BOSS RC-500 Verse + Chorus A/B Looping! THE CORRECT SETUP!

[@BenRowlandsMusic]

Check out my BOSS Product Guides and more: www.benrowlandsmusic.com

[@BernardYin]

This has been so helpful. This fiunction is part of the reason I purchased the RC-5000. Thanks.

[@michaelkelley1574]

Thanks!

[@kurtthomas1809]

Thanks mate. Very useful

[@livingroompickersclub6358]

I am Not a very tech savvy Individual. I've always Shied away from petals and such Preferring rather to focus My efforts on my playing. But Having People like you Learning and sharing In a way that is easy to understand Is very helpful... Thank you

[@drdrdd]

I have been trying to figure this out for like 2 weeks. Thank you!

[@ragnaringibergsson562]

Thanks for that. I'm looking to trade up to an RC 500 from the RC 5 and wondered how to set it up for a verse-chorus scenario without having to hit several buttons.

[@hankberumen3804]

Thanks Ben- immense help!

[@fatboyspence]

Thank you Ben, that answered my question perfectly.

[@twiglet2214]

Very helpful - just started with mine - how do i play back a saved memory ? Struggling a bit but having fun !

[@beauwalker353]

Would greatly appreciate any help with this issue. How do I change the tempo of a prerecorded saved track while still maintaining the quality of the tone? Presently any time I try to manipulate the tempo of a recorded saved track I get a very undesirable, unwanted warbling/flanger sort of effect on the signal. I want to be able to speed up the tempo without compromising the sound. Is this possible, and if so how?

[@MrAgentbozo]

Great video thanks, quick question: when in single mode can you have different drum pattern for each track. When i change one, the other track also changes

[@insidethemani9852]

Great vid mate but is it possible to assign drum pattern variation A to track 1 and variation B to track 2? Can't find a way....

[@RonnieSandifer]

I have that same question

[@GabrielMurrayBC]

Can this same basic workflow be done on the RC-202?

[@aranwatson4301]

Thank you!

[@darkface15302]

Hey I really enjoy your videos they definitely helped me out a lot in finding my optimal setup! Just thought I’d share my setup with you. I made a pretty powerful pedalboard like yours so I’m using the boss gt core 1000 with stereo output into the boss rc-10r then split the connections for the RC-10r like in the video you showed us and both connections going into the Darkglass elements (drums into aux input of elements and guitar into the amp input of the elements). This lets me use the boss gt as amp and ir/cab sim or the amp in the gt and the thousands of cab sims in the elements 🤘🏼 plus the elements is a headphone preamp, EQ and has a Bluetooth receiver so I can jam along with backing tracks at the end of my signal chain! Would love to see what you think if this setup. Also I can record high quality sounds and video using the rode sc6-l into my iPhone and get studio level recordings into my phone or for IG/Facebook live Thanks again for all the tips I really appreciate you helping all of us out. Take care and hope you and your loved ones are safe and in good health🙏

[@martinconverso2866]

My friend I ve got a question, if I choose track 1 and record an instrument and then in the same track I record another isntrument on top and then I want to go to the the first one but keep the last one somewhere so that I can go back to it when ever I need, what would be the set up for that function in the track? txs and congrats for your videos..

[@mannyhoward2353]

Mate , you've a saint for describing this. I'm a amazed, and disappointed, that Boss don't detail this basic functionality in the manual.

[@pavelrehak8046]

Thanks for the video. I have a question. Is it possible to assign a pedal to switch between two different drums? And I would also like to know if I can have different drums assigned to each of the two tracks. Thank you

[@xlooper2355]

It's a shame that this doesn't work synced to internal rhythm when tracks 1 and have diferent lengths.

[@BlackSun3Tube]

In fact it works. Read my answers to validoberz and mylos11. I was desperating but I re-red the parameters sheet and then came the light ! :)

[@DanielSchärer-j1m]

niceness thanks so much!!

[@JeeWeeDonkers]

Okay, I had figured this out myself eventually. But how do I do this synced to the rhythm machine? And I run into anomalies when using different length verse and chorus loops.

[@JeeWeeDonkers]

I figured it out, at least partially. kzbin.info/www/bejne/iV7TopqflLWpjtU

[@piercemcintyre1327]

Turn loop sync back on and it still works and stays in tempo

[@JeeWeeDonkers]

@@piercemcintyre1327 True, but if your loops are different lengths you may very well run into problems whether the loops are starting at their starting point or somewhere halfway. This is a nasty bug.

