Bosch Dishwasher Fix (workaround) - Stops barely into the wash cycle - and says all clean!

I found a "fix" or workaround for our Bosch dishwasher that runs for a couple of minutes and then says the dishes are clean although the dishes are dry and dirty as ever. Be sure to subscribe to Morgan Madness: goo.gl/7CGX0T
A shout out to Hotrodchevy56 who tipped me onto figuring out this work around on his video "Bosch dishwasher runs 5 mins then says clean. I found a work around!." ( • Bosch dishwasher runs ... ). My workaround is slightly different from his.
I hope this helps you, whether it's my version or his, it's nice to hear that water running in the dishwasher again with out paying for a new one!
***************************
Be sure to subscribe to Morgan Madness: goo.gl/7CGX0T
I'm Jon Morgan and I like to make videos with my family and friends. We like to have fun and enjoy life. I make a variety of videos, that's why I call it Morgan Madness.
Here's a list of the main types of videos that we create:

Family Fun, Roller Coasters, and Theme Parks,
Outdoor projects (like burying our trampoline in the backyard),
How-to and fix-it videos,
Experiments and Challenges,
Quadcopters and Rockets,
Campfire cooking, and Yummy food!
That's not to say that I won't post videos on other random things. I post videos most every week... so watch a few, and if you like them, please subscribe and share them with your friends! Let me know which ones you like the most and I'll make more like them.
Welcome the Madness!
FTC Disclaimer: This is not a sponsored video.

[@taniagrant5434]

Thank you! We have the exact same problem with our Bosch, and we’ve gone through the exact same series of workarounds. Tonight was the night we tried switching the cycles and restarting the dishwasher 15, 20, 25 times, to no avail. So I went online and came across your video and your solution seems to be working! Hopefully this will buy us at least a few more months of clean dishes. I’d rather not have to do kitchen renos, even minor ones, during the pandemic. Fingers crossed. Thank you for your video. 😊

[@JonMorganMadness]

You're welcome! So glad you found the video and that it works for you. Ours is still working 8 months later. Thanks for the comment. :)

[@leslieprior1786]

Just worked for me, too!!! Yeah!!

[@KarlH1980]

@@JonMorganMadness Worked for us as well. Thanks!!

[@nikki0604]

Went without a dishwasher for several weeks waiting for a turbidity sensor, replaced that with no luck. Did this workaround and instantly got a full cycle. Thank you so much!

[@JonMorganMadness]

I'm glad it helped. Thanks for the comment!

[@joshuaadams7438]

I have a funny story. I usually do a load of dishes every day, so I use my machine a lot! I had the same problem with my Bosch (same model as yours). I found your video about a year and a half ago, and the workaround was perfect! I was so pleased to not have to take apart the whole thing or call a repairperson. So I've been using the workaround for about eighteen months. Well, about two weeks ago, the dishwasher began working CORRECTLY! I've done at least twenty loads, and I totally don't need to use the workaround. Crazy, eh?

[@JonMorganMadness]

That is funny. Maybe I should see if mine works now! I'm still using the workaround all these years, but it's still working!

[@Nick-fi1mc]

Lol that's wild! 😹

[@joshuaadams7438]

@@JonMorganMadness Now it's anyone's guess. Sometimes it works and sometimes it doesn't. You know it's working if it doesn't start that second "grinding" sound.

[@JonMorganMadness]

@@joshuaadams7438 bummer, but does the workaround still work for you?

[@joshuaadams7438]

@@JonMorganMadness Yes! It still works like a charm! I've gotten so used to it that when it works I get thrown off.

[@rosannekalabric8657]

Thank you so much! Ours has been finicky for years. It usually required multiple attempts to start and eventually it would work. This past week though it didn't matter how many times I tried - it never worked. I found your video this morning and your workaround WORKED PERFECTLY!!!! Thanks so much!!!!

[@JonMorganMadness]

So glad it worked for you! Thanks for the comment.

[@scottmauchin1116]

Thanks, dude! This dishwasher has been driving us crazy for the past few months. We would have to restart a half dozen times or more to get it to run a cycle. Just tried your work around and it worked the very first time. Full confession, our Bosch is 11 years old, but I just hate the thought of forking out $800 or more for a new one when this one does work (albeit a bit stubborn). Appreciate your video and the money you saved us!

