily then hardened and tempered.

@moccaloto 4 ай бұрын

I've been waiting for you to make one of these. Well done 👍

@Roobotics 4 ай бұрын

Long time enjoyer of your videos, thank you so much for this series. I think I came up with a very interesting idea for a limitation I can tell you fought with. For a press there is a balance between parts accessibility, and the presses core strength. But what if you could have both options depending how it was configured at use? Basically to get down to it, a nice chunky bolt that can be installed right behind the press arbor or at set increments of depth. If increments were used, you could even leave multiple installed all in a row for added tensile strength, until a part dictates a needed clearance. With this idea a lot of the forces generated would be shunted into the metal instead of flexing the concrete and mesh structure (simply having one installed, would turn that force back into a compression load.) Also I wonder if your gears would be more robust in Nylon, ASA, or maybe even PETG.

@makegrowlabrepeat 4 ай бұрын

Chopped fiberglass(about 1cm) works well for "rebar" in these types of projects

@RNMSC 4 ай бұрын

Have you considered replacing the rack with a course thread 15-20 mm bolt with 3d printed guides to square the profile up through the press? You are after all, already using an M8 bolt or all thread to compress the layers in the rack, You would need to change the helical gears angle some, and could include extending the threading shape across the square profile the bolt is in to hopefully reduce the stress on the driving helical gears.

@DaveEtchells 4 ай бұрын

I was a bit surprised you didn’t make the rack and gear wider initially. It would have changed the svelte proportions, but I think the other components could have handled a good bit more force, especially with the threaded rods holding things together.

@bear2c 4 ай бұрын

How about adding a heating system to the end, so it can press heat inserts?

@mattylarkspur9858 4 ай бұрын

that was my first thought too!

@lawabidingcitizen5153 4 ай бұрын

To harden the steel you need to get hardenable steel, 12.9 bolts might work

@andymuzzo8568 4 ай бұрын

Don’t try to harden 12.9 anymore you make it to brittle

@Streetduck 26 күн бұрын

Hi, wieder ein mal ein tolles Video, ich mag dein Design und bin gerade dabei den Ball Vice zu Drucken. Ich werde aber statt Beton ein Mineral Epoxy nehmen und in der untersten Schicht dann noch Bleigewichte von Autofelgen hinzufügen ... ich liebe Epoxy und halte es für die bessere Option 😉 Danke für deine Mühen, und gratulation zu feinen Design Erfolg! 👍 *Wird diese Abor Press auch irgendwann freigegeben? Ich frage für einen Freund 😉🤣*

@Aaku13 4 ай бұрын

love the vids man, so well produced for such a new channel. keep it up man!

@SpeedRunningStartups 4 ай бұрын

This is exactly why i want to build my website

@The3DPrintingGrandad 4 ай бұрын

Your videos do inspire me.

@simonebiuso3098 4 ай бұрын

Next make a mini 3dprinted cement mixer!

@sackville_bagginsess 6 сағат бұрын

What about some fancy strong filament for the gears?

@sveinarsandvin6418 4 ай бұрын

Wonderful. Teach us more.

@jlrebor2626 4 ай бұрын

to put a complaint, the handle works opposite of what i would expect and males less sense if you ask me, idk if this was made bcs of some difficulty, but pushing up to push down feels wrong af, and i feel like it makes it less stable, as i said idk if there was any problem, but it was a thing of changing where the rack and the gear is, just turning them around would have give you a down movement for a down push, like a drill press, if this was by choice or preference then cant say anything about it

@DeverSonic 4 ай бұрын

When the Minecraft music comes on you know chris borge is about to fucking cooook

@TheVgonman 4 ай бұрын

Love the SVU comments! 😀

@gruvinnz 4 ай бұрын

Why do you have the wrack gear at the front, such that the lever works against the applied force, needing to be lifted up, rather than down at the hold point?

@Fyreye 4 ай бұрын

came to the comments section to ask this same question! I wonder if changing the direction of the lever's force would add that extra little oomph to get the clean 100, since you wouldn't be applying torque in the opposite direction of the main force

@Fyreye 4 ай бұрын

Was just thinking of getting an arbor press and was wondering if you had done any experiments in that arena 😆

@doxielain2231 4 ай бұрын

Now you can make a heated tip to insert threaded inserts

@tannergilliland6105 4 ай бұрын

The Minecraft music goes surprisingly well with this.

@julias-shed 4 ай бұрын

Really good project again 😀 wonder if a different helix angle would be stronger?

@jimysk8er 4 ай бұрын

you have a partial tooth failure because the forces are pushing the rack and pinion apart. the more you push down on the bar the more force is acting against you in friction and in deflection and the deflection is also decreasing your grip. all to say that you made a press with a compliance based cap which would be great if you needed to ensure that can't exert more that 100lbs on a part that is more expensive then the press

@jbrownson 4 ай бұрын

Excellent thumbnail

@TheJacklwilliams 4 ай бұрын

Ok Chris, ive been following for some time. Enjoy your design choices and skills immensely. I have to ask, watching you spray paint, do you have a couple hundred pounds of orange filament? Aka why dont you simply print the black pieces with black filament? Killin me. Everything else you do makes complete sense to me. This one, boggles my mind… lol, thanks for sharing all your work!

@ransombot 4 ай бұрын

I was going to say use hardware cloth but looks like you did.. You ever try fiber additives for concrete? Should add even more strength to it with minimal investment. It'd be fun to see your press test different samples of its self sorta like C&C kitchen does with 3d prints. Not sure if it interests you but there's some microwave casting videos on youtube that you could probably cast the rack and pinion in bronze or aluminum and pass your 100lbl goal. Not much cost in getting into casting that way as you can get ones with broken lights and carousels things from family, ebay, or dumpsters fairly cheep.

