Brake Adjustment On Apollo E-Scooters

[@frankiejeh8028]

Can you guys create a video for adjusting the rotor on the front brake of the zero 9? Really need this... Have some rubbing and don't know how to adjust the pads/rotor to stop the rubbing. Please help.

[@nickwhite3686]

Hi, can you please share how to stop the breaks from scraping on a zero 10 on the rear tyre? Had to change the tube because of a puncture and when I put it back together the wheel doesn't spin freely. I've tried so many things and not sure how to fix it. Your help is appreciated.

[@wheremylifego3790]

So I have the same issue with my zero 11 X but these brakes are different to mine, mine has NUTT brakes , which type of breaks are these ?

[@RevRides360]

Yes, the Nutt brakes are hydrulic and the ones in this video are mechanical. Hydraulic brakes can be adjusted as well. Either you need to adjust the lever position screw located by the brake lever or bleed the brakes. Bike shops or other KZbin Video's can help. Just search how to adjust or bleed hydraulic disk brakes on a mountain bike.

[@merivale1977]

It is possibly to mount a disc break front tire on zero 8? Thanks!

[@trappy923]

Thank you🙏🏽🙏🏽 my brake was so lose was thinking to take it to the shop but i found you

[@RevRides360]

Glad to hear it helped!

[@markusweninger3759]

Thanks! Should the Zero 9 rear wheel spin as freely as the front wheel or not-because of the motor. Mine spins max 1 turn even after loosening brakes.

[@RevRides360]

You are correct. To set your brakes it is best to make sure that when you free spin your wheel you can stop the wheel immediately upon applying the brakes. You can also pull the brakes and lean the scooter up on the rear wheel and pull back the scooter to ensure the wheel does not spin and stays in place while putting pressure on the brakes.

[@michaelscott2516]

Why is there no videos on how to adjust the Nutt Hydraulic brake

[@tarakmehta9665]

Same tuning for zero8 also? I want to lose my zero8 's break which is tight now. Thanks

[@fiyahflash]

Thanks for this video; I can see that the place that fixed my tyres did not put the cable through the holder at the back, which is why I have lost all tension at the front. Fingers crossed I can fix it myself

[@RevRides360]

That's a bummer! Good luck. Let us know if you need any help.

[@theslicefactor5326]

Can you do one for the Kaabo 8S?

[@aragorn318]

Is it possible to install front drum brake on the Zero 8?

[@toddlauretteHabsforlife]

Hey, i had a flat tire in the rear of my 10x, and when i changed it, i put the tire back on, and when i spin the tire it is always scraping against the rear brakes. I messed with it for about an hour, couldn't seem to fix it, so i took it right off, and went for a ride. I dont wanna leave it like that tho, i plan on fixing it in the morning, any ideas on what to do? I can't see the big silver part, that the brake pads grab, i cant see it being bent, but maybe that's the problem. It doesn't appear to be bent anyway. Any tips on how to get my brakes back on without them scraping against the brake pads?? Thanks, sorry if this sounds dumb, id rather get someone's opinion before i fuck with it anymore!! lol. Thanks man.

[@RevRides360]

Hey Todd, You can take the two black bolts loose that mount the brake caliper from the top, squeeze the brake lever, and then tighten the bolts down. This will align the rotor side to side. Sometimes it takes some moving around to get it in just the right spot.

[@toddlauretteHabsforlife]

@@RevRides360 Right on, thank-you very much, i appreciate u taking the time to help!! Have a good day, ride safe, and have fun.

[@robblackmore8434]

I've replaced the inner tube, when I put the wheels back and tightened the nuts the disc is now stopping the wheel moving at all. Any help please??

[@RevRides360]

Hey Rob, which model? You want to check that all connections are correct, and that the inner axle washers are in the correct positions.

[@jimmya.t.8928]

HEY bro, I have some problem with the breaks, when I hold them on the display start a light on with this signal (!). what can it be?. thks dude.

[@RevRides360]

It is normal for you to see that when you hold the brakes.

[@jimmya.t.8928]

@@RevRides360 thks for the answer.