[@JonMorganMadness]

Glad it helped you! Ours is about 18 years old or so and still running! Been using that work around since I made the video and a bit more. Thanks for the comment.

[@Mark-ss1ke]

Same problem, I Have an older model Bosch #SHE3ARSXUC. I changed the inlet valve with a OEM part "40$". I found by vacuuming the drain area below filter basket and drain hose it started working all the lines have been disconnected and cleaned out. ( Still defaults to clean) ..I am going to change the float switch next and see what happens. Perhaps this is the issue? Perhaps there is a weak signal telling the inlet valve to open and start the filling process? a faulty float switch? .. I'm baffled why it works after the drain line is completely cleared but unfortunately I can't figure out what the root cause is. I can fix most things and I will not give up. My Wife is starting to look at new dishwashers at 1000,$ so therefore I'm under a lot of pressure to get this problem solved🤣🤑

[@MaudeFerguson]

God bless you , Sears Warrantee replaced every part and our unit was unreliable for 4 months . We had 6 repair visits. worked sometimes. ! Now I don't have to jump off a bridge!!

[@JonMorganMadness]

I'm glad it helped! Thanks for the comment.

[@DanielShawCosman]

It WORKS!!!! My model is over 10 years old, and for me, I didn't have to wait until it starts the second 'attempt', but simply open and close it during the silence after the first 'attempt' is over. The water immediately started rushing into the unit and it started up shortly after. Thanks a million!!!

[@JonMorganMadness]

That's awesome. So glad it works for you! Thanks for the comment.

[@DaveInPDX]

POSSIBLE FIX ! READ ON! - I discovered this work around and used it for years on my Bosch. I loved my Bosch so was willing to do it. But my OCD kicked in this last month and I decided I'd fix it or get rid of it. I'm pretty mechanically inclined so took DW out, tipped it over and checked everything. At first all looked good. I noticed that the circ pump was the last thing that ran before the unit stopped and showed the clean light. My particular unit does not have a digital readout, but I had recently read about someone that was getting and E24 and E25 on their units with displays and the fix was the circulation/heat pump. I guess the dishwasher does a power on self test and if the circ/heat pump pulls too much of a load (amps), it assumes it's bad and throws the error. On units without display, the code is the clean light after a couple minutes. I decided to take my pump off and opened it up and noticed that the bearings and shaft were pretty worn and didn't turn very well. It was "wobbly". A new circ/heat pump costs $200 which is pretty expensive but less than a new DW. But I decided to take the risk and found used on on ebay for $50. I just installed it today and guess what? IT TOTALLY FIXED THE PROBLEM. It sounds better when it washes now. I am guessing that because these are heat pumps and pump a lot of very hot water, the part is wearing out quickly. I'm not sure if this will help anyone, but thought I'd put it out there. I'm gong to spread the news because there are a lot of people that are experiencing this issue and perhaps this is the fix for the majority of them.

[@JonMorganMadness]

Thanks for sharing this!

[@pamelameyers6518]

I would have to hire you to do this. Glad you posted too!❤

[@karleshaford682]

It's not an easy fix, but your analysis based on my own experience is spot on. In my case, I ended up just buying a cheaper Whirlpool dishwasher. But after seeing how cheaply built it is, I regret not biting the bullet and replacing the circulation pump on my Thermador (same as Bosch).

[@PMitchell106]

I watched a couple of videos on circulation pump replacement from Repair Clinic and Appliance Parts Pros. Are those the same procedures you used? seems like a very involved job.

[@AbqMichaelMcDonald]

That's an amazing diagnosis. I'm sure it's worth $50. Not sure about $200 for mine. My machine is over 10 years old now and a new Bosch is between $550 and $1,000 depending on the model. I just replaced a door seal and I'm imagining that other things will start failing soon. So what your excellent analysis tells me is to start watching for a sale on Bosch dishwashers.

[@robmurray6430]

I have a sightly different model bosch but this work around worked! Gives me some time to figure out what is going on. Thanks for posting!

[@JonMorganMadness]

I'm glad it worked for you. Thanks for the comment!

[@suevanhook5317]

My Bosch dishwasher is older than any I've seen on You Tube, and this worked! Thank you!

[@JonMorganMadness]

So glad it worked, thanks for the comment!

