BorgWarner Turbo Upgrade | EFR Series 8374

[@michaelparham2711]

I got one on my Ecoboost and its nuts! Im making 221whp at 9psi!! Just started tuning today! As you caqn see at 18psi Ill be close to 450whp and at 20 to 22psi I dshould make 500whp using this turbo! The jet engine whistle sound it makes is intoxicating!

[@maperformance]

Time to turn it up for sure! 💪

[@markjmaxwell9819]

Nice Turbo Absolutely state of the art !!!!!!

[@djjones2723]

would love to see this on the new 2015 mustangs

[@denseleit]

I wonder how this would work on my 6.7 powerstroke over the stock 2017 one?

[@yaboitorso5455]

I already have the efr 6258 and pushing 18 psi, making 265 whp on a b230 redblock, will i be able to make around 500 with this specifik turbo?

[@Breakchecks]

What turbo would you run in a n54 fully built bmw 1m?

[@1truzilla458]

So I'm thinking about going with this turbo for my 1997 Skyline GTR, I swapped the motor to a RB30 and have been doing research as to what's the best size to get me to the hp I want. I'm looking for 750-800 hp. On normal BW systems a 63mm .95 a/r would get me there but I'm not sure with this type of setup. Please send me some information so I make the best decision. I'm hoping for fast response and little drop off at high RPM. If this turbo does well I'll swap the one on my RX7 to the same system. That I'm running a 20b street port and Borg Warner s480. Because of the lag on that car I don't see boost until 5500-5800 RPM's, any help would be well received...

[@maperformance]

+James Thomas Hey James, your question is a little too elaborate to effectively answer online, we can happily talk to you and help you out with any questions if you want to give us a call. 1-888-MAPERFORMANCE !

[@keithbjelland1813]

Will this fit on a 2017 MUSTANG ecoboost premium.

[@maperformance]

Give us a call Keith! We have a number of turbo options for your ride. 1-888-MAPERFORMANCE

[@JdmJdmVtec]

will this turbo fit on stock location? or does it need after market turbo manifold? im looking to get it for my 2012 evo x gsr, let me know what should i need. thanks...

[@maperformance]

This is not stock location, BUT we have quite a few options that would be stock location. Or we are happy to get this one to fit properly with our EFR kit! Give us a call.

[@Meclon88]

the 8374 turbo can get good response with my 1jz fully forged engine for drifting ?or I need a smaller one ?thanks

[@maperformance]

Yes, absolutely a good match up! If you want to discuss specifics more, give us a call!

[@Br0Ck4Mc]

Hi, this turbo needs a blow off valve and a wastegate valve?

[@AdamChase87]

You can get it with an internal or external wastegate. The BOV is integrated into the compressor housing

[@101criminal]

Wouldn't mind getting someone to talk to on this, Trying to get my ecoboost upgrade but CA has some picky laws any one know which are "allowed"

[@maperformance]

Typically it is more of an exhaust or downpipe question - but we are very happy to answer any questions you have! What is a good way to reach you?

[@101criminal]

MAPerformance send me a PM and we can swap info :)

[@maperformance]

Doesn't appear to be a way to send you a PM on your page

[@fmn716]

What would you suggest for a 1uz

[@maperformance]

Hey George! Give us a shout: [e-mail] we'd love to help out.

[@TheMoodyedge]

The wastegates are shit.