BOSCH ADS 525X (Misfire Case Study)

[@80sfordguy]

SD most of my instructors told us this at WyoTech!!! All straight six engines from all manufactures use the same firing order because they all are a 120 degree design of crankshaft. 1, 5, 3, 6, 2, 4, just remember 15, 36, 24 like this and the same goes for dating women (15 - too young, 36 - too old, 24 - just right)!!! They told us this the 4 strokes of IC engines are easy to remember because these are the favorite things guys want from women (Suck, Squeeze, Bang, Blow) intake, compression, power, exhaust!!!

[@InsideOfMyOwnMind]

This reminds me of the resistor color code that my HS electronics teacher told us. Better Black 0 Be Brown 1 Ready Red 2 Or Orange 3 Your Yellow 4 Great Green 5 Big Blue 6 Venture Violet 7 Goes Grey 8 West White 9 But if he liked you it was Bad Boys R*pe Our Young Girls But Violet Gives Willingly.

[@80sfordguy]

@@InsideOfMyOwnMind lol, good one man, no I’m forgetting that acronym now!

[@markchidester6239]

At 54 years old, 36 sounds really good!

[@80sfordguy]

@@markchidester6239 yeah I gotcha sir, I was 28 when my instructors told me those phrases to remember the basics I already knew as a joke for the rookies, but now I’m 39 and have a 14 year old son, wouldn’t touch a 24 year old woman in fear of a heart attack and my wife is 37 years old so I’m in the same boat as yourself.

[@robertmedina6875]

@@markchidester6239 funny how the older ya get you perspective really changes! I am 50 yrs old . I have 17 and 18 yr old daughters! Also a 27 yr old Marine and 3 grandchildren!

[@johnaclark1]

I was using an Autel DS708 that I bought a few years ago on Craigslist for $250. It worked well but I just recently picked up a used Autel MS906BT. It is a FANTASTIC tool and does everything you teach. It's available brand new for ~$1300. it was not quite a year old and still under valid subscription. I paid $900 used on Facebook Marketplace and the guy included a 4 channel scope and another year of updates. It doesn't come with any wiring diagrams or any service info, of course. Maybe you've looked at it but, to me, it fits your cost vs capability requirements.

[@wesleybruce8852]

Looks like a decent scan tool and made in the U.S.A. Hard to find information: Renewal subscription is $750/year. Enhanced subscription is additional $399/year. Or when combining subscriptions; $1,150/year. Zoro is listing tool price as $1,569.61. Other dealers a bit more. Thanks Scanner Danner for the tool intro. Keep these videos coming.

[@billyyoder8171]

Thank you Paul and Caleb. Good job again. Have a blessed and safe week to you and your family.

[@mikechiodetti4482]

Those Jeep in-line 6 cylinder engines were great. My wife had one in her Grand Cherokee. Nice Diagnose of the secondary ign system.

[@Watchyn_Yarwood]

1996 Jeep Cherokee Country special ordered. It was the best, most enjoyable vehicle I've owned.

[@jdtractorman7445]

I'll never forget the Champion spark plug my instructor showed me at the vocational school years ago. It was brand new right out of the box. They forgot to cut the threads into the bottom part of the plug. That kind of makes it hard to screw into the plug port in the head, LOL🤣.

[@jimyep9971]

Man you make getting scan tool hard. Been looking at 906bt now this, like big screen being in my 60's n retired it helps. keep videos coming.

[@jasongrady5035]

Paul,. The Autel MS906BT scan tool can be found for around $1500 full OE with bidirectional tools and some key programming functions. And it has the chrysler 16 pin adapter with other OBD1 adapters.

[@bartscave]

The ms906 (corded version) is $1100. It does everything the expensive Maxisys ones do except programming. The Bt version is nice though

[@Watchyn_Yarwood]

$1299 loaded Amazon Prime

[@forrestkim4828]

I have same scanber ! It's great scanner ........update make it even better !

[@feeneysmechanical6215]

Within the last year. I bought 3 Solus ultra scan tools. Now all used with different levels of software. But all three work great.

[@djosbun]

I'm still looking for my first bi-directional scan tool! I don't do this as my day job so I'm strictly combing the used market (Craigslist, for example). They all seem so overpriced, it's depressing.