[@ajussiwannabe]

This workaround didn't work for me so I hired a repairman. The first guy was stumped but the second guy I hired diagnosed the problem within 15 minutes. My Bosch dishwasher was NOT filling the bottom of the washer with water quickly enough and the central board decided to shut down the cycle. Apparently, my Bosch dishwasher's original inlet valve was failing and not pumping enough water to start the wash cycle. This, according to my repairman, is a common problem with Bosch and he normally keep a few different models of Bosch inlet valve in his repair truck. My Bosch, however, was built in Germany and was not easy to find a replacement inlet valve, but my repairman managed to find one through his friend who also services Bosch. The actual replacement of the inlet valve is fairly simple and only require simple tools, and there are instruction videos on KZbin. If anyone finds their Bosch dishwasher is not filling enough water, then they should suspect the inlet valve.

[@JonMorganMadness]

Thank you for posting this! I'll have to see if this is the problem with mine.

[@patrivers8366]

Just tried this after a frustrating few days. Worked perfectly. Thanks for taking the time to help out.

[@JonMorganMadness]

Glad it worked for you! Thanks for the comment.

[@mrred27]

OMG THANK YOU! I tried to reset it and was losing my mind. Then I tried to just open and close it as you did and it WORKED!

[@JonMorganMadness]

You're welcome, so glad it worked for you. Thanks for the comment 👍

[@mmorissetti]

had done all the other thngs too before searching for help. This worked! Thanks so much.

[@JonMorganMadness]

I'm glad it helped! Thanks for the comment.

[@lindaseverin8242]

I have an 800 series Bosch thats over 10 years. it started doing this about 6 years ago. I searched for a fix and found after the 3rd cycle to open the door and push the start button twice. works but it sure is a pain. I had read it was a motherboard issue but could never find a replacement.

[@Keyser1975Soze]

Just opening and closing the door on the 3rd starup cycle works on my SHE4AP05UC I think this might be caused by a bad float switch (water overflow protection, starts up drain pump eventhough there's no water in the bottom of dishwasher) or bad control board.

[@Mike-dt3rv]

Exact issue cropped up in my 9 year old Bosch. Same model as in utube presentation. Used the workaround and worked the first time! Amazing! Thank you

[@JonMorganMadness]

You're welcome! I'm glad it worked for you. Thanks for the comment

[@laddorcho]

I have had the same problem for years. Still working just needs to play with it all the time

[@trilogy9210]

My bosch is doing the same think I tried this trick and it worked.Thanks 👍

[@JonMorganMadness]

You're welcome. I'm glad it helped. Thanks for the comment.

[@SteveCooper-o3k]

Had this exact problem and saw the comments about this being an inlet valve problem. Other KZbin videos show how to replace the inlet valve but nowhere mentions the Biltron Type 88 Inlet valve that is integrated into the the inlet water pipe. If you have one of these is is most likely the cause of this problem. It was in my case.

[@CasaDeGomez]

I just watched a video and immediately went downstairs to test it out, you are the man!!!!!!!!

[@JonMorganMadness]

That's awesome that it worked for you as well!

[@chrisdunn2353]

so awesome - it worked great - i was cleaning everything out and still nothing - thank u so much

[@JonMorganMadness]

You're welcome! Glad it worked for you. Thanks for the comment.

[@johnparson7860]

Thanks so much for your video. I tried it once and so far it worked. I wonder though, what the real problem is, and what it would cost for a permanent solution. And, could an average homeowner do it him, or herself. Has anyone contacted Bosch? My washer is an older model, but with the same problem. Seems like it might be some sort of widespread issue with Bosch.

[@JonMorganMadness]

You're welcome! Thanks for the comment. I too have wondered what the real problem is. If you have time to sift through the comments for this video, there are a few people that have found actual fixes, but they aren't all the same. I have read them, but haven't had time to try them all out to see which ones might solve the problem for me. If I ever do find an actual fix for mine I'll be sure to make a video about it.

[@solver5k]

I have a different Bosch model but this worked for me today. Thank you so much!

[@JonMorganMadness]

Glad it worked for you! Thanks for the comment

[@acmeschilling6734]

Kevin Spacey Knows how to fix Dishwashers!!!

[@el_m_ghoul]

Dude, you are a saint. Thank you, worked for me on the different Bosch model.

[@JonMorganMadness]

Glad it worked for you! Thanks for the comment.

