Worker Kunlun: The BEST Bolt-Action Nerf Sniper Yet!

[@BradleyPhillipsYT]

Where to find the Worker Kunlun: Out of Darts (USA): outofdarts.com/products/worker-kunlun?ref=RIa3bVI3vXYhUs Foamwork Adelaide (AUS): Coming Soon Blastertech (AUS): www.blastertech.com.au/product/kunlun-worker-blaster Blaster time (EU): www.blaster-time.eu/shop/worker-kunlun-bolt-action-sniper-blaster/?v=6cc98ba2045f Sabre 1.3gram Tdarts (USA): outofdarts.com/products/sabre-t-darts-heavyweight-short-darts-200-pack-1-3g?ref=RIa3bVI3vXYhUs Sabre BCAR (USA): outofdarts.com/products/sabre-metal-bcar?ref=RIa3bVI3vXYhUs

[@N1tr0_13]

What scope are you using in this video

[@sirblitzitv7643]

YES!!!!!!! been waiting for the accuracy test ^_^ great video !

[@beserkdonkey]

18:46 mans really hit me with rewind XD

[@AidenWiesel]

I see what you did there with the left handeds being left out. Great vid as always man!

[@framedmg9184]

Super hyped! Have one myself and can't wait to hear your thoughts!

[@dangermaus9253]

Has the catch plate on yours worn already?

[@framedmg9184]

​@@dangermaus9253Nope still shoots well with little to no wear

[@outbackoperator]

Just skimmed the top of my head with that opening shot haha

[@speeddarthun]

1.8x 300 mm spring: hit: 360 FPS. It's very satisfying....❤

[@ScottBionicBlasters]

That's definitely more like it.! Definitely the route I'll be taking. I consider bolt-action to be a target/distance type blaster.

[@AMSPawn06]

Great video as always! I'm so hyped for the perilous vid, just so you know there are also some metal bits in the works for it! (As soon as i get enough made to keep stock on them lol)

[@mhebert350]

Beside the mag release, what isn't already machined aluminum in it??

[@blendervendor2220]

I love how bradley describes 200~ fps as "low power like this" lmao

[@Xine1336.9]

And here I am downgrading a lot of my blasters to 130-150fps for the holidays with the family. 😅

[@ExpectingSafety]

I’ve been waiting for this review from you Bradley, looking forward to it! You got me into nerf, and I now have several worker blasters, Lonx, Lynx, and thinking about going into AEBs next. Ps. Have a great Christmas too! 🫡👍

[@mathiverse6715]

Kunlun vs Harrier?

[@mainstay.]

This was satisfying to watch. Haven't taken mine to a game yet but having a lot of fun 'plinking' indoors. I think the double sided tape on the back pad is going to work.

[@BradleyPhillipsYT]

That should work. Others have used a drop of hot glue.

[@CuBeR-bj7eb]

Bradley your amazing!

[@phillipdunn2508]

Was hoping to pick up a grey one for Christmas but they were out of stock locally before I could place an order. Will happily wait for Aus stores get them in.

[@bigfootnintendorazr]

Best bolt action, no contest.

[@atlasunit22]

awesome to see a commercial bolt action blaster on the market. yes the bolt action is not for everyone, but it requires some rhythm to get good and fast with it. still not faster than a pump I'd say. This is coming from a regular bolt action user.

[@pewi7468]

19:45 As a native Chinese speaker I would say the second pronounciation is closer tho

[@BradleyPhillipsYT]

@@pewi7468 if that's the case then a lot of people got it wrong 🤣

[@pewi7468]

@@BradleyPhillipsYT If we use the spelling system in Taiwan (注音), KunLun (崑崙) is spelled ㄎㄨㄣ_ㄌㄨㄣˊ . With ㄨ having a "oo" sound, like in "good". I can't find a comparable sound for ㄣ in English, that might be the cause of confusion. (ㄎ sounds like "K", a cracking sound. ㄌ sounds like "Le" in French) Edit: ㄣ can roughly be describe as making a "nnnnnnnnnnnn" sound with your nose

[@euroRCL7]

@@pewi7468 Singaporean Chinese here. And yes, 2nd pronounciation is closer. "Koon Loon" will sound quite accurate.