[@grabovg]

@@djosbun My first by directional scan tool was the ALLTEL MS906BT it’s around $1500 it’s a really really really good scan tool again due to its price it’s a little slower than some of the higher in models but it pretty much does most everything the higher end models do on the autel line up

[@Jpilgrim30]

Launch x431 pro s mini is a great scan tool for someone looking for an affordable full function scan tool with bidirectional controls. It’s an impressive little tool. You can find them for around $700-$800. The Bosch ADS 525X VCI Is J2534 compliant so you could flash program with it.

[@g20sunny]

Thanks for this awesome video. Very useful info.

[@willispower9493]

Ha! If you're going to do a tune-up and do it right don't forget to change the special screw in the battery terminal. Those wear out and can cause starting problems.

[@andrewwmacfadyen6958]

Long forgotten fact the AC in AC Delco stands for Albert Champion the same guy started both spark plug companies.

[@arielatom03]

Wow i didnt know that. 👌

[@rimmersbryggeri]

I used to prefer the bosh tools to the OEM tools we had at scool from various OE:s. Volvo vida had very good service info though but I used to print that out and then use the bosch for the work.

[@jws3925]

Thanks SD for all the videos. Nice to see an old reliable 4.0. I clicked over to Super Mario and looked thru his videos and searched "plug indexing" but was unable to locate the video you were talking about. Not a professional mechanic but lots of experience and this plug indexing was something I was not familiar with and would like to know more.

[@ScannerDanner]

I put a card in the video for a direct link to it. I'll find it again and put it in my description

[@Inkd_watkins]

I recognized the repair source. I invested in a Mac Scanner and Repair Source was included with it. It is definitely a little weird and missing some stuff. But it works and has done good for me.

[@frugalprepper]

I get Motor Repair Source through Michigan e-library for free, and I get All Data through Ohio Library for free. I like the Mitchell diagrams, but I can get what I need with the free stuff!

[@ocesmekanics3831]

How is it free? I tried looking for those sources and they don't have them... can you provide a website for the specific one you are using?

[@HotRod-wv4vm]

Don’t argue with dad👍

[@williamlee583]

Dad knows

[@nopjack7278]

@ Hot Rod 1949 Exactly! The son sounds like a clueless know-it-all that ended up putting his whole foot in his mouth. Son, just listen to your dad.

[@phatdad9750]

good stuff your channel was recommended by the flat rate master got a sub from me.. a great learning tool for a 40-year-old going through tech..

[@alfedgeanonymous]

Good videos! As for tools the Ms906bt, maxiscope and your book for 1680 is also a good deal. I'm used to the modis edge but the updates are expensive. For a couple hundred more I decided to give autel a try.

[@ralfsautomotive]

I have the ADS625 and use it mainly as a paperweight. Bosch should give me the money back in my opinion. The J-Box takes forever to connect and the tool is also slow. Don't even get me started on the communication range, if I step in the office it is game over! and I have a tiny Shop. I got it brand new and have only used it a handful of times in the 7 months I owned it. My Autel MaxiSys Elite got a great range and lots of functions but I am not a fan of their "Garbage" anymore as everything breaks down although I do not abuse it and keep it in a climate-controlled environment. I cannot get myself to like the x-431 pad 2 either it works but seems sluggish. I hate to admit but most often I find myself using the edge.

[@ScannerDanner]

Great feedback! Thanks for the reply. Last thing I want is to push a tool. Hope someone from Bosch is paying attention and replies.

[@garaza24]

As always excellent video!👍 Launch has a VCI Thinkdiag for 250$, 2years subscription and updates after it 100$ year. Bi-direction testing, ECU coding. Of course need own tab. I was thinking about Autel MP808, but its 750$, Launch with new Samsung tab not more than 370$.

[@masterfastermasterfaster]

Waited sooooooooo long to see Bosch scanner Thanks Paul

[@josephwash109]

It's been some time since I've seen the 4.0L six cylinder, but didn't they have the firing order cast into the intake manifold? I'm very familiar with the inline six firing order myself, since all domestic sixes had the standardized firing order of 1-5-3-6-2-4.

[@Nabeelco]

I actually bought a Verus Pro off of ebay for about 3 grand like 4 years ago. It was TOTALLY worth it.

[@TheCrazy243]

I have verus pro, too. Bought it from eBay. About $2,700. I did not regret it. It’s Freaking worth it!!