[@piercemcintyre1327]

@@JeeWeeDonkers I’ll continue to experiment but so far I was having no problem using different length loops on single mode. It took me a while just to even think I understand the difference between loop sync and tempo sync, still not sure, but just plugging it in I’m able to have fun with it in single mode or multi

[@BlackSun3Tube]

Read my answers to validoberz and mylos11. Briefly: set "loop s" to on AND activate quantize to stay sync while recording. Then, let them like that or set at least one "loop s" to off, depending of what you want as a result.

[@walk357]

When i play my guitar through the RC 500 the volume level is very low when I'm doing a loop . I tried turning up the volume on my guitar. Question how do you control the volume level output for your instrument or increase the volume ?

[@romh]

thanx for great video! can i have one question? is it possible to use exp pedal for volume of recorded tracks?

[@harryharris1619]

Note: This does not work with the rhythm machine of the RC-500 as the tracks will get out of sync with the beat after a couple of play measures. You will notice that Ben has the rhythm turned Off when doing the demonstration. Not sure he has a demo working with the rhythm machine playing in sync with Verse > Chorus etc.

[@jefreysiler]

Dude I was losing my mind trying to figure out what I was doing wrong, is there no way to do rhythm on while “loop-recorded-verse” then “loop-record-chorus” and toggle back so it syncs at beginning of each loop?

[@harryharris1619]

@@jefreysiler He has 'loop sync' turned off in order to achieve the A/B looping. That is the issue with the rhythm track falling out of sync. I do not think there is a work around for this. He probably should have said something about this.

[@jefreysiler]

@@harryharris1619 yea I was confused, thanks for your note. One work around i have found is making say “trk2 measure length” divided-able by “Trk1’s measure length.” It doesn’t allow room for error (with the unpredictability on stage) but I’ve found that works on a couple of my songs.

[@geraldkunde3208]

Hello , yes I faced the same problem. For some measures it's working well, but then the rhythm machine is getting confused. I have tried, but don't know how to resolve it. Does anyone has an idea?

[@harryharris1619]

@@geraldkunde3208The rhythm does follow the tracks with the 'loop sync' turned off. It will work for a measure or too but then fall off. The work around is the one that jefresiler posted above but its somewhat difficult to deal with. The RC-500 also does not slave or sync to an external midi clock The 500 can only be used as a master clock for external units.

[@chuckmottmusic1915]

Is there anything to do with track 3? I step on track 2 and it doesn't change. Just plays back track 1.

[@tspfl9073]

Setting T1 loop.s and T2 loop.s both "off" , i found that the tracks got out of sync with the rhythm. Had to go back to "on" for both.

[@pengchen634]

If I need to record part 1 and part 2 for a song, When track 1 plays part 1 and switching to track 2 for recording part 3 , do I have to stop it to do the track 2 recording ? Or it can switch to track 2 recording mode without any timing delay or breaks. Thanks!

[@straycat7247]

I notice you first record and play Loop 1 before cueing and recording Loop 2. Is it possible to finish recording Loop 1 (say verse) and simultaneously start recording Loop 2 (chorus).

[@nicholasbarton4215]

OK, I've managed to do that, but I'd like it to play track 2 as soon as I hit track select. As it is, I have to hit track select to change to section b (chorus) and then hit play. Is there any way to make it possible to just hit one switch?

[@MrElm5150]

This is exactly my question., I'm using it to back me on leads (guitar/solo) during an acoustic version of Hotel California. I want to solo as long as I wish including the first set of the signature triplets at the end where I have also recorded that set on Track 2 previously. Then on the second pass, I'd like to stomp that track button and have that rolling so I can THEN play the harmony. I don't want to have to press "track" and then "play" in the middle of all that. Too much to deal with!

[@mikevanleeuwen2858]

Hi, it works but it does't sync to the rythm machine. How ro solve this??? Mike

[@DaneRobinsonMusic]

Did you figure it out?

[@chuckmottmusic1915]

But when I record a verse loopm on track and a chorus on track, I go back to play the verse and it plays fine, but when I go to track 2 it doesn't play the chorus loop from the beginning but rather starts halfway into the loop. Help?!?

[@brianturnbull8326]

Hi, I'm trying to sync tempo from SPD SX pro to RC-500 using downloaded .mp3 with imported time signature, can you please help me set up? please help regards Rob

[@joey.liberatore]

Thanks Ben! Under custom controls, is there a selection that would allow me to clear both tracks at once without playback occurring?

