Brake System Tutorial (Scooter / Motorcycle)

[@sandracloutier8230]

Thank you for making the time to do this! 56 year old woman...retired! I've decided that if I put the time and effort ,i should be able to fix such issues instead of always relying on someone else! This is not my field...! But your explanations are clear,simple and really easy to understand! Thank's for the confidence boost!

[@jason.arthur.taylor]

The problem was that that brakes got stuck all the way open, I think. Perhaps due to dried fluid or debris behind it. Once you broke it so they could move again, they could automatically adjust again. Another symptom is probably that the brakes would always be on when hot before this happened. A faster way to fix would be to just move the pads with a screwdriver while they caliper is still on, if my theory is correct. Thanks for sharing.

[@ronturner1345]

Hey joey Can you make a video Showing how to adjust scooter front brakes

[@mperez5920]

Hey Joey great video! I have a question, what if after bleeding the rear brake it still has no compression?

[@toddlawson3325]

What does it mean if you can start your moped without engaging the brakes and the front seems tight

[@juntjoonunya9216]

Good job on breading your blakes lol

[@oTBePka]

hey, so I see how you can put the pistons back inside (loosen the brake) , but how about if you want to make it more stiff and push theb back up ?

[@jujustreetz4180]

I need help with my 2015 jcl front breaks. Anyone know any video I can watch. Or are all front breaks on these Chinese scooters the same??

[@angeljimenez5406]

Great video. Do you have a video on how to bleed the brakes?

[@JoeysGarage]

No. But it’s super easy. Similar to cars, have a plastic bottle with your Brake fluid. Open valve, and pump the brakes. Don’t let reservoir run dry.

[@gambot2861]

What is that pipe called that carries brake fluid to its brake caliper

[@vickikgibson9470]

After i removed the front eheel to have a bew tire on and i also did new brake pads, the pads made a bit of noise which i was told was a bit normal for new pads. The caliper seemed ok and pumped back onto wheel when i installed it. But i think i need to redo thise completly as now when i put the bike down and went to move it, its totally not going anywhere! Im workibg on a 2009 ysmaha majesty 400 scooter. Any ideas for ne epukd bd great. Maybe a caliper rebuild kit, ir can i take the pustobs out and gently refurbish? Please reply, would love the help. Thanks much, Vicki

[@disspara_dll5337]

Very Nice content 🤙🏽

[@buckmajor]

GOD dammit! I did mistake. After cleaning it I still can't feel pressure on my brake? I needed to clean it out by having the pistons out and not closed because of that I think its stick to the point I am unable to bleed the brakes? What to do with a closed pistons? I took it off the brake fluid line so its by itself. Now how do I open the pistons up so I can clean it properly? Or do I need a new one? Arrhhh!!!!

[@juliodiaz4493]

You don't fill Through the caliber through the top only right

[@ronturner1345]

Hey joey Can you make a video How to adjust front brakes scooter

[@A.Hisham86]

how did you bleed the brake???

[@nathangen]

Video about bleeding the brakes and refilling the fluid?

[@finessum2timez]

That's what I'm saying. Why wouldn't he add that information to this video, it's kinda important ya know.

[@ryze_2k448]

Thanks so much

[@bjarnirein3787]

thx

[@JohnSmith-xx1lx]

I bread 🍞 the blakes lol..

[@AlvaroSanchezChile]

VL

[@jamiediseker9232]

❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

[@firebladex8586]

Nice freemason mobile

[@Freebyrd1991]

gay

[@steher1610]

Just like you wow maybe you should hook up with him😀