Monster magnet meets monster magnet...

Is it possible to combine two giant 6x2" neodymium magnets to one single 6x4" without destroying them? Let's find out!
This video is sponsored by brilliant.org/Brainiac75/
One of the magnets was donated by: www.magnetportal.de/
Missed one of my videos? Go to: / brainiac75
FULL MUSIC CREDITS
Time code: 0:00
Long Note Three by Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/b...
ISRC: USUAN1100424
Time codes: 0:34 + 8:06
Relaxing Piano Music by Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/b...
ISRC: USUAN1500075
Time codes: 2:21 + 3:18
Consequence by Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/b...
ISRC: USUAN1100283
Time code: 6:35
Sunshine by Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/b...
ISRC: USUAN1100517
Time code: 9:40
Peace of Mind by Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/b...
ISRC: USUAN1200099

[@etz80808yy]

I really love your videos! They are really interesting and fun! I made the spanish captions in "Monster magnet meets servers...". So I'm also gonna do spanish captions with this one! 8)

[@brainiac75]

Aw, that's awesome! I was just thinking the other day that I haven't officially thanked all the people that translate the subtitles on my videos. Thank you very much! It means a lot to my viewers, my channel, me etc. I know it takes some time. I did the English and Danish subtitles for this one :)

[@etz80808yy]

Yeah, it takes a lot of time, but it will be worth it! Also thanks for the pin and the heart! ♡

[@poetranoegraha6641]

Juegabenstone ps : no he didn't heart you.

[@xivix6710]

You're a great guy !

[@KamiZi0]

Pins comment but no like?

[@bobchong]

Next challenge: remove the two magnets apart

[@RabeaHussain]

impossible , i have 2 n52 2" by 1" it takes me 10 min to separate using wrenches and a lot of hand injuries , then they got suck together again , now i don't want to bother

[@claudiahalmel6771]

@@RabeaHussain its not impossible Magnets lose their strength if you heat them up you can eaven permanently remove their magnetic field if the heat is to big but im sure that it is impossible without permanently weakening the magnets or eaven destroying them in the prosses

[@megonggaga8046]

Chainsaw goes brrrrrrrrrrrrrrrrrrrrrrrr

[@pixelparasite829]

@@claudiahalmel6771 I'm pretty sure that he doesn't want to destroy the extremely expensive magnets.

[@tigerpresentationsproducts425]

Use a lighter and a chisel

[@ArmasLahtaaja]

So this is why my compass in Finland is now pointing to Denmark.

[@valaha]

lolse

[@_EggsBenedict]

lol, same here XD

[@user-op5ki3iz7h]

Sama

[@sarik2843]

ArmasLahtaaja no voi pewkele

[@nowonmetube]

ArmasLahtaaja I thought they were German...

[@amt1710]

I would love to see these magnets assembled on some sort of track that allows them to slam into eachother at full force.

[@prat751]

Wouldn’t they just shatter?

[@maryjanedeoferio6790]

Yes it would actually be shattered

[@plqtypus]

they would be so expensive and they would shatter

[@the_undead]

If you want to spend $1,000 plus dollars on that and then upload it to KZbin I don't think anyone would complain because it would be quite the thing to watch.

[@Noone-hk1vf]

Magnet train

[@greezyhammer764]

Have you looked into using a hydraulic fluid as a way to slow down the magnets coupling? Thick acrylic cylinder to handle the serious pressure, bore it out to magnet diameter. Bore and thread a small hole at the bottom at the height of first magnet, install a brass valve. Insert first magnet, fill cylinder with hydraulic fluid, insert second magnet. The fluid will get through the sides of top magnet as it descends, but I think it's worth an experiment.

[@nou4898]

galaxy brain

[@robcoastalga8279]

That was my idea. Using a very viscous liquid.

[@babybirdhome]

Why not just use a copper tube about the diameter of the magnets?

[@fredthegraycatt]

Or instead of a messy fluid, just use dry ice?

