Borgeson Power Steering Conversion 1967 Ford Mustang Desert Save Project Mut

[@freddiemac2847]

That is a nice bit of kit for the car, looks great!

[@TMAN0950]

I used the same steering in that red conv. That I sold. I loved the way it worked. I had to add some hose to one hose to get it off the exhaust manifold, but I would do it again. I had to cut my column 2 times. Thanks Rich

[@MustangConnection1]

Terry, I remembered that when I reached out to Borgeson, they couldn't have been nicer. Hope you are well.

[@Raptor_428]

I have a 1965 mustang that I just acquired so I'm really digging the videos 👍

[@65coupestang]

A fastback/sportsroof as they call them might I ask 🤔..??

[@65coupestang]

Same here I have a '65 hardtop coupe style and I like these videos as well except the only thing is they don't wxactly show you how to do the different things to the vehicles 😤🤬..!!

[@ehrldawg]

Post Vis !!!

[@RustyGlovebox]

That looks like a great kit and except for the adjustments to the column looks easy to install. Thanks Rich and take care

[@MustangConnection1]

Lloyd, I am looking forward to seeing how it performs

[@harveymushman8209]

Great job Rich

[@MustangConnection1]

Thank you !

[@Ski_zaBoi1776]

Looks great thanks for another awesome video

[@MustangConnection1]

Thanks Mike, glad you are enjoying the updates. Please make sure and spread the word!

[@TheShadeTreeFixitMan]

Nice looking unit, Rich.

[@MustangConnection1]

I am excited to try it out

[@mikeward2922]

68 fastback in my garage and it needs a steering box replacement. Talking with opentrackerracing guys for this kit and also the z-bar made specifically for the borgesen box. The z-bar not only snakes through long headers but is built to work with the borgesen box. Pretty cool.

[@wadesoutdoors1914]

Good progress

[@MustangConnection1]

Thanks Josh!

[@saabtech3510]

Thanks for the update!

[@MustangConnection1]

Thanks for watching and commenting

[@Buckswoodshop]

Nice work.

[@MustangConnection1]

Thanks Matthew !

[@michaelteel8490]

That was an awesome video! I am soon to do the same project on my 67. I noticed on the instructions it says you only need to cut off 1-2 inches off the column. How come you needed to cut out a lot more? And since we have pretty much the identical setup.. do you remember the exact final length of the column? I know you mentioned it already in the video but just incase you made minor adjustments at the end

[@norbertodevargas7722]

will that setup work on a 67 mustang 4 speed with headers and what is the part number

[@thecapitalalliance]

I wasn't aware there was a new steering shaft used until well into the video. What steering shaft did you use?

[@XLE-t8b]

Forgive me for asking stupid question but I'm a young foreigner who lives oversea, looking to purchase 1967 mustang as a project car..... something I could not find online/reddit/forums but is it common for folks to install modern day power steering wheel in 67 mustang? I love the old classic car but couldn't stand driving ones without power steering especially in low gear... Thanks in advance.

[@norbertodevargas7722]

Will that setup work on a 67 with a 4 speed with headers ? and if so what is the part number thanks.

[@ricksmotorizedbikeprojects9572]

I've got a 70 mustang and I'm seeing that I don't need the slave cylinder or control valve if I use this upgraded borgeson gear box?

[@MustangConnection1]

Yes it replaces those

[@HotrodPlumbing]

does the new shaft just slide into the new borgeson gear box through the inside of the car?. I have a 1 piece gear box (early 67), and my motor is in car. im thinking about cutting the sector shaft to make install alot easier so I dont have to pull motor or suspension. just wanted to make sure the shaft slides through car into new borgeson gear box first?. thanks!

[@cutworm59]

Hiya Rich this is Steve Rains. How much for the kit? Thanks brother.

[@huck01955]

very cool

[@MustangConnection1]

It's coming along Joe!

[@marcosgonzalez-ob9re]

Is this possible with the engine in place?

[@MustangConnection1]

It is but you will likely need to remove the exhaust manifold

[@bassdude1978]

How long did the conversion take in hours?

[@ismaelvillegas5676]

Hi, I have a mustang 67 and I want to know how much you spend on parts?

[@MustangConnection1]

Ismael, I am not sure what you are asking, how much on what parts ?