@rickharriss 4 ай бұрын

Yo8ur bolt is mild steel. Not enough carbon to harden. you could however case harden it. Look up the process.

@Amin-js4su 4 ай бұрын

RAAHHHH CHRIS BORGE UPLOAD

@Ernzt8 4 ай бұрын

Great experiment!

@tythetasmaniantiger7 4 ай бұрын

Really impressive

@KnexJunkie 4 ай бұрын

yeah buying one but whats the fun of that? nice project. maybe at a serten point it might be worth 3D printing it compared to a store bought one. Stil depending on what you need to Press into stuf this could maybe be a better choice.

@snapo1750 4 ай бұрын

May you allow me the question: Did you ever consider using a geopolymer instead of cement? (Waterglass , Alkali activation, Metakaolin) Alkali activation lye , burned white wood ash Metakaolin (calcinated kaolinit) the mixture in the right way would create granite and should be much better than cement

@Rollmops94 4 ай бұрын

Should be pretty simple and cheap to get metal gears. I really wonder what ways there are to achieve higher pressures. What are design techniques used in real presses?

@BadgerRobot 4 ай бұрын

To harden steel, it needs a higher content than standar bolts tend to have.

@LaGrangeDeSteepy 4 ай бұрын

Incredible you did it ! :D

@petergamache5368 4 ай бұрын

The cheapest 1 ton arbor press I can find in the US is at Harbor Freight, for $70. Given that they regularly have coupons that give you 20% off of a single item, if you're patient, you could get it for under $60. The frustration factor involved in the "DIY arbor press" seems to make that purchase an easy decision. :)

@littlehills739 4 ай бұрын

two gears to the pinion ? to 1 gear to the handle ? and if u export ur cad work to dfx u might as well get it laser cut thinking along the lines of if you ebay parts like long bolts then theres no difference in ordering laser cut steel plates

@Defeshh 4 ай бұрын

I love this channel

@rajanpanchal3699 4 ай бұрын

This is great! How long do you think the rack and pinion would last if the max load is about 25 kg? I am interested in making one for my own uses that don't need high load.

@3dpartner 4 ай бұрын

you should start to think out of the box regarding position your prints, the base should be much more stable when you place it at the corner at the back.

@notyouraveragegoldenpotato 4 ай бұрын

Spare car scissor jack, couple metal scraps, cheap welder. Bam, easy 1.5 ton press (or whatever tonnage you want just swap out the acissor jack😂 i use it every day

@segment932 4 ай бұрын

Tip. Try to print every thing at a 45 degree angle. Prints often get much harder that way because each layer get a larger area to adhere to the previous layer. Check Slant 3D he talks much about that.

@gustavo76016 4 ай бұрын

maybe you could try with a Fly Press Head? I think a Screw could withstand more force than 3D printed gears

@conman3609theoriginal Ай бұрын

what about Lost PLA casting the gears in Aluminum or Aluminum Bronze this might get you to a more durable and capable tool?

@Donnie-uw5kz 4 ай бұрын

i say make the gears out of PETG and to more wall layers or make it solid, based on the color of material it looks like your using PLA

@lowrads3653 4 ай бұрын

Might as well get some doming tooling for buttons or other minor planishing activity.

@lowrads3653 4 ай бұрын

These kinds of presses are also useful for putting watch cases back together. You tend to need a bunch of different sized plastic dies to keep the glass from being stressed.

@king_james_official 4 ай бұрын

9:10 cool plug vro

@Yy-ig6fm 4 ай бұрын

The steel you used for the punch may have been austenitic stainless, which isn't hardenable. It would be better to use high carbon non-stainless steel because it's easier to harden without weakening it. There are lots of stainless steels that will harden up too but they usually have a more involved heat treating process with holding times and are less tolerant of mistakes. For your application you can just hit some carbon steel with a blow torch to a red glow. (not yellow, not orange) and quench in oil. Then if you feel like it you can heat treat at about 175c in your oven for a couple hours to make it less brittle. This will drop the hardness obtained after the quench a little tiny bit, but this will give the part a lot more strength compared to using the steel without doing so.

@i-mine-clay562 4 ай бұрын

the minecraft music in the backgrond was triping me up thinging my game was running

@davidaraujo2049 Ай бұрын

A stack with teeth on two sides and gears on two sides of the stack head would probably be more powerful as the load would be spread between both

@CryoRaid 8 күн бұрын

Is there any way to get the 3D models for these? I'd love to try to make my own tools using these designs. I'm wondering the feasibility of combining this stand with elements from the drill press and tapping machines to make one stand with interchangeable heads. I know I could design it myself from scratch but I lack the time so figured maybe I could get a head start with the existing files.

@magicshon 4 ай бұрын

Just recently i looked at all the 3D print arbor press models i could find with the idea of printing one to rivet kydex for knife sheaths. I was wondering if they would possibly hold up even at 100% filament and seeing that yours even with concrete fails at 100kg i am pretty confident the others wouldnt hold up either. I like the idea of two screws instead of a square axel, i will remember that for when the need arises. But what did they connect to? The black part has to still go through the red one on some axel and into the middle gear, where i would expect a square to go through? Lastly do you design your own gears or are those automated? Would maybe larger teeth hold up better? Or possibly teeth that have a longer straight section on their tips.

@wildgophers91 4 ай бұрын

My gut reaction to the title: "But a small arbor press is so _cheap_ and easy to buy, why would you go through all the hassle of making one?" Excited to see what the authors conclusion is.