[@dwmaddawgs]

@@babybirdhome that copper might start glowing with the electric field created

[@Rainy_R]

0:54 My brain cells on a hard test

[@radioactivefish9755]

Haha you just earned a sub

[@Rainy_R]

:O Thx

[@radioactivefish9755]

:D Np

[@aiden-qk6fs]

Here's another sup

[@aiden-qk6fs]

Sub

[@mustafaGeezer]

I kinda want to see them get seperated

[@accckiy]

easy, just put in a fire. But after you can frow them out. That will the last time you see them working.

[@red__guy]

Mustafa Gezer Im more afraid to

[@thegamingpikachu6784]

All you need to to is get a hydrolic press xD

[@red__guy]

The gaming pikachu Its time for collaboration, visit finland.

[@Sorestlor]

Yes put magnet next to giant metal press.

[@tcheev6306]

The legend says that those two magnets are still stuck to each other till today :)

[@jessicapeterson9711]

Lol

[@guynorth3277]

How are you going to get them apart

[@PrivateFlown]

@@guynorth3277you dong

[@PrivateFlown]

don't *

[@guynorth3277]

@@PrivateFlown; One cannot ask a question

[@markblamer4969]

how about a tube the diameter of the magnets perforated along its length with tiny holes. fill the tube with crushed ice, as the ice melts the magnets move closer together..

[@cola98765]

this... is actually interesting idea it would allow combining magnet of any size as long as you have tube just a bit bigger than two magnets.

[@chrism340i]

Wouldn’t work as once they get close enough the magnet force will force the ice out at extremely high pressure. Essentially it could cause the ice to melt

[@Ikxi]

@@chrism340i So the pulling force is so strong that the ice gets crushed so hard the force behind it is enough to bring the ice to a higher temperature? I would really love to see this in some thick acrylic tubing with smaller magnets than shown in the video but still strong ones

[@chrism340i]

@@Ikxi yes, think of it like a hydraulic pressure. High pressure=heat

[@joerivankallo]

Safety first boys! Helmet, eye protection, gloves, etc. and then walking around on your socks...

[@todayonthebench]

@@benoitcollignon735 A lot of modern security boots have plastic/fiberglass/carbon-fiber instead of steel reinforcement these days. Main reason is that a steel piece isn't as strong as the other options. So the rating of the shoe gets better with the non metallic materials, and they are lighter, and at times cheaper too.

[@saltysoysauce954]

Unlike me, magnets aren't attracted to feet!

[@matthewjackson1661]

@@todayonthebench that and if the metal gets damaged you may lose your toes due to the metal crushing them

[@todayonthebench]

@@matthewjackson1661 Yes, it tends to be easier to heal severely crushed toes and fingers. But if a piece of metal is bent around them like a candy wrapper, then it generally ends up as a lost cause. Though, the boots should be rated for the environment one works in. (ie, they shouldn't get crushed to start with...)

[@gazz9995]

@@benoitcollignon735 well just some normal trainers would be ok wouldn't want to get a splinter kicking that wood.

[@E-0921]

Now throw it inside a server room and watch the magic happen!

[@AubreyMK]

move the magent to Epic games server rooms quick!

[@yamahara5179]

@@AubreyMK 2 IQ

[@AubreyMK]

@obonk gang how dare yopu insdut my inselagent, mu IQ is -14 andn musthc hfoher tharn yours

[@Jer0867]

That's evil, dude! Lol!

[@harryb7505]

MeKillYouTo 10000 IQ play

[@Dennis4official]

Watching this channel inspired me to get into magnets and now I have a massive 45,40 mm neodymium magnet which has been used to do all kinds of things!

[@3-MPH]

like what?

[@okaygerepied5388]

Imagine putting this in a MRI 💀

[@CallMeZeroxx]

death.

[@viacomsspy5439]

Okayge

[@caeruleum780]

“No humans or magnets were hurt during the meeting of the magnets”

[@420milesmemes]

Trollol

[@PantsYT]

"Some plastic was though"

[@Kuhtlass]

Imagine having a steel plate in your head and playing with these.

[@fahreza4620]

BONK

[@pixelparasite829]

You would be dead. Period.