[@marcinperz2453]

You should hold Select Track for 2 s - when its pink - 2 tracks are selected. Then simply hold Stop for 2 s.

[@barakados]

Can someone tell me if this configuration applies in the memory slot we set it up or is just a general configuration for the whole looper?

[@mikemcquaid3912]

Hi Ben, bought the ultimate course (which I am thoroughly enjoying) to solve a specific problem that I can't seem to solve still. Hoping you, or someone out there can help. I like to loop live, just a guitar, using verse chorus on two tracks set up as single, series, track change at end of loop and have experimented with loop sync on and off on each track. I am able to make it work most of the time, but all too often when switching to second loop or chorus, it is completely out of sync with drums. The tracks are quite often different lengths and I like to loop on the fly without having to change settings each song. The songs that I am experimentiing with are I Saw Her Standing There, Green River and Brown Eyed Girl. Sometimes it really smooth, I use track change at end of loop and it works well (when it works.) I have learned that you can't start recording that second loop ahead of time (using loop end) as it throws it off, so have been pretty accurate with that and still, randomly it goes way out. Any advice would be helpful.

[@piercemcintyre1327]

I have been using “single” mode with loop sync on and tempo sync on for both tracks and works perfectly and stay in tempo. The anomaly arises when you turn off loop sync it also turns off tempo sync. Single still works

[@isaaclazaro24]

Hi Mike I am trying to achieve the same and bought the RC500 for exactly this. 2 x tracks (chorus and verse) different measures, single, series for each track and are to be synced to the rhythm/drums. It was mentioned to turn off 'loop s' for a track after recording to have playback begin at the start of the loop as a work around. However for the money spent on the RC500 this is an issue. I'm almost thinking to return it if there is no way to achieve this. I can't be fiddling with the interface in the middle of a gig.

[@barakados]

@@isaaclazaro24 @mikemcquaid3912 @piercemcintyre1327 Hi folks, any of you can tell me if it's possible to import 2 wav files in track 1 and track 2 of the same memory slot, to use as verse - chorus ? Thanks

[@andy_J_11]

Great demo, thank you! One question though - I would like to start recording a chorus IMMEDIATELY after stopping recording the verse (as opposed to having to hear the verse playback again before recording a chorus). Is this possible?

[@BDX2BDX2]

Hi Ben, thank you for the invaluable info. I tried out a few loopers RC5, RC500, RC600. I'M keeping the 600 and returning the other two. The only problem is I don't want to return any. I'm new to loopers, is there any legitimate reason to keep more than the 600 ? Thanks.

[@JoshBeetler]

My loop Is falling off the click when it starts over even though I have the sync setting on, any ideas?

[@musicproductionvideos5019]

Great video! Many times when I record a guitar idea without drums playing (sometimes setting the tempo and setting a beat will lose the idea)... the drums are too fast when I bring them in... double time in fact. Is there a way to correct that afterwards... or avoid that? Thanks!

[@piercemcintyre1327]

Use the tempo button to tap in the tempo

[@narcsoul]

I can't assign to make a rythm fill break. I have fs5 for this *** And also in case of having assign control 1 .. in "control" section also front control 1 what do you choose ?? Can you help?

[@piercemcintyre1327]

I don’t think there is any need to turn loop sync off to have single mode work. In fact turning loop sync off causes loops to fall out of sync with the memory tempo.

[@BlackSun3Tube]

Read my answers to validoberz and mylos11. Turning on or off the "loop s" parameter (with quantize on) will have different results, depending on what you want to achieve. Briefly: record with "loop s" and "quantize" on if you want to stick to the rythm tempo. Then let the "loop s" like that or deactivate at least one if you want different behavior while playing the recorded tracks.

[@isaaclazaro24]

@@BlackSun3Tube Thanks - I found turning off 'loop s' after recording helped if you want playback to begin at the start of 'track 2' for example. If 'loop s' is kept on 'track 2' playback will start midway through especially if there are different measures between tracks 1 & 2. This is annoying given you have to physically change this each time on the interface. Not sure why Boss has created the functionality this way. At minimum there should be an extra control to assign to a footswitch / midi player to toggle 'loop s' on / off.

[@ratale21]

1 issue im having when i set up tracks for separate versus is the 2nd track seems to be off beat. Any suggestions ?

[@xx-ip7ej]

Can you set two different rhythms across each of the tracks?

[@BlackSun3Tube]

Yes, as it seems, but you will have to use the assign function for that ...