[@rubyjustice8014]

YAY! It worked. Thank you for your suggestion which will buy us a few more uses.

[@JonMorganMadness]

Awesome! It's given us 2 more years and counting!

[@katheckenbach9054]

Thank you so much for posting this! I found your video a couple of months ago and have been using this workaround ever since and it's worked every time.

[@JonMorganMadness]

You're welcome! I'm glad it works for you. Thanks for the comment!

[@largelew9999]

Saved me from the nightly bout of cursing greedy companies' planned obselescence. Thanks!!!

[@JonMorganMadness]

You're welcome! Glad the video helped you. Thanks for the comment.

[@twsd]

The words “planned obsolescence” just came out of my mouth too.

[@johnpace4985]

Thanks Morgan, your work around solved my issue.

[@hallemac4290]

Brilliant !! Worked perfectly on my 11 (eleven) year old Bosch !! Thanks !!

[@JonMorganMadness]

Awesome! Amazing it worked on a Bosch that old. Thanks for the comment.

[@Starsmb1492]

Thank you so much for posting this! I found your video and have been using this workaround ever since and it's worked every time.

[@JonMorganMadness]

That's awesome! So glad it's working for you. Thanks for the comment.

[@angiesome]

Here IS The ACTUAL REASON and LASTING FIX: The problem is that there is a clog or partial obstruction "somewhere" . The issue is finding the clog. (Wait you say...I cleaned out the filter, pump cover, pump impeller...etc. then I cleaned out the drain hose ...100% checked and no clog). Maybe...Well....so did I. I shop vacuumed hose and sump and it and blew it out with a compressor...Dishwasher and Drain hose verified...Clean as a whistle. But..I experienced all the trouble and inconsistent pumping/Washing/Pumping?"Clean" Light behavior that others did. Cleaning out the filter and then resetting by shutting off the breaker for a few minutes usually works. Also the work around like this KZbin may work many times (Thanks Morgan). But eventually this is not working. My filter was clean from a few weeks back.... so when it showed up again I was perplexed. Also, The clog can be partial and just causing some back pressure to trigger the stop and clean light. Then you think all is clean....AND my sink runs good so the drain & trap must be clear...right? . Here is the more nefarious issue that is similar to people with disposal units. I pulled the hose off of the Y again...That Y joint is the last point in the path that was untested...I gently put a screwdriver in there and felt a little resistance...then pushed a little harder and POP.... a little clog in the Y adapter fell down into the trap! Voila!. I have a low Y connector where the hose connects just above the trap. The clog can get pushed out a bit and with a little siphoning or the trap backing up a bit that crud can get pushed or sucked back into the Y.... causing the problem to seem fixed and then come back. Even though the hose itself is not clogged (Ensuring a high loop on the drain hose ...or installing and Air Gap mechanism...helps this issue a bit). The point is that when the pump keeps cycling on and off and water is sitting in the bottom with and early stop ...and the "clean" light on....the path to and from the pump is blocked or partially blocked. Go from one end to the next and make 100% sure it is ALL clear. If the pump has back pressure or a clog it will try a few times and then trigger a stop and clean light!. That is it.

[@JonMorganMadness]

Thanks for the detailed explanation. I'll have to give this a try!

[@ryanandandrealoeppky2631]

I agree with this comment completely!!! I un clipped the hose to where it connects to the sink drain and it was packed full of crud. Totally fixed!

[@robballard6006]

You’re the goat

[@FYD777]

Hey thanks for the detail information. I’m gonna check all the draining tube to ensure there is no clog.

[@FYD777]

Share something i did: 1 turned off and on circuit breaker 2 deep cleaned filter till clearly see the pump motor inside the dishwasher. 3 disassembled the pump motor from bottom of the dishwasher to check if there was something stuck on 4 cleaned the door’s seal part of two layers where you can see dirt or white detergent powder. 5(didn’t do yet, but can be next step)checked and cleaned all tubes to see if they were clogged. My dishwasher’s sanitize light flashing/ blinking. That means the water is not hot enough or the door is not sealed or closed properly. i think if the tube is clogged and motor cannot pump the water completely, so the water is still in the bottom inside the dishwasher, which is leading to the inside temperature does not reach to 49 ‘C degrees and that is why the sanitize light is blink telling the hot water temperature is not hot enough.

[@zoobarb]

Thank you. This does seem to be working. Would like to know what the actual fix is, but this is a reasonable stop gap.

