How To Bleed Disc Brakes [STEP BY STEP]

Bleeding brakes can be stressful to bleed by yourself. With these 6 brake bleeding tricks you should easily be able to bleed your brake system by yourself. This how to will work on all motorcycles, scooters, ATV’s and automobiles.

[@dadlifegarage2292]

Gravity bleeding is how I was taught, great video.

[@christophertorrijos8961]

Great video! Awesome how-to for the diy savvy 🤙🏾

[@raymondharold5973]

Great info, hacks were cool! THANK YOU AND GOD BLESS!

[@Dakidrob_305]

Yes perfect it works appreciate the video your awesome bro.!!

[@beanbagcrew9892]

I needed this video! Thank you!

[@RollingWrench]

Sweet! Hopefully some of these tips will make your brake bleeding process a breeze next time :-)

[@shhpopes2903]

Great video👍👍👍

[@youngmenace5401]

your videos are so helpful really appreciate you doing them

[@RollingWrench]

Thanks for the support brother 🙏🏻💯. I appreciate you

[@naterobertson3366]

Excellent video brother! Thanks for all the tips and tricks greatly appreciate you my good man and God bless you brother

[@spencerguignet1210]

Love those master cylinders! Just got this pleasure myself.

[@andyproctor3588]

Thanks Matt that was super informative always enjoy your videos hope you and your family have a good Christmas and we will catch you on the next one

[@RollingWrench]

Thanks Andy for the support 🙏🏻. I appreciate the positive comment

[@psychouki]

I always thought you had to open the bleeder after you've squeezed the lever a few times and hold it. Then close the bleeder and then squeeze your lever a few times once again hold and repeat the process

[@p33rsy32]

I'm so glad you made this video. i was wondering if the nipple should be up the top like my factory 2 piston caliper because after 30mins i got no where ahaha. After putting the nipple to the top i had the brakes bled within 2mins i reckon.

[@RollingWrench]

Yea nipple on top for sure. Bubbles go up

[@BloodSweatnBass]

Awesome Stuff

[@gmseed1908]

exited at the 3rd ad. Before that it was all pretty standard stuff.

[@captrevo]

Good 👍

[@JQuilATL]

New schedule salute

[@Monty820]

This vid came in clutch!👍

[@RollingWrench]

P e r f e c t !

[@georgetaltontalton3256]

The big bore kit in the 2020 taotao runs great but I know I need to upgrade in the other components like the clutch, carb, cdi,coil and muffler I will be ordering them from you if you can help.

[@sukrusahin3013]

İşçilik muhteşem anlatım harika severek takip ediyorum mekanik bilgin efsane başarılarının devamını diliyorum. Tekrar söyleyeceğim türkçe alt yazı eklersen sevinirim... 😎👍😁🙋🏻‍♂️

[@dannyaakjr6359]

do you know what i need to do to get my new bougth 2020 model of the kymco agility 16+? someone talk about the ecu being an issue?

[@mandiphillips2263]

Awsome

[@patlevv7382]

That's VERY helpful 👍

[@jill4226]

Thank you

[@RollingWrench]

Thanks for watching :-)

[@minibikeaction4266]

I really like what you have done with your fuel injection controllers. Would they work on a Vader 141?

[@matthewduprey4389]

Thank you!

[@127EZ]

What gram of ball should i use for my gy6 150 which is always heavy due to i use it for delivery and passenger? It has dragging problem when heavy.

[@skullman0819]

I can do this on my scooter, it squirts brake fluid out like crazy when I squeeze the brake line..

[@clifrisner1532]

I love the brake segment. Maybe in the future you can explain match carburetors to exhaust. Like carb mm to exaust mm size. Learned a lot about gy6, thank you.

[@RollingWrench]

Good idea 💡! Thanks for the support 🙏🏻💯

[@roywalls5595]

Hi Rolling Wrench My scooter only use Dot 4 brake fluid! Tell you one thing this scooter got 5 brakes on it!😎

[@RollingWrench]

Dang!