[@insidethemani9852]

@@BlackSun3Tube Any idea how to do this?!! Have you found an instructional video on it? Crucial in my view

[@BlackSun3Tube]

@@insidethemani9852 I didn't use my RC 500 for quite a long time now, but if I have the time I will do that and tell you how

[@0k53sejh]

How do you save your set up to all of your memory settings { 1-99} so you do'nt have to keep going through that for each one?

[@validoberz]

If u set ‘single mode’ u don’t need to set ‘off’ each track sync. Am i wrong?

[@nickycharlesworth]

Agree - I have Play set to single mode and that's it. If I switch off the Loop Sync I get very odd playbacks.

[@DavideNoseda]

Never set OFF track(s) SYNCH. Unless you want to go ambient

[@BlackSun3Tube]

It depends on what you want. (solution here with firmware 1.04, last one at this day). Setting the quantize function to "measure" AND setting on "loop s" will actually activate the quantization, which will not work if you do only one of both. So it's higly recommandeed for standard loops. Then, if you want the track 2 to begin (while playing it, so, after recording, this time) at its first measure, you've got to set at least one "loop s" to off. But if you want the 2 tracks to complete each other, you've got to let the 2 "loop s" on. For example, recording one note per beat on T1, you record the C and D notes. And on T2, the notes E F G A B. Then, if you turn at least one "loop s" to off and play one time each track, you will hear C D E F G A B. But if you let both "loop s" set to on, you will hear C D G A B, as the E and F of the track 2 are played silently at the same time you hear the C and D of the first track, and when you do your track change, the second loop go on its "road", but now you hear where it is on while the track one shut up. (supposing of course, you change from T1 to T2 without stopping the flow - can be achieve by setting the "single change" parameter to "loop end", for example.). Note: to have different lenghts for track1 and track 2, a good way is to set the tracks lenghts to "auto". Read my answer to mylos11 for another kind of explanation.

[@ragamuffindreams6052]

Hi just would like to record loop 1 (verse) on track 1 then loop 2 (chorus) on track 2. As it appears in this video you seem to have to press track select that extra tap won’t work I need to switch to chorus on the beat. There a way to switch between track 1 and track 2 directly without the track select step in between? Appreciate your work!

[@BlackSun3Tube]

You can chosse an immediate change and assign to a switch several functions

[@gianfrancosalvio7440]

Hey, Ben, did you find a way to stop a loop without stopping the rhythm too? I've tried messing around the footswitches settings, but just can't find a way

[@DavideNoseda]

Under RYTHM parameters: set STOP to OFF. Et voilà

[@BlackSun3Tube]

I agre withe David Fleurs answer. And would add "Et hop!" :)

[@KunchangLeeMusic]

Thanks for this vid - it’s so weird how much hate this pedal gets because of this very question

[@clemensmaguire2953]

Hi Ben! Thanks for your video. I 'm thinking of buying a RC 500. And will definitely buy your course too. But still don't know if a Looper is right for me. Could you tell me please if I can record a full song ( vers, chorus, vers, chorus, outro etc.) on a RC 500 or is the separating of the tracks (you showed in your video) only for Live gigs and you need to press the switches all the time? Cheers

[@BlackSun3Tube]

A single track can record up to 1.5 hour ... should be enough for one song, no? :) But if you don't want to play the entire song in "one shot", instrument by instrument, overdub after overdub on a single track, you will have to use switches to change tracks and memories too in most cases.

[@andreafiorito9491]

I think setting the loop sync to off for both tracks is not necessary and may lead to unwanted results. Loop sync syncs the start of the loop with the start of the rhythm measure. In my case this is desiderable. Play mode to single sets the loop as verse / chorus. What helped in my case was to set the memory->rec->quantize to measure.

[@andreafiorito9491]

after further tests, i can say the firmware is full of bugs/unintended behaviours. the time when you press the record switch to record the chorus, relative to position of the first loop influences, the duration of the chorus loop. If the verse loop is midway, the chorus comes out same length of the verse. if you press at the start of the verse loop, chorus can be recorded of different length. The playback seems also to be influenced, like as if the positions of the loop was changing also if the loop is not playing. so you can end up to play the verse midway instead that from the start.

[@BlackSun3Tube]

Read my answers to validoberz and mylos11, you will see what to do and when ...

[@stephendobby2157]

Can you pause a loop mid way through , wait for 30 seconds and then continue the loop from the same place ?