[@JonMorganMadness]

You're welcome, I agree, I'd like to know the actual fix. I think it might vary from dishwasher to dishwasher. I say that because people have posted different solutions for this problem in the comments here.

[@lordthanoss]

wow great hack! spent so much time figuring out whats wrong. Thanks so much

[@JonMorganMadness]

You're welcome, thanks for the comment!

[@melissashattuck5115]

Thankyou so much for this !!😃

[@JonMorganMadness]

Sure thing, I"m glad it helped! Thanks for the comment.

[@agentkillers]

OMFG! Thanks man. I’ve been pulling my hair out trying to sort this stupid dishwasher out! You’re awesome. The other guy’s did t work for me either

[@JonMorganMadness]

You're welcome! Glad it worked for you :)

[@minah5032]

This is awesome! Thank you for posting this. I just tried it and it worked great! Does anyone know why the issue happens in the first place?

[@JonMorganMadness]

Thanks, I'm glad the video helped you. There are a few different theories in the comments of the video. I think it might not always be the same thing, since people have posted different ways to actually fix the issue. I haven't tried any yet since this work around is still working for me.

[@Mark-ss1ke]

Door switch being replaced ? It gets a lot of wear and tear + exposed to the heat. I changed float switch and inlet water switch and the water coming in and going out has improved. Root cause not established but work around is a brilliant find.

[@neilbrown8325]

After trying 3 other fix you tubes this one worked! Thank you!! Where can I subscribe to you DIY videos. 😃

[@JonMorganMadness]

Awesome, I'm glad it worked for you. People seem to like my fix it videos, so I guess I'll make more of them!

[@priscillafriesen2722]

Thank you thank you! I had 4 days of dishes piled up hoping it would start working! Watched your video and did the same thing and it worked!!!

[@JonMorganMadness]

That's awesome! Thanks for the comment

[@MrNov1956]

Awesome hack Tom. Thanks.

[@JonMorganMadness]

You're welcome!

[@pamelameyers6518]

Thank you so much. It worked! Keep posting. ❤

[@JonMorganMadness]

So glad it worked for you! Thanks for the comment

[@christophersikorski3606]

I have the exact same dishwasher, mine was doing the exact same problem, This did not work for me so I decide to try and fix it. What I found was under the dishwasher there is a safety float switch with a plastic housing around it. For some reason dirt got built up under the safety float switch, cleaned the housing so now the float switch is not pushed in. Working perfectly now. I wish I took pics and a video but I didn’t. Hopefully this helps,

[@JonMorganMadness]

Thanks for sharing! If mine stops working with my workaround I'll try what you did here and see if it helps. :)

[@andrewpalatinus1308]

Was it the actual switch you cleaned out the housing or the red float part? Planning to try this sometime this weekend. And thanks

[@caprice6825]

@@andrewpalatinus1308 did you figure it out?

[@traceygould4555]

Ridiculous that this works, but so glad it does...thank you

[@JonMorganMadness]

Totally weird right? Thanks for the comment. :)

[@onewayticket3431]

It's working, thank you

[@JonMorganMadness]

So glad it worked for you! Thanks for the comment.

[@WendyMalfoy]

OMMMMFGG!!!!!! IT'S BEEEN DAYYYYS IM TRYING TO GET IT WORKS 🙏🙏 you're high in my freaking list of people I love right now 🤣😅 I started to have problem but usually it started after 2-3 times but lately it has been a pain in the a$$ wow THANK YOUUUUUU!!!! 😘😘

[@JonMorganMadness]

You're welcome! So glad it worked for you too! Thanks for the comment!

[@taharlaaroussi7875]

Thank you so much, we had txactly the same issue, and your workarround worked like a charm!

[@JonMorganMadness]

Glad it helped you! Thanks for the comment!

[@militarymom8967]

Thank you so much that worked

[@JonMorganMadness]

So glad it helped you, thanks for the comment!

[@chrisa4935]

Dude, I can't believe that worked - but it did! Thanks so much for the video.

[@JonMorganMadness]

You're welcome! So glad it worked for you. Thanks for the comment

[@Nick-fi1mc]

Holy cow it worked!!!! Lol 🤣🤣🤣🤣 thank you so much! I was worried I'd have to buy a new dishwasher! Money that I don't have in the Biden economy!

