Bradley Mowers! Are They Truly Worth the Investment?

[@michaelpotts3685]

I know this video is a bit older but came across it doing some research. Im a part time solo operator considering picking up my first stander. Looking at the 36 Bradley, thanks for the video its definitely helped. Feel like for the price point its worth it.

[@lawndudelawnmaintenancellc3203]

We just bought a 36 inch Hydro walk behind along with a 61 stander at the beginning of the season. Every unit we have are great units and worth every penny, personally I think you’ll be great with the 36 stand on I’m wishing we would’ve went with that instead of the walk behind but needed it for some hills

[@deeremt9532]

LOVE MY BRADLEY MOWER. I got the 52". I've gotten a ton of complaints on the quality of cut. Without a doubt the best commercial mower I've used.

[@lawndudelawnmaintenancellc3203]

It seems to stripe better with the mulching blades or blades used for wrights

[@deeremt9532]

@@lawndudelawnmaintenancellc3203 sorry complements. Stupid autocorrect.

[@ST1NG_Auto77]

@@deeremt9532 Just edit your comment. So people dont get confused.

[@rcash3625]

Wish bradley was making a 32 Stander as well

[@lawndudelawnmaintenancellc3203]

Same here….. I prefer that over a 36💯

[@marcsmith3781]

I have the 52" and they are worth the price but I'm not sure I would buy another one for my business. They are built like tanks but for me being 6'2" I'm definitely leaning over all day. I've had only minor things break so far but I did have an issue with it on St. Augustine with the mower burning turf in spots. Particularly on turns. The design throws alot of heat under the machine and back on me while running. I notice they have a new design now with the exhaust upright and in front of the motor to help with that issue I guess. So I just used my vantage on those lawns and the issue went away.

[@lawndudelawnmaintenancellc3203]

Marc Smith Definitely a few flaws I’m hoping they correct in the future.

[@cclawncarellc8469]

Marc Smith they make taller controls for them you can order

[@ryanwaczkowski6949]

How's the quality of the cut? Had toro grandstand for many years. They have been great machines. Just nervous to switch over and regret it.

[@lawndudelawnmaintenancellc3203]

Quality of cut has been great! I was hesitant about this too before buying but stripes great. I do notice it strips better with the mulching blades. Nick with one love recommends bobcat stander blades for the best stripping, I’ll try them this spring.

[@Johnslawncare]

My bradley is great so far. i see some of the cons you do also. good vid

[@lawndudelawnmaintenancellc3203]

Definitely best bang for your buck though. Thanks for watching!

[@thomasrose6880]

It honestly looks like a bobcat with red paint

[@lawndudelawnmaintenancellc3203]

You’re exactly right. From what I heard they are made the same but Bradley you’re getting it from half price

[@thekingscourtyardlawncares9324]

Just found you channel and subbed. I went went with the 52 inch too. It’s been a great mower for me.

[@lawndudelawnmaintenancellc3203]

The King's Courtyard Lawn Care Service appreciate it! Just subbed to you as well. Mower has been great, thinking about adding either a 36 or the new 60 they’re coming out with.

[@thekingscourtyardlawncares9324]

Lawn Dude Lawn Maintenance, LLC I’m planning on adding the 36 inch probably this year or next, mainly for them smaller yards. Can’t wait to see the progress and growth for 2020 season. Keep the videos coming.

[@lawndudelawnmaintenancellc3203]

The King's Courtyard Lawn Care Service for sure let’s make 2020 legendary. You keep up videos as well!

[@JH-un1vt]

Where are you guys finding these mowers? What location? I looked them up online and my closest areas don't even actually sell them.

[@thekingscourtyardlawncares9324]

@@JH-un1vt So Bradley Mowers doesn’t have dealers everywhere. They are kinda an online dealer if you don’t have one in your area. I was fortunate to have one a little over an hour away from my house. But if you got to the website or call they will ship it to you (or the nearest FedEx)

[@thenate243]

Hey man, loving the videos. Have you had any spindle issues on the Bradleys?

[@lawndudelawnmaintenancellc3203]

Thanks for Watching! Nope no spindle issues And that’s with us running the X blades in the fall each year

[@DjGoldOn3]

Would you recommend Wright or Bradley!? Buying first stand-on!

[@gavinblack7154]

I’m in the same position wright or bradley

[@lawndudelawnmaintenancellc3203]

Bradley hands down. Especially as your first

[@nickpowell496]

Just got a Bradley yesterday... run my own business and I’ve ran them all all the way to a sit down 74 Ferris I own.... a 52in Bradley is hands down the best mower I’ve ran

[@lawndudelawnmaintenancellc3203]

Best return on investment for sure

[@rellmonger7935]

Kool & what year is your mower?

[@lawndudelawnmaintenancellc3203]

2019

[@peterstansfield3391]

I am looking to buy either a 52 Bradley or a wright stander 52 what one would you get and also how do they both cut with mulch kits on because I am so sick of bagging every lawn. Thanks

[@lawndudelawnmaintenancellc3203]

peter stansfield both have pros and cons. We provide a nice stripe with both. The wright has lasted us 10 years but if I had to go with one I get a Bradley since you get a mower built with good quality and if you compare pricing could get two Bradley’s for the same $. I do like the fuel mileage and Kawasaki better on the Wright but Bradley tends to hold hills better and is actually a little quicker. It’ll have to come down to personal preference and dealer support but we’re looking to add the Bradley 61” once it comes out

[@peterstansfield3391]

thanks for your help looks like ill be buy a 52 with mulch kit. Just waiting for checks to come in.

[@lawndudelawnmaintenancellc3203]

peter stansfield No problem just get an hour meter off Amazon when you purchase it.