[@jasongrady5035]

I did recently find out that the tool in this video the ADS525X uses a wireless VCI that is also J2534 compliant for programming

[@northernpatriot9078]

whoa that ADS 525X looks like that might be my starter scanner i like the built in mitchell feature thats a good value i imagine it reads fuel trims and has some bidirectional control i am watching this on my NAPA lunch break .....Hi paul i still need to take advantage of that AES gift certificate i got i still have code too i will use it soon im gonna get the probe kit thank you !!

[@nigelclark7360]

Good video Real good stuff When the air gap contacts get corroded through Time and use quite a lot of HT power is lost could be up to 6 KV normally with a Sound system about 3 KV Is lost, then plug lead with age deteriorate, more lose In HT currant. Seeing the state of the.plugs it's a wonder, that the Jeep started, might be a diff story if the temp was minus 20. I have found through the years and l am 96 now, that Badly corroded dis cap Contacts will give a lot of reduced performance, on engine rpm under load, Flat spot also on accel ration and also contributes to bad starting. Back in the 60s. it was quite common for dis caps to crack and also HT, tracking Inside the cap, they were, made out of Bakerlite a poor type.of plastic, it was Cheap to make. Even some car dash boards Were made out of the stuff, And when it aged the plastic used to crack with temp Change. Some people in days.gone past would carry a spare cap in the trunk, and other things in case of breakdown. Other wise it's a long walk back to Cairo.

[@V_Vladimir_V]

Ух ты, только сегодня про Аутел Ультра смотрел)

[@chrishouser3896]

The $400 dollar per year is worth the diagrams alone. Even if I don't use the tool for diagnostics.

[@sellingthewind]

such a good video. I knew you were a rockstar. We even learn about drum timing with you dude!

[@killer2600]

Drum timing is important when performing percussive maintenance.

[@jorgeboyas2255]

Hey! Long time fan and ASE tech! Say no more... "Android" I will not even think about buying! "You get what you pay for"

[@SmittySmithsonite]

Great outtakes! Sounded exactly like me working on the transmission removal in my 103k mile Silverado. 🤣 Wow, those plugs were smoked!! Worst I've seen was a Sable 3.0 V6 - measured .100" gap!! HAHAHA! Great stuff fellas.

[@JoesAutoElectric]

Nice demo brother. Curious of your thoughts on the pico 7 software. I only tried it once so far.

[@ScannerDanner]

As with any new software, it just takes time to get used to it right?

[@TheRallyCoop]

Dinner, love your videos. If indexing and factory plugs are critical I don’t understand why you didn’t use a torque wrench on the plugs? Perhaps it’s because it’s not a GDI engine?Thanks again.

[@djwilson48625]

Can someoe with the Autel MS906 PRO TS compare it as to which you think is the better tool to buy?

[@mototechno834]

hey Paul.. could you please advise me on buying an oscilloscope...will a 50mhz picoscope be enough to see waveforms for crank and cam sensors, ignition coils and injectors???

[@robertcheruiyot1006]

Hi Dan, Thanks for introducing us to the new scan tool. It looks 👌 as far as my pocket is concerned. My question is that in the packing list of bosch there's a lab scope in it or you would buy separately? Other questions is technical.Can you clarify or state more about primary and secondary of the coil?

[@mostlymoparih5682]

Good video Professor. Looks nice and warm in Pa. Champs are okay as long as they are the cheapest. I have copper NGK's in my van which calls for Champs. briansmobile1 uses what he calls BFATE bonus footage at the end. Good BFATE. Your biggest fan. You very funny Dr Jones. Praying for our nation. Guys have a great day.

[@ScannerDanner]

It was! This was late summer when we filmed

[@dtnel]

Haven't seen you use the IM-608 yet Paul? Seen the Snap-On ones, the Autel Elite and some others.

[@isalmankhan1]

Loved it SD👍 Honestly your reviews on automotive testing equipment, are as educational as case studies👍 SD what are your thoughts on the performance of IM608 so far (as a versatile tool) Stay Safe Bro❤

[@ScannerDanner]

Since I've gotten the Ultra, I dont use the IM608. 😉 If i did key programming, the IM608 would be the one.

[@SuperMarioDiagnostics]

Great diag Paul! This video is really making me give a good look at the 4225a, the convenience is pretty awesome! Btw thank you for the shout out! That was a lot of fun! 😆😆

[@KBLIZZ333]

Thank you so much 🙏 I've been looking for something affordable that's a tablet style for accessing the web and service info to replace my shitty Solus Edge. That and the wireless VCI I think I'm sold on this little bad boy !! Very much appreciated 🙏 👍

[@dannywilsher4165]

Mr.SD, I have a 2000 Vette that will not rev over 2500 rpm. New PPS, new TPS. Is this a common problem with these old machines?