[@JonMorganMadness]

So glad it worked for you! Thanks for the comment.

[@jeromedavis8575]

I have a Kenmore version of this dishwasher. It does a great job cleaning. What do the pumps look like? Are they vertical or horizontal?

[@jamiejackson1716]

Just tried it. It worked like a charm! Thank You.

[@JonMorganMadness]

That's awesome! So glad it worked for you. Thanks for the comment!

[@MiaSanOK]

For me, after initiating a program cycle, and once the second pump cycle begins, I open and close the dishwasher door quickly - without the need to turn the dishwasher off and on - and the selected cycle runs through as normal. I have had this problem for some time, too. Sadly, I can no longer use the delayed timer function. However, on occasion - as a treat - the cycle flows normally. NOTE: My BOSCH dishwasher is currently 14 years old, so there is some life left in it still.

[@timdunn2344]

You are king among men for this video.

[@JonMorganMadness]

Wow! Quite the compliment. Thank you. Glad it helped.

[@edwardtuttle6777]

Thank you!! It’s running again!

[@JonMorganMadness]

You're welcome! So glad the video helped. 😀

[@jaimegdeg6794]

It worked!!! thank you!!!

[@JonMorganMadness]

I'm glad it helped you. Thanks for the comment!

[@easygalleryframes]

This was great - amazing workaround. Thank you!!!

[@JonMorganMadness]

You're welcome. I 'm glad it was helpful. Thanks for the comment!

[@nzinganyagua6866]

Worked. Thank you very much for posting this!

[@JonMorganMadness]

You're welcome! Thanks for the comment. :)

[@johngreer8961]

This was a great hack - That said - I just got off the phone with Thermador for my 3+ year old dishwasher and they said they will treat it as under warranty and replace the control board - so give that a try!!!

[@JonMorganMadness]

Wow, thanks! I'll see if that works for me. :)

[@chuckarmstrong7358]

Tried that first and didn't work for me

[@marstedt]

Did the problem get fixed?

[@regdel8888]

What seems to work for me is to turn the water on in the sink, the same drain side that the dishwasher drain hose is on. Keep it running till you hear the dishwasher start to actually wash the dishes (a couple minutes). Seems to do the trick, the other options dont seem to work for me. I also heard that adding a gallon or so of water to the dishwasher to start the drain cycle works as well.

[@DeeApt-rl5vl]

Finally a fix! Thank you!!!

[@JonMorganMadness]

You're welcome. Thanks for the comment!

[@joshuagossett7337]

Worked perfectly

[@JonMorganMadness]

Good to hear! Thanks for the comment.

[@micomm46]

Thank u. It worked!!!!

[@JonMorganMadness]

That's awesome, glad it worked for you!

[@Oilboss403]

Thanks brother.

[@patrickmoan6709]

Similar problem here. Thanks. You video was like having a neighbor next door demonstrate a solution. Thanks!

[@JonMorganMadness]

You're welcome! I'm glad it worked for you. Thanks for the comment!

[@conniegreco8409]

Yes., our dishwasher too.

[@WashingtonSlyder1]

Big subscriber base, helpful video to many, ... my thoughts are you could get many more if you decided to do your best Kevin Spacey impression in all of them moving forward.

[@JonMorganMadness]

Lol thanks, I'll have to work on my Kevin Spacey impression and try it out. :)

[@libbymcdonnell6123]

We had these exact symptoms too. If you have these symptoms, check the water pressure to your house. Our issue was this. Water pressure was 110psig which was way too high. This damaged the water inlet valve on the dishwasher. This valve also restricts flow into the dishwasher, it does not appear to be a simple on/off valve. Our solution, replace house's water pressure regulator, and then replace water inlet valve to dishwasher and now it works again every time. To troubleshoot, buy the $10 gauge at home depot and make sure your water pressure is between 50 and 80 psig. Also, remove the kick plate on bottom of dishwasher and look for evidence of water leak on the left side of the dishwasher. The water inlet to the dishwasher is on the left side, and there is a 1 inch square open vent on it, in our case, water pressure way too high, it leaked out of this vent onto floor whenever water inlet valve was energized. My speculation is that too much water was going in, and the safety float triggered and shut the dishwasher down, but this is a guess. If you have an external valve feeding dishwasher that you can adjust, partially close the valve to restrict the water flow. If you reduce the flow and the dishwasher starts working again, this is likely your issue. It's easiest to tell if you can pull the dishwasher half way our, then you can watch the water as it enters. Summary: Symptoms: after starting dishwasher, it goes through a drain cycle, then starts filling, then goes through a drain cycle, then beeps and says it's clean. This happens over a 5 to 10 minute period. Things to check: 1) your house's water pressure. If high, you need to fix this because it will damage everything else eventually (think hot water heater) 2) Once that is fixed, replace the water inlet valve to dishwasher. This costs about $40.