[@willkumal8200]

Great video

[@lawndudelawnmaintenancellc3203]

Thank you 🙏🏾 💯

[@Liledgy100]

Does it have seperate hydro motors and pumps for the drive wheels?

[@lawndudelawnmaintenancellc3203]

Yes, each drive wheel has one pump and motor.

[@firstname6208]

actually this machine has hydro gear zt3400 transaxels. not pump and wheel motors.

[@joshuaswanson3068]

Would you recommend the cheaper Briggs commercial engine ?

[@lawndudelawnmaintenancellc3203]

Joshua Swanson Both the engines are are Briggs but for us we went with the one that was a little bit more expensive the Vanguard because if you’re going to spend your hard earned money it might as will be for the better and most proven to be reliable engine. Also the Donaldson air filter is better for this line of work on the engine when it comes to dry/dusty or wet conditions.

[@firstname6208]

I have the "commercial turf" engine on mine. I do not over maintain the air filter- remove, clean and inspect it every 50 hours. new filter at 200hrs. put some grease on the air filter seal before installing it- even with 0 hours on the machine. keep the machine blown off after every customer keeps things looking good and always watch for loose bolts, frayed belts, loose wires, etc. always. change oil and oil filter every 50 hours (even if its not dark). oil is the life blood of these small engines. check oil level once a day in a clean environment. don't be shy with the grease gun, push the dirt out and wipe it off. change the transaxel oil and filters at 200 hrs.

[@lawndudelawnmaintenancellc3203]

Well said 💯.......All about maintenance

[@eliteyardservices3634]

Hey this Tiffany from elite Yard Services. We are looking at getting the Bradley mower down here in Tampa Florida

[@lawndudelawnmaintenancellc3203]

Will definitely be worth it!

[@ramblin_man23]

How do you jack up your deck to replace blades? It's very hard on my Dixie Chopper stander.

[@lawndudelawnmaintenancellc3203]

Ramblin Man I place a jack underneath the front center edge of the deck by the scalp wheel.

[@ramblin_man23]

@@lawndudelawnmaintenancellc3203 I wonder if the Harbor Freight mower lifts are strong enough to lift the front of them up. They won't lift my 54" Dixie Chopper but mine looks heavier than a Bradley.

[@lawndudelawnmaintenancellc3203]

They should be strong enough. Believe Mitchell’s lawn care has one and lifted his 72” zk with it

[@stevenbrindisi4719]

The Fischer Harbor Freight lift works great for all our commercial mowers. But if you get the low profile 3 ton jack, you can jack up whatever wherever

[@ramblin_man23]

@@stevenbrindisi4719 that's the one that ended up getting and it works great.

[@reyeslawnservicellc2278]

How’s the mower holding up?

[@lawndudelawnmaintenancellc3203]

Mowers doing great. With all basic maintenance don’t have any issues minus what I pointed out in the video.

[@reyeslawnservicellc2278]

@@lawndudelawnmaintenancellc3203 Thanks, think I’m going to pull the trigger on a 52. All others competitors prices are ridiculous!

[@lawndudelawnmaintenancellc3203]

That right there is why I went with the Bradley I have a wright stander X I paid twice as much for and have no complaints. Think this spring I may add a 61” and possibly 36” Bradley

[@reyeslawnservicellc2278]

@@lawndudelawnmaintenancellc3203 Awesome brother! Thanks for replying back so quick. Much appreciated. Stay safe.

[@tonyslawncare]

Super cool

[@Walshslandscaping]

Nice mower

[@lawndudelawnmaintenancellc3203]

Definitely have great ROI just wish they had a couple features that other Mower brands have like bagging units and 72”decks

[@Cenlalowell]

My hydro pump leaked at 55 hours. Crazy to me but it's under warranty so hydro gear is paying for everything

[@lawndudelawnmaintenancellc3203]

Nicholas Jasmine I agree that seems early for that but I do like how they back everything under warranty but will suck once warranty is done.

[@ethansollars1367]

Can you leave a link to your hour meter you bought?

[@lawndudelawnmaintenancellc3203]

Ethan Sollars NKTECH NK-HS2 Inductive Hour Meter for Gas Engine Lawn Mover Marine ATV Motorcycle Boat Snowmobile Dirt Bike Outboard Motor Generator Waterproof Hourmeter (Black) www.amazon.com/dp/B073V4ZNRF/ref=cm_sw_r_cp_api_i_xWDwEbHKEZD0G

[@ethansollars1367]

Thanks

[@thekingscourtyardlawncares9324]

Yes sir

[@jeanalexandre1105]

Give it another year or two you will have engine option

[@lawndudelawnmaintenancellc3203]

I agree

[@mrpotatoheadracing]

I have a Vanguard on a different mower and have the same complaints. I can't figure out why everybody is so head over heals about these Vanguards. Kind of a junky engine to me...

[@MountainHomeSupplyCoowner]

They dont seem to be the same as the vanguards of the early 2000's. i had one of the true vanguard engines on an exmark or toro i used to have, and it was great. not loud and smooth. these new ones look like the cheaper briggs from the exterior, but hey, the gotta save money somewhere? they look like a great mower

[@lawndudelawnmaintenancellc3203]

I definitely like the Kohler and Kawasaki engines better so far.

[@robertwilliams7842]

Honestly these mowers Look like Junk and problems Mechanically in the long run.

[@lawndudelawnmaintenancellc3203]

I had these thoughts as well before purchasing. After owning 5 different models over the last 5 years I can say we haven’t had mechanical problems and these mowers are well built. As long as maintenance is kept up they’re great machines 💯