[@jakebingham8555]

*Stan Ford intensifies*

[@annickgunes8834]

@@jakebingham8555 oh no

[@parlodadgood3538]

kzbin.info/www/bejne/pZOWXqpvl9Z2ntE

[@wilbur9416]

Magnets are fun. Now you have the ultimate fridge magnet

[@Pixel_Forge_]

This video has given me a minor fear of magnets.

[@dazedandamused2491]

If the magnets did “smash” together would it actually shoot outward, or would the strength of the magnetic pull keep it in a shattered mess? 🤔

[@rustable4165]

they would most likely fly out

[@rustable4165]

@@tearex7023 ok

[@shathisvaran1026]

I believe they’ll broke in some pieces and fly together

[@AmmarAbdSaleh]

I think once they break they wont be magnetic anymore

[@ashdoesstuff3575]

@@AmmarAbdSaleh that isn't how magnets work. I actually own a neodymium magnet that was broken in half and both halves still work.

[@deadchanneldontwatchit4697]

Key words: • dont • try • at • home

[@flyaround312]

•or •anywhere •else •unless you're a professional or a KZbinr

[@aisfor1]

•im dracula •blah •blah •BLUH

[@vond5829]

Well if you got enough money to buy one

[@joksizantos7520]

I cant read the first bullet, but as long as i follow as many of the keywords, nothing will go wrong - try, at, home

[@joynigam4151]

What are you doing here Darryl?

[@kungfutuber]

Great achievement! I imagine the sound you heard towards the end was the friction between the magnet and the plastic as they slid across each other.

[@babitarani1913]

When a science video has weight instead of mass

[@SubscribersGoal-eg4iy]

0:54 when working with magnets becomes so usual your eyes begin to become magnetic 🧲 👀

[@user-bl7fm8bz4l]

😂

[@noprofilepicture205]

😂

[@ggsap]

😂

[@jiritesarek7601]

bruh /:/

[@IntergalacticVoid]

😂

[@joec853]

2:10 *shaves off warning label*

[@erixccjc2143]

more like 2:06

[@Ecktor]

Wrong time code moi

[@itsbonkerjojo9028]

@@erixccjc2143 yep

[@itsbonkerjojo9028]

@@Ecktor he should be in jail .

[@parlodadgood3538]

kzbin.info/www/bejne/pZOWXqpvl9Z2ntE

[@williamburroughs9686]

I think the best part was finding out that magnets can be very powerful. Before seeing this video, the most powerful non electric magnets that I have seen were rated for 500 pounds. But to see this at over 2600 pounds is amazing.

[@aidinexmachina4232]

I was expecting Stoner Metal. I still wasn't too disappointed.

[@520azdc]

Haha! I was just wondering how many stoner rock fans ended up here by accident.

[@BAPEMCM]

0:54 is that engineer from TF2?

[@AbdAbdAbdAbd]

DISPENSER GOING UP!

[@Deveus-et2tx]

SENTRY GOING UP

[@ActiveTerrorism]

Sentry down!

[@SD_N45]

Teleporter down!

[@D00Mthevillain]

Bruh why is he cross-eyeing

[@ElectroBOOM]

At the end you magnet might be turning towards Earth's magnetic field too

[@Cec1nator]

ElectroBOOM that's what i thought too

[@anchoriticparliament6343]

That's what I thought was going on at first.

[@blury6445]

ElectroBOOM hi i love your videos Can i get an osciloscope Plz anser if i can😂

[@ozgunkara1930]

I love you and your channel man keep up

[@theschnilser7962]

Didn't expect you here xD

[@lasagnapig630]

imagine returning them to the manufacturer like that lmao

[@kato_dsrdr]

"Neodymium magnets are not toys" Damn, these super strong magnets are my dream toys when I was a kid..