[@libbymcdonnell6123]

Just a point of clarification. The water inlet i refer to with the vent where it leaks is not the water inlet valve. The water inlet valve (with the electrical connector) is the defective part. the water goes through this, though a tube, to the water inlet (a big plastic piece) this piece is the one with the vent where it leaks, but the water inlet valve with the solenoid and electrical connector is what needed to be replaced.

[@JonMorganMadness]

Thanks! This is helpful info, I'll check it out.

[@phthalo7]

Ahhhhhhhh thank you man!!!!!

[@JonMorganMadness]

You're welcome!

[@leesedavnykh7687]

It was the same problem in my case, but solution was different, and my solution probably will help someone - after increasing water in my heater- water becomes too hot for the machine that’s why it’s turning off so we just reconnect the machine to cold water line and everything works well

[@JonMorganMadness]

Interesting. Thanks for the comment.

[@Onewayto2024]

Your usage of the quotes around the word "fix" is accurate and it's good that you did that. I also tried your "fix" and sometimes it works, sometimes it doesn't. A problem with it is that it altogether eliminates the ability of using the timer. We usually turn our dishwasher's timer on for a 3 hour delay starting at 11PM because even through the machine is supposedly soundproofed it's still pretty noisy and can be heard into the den. So, using the workaround I'd have to turn the machine on manually at 2AM and hope for the best... What I found - just today - was that the small white plastic "baffle" that clips over the inlet to the drain impeller wasn't seated all the way. It wasn't rattling or loose, it was just not fully seated. I removed it and pushed it down as far as it could go, then pushed the little vertical plastic "tower" until the small tab went into a hole and made a distinct SNAP! Put the round screen & filter back in, turned the machine on and - SUCCESS. It ran perfectly. I even ran the machine again right afterwards - still fine. I have no idea how this baffle came loose. I think what is happening with this weird issue is that the baffle directs the drain water in a pretty direct manner. If this drain water doesn't flow properly through the drain hose at a certain rate, something picks up on this and causes the machine to just stop during the drain cycle and give you the dreaded "premature Clean" signal even if you've got quarts of filthy dishwater in the sump. Is there a flow sensor? I also want to add that after I snapped the baffle back into place I noticed the sound of draining water going into the fitting under my kitchen sink was MUCH more forceful and louder than before. Higher flow. Whatever it is this fixed my problem permanently.

[@JonMorganMadness]

Thanks for all of this info! I'm going to check this out on my dishwasher

[@Onewayto2024]

@@JonMorganMadness Thanks! Hopefully it will the fix for you too.

[@Tiffuhnayay]

Thanks Kevin Spacey

[@JonMorganMadness]

No problem.

[@annzillner7086]

Easiest way is to select another cycle other than auto, I use normal or heavy

[@JonMorganMadness]

I did that for a while, but it stopped working. That's when I found this work around.

[@Ultima2876]

What’s the fix? To open it and close it when it’s running?

[@JonMorganMadness]

Yes, that's all I have to do. If I don't then it never actually runs

[@rosenorrisgutman902]

The low rumble at the beginning of the cycle is the machine pumping the standing water out.

[@JonMorganMadness]

Ahh, thank you, that's good to know.

[@sethcooley7872]

Ok so I had these symptoms but this workaround did not help me. I did determine my issue though: recent switched to Members Mark soap pods and they had caked the basin where the pump suctions so badly that the pump could not empty the dishwasher. So I cleaned it all out, took apart, air compressed the drain line all the way to the disposal, then it worked fine. Don't use Member Mark pods! They suck!

[@JonMorganMadness]

Thanks for the tip! Good to know that about the Member Mark pods.

[@gretchenfisher3635]

Totally worked!! Thank you 😀

[@JonMorganMadness]

You're welcome! Glad it worked for you. Thanks for the comment!