[@nigelclark7360]

Looks like you have a good ign coil on the Jeep .

[@nm-qt2hb]

Are trying to say that Champion spark plugs only last 130,000 miles? On a stock engine, I only use stock OEM plugs.

[@gbcremont]

Интересно!

[@georgebonney90]

I got the launch X431 V for 800$ 2year free updates from king bolen, its a nice scan tool

[@jesselyons2002]

Yeah got one too. Launch should send SD a scan tool.

[@ScannerDanner]

Launch sent me a $400 unit (I forget which one) and it was absolute garbage. Haven't looked that way since. Maybe because it was a bottom of the line unit? No Bidirectional controls, slow as molasses and full of glitches.

[@cristianojoana1898]

Try launch pro mini or diagun will blow your mind...

[@mikesabin8568]

Bi directional capabilities, tons of data, some programming capabilities, go with launch x431 pro mini. $900 bucks

[@sinegra30]

Yes, you're right, the Mini is actually $600 the $900 version is the big (Launch X431 V+) one even better than the Verus since it includes 12 and 24 volts Dongle and trucks diagnostic software

[@samcripes3046]

Yes sir! Have one and LOVE IT! Can do some things other more expensive ones can't! Perfect tool for the price!

[@orfeous]

Yep.. :)

[@rudimaier3679]

Good to know, thanks. The software is the same as on the diagun v? I have seen the diagun in some videos and the bi directional is extansive on this.

[@garaza24]

There is x431 Thinkdiag BT plug, same functionality as large X431 scanners., but costs 250$ with 2 year updates. Only need buy tab, but it’s 150$.

[@donaldisrael7147]

diagun pretty amazing costwise.

[@frugalprepper]

Heck yeah!

[@RonP0310]

Amazing and only 600 n change on amazon

[@pl5882]

Yep

[@filicruz7566]

Hi there, hey it's always a pleasure to sit down and watch one of your videos they're so good 👍 thanks for sharing it thanks for no been selfish. i will be getting ur premium videos sooner like this week i don't have any or better saying nothing not even a piece of knowledge nevertheless,I really think I will get a lot of it from you thanks 🙏 again.,and but the way beautiful explained.

[@ScannerDanner]

My students have nothing when they come into my class too. Start by watching my introduction and navigation video and have at it! I have everything you need to build a great foundation on. I look forward to hearing from you!. Thank you. www.scannerdanner.com/join-scannerdanner-premium.html

[@Jackie_Ewehere]

20:58 "I've done this before, it's just like playing the drums" Hey Lars, you listening?

[@wmwil2564]

Can you type in the search bar to pull up the circuit to be tested

[@markferraro5250]

nice job SD thanks so much nice scanner bosch

[@BSDKllr]

96 was a split year change. There is some parts on the 96 that only exist on the 96.

[@ScannerDanner]

Yes sir, exactly. Thank you

[@filicruz7566]

What would you recommend between snapon and bosch that one you are using in your video?.I will really appreciate ur opinion thanks man.

[@ScannerDanner]

This wasn't about which one, this was about cost. Of course I prefer my Snap-On Verus Edge but thats a scope and scan tool combo and is way more expensive

[@rsanchez5676]

I got my autel maxidas thst does bidirectional, key programming, key fobs, active tests , everything but a scope but I have a 2204a pico scope.

[@terrybarkman3219]

Question for you Paul, does bosch have DLC adapters for different vehicle manufactures? ex. older bmw 20 pin round connecter

[@ScannerDanner]

Not sure my friend

[@kylew657]

Scannerdanner, what’s a good entry level lab scope? Looking to ditch my meter and move to a scope. I work on HD diesels, so needing a scan tool is not necessary.

[@thelostshadowofhanzo]

I have a Pico 2204a. For the price it is a very good scope and does everything i could ask for. It is my first ocillioscope i have bought myself (i have experience with Pico in the shop). Look it up i got mine for £99.00, i had to buy a few other accessories like longer leads and a couple 20x atinuators but they were only cheap to get.