[@toddlauretteHabsforlife]

@@jimmya.t.8928 yah bro, it always does it when u apply either the front or rear brakes, just so u know why ur throttle isn't working im assuming. I have a buddy that the ! stayed on his scooter, and he couldn't ride, it turned out that his brake was stuck on, and the safety feature won't allow u to brake and use the throttle at the same time, he thought he was in for a bunch of repairs!! lol.

[@bojna1]

When I tighten the brakes the pads start to touch the disk. How do I micro adjust the callipers? Thanks!

[@RevRides360]

There is an inner allen plug on the caliper that you can loosen to open up the gap, or use the micro adjusters on the brake levers to fine tune the alignment.

[@bojna1]

REV Rides thank you.

[@jesseh56]

Did you guys get bought out by apollo ?

[@RevRides360]

No we did not. Zero Motorcycles forced us to stop using Zero in our video's and on our website. Claimed it's a cause for confusion with their motorcycles. Don't worry, were still the same REV Rides everyone loves. :-)

[@benjaminm5232]

Can you swap out the stock brake levers with shimano brakes? Anyone done this before? It seems like an easy swap unless I'm missing something.

[@CAVEMAAN76]

Thanks my Dude🤙

[@Ausbia]

My break is failing it starts to grab then makes a click noise when it fully releases

[@ninobrn00]

Can the rear be converted to disc brake?

[@RevRides360]

Not on the ZERO 8 or 9.

[@leemarcelino7357]

I received my brand new zero 9, got issues with the disc break coz its touching the calipers creating a scratching sound.

[@RevRides360]

Hey Lee, were you able to adjust your brakes?

[@leemarcelino7357]

Hi. Thank for the response. Yah, was able to fix they're working fine now. My problem now is when I charge it, the first 2-3hours, not exact, the charger light is in solid red. But then it will keep on blinking red on the following time on charging. I never had it on solid green light that indicates when its fully charge. Its just my 3rd time charging it in almost 2 weeks after purchase. I really worried if my batteries are working fine or has some defects on it. 😢😢😢

[@RevRides360]

@@leemarcelino7357 I would definitely contact your dealer about the charging issue. The charger should not be blinking at any time, and we have not experienced that issue.

[@frankiejeh8028]

@@RevRides360 Hi there. I actually do need help with this. I have the front disc rubbing on the zero 9. I tried to install sliders but when I put them on, the disc is rubbing. Wondering if you guys can help me?

[@ocelotsix6six]

Need a video on to fix the spring that connects to the folding latch.

[@RevRides360]

Great suggestion and it was nice talking to you today.

[@ocelotsix6six]

@@RevRides360 like wise. I ripped it apart . i think i can get it with a spring hook. But if there is a easier way to attack it.

[@ANTPLFC]

Does anyone no how to tighten the rear brake on the kugo g2 pro?

[@HorneyOne]

LEGEND

[@yuribernardes]

Thanks brow

[@rsupremexx3971]

Thanks, no wonder my front break wasn’t working

[@titowaps555]

Thanks man. I wana join your zero community

[@RevRides360]

kzbin.info?q=https%3A%2F%2Fwww.facebook.com%2Fgroups%2FZERORIDERS%2F&event=video_description&redir_token=gweMeacFx78dm_u7BQQH1LefRJ58MTU5Mjk0NzMyOUAxNTkyODYwOTI5&v=zun9d0k2UYM

[@Zurl6321]

I didnt really understand how you fixed the back tire

[@Zurl6321]

On zero 9

[@TimsElectric]

Much appreciated :)

[@felipevitar6131]

thanks man!

[@RevRides360]

You bet :)

[@QA-wt5gx]

The inner brake pad of the front wheel should be checked and adjusted if needed

[@Gyrolin]

Is there a tutorial on this? Im trying to fix this right now and noone has actually posted anything on how to adjust this.

[@IsmailAli-nz2fg]

My scooter not working

[@RevRides360]

Sorry to hear

[@michaelbesler7469]

Sorry to say but that was a very poor teaching session. With cable disc brakes there is a 5 mm Alan key adjustment to do on the inside of the calliper. You can do better.

[@RevRides360]

Thanks for the feedback Michael. You are correct, this video is not a comprehensive guide on brake adjustments, only a quick adjustment that is commonly needed after break-in. More videos coming soon.