[@yerriff8115]

agreed

[@AUS-NewbiTLorD]

I replaced my Rubber Buttstock Pad with a Recoil Wrapover Pad meant for Wooden Stock Rifles. It fits fine if it is 13-14cm in height, 4-5cm in width. I already lost my Buttstock Pad and had to replace it.

[@adrianliew9288]

I applied double-sided tape to the rubber buttpad on my Kunlun

[@Battle_Bus1]

I would also add links for blaster time in the EU as they have the Kunlun available for preorder

[@Samuraifr-bs]

what scope are you using?

[@Masterchief-kj2jq]

Awesome video been waiting for this one for a long time have had my grey one with orange sabre b car since release and enjoying the shit out of it mainly going to be a plinking gun for target practice. Harrier and seagull are still my go to bun this is very fun for the sniper aspect just need a large area to use it properly hopefully those sabre parts come out soon definitely will get those to push ita limits!

[@ScottBionicBlasters]

If I'm in the market, I'm getting both.

[@grantponciano9386]

Pump action, bolt action, AEB's, 300 fps, how do you think the hobby will change in the new year?

[@BradleyPhillipsYT]

@@grantponciano9386 I can see more AEBs coming out and lower prices for them. Manual springers there's not a lot that hasn't been done.

[@sethsnerfun]

All I wanted was Brad to shoot this thing before I made my purchase, and I’d say I can officially make decision to do so now 😂

[@turboz551]

I am lucky to get a black one as it sold out fast and boy it dwarfed all my collection including the Harrier. My only gripe is that the prime is kind of vague and spongy with no clicks whatsoever which made me miss the prime a few times thinking it is catch but actually not. Also it does not come with a retail box like other Workers so I am a bit disappointed seeing a box of plain cardboard. May be they will have one printed on a later day when production catches up. To me it feels pretty heavy and huge especially with a bipod fixed at the front. Overall an excellent sniper if you have all the time in the world to steadily aim your shots. Otherwise if fast pace action is your game then a Seagull or even Harrier with a short barrel will suit you better. All in all Kunlun is truly amazing and next level.

[@paullassahn4641]

Great vid! Would have been interesting to see the accuracy without the worker pcar to see how effective it is

[@johnmurcott1273]

It would have been shit without the rifling. We know rifling works and if its included in the box there's no point testing without.

[@Rose_Butterfly98]

The one advantage this has for me is that it's easier to get than the harrier where I am. I guess I'll have to deal with the bolt action then. Then again, if I was getting a pump action I'd just get the lynx lol.

[@NateBenson-s6i]

I wonder what the ceiling is on it when it’s all the way maxed out.

[@BradleyPhillipsYT]

With current internals about 300fps, with upcoming Sabre internals it could be pushed a bit further.

[@grahamkane6280]

​@BradleyPhillipsYT Do you know what it is that Sabre are bringing to the table.....😁

[@BradleyPhillipsYT]

@@grahamkane6280 catch, plunger and possibly an upgrade spring

[@dangermaus9253]

350+ with a cut down 1.8. Could probably hit 400 with upgrades and tinkering.

[@Xine1336.9]

If it's true that the 550mm barrel is too short for the plungertube volume then a longer barrel will also add a few fps.

[@AaronPlinks]

Yea it's "koon loon", not "kwin lin". In English, "koon loon" sounds the closest to it's Chinese pronunciation in hanyu pinyin. I feel a strong need to correct this as some prominent KZbinrs have already pronounced it wrongly and should not mislead the community. Otherwise, great video!

[@BradleyPhillipsYT]

@@AaronPlinks this seems to be a point of contention. Out of Darts even went as far as putting it in the product description.

[@AaronPlinks]

@BradleyPhillipsYT I am Chinese. This is my native language. Trust me, I am right. 🙂

[@killthemwithfirelol]

​@@AaronPlinks "trust me" is typically the fastest way for people to consider you wrong automatically.

[@Daniel-fm7yh]

Nice review! Keen to buy some T Darts once they become available in Australia

[@dangermaus9253]

The 1.1s have been a available for a while now.

[@Daniel-fm7yh]

@@dangermaus9253from where?

[@ajax8448]

Formwork Adelaide

[@adammoon2959]

CAN THE Worker 8 DEGREE BEARING SCAR MUZZLE, DO BETWEEN 200 AND 250 FPS. IF NOT, WHAT DO YOU RECOMMEND. THANKS.

[@jolemaire6629]

This will be my best plinking toy next summer.