[@ScannerDanner]

The uScope from my friends at AESwave. It is a single channel pocket scope and the master kit, that comes with an amp probe, ignition adapters and a test lead runs about $400 www.aeswave.com/scannerdanner-c512/

[@jamesabbott8208]

Saw this scanner on aes wave for $100 less than amazon. Is there a reason its not on your aes wave tool page?🤔

[@ScannerDanner]

If you use this link, I think anything you buy i get credit for even if it's not listed on my page? Not sure. www.aeswave.com/scannerdanner-c512/

[@Pablo_Automotive]

The ADS is a fantastic tool thanks for share this ☺👌💗🔧

[@chriswilson3484]

Autel makes the mk906bt for 1300 with bi directional control and can get a 4 channel scope attachment for 400.

[@robertferrara4529]

I've followed you and bought your book. don't lie to us. I own a Thinkcar scanner that's bidirectional for under 200.00.

[@ScannerDanner]

Why would I lie to you? I'm certainly not all knowing, and spend little time researching the vast amounts of scan tools out there. This was sent to me and I liked it.

[@robertlesaca3964]

What about theLaunch x431 PADIII? It claims it has a bi-directional...

[@robertmobileman8304]

Good video SD , is say diagun v from kingbolen good value for money and after sales help is good too, less than £600 , not sure what that is in dollars , but I think it's great for the money, so worth passing this info on I think .... anyway thanks again Rob mobile man

[@gouveiaclassicos]

I seen those plugs clean and gap and put back on the engine and doing another 50.000 lol

[@ekbadturk]

Hi Paul, I follow you a quite a bit, and I recently took a ASE test for electrical, there was a question that stuck in my head and I was wondering if you could help. the question was mechanic a says The Wider The Wire is ,the better it is, B says the longer the wire the better it is. That is pretty much word to word I did go with A ,what's your . thought. I would like to know or is there any videos that you have posted related to the subject?. thank you

[@ScannerDanner]

What a dumb question. Lol Just remember that the longer the wire is, the more resistance it will have, and the "wider" the wire is, the less resistance it will have due to having more copper conductors. As far as the term "better" goes, that is subjective right? If I need to run a fuel pump that is 7 ft away and I have a choice between a fat 3 ft wire and a thinner 7 ft wire, what am I picking 😆

[@손정민-v8k]

Awesome outstanding job have a great time thanks

[@donaldisrael7147]

I used to set my scope on raster.

[@mikejmardis]

Launch diagun iv. $400. Best Buy directional, programming tool out there for the price. Will do stuff my verus with all the updates can’t do.

[@ScannerDanner]

I've used a Launch scan tool that was complete crap. One in the $400 range you mention (I have to find the model). Never used the model you're mentioning maybe? Had Launch send me two of them. The first one I actually did a video on it and it was so slow and had so many issues, that I just sent them the raw unedited video and never produced it. It was that bad. Then 6 months later they sent me another unit (same one) with updates and were really excited about it and it was garbage too. Haven't looked at Launch since.

[@mikejmardis]

@@ScannerDanner what time frame was that.

[@dmenke]

I knew that was your son in the first 30 sec... :)

[@markorlando4817]

Is that a screw in the battery terminal?

[@ScannerDanner]

🤣 heck yes it is

[@joerangel611]

Dad and son arguing That’s life

[@Flowtester1]

You could have a giveaway for that tool.

[@davidfleckenstein6359]

Would like to see you do some diagnostic with the blue driver

[@ScannerDanner]

I have 1 or 2 videos where I used it. You just won't see me using these minimum function scan tools much. I'm sorry

[@davidfleckenstein6359]

Love the channel only work on my own vehicles I have learned a bunch watching the videos 1500 dollar scan tools are still a little pricey for me but I definitely understand the blue driver being a minimum scan tool

[@davidfleckenstein6359]

Thank you for replying to my comment

[@ScannerDanner]

@@davidfleckenstein6359 the key when you watch me troubleshoot these cars, is to learn the techniques I'm showing, and then modify the tests to fit the equipment you have. For example. You won't have Bidirectional controls with the bluedriver but if you understand the output circuit being tested, you'll understand that you just simply need to meet the conditions for the computer to turn that circuit on. You won't have a way to force it like I do, but it can still be done, using the same techniques with your voltmeter or test light. Hope that makes sense. You'll just need to work a little harder 😉

[@markchidester6239]

If a spark plugs lasts 100k, how could you not replace it with the same thing. Definitely a no brainier for me!

[@Rubould]

Got it backwards. Bosch makes those diagrams and licenses to Mitchell and Motor. Motor then re licenses them all over the place including Identifix and Motologic. I've complained about inaccuracies in those diagrams and was told Bosch does them and there is nothing they can do about it.

