Fixing a Leaky Delta Faucet - Try this First Before Replacing the Single Handle Valve Cartridge

[@stock7628]

Damnit now i want to know the light bulb story

[@JonMorganMadness]

Haha, well, maybe I'll have to make a video sharing the light bulb story. :)

[@JonMorganMadness]

I just watched my own video over to remember how to take apart the faucet and realized that I do tell the lightbulb story at the end of the video. So it's there if you want to hear it, lol.

[@kimourchi7382]

You guys are funny. Your video shows a real home owner story. I enjoy watching the video.

[@JonMorganMadness]

Thanks, I'm glad you enjoyed it! Thanks for the comment.

[@jessewitmier8262]

Worked like a charm and saved me 400$ thanks so much !!!!

[@JonMorganMadness]

Awesome, glad it helped you out. Thanks for the comment.

[@oldfarmerdan]

Thanks! i tore mine open and sure enough! loose as a goose! took it out, reversed the gasket, tightened back up and so far so good!

[@JonMorganMadness]

Awesome, I'm glad it helped! Thanks for the comment.

[@williamparker8318]

Ok you know that RP50587 might have been free if you call Delta and told them what was happening. These higher end faucets are lifetime limited warranty to the original buyer. Good reason to fill out your warranty cards. I'm on my second free Valve Assembly since purchase. Yes it did take 8-10 days to ship but that was ok in my case. I'm glad you figured it out and were able to return the new Valve. Cheers

[@JonMorganMadness]

Yes, I looked into a replacement, but we didn't have proof of purchase... like you said, good reason to fill out your warranty cards!

[@garyK.45ACP]

The cartridge "bonnet nut" (the brass part) was loose. That was the cause of the drippy faucet and the "gross" stuff around the collar and handle. Torque the bonnet nut to 70-100 _inch_ pounds. It should not come out "by hand". Best is a torque wrench and 1-5/16" 6 point, deep socket. But..."pretty darn tight" will probably work. The good news? You fixed YOUR problem. The bad news? That's usually not the problem. More often the leak is caused by a worn cartridge, and the cartridge would need to be replaced. It is also a good idea to change the aerator in the spout AND the bonnet nut and "V-ring" seal at the same time. If you're going to turn it off and dissect it, you may as well do the whole thing and not have to worry.

[@eddyg6093]

Love the 45ACP

[@eddyg6093]

You two could make money doing fix it videos. Just an fyi....she makes the video funny, he makes the video interesting..

[@JonMorganMadness]

Thanks! I guess I need to start fixing more things around the house! lol

[@fredjones6975]

Thanks...your video was very helpful in repairing my delta faucet.

[@JonMorganMadness]

I'm glad it was helpful, thanks for the comment.

[@johnsonhenderson7729]

Great basic, easy presentation

[@JonMorganMadness]

Thanks!

[@sooner_born2256]

Trim took whole thing off for me too, but not easily and I never was able to get trim off the nut. Just put it back with new cartridge and all was fine.

[@sabrinatuck229]

So what was the end result problem if you didn't replace the cartridge? Did I miss that part?

[@JonMorganMadness]

The problem was that the part holding in the cartridge wasn't screwed down tight enough. When I went to unscrew the cap on top of the piece holding the cartridge in (not sure what to call it), the whole think came off: kzbin.info/www/bejne/jGXKoayVetZjj6ssi=OKMgyu_Kmj8Azsj9&t=133. I then put it back together and tightened the piece more: kzbin.info/www/bejne/jGXKoayVetZjj6ssi=THL5voQRKNzraTDc&t=305. That fixed the problem for about a year. After that, it started dripping again and I ended up replacing the cartridge about 10 months ago. I haven't had it drip since.

[@buggeron22]

What if the allen wrench will not budge the screw? Not stripped…. Just stuck!

[@JonMorganMadness]

That's a tough one, not sure, maybe some WD40?

[@BN-yb6wr]

Thank you so much - followed this and worked like a charm!

[@JonMorganMadness]

Awesome! Do glad it worked for you. Thanks for the comment

[@kevinneal2575]

I wonder if Delta will replace the handle that I had to drill the set screw out of because it was essentially fused to the handle body. Actually, I’m pretty sure they won’t because from what I’ve seen in the comments in every single video about leaky Delta faucets, NO ONE besides myself could not get the set screw out. Even after cleaning all around the outside and soaking in penetrating oil, and trying an easy out. It’s did not budge. I guess I need to play the lottery because I’m one in a million

[@Papa-sm1wk]

Is that the same as buying a new electric mower before checking the gfci breaker?

[@JonMorganMadness]

Haha, pretty much

[@java2architect]

How to remove hot/cold water clip to get to screw. I have similar faucet. I tried to use small screw driver but am afraid I am going to break something.

[@JonMorganMadness]

That stinks. Ours clip covering the screw comes up fairly easily when prying from the bottom.

[@rejidavis794]

what size L and Key needed for loose?

[@JonMorganMadness]

Do you mean what size Allen wrench or hex key? It's the 3mm.