[@nbacivilnba8950]

0:54 OMG Look at his eyes! such is the power of this magnet!!! 😱

[@rafikamin6617]

That was two separate video

[@georgedog326]

@@rafikamin6617 he was joking

[@TheTrueC64]

Lmfao

[@jalliboy]

@@georgedog326 cant fix stupid🤣 you cannot help a stupid person understand stuff. Haha

[@samyakinho]

@@rafikamin6617 r/wooosh

[@darkflame_reaper1812]

Asking someone to try and pull those magnets apart, would be like asking someone to pull Excalibur from the stone lol

[@Silentguy_]

Eric Bernik Only issue is that they would “pop” apart and be slung towards the cars and would probably slam into the body with the force of a semi truck

[@jazmihamizan4987]

@@Silentguy_ smol price to pay go scientific salvation

[@Self-replicating_whatnot]

Heat up and gently separate?

[@ryanpaloma4951]

Caliburn*

[@dark6.6E-34]

@@ericbernik4695 wouldn't work they are brittle

[@hughmungous6487]

Now you just need some Monster Magnet playing in the background

[@bluegizmo1983]

Geez, that's like working with the Demon Core!

[@StarFoxCodeTJ]

I'd say you have nerves of steel, but that's not possible because steel is ferromagnetic and would be pulled right out of your body. Therefore you must have nerves of pure graphene.

[@coolguy284_2]

He has iron in his blood, but it is not affected.

[@cyberyt2632]

@@coolguy284_2 It is effected but the amount of iron in you blood is so little that your blood is barely effect by a magnet at that level.

[@wompastompa3692]

This new behemoth will invert a compass at 209cm but fail at 210cm.

[@gat0anonimo]

"Monster magnet meets monster magnet" then you have one extra big monster magnet

[@andresbravo2003]

This brutes the force between the two strongest magnets. I still recommend and remembered 5 years ago.

[@aloter1680]

7:30 I'm stressed, i want to separate them 😅

[@corvetaumbr2410]

Now its practically impossible to separate them...

[@user-tm8us2jo2s]

Me too

[@atmos_360]

Same : (

[@Prozakc.O]

Heat them up

[@qrtoryx1765]

@@Prozakc.O I think if they would heat them up they would lose their magnetic properties

[@bleachOO15]

How about putting a big ice cube in between, and wait it to melt.

[@tomf0olery]

the ice cube would be crushed

[@trydodis690]

and the magnets will shatter or chip

[@NicolasMorus]

@@trydodis690 the key word was 'big'

[@trydodis690]

Nicolas M I understood that, I’m assuming his idea was to have a large piece of ice that would slowly melt until they’re in contact with each other but that isn’t going to work. There will be a point where the ice is small enough that it doesn’t have the strength to support the attraction of the magnets. It’s not as if the ice is going to gradually break, it will be a spontaneous event and the magnets might shatter with what is left of the ice.

[@LightningShiva1]

@@trydodis690 ya

[@raybinzay1913]

his sound like man in stronghold videogame

[@dvk578]

Him: "These magnets are NOT toys...." "Why are you doing this?" Also him: "Well it started out as a joke..."

[@ghostassassin1107]

Now we wait for the day when you have to separate them again.

[@PedroSantos-ru9uw]

are you think from wom2?

[@subswithnovids-yl6mw]

A magnet: *finally a worthy opponent our battle will be legendary*

[@hgmercury7279]

witch one is saying it? the original or the new 6x2 or the new 6x4 saying to no.1 biggist magnet he has or that no.1 biggist one saying to 6x4

[@subswithnovids-yl6mw]

Its 2

[@formalbusinessonion7265]

Neodymium Magnet: "Where's the worlds strongest magnet?" Fridge Magnet: "How do you know you're not looking at it? " Neodymium Magnet: "Haha, you think I'm a fool? I know you're not the strongest magnet NONE OF YOU ARE! I heard they appeared from the ground in a electric field of magnetism. " That one random ass magnet that everyone has for some reason: "Neodymium? " Neodymium Magnet: "So that's its name? Neodymium. Finally, a worthy opponent. Our battle will be legendary!"