[@BlackSun3Tube]

I don't think so. But I may be wrong, having bought the RC 500 very recently with max 3 hours of pratcicee, even if I did solve some problems by reading and re-reading the parameters sheet. Can't remind such a pause function ...

[@MOAB-UT]

My RC-500 has a longish (5 seconds or so) delay AFTER I hit STOP. I notice this behavior even more on longer loops. At first I think I missed the button or the looper is broken, but several seconds later, it finally stops. This really throws me off. Especially because the Drums/Rhythm keeps going. To be usable, it needs to STOP immediately. I have about 10 other memories saved. Is it a buffer/memory issue? Do I need to update firmware? I have done resets in the past. I have it plugged into a 300ma supply. Do I need to upgrade the PSU? Otherwise I really love the Looper. Has anyone else experienced this and found a fix? If my loop is very short, say 5 seconds, it STOPS immediately. Any help or insights would be greatly appreciated. Thanks all!

[@mikevanleeuwen2858]

Hi , do you know a way to mute the drums on track two . I mean, sometimes I have a verse on track one end a chorus on tarck two (most situations/ presets I make ) . But sometimes I play a blues song ( only a 12 bar so I don 't need a verse /chorus and one track is enough. But it would be cool if I can use the second track for only a bass part . So I 'm trying to find a way to mute the drums (drumtrack) when I press the track two button where I want only the bass. Maby I can setup an extra pedal to mute the drum with my foot . But that will be tap dancing because I also have to press the track button to select the second channel . It would be great if you can store the "drum mute "within a track . And when i select channel one again that the drum will play again. And is it possible to programm a different drum sound or the B variation on track two and f.i. the A sound on track 1 ? I know you are a smart guy with all these pedals . So I hope you can help me. Thanks a lot, Mike

[@ProfessorPflaume]

I think via assigns you could add a secondary action when track 2 playback is startet. So when T2 playback starts turn rhythm off. Haven’t tested it myself. But I know it’s possible to create an assign that solely listens in order to react to another action. Hope that makes sense

[@tspfl9073]

It's the dumbest thing in the world to have the defaults NOT set for verse on one button and chorus on another. It's just ridiculous, 99% of all songs have verse and chorus. Thanks Much for the concise setup video!!!

[@pulosky]

but is there any way to do this and keep the loops in sync with the beat?

[@lindsaydw]

Mine stays in sync. I switch between track A and track B that are different lengths and keep the beats going the whole time. I also use the pedal as a master clock and it sends the bpm to Ableton through USB at the same time

[@pulosky]

@@lindsaydw Yes, but only if the lenght of the loops are the same or multiple. If this don't happens (wich is the case in many songs) the shorter track gets filled with silence or the longer gets cutted

[@lindsaydw]

@@pulosky Maybe I am missing something about the issue is. Here is a loop I just made. I recorded track A first for 4 bars. Then I recorded track B for 1 bar. The recording below is me happily switching between them. I could make track 2 any length I like. It would need to obviously be in the same time signature 4/4 in this case and same bpm. Let me know what you reckon www.dropbox.com/s/1b11w1f0t45qnjz/20210418_101227.mp4?dl=0

[@Montmarcey]

Are you using the right batteries and/or correct power supply? I was using it with the power cable from my street cube cos they're the same rating. Couldn't do it, but it seems to work alkaline batteries.

[@Montmarcey]

oh hang on, that didn't work after all.

[@sukotto42]

I bought this pedal because of videos like this. Looks like it works beautifully. And it should. It’s really so close. However, after a deep dive, I have found the truth is, as long as Loop Sync is on, which you need to be in true sync with a set tempo, the tracks still just play concurrently. This is a big problem when you intend on loops with different lengths. This means that switching these loops A/B just switches them at the time you’re at within the other loop; they’re just constantly playing back and switching focus, instead of just stopping one and starting the other from the beginning. Tricky to explain with words, but the literal worst to deal with. Makes it unusable for my purposes, where all these demonstration videos advertising this feature made me think otherwise.

[@isaaclazaro24]

Hi Scott - I recently purchased the RC500 and have experienced just have you described. This is the only reason I bought the looper. I wanted to play two tracks (verse and chorus) single track, series, different measures, using rhythm that start at the beginning of each loop when I switch from T1 to T2. Doesn't look like there have been any firmware updates since to rectify this as they're constant playing back and it cuts halfway through the longer track.