[@seli14347]

It worked!! Thanks

[@JonMorganMadness]

Awesome, so.glad it worked for you! Thanks for the comment

[@rosetineo3775]

This is what I have had to do for months and it would work but now the compartment that holds the soap isn’t opening,,, so I think this make shift method for me is past due 😰

[@JonMorganMadness]

Bummer, our dishwasher is still going with this method. Hopefully I didn't just jinx myself!

[@leonelmartinez783]

Thx works for me

[@JonMorganMadness]

Glad to hear! Thanks for the comment 👍

[@erikbardy1739]

worked!! Thanks!

[@JonMorganMadness]

Awesome, thanks for the comment!

[@AbqMichaelMcDonald]

It worked. I wish I knew what is going wrong with the machine causing it to stop here. Clearly something is wrong. But this got me past it.

[@JonMorganMadness]

Glad it worked for you. I too would like to know what the issue is, but it keeps working for me, so life goes on. There are many theories in the comments of this video as to why it doesn't work. I haven't taken the time to investigate them. Thanks for the comment!

[@hansolowmfers]

The disposal has a piece that needs knocked out for it to drain. Pull the hose off and shove a screwdriver or a wooden spoon handle in the dishwasher drain port on the disposal and give it a whack. you will feel something give way. that was the knock out. put the drain hose back on good to go

[@WhatBigBrandsKnow]

Worked!!

[@JonMorganMadness]

That's awesome! glad to hear. Thanks for the comment!

[@conniegreco8409]

Thank you 😊

[@JonMorganMadness]

You're welcome. I'm glad the video helped!

[@Ali-rf2jj]

Thank you!!!

[@JonMorganMadness]

You're welcome! Thanks for the comment :)

[@emmanuelcahigas9269]

Thank you so much worked for my washer! The other video didn't work for me either

[@JonMorganMadness]

You're welcome! I'm glad it helped you. Thanks for the comment. :)

[@allbarrs8499]

So what is wrong with the dishwasher?

[@JonMorganMadness]

That's a good question. I'm not sure exactly. People have suggested different things in the comments here. I haven't investigated it more since this workaround is still working for us.

[@sjm8510]

The love child of Rand Paul and Kevin Spacey :)

[@BatBrakesBones]

so a bad door latch?

[@JonMorganMadness]

I don't think so, it seems to latch just fine and this happens every time we start the dishwasher. If it was a bad latch it seems like it wouldn't work on the second closing every time.

[@TheNYgolfer]

Just open and close the door once the dishwasher goes quiet but BEFORE it starts to beep. No need to turn it off and on and then hit start.

[@bobcamacho5897]

Does anyone know specifically what the problem or what part is needed to be replaced? This is the exact issue my Bosch dishwasher has. Runs first two "cycles" and then shows as a "clean". I've been using the workaround now for over a year but it's getting kind of boring to do so. We considered just buying another dishwasher, unfortunately I have a small under cabinet area and the Bosch dishwasher is all that I can find that has the same depth.

[@nlz242]

Some people say it's the turbidity sensor, acting up... i changed mine and it didn't help. Some people say it's the logic board itself, but that was too expensive for me to try and switch. I did dissamble every thing and clean up every single dirty parts and it also didn't help. Been using 'THE WORKAROUND' for like 5 years now... ¯\_(ツ)_/¯

[@twsd]

Some say it’s the overflow float. Some say there is probably a minor blockage somewhere.

[@bobcamacho5897]

@@twsd I finally gave up and bought a new Bosch. Much easier install, electrical plug is already prepped and relocated to the rear of the unit. MUCH quieter, so far so good.

[@Mahaney82]

All I ever keep reading is Bosch makes the end all be all dishwashers. Now Im hesitant.

[@JonMorganMadness]

Well, they aren't perfect, but even with having to do this workaround, I've had this dishwasher for over 15 years, and it's still going.

[@TayLybb]

Here's hoping 🤞

[@blue_beephang-glider5417]

Same problem. They can land and use flying self guided exploration probes on Mars, BUT spraying a glorified sprinkler on dishes... Out of the question!

[@michaelwong8598]

my wife would say i'm more teachable as a senior dishwasher

[@greg7744]

So 6minutes to say you still have t fixed it.

[@nathannielsen9489]

Hi

[@JonMorganMadness]

Hey Nathan!