[@aeronaut7346]

Kung fu panda reference 👊

[@parlodadgood3538]

kzbin.info/www/bejne/pZOWXqpvl9Z2ntE

[@scarletevans4474]

I was so afraid about the final two "clicks" between magnets, when they first touch and then when the plastic gets removed, could damage them. Glad that nothing like this happened! 🙂

[@oddlycaspar]

Weld them together fully and make it a permanent 6x4? That would be friggin' AWESOME

[@mikeselectricstuff]

How about using a block of ice to bring them together

[@migatoesungato]

How?

[@Autunite]

Place the magnets with a block of ice between them, let it melt so the magnets move slowly towards eachother. However the ice could chip or explode under the pressure and the magnets would damage eachother.

[@bloeckmoep]

Ice melts under pressure. You can observe this with a thick ice bar and a wire loop with a weight attached to it. The wire will slowly cut through the ice bar. With those magnets it will go faster, the closer they get, since the pull force rises.

[@fubisroc9673]

Someone had a similar idea with a PVC pipe filled with water. The only drawback there being the pipe would have to be the PERFECT diameter to control the flow of water around the magnet. If you replaced the water with a cylinder of ice, the PVC would prevent an explosive blowout and almost any chipping/cracking would be repaired by the compressive force on the ice.

[@JohnyAngelo]

Still it would be interesting to see. probably not at home tho

[@MirageUchiha]

Nice. 👍🏽 Now take them apart.

[@eveomatic2427]

Slide them off

[@GalaxyCloud]

@@eveomatic2427 is WAY harder than it seems

[@alexilaiho1st]

Leak false info claiming one of them cheated on the other, then hide behind a solid wall.

[@shanespicer4673]

RIP the plastic wedge

[@lukeslife3958]

Legend has it he is still trying to this day

[@CAXRAMEDIA]

I love this video. We need more... like this 😁

[@joshuameredith4602]

6:00 your guess is as good as mine: I think it was the friction between the magnet and the plastic, I don’t think metal/magnets and plastic don’t have much friction, but the fact that the magnet was being pulled so much. It just pushes the plastic down so much they’re starting to have friction.

[@GhostOdyssey]

I was literally on the edge of my seat, slowly edging away from the monitor, grimacing with trepidation!!

[@ramrod126]

Glad I wasn't the only one.

[@fangthewarrior]

Towards the end I had guessed that it would 'eat' the wedge

[@cheedam8738]

If Legos had Curse of Binding, these 2 magnets had Curse of Binding X.

[@James-wd9ib]

Neighbors: "I swear to god my phone's compass is broken"

[@Streamtronics]

Maybe you could've lubed/waxed the slide somewhat, just for easy of combining. But looks good!

[@johntheux9238]

I think the coefficient of friction decreases as the pressure increase. When all the magnet area touch the plastic part the pressure is low and the coefficient of friction is high. When only the edge of the magnet touch the plastic part the pressure is higher so the coefficient of friction is lower and the magnet slips. For the noise: imagine that the surface of the plastic part is a brush: when it adhere to the magnet because of the pressure it will deform to follow the point of contact. When it finally detach it resumes its normal form making vibrations. When the forces involved are low, the vibrations are ultrasonic and turn them into heat, when the force is high like in this case or like when something is cold rolled the vibrations turn it into sound.

[@NWRefund]

That sound is the vibration of the material as it recovers from elastic deformation. The magnets are applying two tons of compressive force and rather a lot of friction. As material slides out from between the magnets, it's popping back to where it should be, causing the vibrations. TLDR: It's not moving smoothly.

[@Arheisel]

I'm wondering why he didn't applied oil/grease/lube to the wedge

[@johntheux9238]

Yes the noise is the same than when I cold rolled aluminium sheet.

[@Sentieantbeing]

To this very day those magnets are still stuck together

[@DantE-nq5zf]

No magnets were harmed in this video🤣🤣😂

[@tylerstanford7228]

Now get them apart

[@Dalen22_W]

Tyler Stanford lol

[@onlymeok]

Permanent magnets are adversely affected by high temperatures.

[@hariyanuar8222]

Easy, you can weaken their magnet power by burning or throw them until the magnet power is bearable then get them apart.