[@ronaldlarue1107]

Did Ivan inspire the ground on battery modification..... Shoe makers kids shoes lol

[@padraiggalvin2807]

Sorry but What exactly do you mean by bi-directional scan tool?? Thanks for the review of the bosch tool. you gave a honest opinion. Not a great looking tool

[@ralfkramden9291]

Wonder if you had clicked on the next spark tower if it would have shown you which cylinder it was for

[@ScannerDanner]

What time frame my friend?

[@ralfkramden9291]

@@ScannerDanner 25:20. when you start looking at the firing order and it seems to show only the cylinder layout. I was curious if you clicked on the next tower if it would have shown the next correct cylinder in the order.

[@ScannerDanner]

@@ralfkramden9291 I don't see a "next tower" I'm sorry

[@ralfkramden9291]

@@ScannerDanner I guess I wasn't clear in what I was asking. I meant if you touched/clicked on the "spark" tower in the image, would it have shown the correct next firing cylinder (i.e. the next one clockwise from the #1 cylinder )

[@Russell_Duncan]

Biggest fan! 🤣🤣

[@muresanioan7130]

thanks

[@shakeelsss]

still waiting on that waveforms seminar sir.

[@ScannerDanner]

The seminar has been changed due to Covid. An official announcement is coming this month to let you guys know the date and subject matter. I'm going to be hosting the class myself now and it will not be on psi transducers

[@shakeelsss]

@@ScannerDanner wonderful. i am looking forward to meet the G.O.A.T. I also need help with schematics but that is another topic. I don't know if you do individual session , if that is the case i can meet you at your brother' shop . I have the desire to make myself valuable but i need your help.

[@JOHNPHUFNAGEL]

I cant believe nobody has said this, since you know the direction the rotor turns you could have just followed the wires on the cap to figure out the firing order.. No need for google Lol

[@richardcranium5839]

that's if the last guy had them right lol. been there done that

[@TheCrazy243]

No caption?☹️. Good thing you speak slow I can understand you but still great video. Now I want Bosch scan tool !!!!

[@markchidester6239]

I agree. My hearing is really bad and I never had a hard time understanding what Paul said.

[@ScannerDanner]

I believe the captions are automatically done on every video. Maybe when it is first processed they are not there? Can you check for me now?

[@TheCrazy243]

@@ScannerDanner yay! I can see it now!! I’m going to watch it again 😀! Thank you!

[@ScannerDanner]

@@TheCrazy243 okay sweet! So keep that in mind. If you ever see no captions on a new video, give it some time and it will be there. Thanks again!

[@rsanchez5676]

My maxidas was around $800

[@mikejmardis]

Code assist should be code setting criteria

[@brentowen9480]

When you tell the customer we didn't replace the rotor because it didn't fit, but it didn't need it.

[@ScannerDanner]

It's a $2 part 😉

[@TonyRule]

26:16 They've simply forgotten to add the firing order data.

[@billyyoder8171]

Launch X431 Diagun V $670. Launch X431 Pro V kit $870 2 years free updates and 5 years warranty. Kingbolen distributor on Amazon. Much better deal.

[@ScannerDanner]

Last Launch tool I used was garbage. Guess I need to see one of these models

[@StromboliKicks]

we live in a world of subscriptions.

[@miguelsenriquez4288]

This cool bro

[@northernpatriot9078]

wow one of those old nine volt systems i forget why they went to five

[@williamGSXR110]

The system voltage with a weak battery can drop below 9 volts easily while cranking, causing all 9-volt sensors to stop functioning. If the system drops below 5 volts during cranking it ain't starting anyway.

[@northernpatriot9078]

@@williamGSXR110 im sorry i meant those old 9 volt reference lines

[@ScannerDanner]

Just the cam, crank and OSS were 9v. The rest is 5v

[@williamGSXR110]

@@ScannerDanner was I correct with my statement as to why we don’t use 9 volt reference?

[@ScannerDanner]

@@williamGSXR110 yes sir! Exactly why it was changed in my opinion

[@chadgardee1496]

Launch

[@johnburrows7938]

Let’s start by arguing how long the misfire has been happening....

[@МаратХафизов-й7л]

Good

[@2001BornAgain]

Bosch just lost a ton of money! They got some work to do.

[@mikejmardis]

Directhit is identifix