[@budgetbuyoutmisc.4916]

So 1p39qmb is still a 49cc 4 stroke I know I ask on another vid but that video is 8 years old

[@johnmurphy4273]

Hey I commented on your old video but am trying your latest upload to see if you’ll notice... When switching from 8 pole to 11 pole stator you never addressed what to do about the extra wire that the 11 pole stator has. I am stuck. Do I just ground the green?? Thanks

[@RollingWrench]

Our kit is all inclusive. There shouldn’t be an extra wire. Please email us regarding our parts. I appreciate you

[@progaragechinskiemotorki]

strzykawka z zaworkiem jednokierunkowym i 2 minuty roboty :D

[@garrm0510]

When you gonna get your stuff restocked everytime I go to buy something it's always out of stock lol

[@RollingWrench]

It’s a constant battle with suppliers. What do you need ?

[@recycle247]

I need some stopping power on my ride!

[@MosaicArtizt]

Do you still have these turn signals?

[@Lil_eee]

I want that exhaust how can I get one

[@christophershanz498]

Help my scooter won’t start because of the brake sensor and I can’t get one is there any way to bypass it

[@RollingWrench]

Connect the two wires to by pass it

[@christophershanz498]

@@RollingWrench ok thank you

[@ryanbisi3830]

Interestingly enough, almost all motorcross bikes I know call for dot 5.1

[@roywalls5595]

On Piaggio mp3 two disc in front & one disc in back & other disc brake on top center front and one parking brake in back! Top disc brake is tilt system that one can`t be bleed!

[@RollingWrench]

That sucker definitely has an advance brake system. Bleeding those brakes would be a project. The MP3 has an ABS system as well I think?

[@roywalls5595]

@@RollingWrenchThere no ABC brakes system on it. Rolling wrench I. E. main fuel injection ECU on it!

[@alfayrush6883]

Hey, wher the street cub

[@erykberwick6947]

I'm with ya I want to see that thing run

[@deannagrayston5809]

I there a vtec cam for gy6

[@jamespolucha8790]

I’ve been doing this for a week, even bought the vacuumed bleeder 2 different style bleeders just can’t get the lever to come up, I took the line loose at the masters cylinder and getting pressure there then tried it at the caliper also just can’t get it

[@RollingWrench]

Pull the caliper off the bike with the hose connected. Rotate the caliper as you bleed. Also be sure to bleed at the banjo fitting

[@jamespolucha8790]

I’ll try that in the morning, thanks

[@jonatanfriberg3251]

Sir, maybe you should hook up with mr Motonosity and figure out what’s up with his Ruckus setup!

[@RollingWrench]

I did comment a brake bleed tip in his post. Not sure if he tried it.

[@SC8terRiderMotoVlogger]

🤗 👍 ☝️ 😎 🇵🇭 Niceone KaMotoFriends

[@georgetaltontalton3256]

I need to ask you some questions I put a 100 cc big bore kit in my 50cc taotao and need to order a new carb and a new racing cdi box and hotter coil pluss I need to know what kind of muffler and clutch I need to put in it? I have ordered other things like that from you for my other 500cc scooter but it didnt have the big bore kit in it?

[@georgetaltontalton3256]

I meant 50 cc not 500 lol

[@ruddyrabe]

just in time!

[@RollingWrench]

Sweeet! Get those bubbles out ! 😛😝💯

[@christophershanz498]

I’ve upgraded my exhaust now what size carb should I get I have a tao tao 150

[@RollingWrench]

26mm www.rollingwrenchdenver.com/products/gy6-oko-complete-carburetor

[@christophershanz498]

@@RollingWrench I actually have one of those off of a Honda dio do you sell just the intake and air breather

[@charliechrist7537]

😎

[@bad942]

Do you Sheep ti México

[@vernonhochstetler7608]

Matt Bro if you could PM me on FB Messenger. I lost all contacts and had to start a new FB PG. Vernon Hochstetler. I just started the GY6 swap for the 1st time. She fired right up and she is one hell of a pig. This is all your products and motor build. Please get hold of me on FB. Thank you. I been trying the reach you.

[@gordonong943]

Thank you