[@pyro1324]

Harry99, Throwing around neodymium magnets will just get you a mess of crumbles

[@jamesdelatorre5634]

Tyler Stanford I

[@nickstick4756]

now the question is, how do you get them separated?

[@XX-tb1fe]

I can think of 3 ways. 1. Place them in an oscillating (constantly changing) magnetic field 2. Start hammering them 3. Put them in a furnace

[@Tenskwatawa4U]

You don't. EVER.

[@BowTie8Bit]

Create two magnetic fields, one for each magnet, that will generate a repulsive force between the two, just enough to get a wedge in. Or maybe strong enough to propel them away from each other.

[@rhyzvanic3660]

Generally you don't But an idea could be to put them into two separate panels flush together, and start pulling those panels away from each other while the magnets are snug together. Good luck having enough power to separate them though!

[@Night-FuryDreamer]

Keywords: You don't.

[@gerogefinkle4764]

Noise looks like it was caused by a frictional slide of the magnets on each other as they aligned themselves together, which is a lot of friction, on a tiny surface area, over a tiny fraction of time. You could have probably seen the heat generated on an IR camera, but that's an experiment for another video.

[@solidmage]

This new behemoth will invert a compass at 247cm

[@adtc]

Formula or guesstimate?

[@nexusxe]

adtc it's a guasstimate ok I'll leave

[@Supermario0727]

If you thought bringing them together was hard, imagine how hard it will be to separate them.

[@vineheart01]

Magnets of that size are straight up terrifying. I only mess with magnets for model kits so the largest ive gotten is 1cmx2mm and ive shattered so many of them by not thinking about it and they just slam into something metal. I dont even wanna touch a magnet this big.

[@mastershooter64]

Time to build a particle accelerator with permanent magnets lol

[@Sausketo]

now you just have to make a contraption to separate them

[@kielvincenta.k.aultrainsti6523]

1:26 what if we use 100% of our brain?

[@GRTechs]

😂😂😂😂🤦‍♂️

[@Jeeves_0]

?

[@Sweet_Jelly39]

I don't see any problem...

[@banesrb]

There's no need for glue

[@doublemosasaur5091]

Stfu if you have nothing to do with engineering that glue is needed to strengthen it idiots

[@SirFloofy001]

6:00 thats the sound of the magnet squeezing the plastic wedge so hard that it vibrates as it slides like a dry squeegee.

[@ryanhegseth8720]

I watched this video for a while before I realized what you were even trying to do… it was when I saw the two magnets together and realized how hard that would be without destroying them.

[@aarongreenfield9038]

That sound was the irrevocable warping of the space time continuum, but luckily the damage is limited to merely our own Galaxy, so that's a relief!

[@KClO3]

that refrence lol

[@aarongreenfield9038]

Mouze. I was wondering if anybody was going to catch that;-)

[@well3034]

I give up, where is that reference from??

[@aarongreenfield9038]

Well, any luck yet? I can give you a hint.

[@aarongreenfield9038]

Well, hint, crazy hair, and used pinball machine parts!

[@ZeroWalker26]

I would not wanna take apart does 2 magnets. Awesome video.

[@calebsherman886]

Zero Walker It would take thor to seperate that.

[@2ooo996]

No, just use a spoon, that'll work

[@dandanthedandan7558]

2,000 .- No, a hamster would do it...

[@corwinhyatt519]

@ Zero, it is possible but I think the equipment needed would be very expensive. It would need some sort of split grabber that could exert a bit over 2 tonnes of force separating the magnets while retaining them and not damaging them.

[@dandanthedandan7558]

Corwin Hyatt Do those exist?

[@petergriffffinfvckyou]

one of the first videos i ever watched on youtube

[@LockDown13]

Legend says that if 10 monster magnets meet at the same time, a black hole will form

[@Thelegend-db8qu]

Thumbnail magnet so strong its pulling one of his eye the wrong way 🤪

[@LoginLogout]

Lol haha

[@marspotato]

Its not funny, what if its a medical condition

[@stormdivision617]

@@marspotato its not he edited it this way

[@marspotato]

@@stormdivision617 thats some weird editing to do

[@Amnesiaaa06]

Its vfx dude

[@whitedemon8953]

I never even thought that magnet could be this terrifying 😂

[@ussessexcv-9189]

This isn't even the final form of magnets, because technically electromagnets are still magnets and they can be many thousands of times more powerful than even this behemoth that was created.