[@ulungprabowo]

Very impressive, anyway that is really a proof that high quality BCAR does very important, but too bad it is very expensive lol.

[@BradleyPhillipsYT]

The plastic one still works really well though!

[@deathkiller0x027]

Hey uh i wanna ask that is it still a good choice to get cheetah 2.0?

[@DEVILISHLY_DELICIOUS]

The harrier is very long. I'm 6 ft tall and notice it very much. That's why the best blaster I'd recommend is the seagull. If it's outside of your price range, I'd recommend the xshot longshot. I'd never recommend a bolt action blaster of any kind.

[@anvu27257]

This with a 1.8x300mm spring from the swift would be really interesting, especially with its different ergonomics and bolt action over pump action function. AFAIK the swift does have a slightly higher plunger volume, but idk how much that translates to fps compared to the kunlun. My swift clocks in around 400fps with the 1.8 spring, longest 550mm barrel and plastic OEM plunger (switched/rearranged some o-rings, used super lube). Very uncomfortable to prime and completely impractical to use past 20 minutes in this setup though.

[@BradleyPhillipsYT]

I wouldn't go putting a larger gauge spring in it without also upgrading the internals to survive it. Sabre are making a CNC catch and plunger.

[@frogsbutfrogs]

when we getting the perilous review?

[@BradleyPhillipsYT]

Next

[@frogsbutfrogs]

@@BradleyPhillipsYT nice, hear you had a little issue with the spring cap at the back, is everything on that good?

[@BradleyPhillipsYT]

​@@frogsbutfrogsthe issue I had won't be possible after a small tweak to the design going forward

[@frogsbutfrogs]

@BradleyPhillipsYT great to hear

[@CaptainShotgun007]

This is an epic blaster, but I'm still calling it the Koon-loon 😂😂

[@BradleyPhillipsYT]

I'm still wondering what happened to the bird naming scheme

[@CaptainShotgun007]

​@@BradleyPhillipsYTikr this could have had a good name, idk what but it could have been good.

[@AnTran147]

They should've called this the Albatross

[@alexanderstraer953]

Hey, can you please tell me which scope do you use?

[@BradleyPhillipsYT]

I used a Holosun HS506 for this video

[@Brantleyvids-f4y]

i wish i could go to Australia

[@cheapbeer]

It is pronounced as Kwoon Lwoon

[@BradleyPhillipsYT]

That's what I'm hearing. Someone should tell Luke to change the product description.

[@kazefw3834]

Insert " ARMOR PIERCER ".mp3 here 😂 Also, holy how jn the hell you hit that shot in the intro

[@sponger59381]

Detroit: Become Australian

[@lyonel4044]

Bummer no modding to the max 😞

[@BradleyPhillipsYT]

Will require CNC parts from Sabre if you want to use higher than the included springs.

[@lyonel4044]

@@BradleyPhillipsYT everything is metal already. A bigger spring with a diameter that almost equals the plunger tube will do the trick. No need to be bothered with the max diameter of the spring guide, just go outside of it.

[@BradleyPhillipsYT]

​@@lyonel4044 the included catch will likely wear down if you use heavier springs like that

[@the3rdperson2]

How does it compare to the realm?

[@BradleyPhillipsYT]

Doesn't make an annoying scratching sound when you use it

[@Assman12183]

Better than a Sabre?

[@BradleyPhillipsYT]

Sabre don't make a bolt action, so every Sabre is more practical than this.

[@Assman12183]

@@BradleyPhillipsYTmy bad, thanks

[@MisterMeanor]

Is it better than the M0053-1?

[@BradleyPhillipsYT]

@@MisterMeanor why would you compare a for fun Mega blaster against this?

[@MisterMeanor]

@ I seem to have stepped into a social trip-mine, here.

[@MisterMeanor]

To answer your question, you’ve used both blasters and you would be an authority on which you liked more.

[@BradleyPhillipsYT]

The Kunlun is far more practical

[@sweetlikechocothai]

I’m a lefty but this thing looks nicer than anything Worker has ever made. The stock and check rest are great. Scope needed.

[@dangermaus9253]

Can you stop calling the T-Darts 1gram when they're not. They come in 1.1 and 1.3

[@BradleyPhillipsYT]

@@dangermaus9253 1.1gram then

[@MrFreefonix420]

I always thought this was overpriced, needs to be 100 less in my eyes