[@teddipenland5506]

Another informative video. Keep'em coming.

[@JonMorganMadness]

Thanks! We will!

[@randallmabry2034]

good job , i liked your video thanks!

[@JonMorganMadness]

Thanks! and thanks for the comment!

[@Ricovette]

Thoroughly enjoyed this upload... Thumbs up from me and thank you so much! Stay safe... Rico

[@JDye-youtube]

If your faucet becomes “sticky” and doesn’t want to shut off, remove the cartridge and rapidly move the cartridge handle all around rapidly, flush out the cartridge with water, repeat three or four times. This breaks up the calcium and sediment in the cartilage. Restored mine to like new function.

[@JonMorganMadness]

Good to know! Thanks for the tip.

[@anomaly783]

This worked for me- thanks!

[@donjasen7227]

Delta parts r guaranteed for life as long as you own your home call them and they will send u the part 4 free

[@JonMorganMadness]

That's good to know! Thanks for the comment.

[@albanavarro430]

Thank you so very much

[@JonMorganMadness]

You're welcome, I'm glad it helped you. Thanks for the comment.

[@thirithhut3115]

good job!!!

[@williamwaters4506]

Dripping for four years before fixing it, that made me laugh.

[@bountangher1972]

Recommendation: Do not OVER-tighten the bonnet nut (the brass cylinder part). In case if tightening does not resolve the issue, you’re gonna have a hard time trying to loosen the bonnet nut - thus stripping off & rounding out the corners of the nut without proper tools. Believe me, that happened. 😢

[@generhodes7796]

Delta lifetime warranty will replace for free. Don’t spend your $35.

[@JonMorganMadness]

Nice! I didn't even think about that.

[@sooner_born2256]

Took about 20 days for it to get to me from Delta but other than having to keep shuting off the water until it worked right it was worth the wait since it was free. PS, they expect it to be either registered for warranty or for you to have proof of purchase.

[@JonMorganMadness]

@@sooner_born2256 cool!

[@junzhang-jy4vm]

yes, but only for the original owner

[@WoodgemanX]

F Delta and their requirement to have proof of purchase. Just go buy a new faucet swap out the cartridge with the old one and return the faucet, F the big box stores for selling replacement parts for 'lifetime' faucets. This cartridge is crap, my Delta tub and shower valve has the Delta ball and rubber seat guts and the repair kit with the seats and springs is $5.00. It was $2.00 thirty years ago when I last replaced them. My Delta kitchen faucet looks similar to the $59 version without the spray house option. I purchased the $69 version with the spray hose, just to cannibalize the sprayer and hose attachment to repair a friends fancier faucet with the brushed nickel finish. It was cheaper than buying the replacement parts separately So when my faucet began to drip, I was going to use the parts from the spare faucet and repair what I thought was the old ball design, remember paying $89 for it, no way am I spending $40 for a cartridge plus tax and shipping and handling. I know nothing lasts forever and prior to this I was satisfied with Delta products because of their reliability an availability of replacement parts at a reasonable cost. I recently roughed in a Delta tub and shower valve that came complete with a trim kit and cartridge for $89. The cartridge required some adjustment because water coming out was lukewarm. I was aware of that there were two types of Delta tub and shower valve cartridges, but this was a new one and the price is almost the cost of the entire kit. Sorry Delta, not playing your game anymore, I remember buying your shower only valve and the valve body had an outlet for a spout with no plug included. The nearest store was 45 minutes away(HD), and they're out of stock of 1/2" $5 brass plugs. I was going to buy the Moen valve, but the Delta was $5 cheaper. The home owner had to wait till the next day to start closing up the wall to start tiling.

[@EarthandStuff]

You guys are funny

[@MemphisSweatts]

Delta has a lifetime warranty on parts. They would have sent you the part.

[@StephenBroom-s2o]

Just a note. Delta has a lifetime warranty on their faucet parts. Call them and they’ll send them to you for free.

[@JonMorganMadness]

Thanks for the tip. Do you know if you need some sort of receipt or proof of purchase?

[@WoodgemanX]

Delta will send you a free cartridge, if you ask.

[@JonMorganMadness]

That's awesome. Do you know the number call or website to request it?

[@joedoakes8778]

Oh, don't return it, you'll need it, believe me.

[@JonMorganMadness]

You are correct. I replace the cartridge about a year after this video when it started dripping again. It hasn't dripped since.

[@joedoakes8778]

@@JonMorganMadness I got fed up playing their game and just bought a Moen. It has a cartridge too, so we'll see. Other than that, I liked the faucet.

[@scottpentecost2606]

Delta will send you a new one for free

[@raygilmore8281]

Def too much commentary for someone who is trying to see how to fix their faucet

[@pjmarkert1]

If you call delta they will send the parts for free

[@melgillum6611]

Lose the second person, making the comments. Not entertaining.

[@lauramannina9684]

Ok cranky pants

[@dienanh75]

Thank you so much

[@JonMorganMadness]

Sure thing! Thanks for the comment.