[@ms.jotukiller2846]

@@ussessexcv-9189 *yup, we got the biggest magnet under our feet 😂*

[@alienfromarea-5196]

@@ms.jotukiller2846 average fridge magnet is more powerful than earth

[@ms.jotukiller2846]

@@alienfromarea-5196 oh right I forgot, thanks

[@ninjahunterx7497]

You guys are thinking inside Earth, and forgot the most powerful magnet. The Magnetar! Which is a Neutron star type with magnetic field of quadrillion times the Earth. This is so strong that, it will tear off atomic bonds (due to electrons in atoms) from about 1000 km away from its surface! (It's like a no matter zone).

[@tonyha3827]

Question to you. If two magnets attach together, do they have combined magnetic power increase or do they lose some power by exerting pulling power between them

[@NotBroihon]

The power increases.

[@ezrakirkpatrick5365]

Actually when you spun the magnets around on the table, they preferred a certain polarity. It's possible they were reacting to the earth's magnetic field and not fully the table, given their strength

[@deaconbryant]

try a negatively charged monster magnet and a positively charged one and see if you can levitate off of them

[@brandondannys-menary3678]

Deacon Bryant hell yeah

[@idrilllsrp8508]

Sounds fucking dangerous, he should do it

[@akaredcrossbow]

Deacon Bryant I think the top magnet might flip and then shatter!

[@blobby2127]

He would need a crap load of counter weights to keep the magnet from flipping. It might. It even work without flipping.

[@Nicholas3412]

Some Russian guy made a car suspension out of that

[@toster387]

congratulations, you just recreated putting two 2×2 Lego pieces together but with magnets. no way in hell they're going to come unstuck.

[@811brian]

1x2 flat tiles are even worse!

[@Jpx0999]

I did it remove it the 2x2 legos stucks A lot of times Its INCREDIBILY painful and my nails are now made of steel Since whatdont kill foi Make you stronger But is possible

[@perhapsYoYo]

you know what sucks more? two 1x1s stuck on eachother

[@parlodadgood3538]

kzbin.info/www/bejne/pZOWXqpvl9Z2ntE

[@cheez-itdestroyer]

@@perhapsYoYo they can spin some and have corners over making them easy

[@cyrusvans1524]

0:54 When you start an arguement but hes got a valid point

[@papafaya3478]

0:53 an eye is shittin and the other is looking for toilet paper

[@petrescuework-difficultcas6581]

4:24 that helper is just a behemoth pulling the whole apparatus and his companion over the carpet 😳

[@itsbonkerjojo9028]

That's not helper duffer.

[@Weespud70]

@@itsbonkerjojo9028 your profile pic made me think a hair was on my phone

[@itsbonkerjojo9028]

@@Weespud70 so . Shud i dance

[@ARYAN-gw6jl]

@@itsbonkerjojo9028 should*

[@Flesharrower]

Nothing like being safety conscious then doing everything in your socks...

[@MAGGOT_VOMIT]

Would be much easier like I did years ago with two 4in magnets. Sit one on the floor N side down, place a 2-3ft long pvc tube (with 1/4in holes drilled in it every couple of inches along the tube), over top of the magnet. I had made a jig out of 2x4s, hole-straps and zipties to hold the tube upright and straight. Fill the pvc with crushed ice place the 2nd magnet in (N side down) and let them slowly come together. The holes in the pvc will let you know its progress.

[@marveloussoftware4914]

How did you separate them? Or did you?

[@MAGGOT_VOMIT]

@@marveloussoftware4914 No I didn't separate them. Engineering had come to me as they had already shattered one pair (luckily no one got hurt) and damaged another pair. They were supposed to go on a new fast CTL (cut to length) machine design and found they didn't have enough levitating force with a single magnet to float the cutter assembly.