[@glennhagerman4133]

Was just dealing with this. So frustrating and time consuming trying to edit this out. I guess it won't

[@FrankXFlores]

why doesn't anyone cover how to do drum fills?

[@gerrymacpherson9598]

Holy cow !!!! it has to be easier than this.....................................

[@chuckmottmusic1915]

So I am trying to add a drum loop for track 1 for the verse, and a different one for track 2 for the chorus (actually just a variation). Does it just record a command to play that suggested loop or does it record audio to the track. And I should be able to record another variation and another bass loop on track 2?

[@insidethemani9852]

Did you find a solution on how to have VARIATION A in track 1 and VARIATION B on track 2? Can't find one myself. Annoying to say the least!

[@mylos11]

I can’t seem set the bar length to say 4 bars and it used to stop and play the loop back automatically without me having to press the button again to finish loop and now for the life of me can’t get it to do it now grrrr !!

[@BlackSun3Tube]

Because I experienced some pbms, here's my solutiion depending on different way you want the loop to work, in single mode (so A will be played, then B, and so on, but not both playinng at the same time). If you want the tracks to be recorded synchronized to the rythm(and together too), you've got to set the memory quantize function to "measure" (firmware 1.04) and the tracks "loop s" parameter to on. (The quantize function works only if the considered track is set to "loop s" on AND the quantization is activated). Then, two cases, assuming for example that you want the change between tracks coming at the end of each loop (track change set to .. "loop end"! so ...). As an example, you've got a 2 measures track 1, and a 8 measures track 2. You play 2 times the first track, then play one time the second track (note: requires tracks length parameter set to "auto" for recording, so you can have 2 different lenghts without saying, for each track, the lenght needed - after the recordig, the track measures number will be displayed automatically in this parameter page). First case, if you let the parameters "loop s" of both tracks to "on", the second loop will begin at its 5th measure (the two tracks start virtually together, even hearing just one because of the "single" memory parameter; it's a bit like if the entire loop has the lenght of the biggest track, and you can change track in the midddle of this duration for example; the "loop end" parameter just ensure you play the entire track before the change occurs, but not that the newly activated track will begin at its real start, of course). But, second case, if you want the track newly activated to start at its own begining (in my example, you play 2 times the first track, then play the second track wich will begin at its own first measure, not at its 5th one, like in my previous case), you've got to set, for example, the second track "loop s" parameter to off. So, you've got to change at least a "loop s" parameter between recording (on) and playing (off)... Read my answer to validoberz to complete a bit this.

[@ksmcquee]

@@BlackSun3Tube THANK YOU, Black Sun!!!!!!!!!! THIS was the answer I've been looking for. Makes perfect sense, now that it's been explained.

[@BlackSun3Tube]

@@ksmcquee If I could help, that s cool :) I didn't work on this device for some times now, I think there was another parametrer to change to ensure it works perfectly everytime - I don't remember if I did take it in account here or no. But tiis should be a good approach on the way to get what you want - there may be too some firmware updates since I worked on it last time, with maybe some changes ... Thank you for your comment!

[@JohnpaulLemley-n5w]

The only thing i dont like ..is bending down and change buttons..my trio i dont have too do it..i am returning my boss rc500

[@geraldkunde3208]

Hello Ben , thanks for the video! But I have faced the same problem as @harryharris1619. Do you have an idea how to resolve it?

[@jdsimz8147]

Don't know why the factory setting isn't like that. Honestly most people are buying a two-track Looper expecting it to do that. I know I did

[@chuckmottmusic1915]

So this is the deal with this, is that if you are precording the tracks as i do, there is no real point in doing track A for verse and track b for chorus, because if you are somewhat ADHD, you can easily forget that you have to press track 2 to play the chorus, then track A to play the verse. I say eliminate the pedal dancing and record the whole thing on one track if you are prerecordingfyour tracks, then memorize the arrangement. I tried setting these up as verse chorus, and live, kept screwing it up because of the pedal dancing thing. You can do the verse/chorus thing if you want, but you really have to get used to the pedal dancing, but , if you aren't live looping , why put yourself through that. Maybe figure that out later and commit the pedal dancing to muscle memory before trying it live.

[@mixermantim]

this method docent work. there must be more settings that must be changed

[@andreafiorito9491]

Btw I'm the one that disliked this video, as per current firmware, no matter what combinations of parameters you set, you bump into weird behaviours. So this video is basically false information, or misleading advertisement.

[@davidpotsdam]

that is wrong info .I tried it .there is a better way.pleasee correct for your subscribers