[@johnc.hammersticks]

Magnets like that are super dangerous, amazing work paring them. I wonder if they went pole to pole how high would it repel instead of attract? Might shoot through the roof.

[@marveloussoftware4914]

The repelling force is similar to the attractive force + or - gravity. So sorry, no magnets through the roof.

[@johnc.hammersticks]

@@marveloussoftware4914 attach one to a tube and then slide one in and see what it will do from a short trip down, I'd watch that.

[@Cec1nator]

for a second i thought your eyes went berserk haha great vfx man

[@simontay4851]

They did.

[@Asu01]

Great, now separate them..

[@oofboyee1291]

Labs harder than splitting an atom

[@LegendTyrant]

Labs No can do...

[@desperitisgotgames252]

Labs Just heat them up.

[@adityabanerjee49]

+Finish Him! the will get demagnetized

[@joshmaceachern7383]

Aditya Banerjee I think that was his point...

[@user-kh6md3ij2r]

Your eyes bro hahahaha that is gold. that made my day

[@njm1971nyc]

That little piece of plastic stuck between the magnets would drive me nuts 😆 My method, not that I plan to do it...but after giving the pinched plastic some thought, would be like this: Make a tube the exact diameter of the two magnets. Place one magnet at one end. Make a magnet-shaped puck out of dry ice (frozen CO2), place in the tube. Next add the second magnet. The puck would gradually turn back to gas, slowly bringing the magnets closer together, until finally completely joined. No solids at risk of being trapped! 😊 Might be worth a try!

[@njm1971nyc]

...and reading though the comments, I realise someone else already thought of this. Although theirs was a joint effort ☺️

[@MyWasteOfTime]

Who would have thought I would enjoy watching two men put magnets together on a Friday Night for 10 min :)

[@tEmMiEyAyAyA]

Hey it's friday night for me too

[@ThePyrojen]

So much for safety... you didn't even wear shoes

[@zeldaprincessgirl100]

Pyrojen Ikr 😂

[@MDTravisYT]

Omg never noticed 🤣

[@compwiz00]

Maybe he only owns steel toe boots, which could become awkward.

[@MrGovtCheese]

They both become mutants... Magnetoe

[@NPCSN]

The eyes... 🤣🤣🤣 I couldn’t stop laughing. 😂😂😂

[@Yahooligan72]

😅👍

[@vinitaverma8407]

Disclaimer: No humans or magnets were harmed ... Except yellow 🟡 plastic Lol

[@mjvlovescbv]

I once put two refrigerator magnets together

[@robmcfarlane3602]

Man.......you're the craziest !

[@landofowl3800]

You Fool! *YOU’LL KILL US ALL!!*

[@briannab1598]

😂😂😂

[@French_Cries]

Absolute mad lad

[@andreidicu2882]

This is what happened to my spine

[@Silexium]

A bit late on this one but the fact that you managed to unite your strongest magnet with itself is INSANE. What once was your strongest magnet, now paired together with itself to make an absolute beast of a magnet. That alone is astonishing and I can't wait to see how well it will perform against your 200×50cm magnet in your next video. Awesome video as always, Brian.

[@nowonmetube]

Abu Hamza Muharemović "unite your strongest magnet with itself" what

[@Silexium]

nowonmetube As in unite two of the same magnets together.

[@azazel_broski9923]

Me: cool video, cool magnets! Him: *slam* cheese

[@daanvreugdenhil]

0:55… Dude… you’ve got a serious eye condition… LOL 🤣 I can’t even squint… About that strange sound: I’m not an expert, but I think that that sound is created by the pressure of the to magnets, and the friction on the plastic wedges.

[@fluffyfloof9267]

Looking forward to the video in which you separate them. ;D

[@RoxAS-RN]

5:44 The breath scared the shit out of me.

[@twangerrrrrr]

found this video in recommended after so many years

[@Comrade.Question]

Was looking for Monster Magnet, found monster magnets.