BRAND NEW HIPER TECH 3 BEADLOCKS AND GBC TIRES

[@ArizonaKid]

Ya I need new tires one day . Thanks for showing us my friend , see ya on then next one

[@ononewheel7]

I am gna try working with gbc for a possible discount code 😬

[@ArizonaKid]

@@ononewheel7 nice , keeps us posted please

[@ononewheel7]

I will for sure!

[@tony.xc826]

Awesome wheels tires and hell yeah moonshine

[@ononewheel7]

Its a rock solid setup for sure thanks man! I see a serious hangover in my near future 😬

[@Thisbajabug]

Awesome Video's love the New Rims I need a Set..

[@ononewheel7]

Thanks man! Took a while but well worth the wait!

[@NastyNaz1000]

👍🏾....John I order the solenoid 2 of them just in case one goes bad I’ll have a back up.Thanks brother I got a strong feeling that’s the start problem..

[@ononewheel7]

Nice man i think you will be good!

[@Team2Gils]

Man those look sharp! Look fairly light as well. Nice John 👍👍

[@ononewheel7]

They are sweet! Not too bad weight wise either!

[@conniestevenson226]

@@ononewheel7 about equal to any other dual beadlock from what i researched

[@josemarti4917]

What amount of torque do you recommend?

[@Alex-zm8vh]

nice clean beads good to see a new video 👍

[@ononewheel7]

Thanks alex

[@conniestevenson226]

I bought new hiper beadlocks and two of the beadlock bolts dont go all the way down before they get tight. The part that does thread in is perfect. the threads in the rims brass insert appear to be fine. The one needs to go down about 1/4" and the other about an 1/8". Is this normal to sometimes happen? Its my first set of hipers ever.do you think i just need to run a thread chaser down thru. The tip of the bolts that gets tight to early has the last two threads finish rubbing off slightly from excess friction. I dont wanted to try and tighten it to much so the insert doesnt spin.it came like that when i received them on friday

[@ononewheel7]

You could clean it w a tap or call them amd see what they say maybe they can send a replacement?

[@conniestevenson226]

@@ononewheel7 its one bolt on one wheel and one on the other wheel. Ill call hiper hand see what they say first. Thank you for your very fast reply.

[@ononewheel7]

Anytime man ya see what they say just incase!

[@luisito0392]

Very Nice John!

[@ononewheel7]

Thank you! Its a sweat package thats for sure!

[@grandpa-of-3898]

Cool 😎 great video

[@ononewheel7]

Thanks

[@kingkracker1998]

i was told to put anti seiz on my ring bolts, but thats also on cf1s

[@ononewheel7]

I will do that when i do my tire balls!

[@conniestevenson226]

Im gona put 7075 aluminum bolts on mine.get some weight saving back since beadlocks are tad heavy

[@ononewheel7]

Ya they are a little heavier vs other wheels!

[@jaykincell1379]

Nice setup 👍

[@ononewheel7]

Thanks!

[@ATVGBulgaria]

Awesome set!!!

[@ononewheel7]

Thanks

[@wittracing72davidwitt74]

Glad to see you finally got wheels. There hard to come by. Where did you get the stand that your new bike is on ? that would make it nice to work on and easier on my back

[@ononewheel7]

It took about 6-7 weeks but well worth the wait! That stand in from harbor freight its the 500lb one i scored it onsale for 179.99 they also have a 1000lb one for 299.99

[@978twostrokegarage2]

Dam those are sick wheels.. nothing but the best for the Yzf450 🤟🏻🔥🔥

[@ononewheel7]

Love hipers been running them since 2011

[@978twostrokegarage2]

@@ononewheel7 I need to get my hands on some good wheels for my hybrid build

[@ononewheel7]

Contact hiper and order a set 😁

[@978twostrokegarage2]

@@ononewheel7 lol yea use your 50 percent off lol

[@ononewheel7]

I wish 🤣🤣🤣 next year they are hoping to work with more people!

[@cloudnurdz6331]

how do you like them ground buster lll tires I'm looking to buy some new tires i run maxis razor 2 but they are getting up there in price

[@ononewheel7]

I love them

[@Oloughlin2777]

I just got my first set of hiper tech 3’s and my gbc tires on the front wobble. Like the tires aren’t on straight or offset. Any help? Thanks in advanced.

[@ononewheel7]

Maybe undo the ring and re fasten it! Maybe you have the tire off in there! Bolt the ring in a criss cross pattern

[@Oloughlin2777]

Ok, thanks!

[@timmymiller6952]

I'm looking for the tabs and plugs for mine. I can't find them

[@ononewheel7]

Ebay has em or call hiper!

[@timmymiller6952]

Ok thanks 😊

[@ononewheel7]

Anytime

[@nest138]

Do you put Loctite on the beadlock threads?

[@ononewheel7]

No its not needed.

[@nest138]

Thanks sir throwing a sit on my raptor right now

[@wiattmarlatt3252]

Which size hiper rim will fit my 22x6x10 and 18x10x8 rear tires?

[@ononewheel7]

Fronts will he a 10x7 rim Rears will be 8x8

[@amacracing9]

Is there any any benefits to running the front tires the different directions, outside knobs facing in or out?

[@ononewheel7]

So i have heard w the outer knobs facing in it steers easier! With the knobs facing out you get a better bite for climbing out of ruts! I have tried them that way but dont like the feel of it! Look at all the racers out there its just about mixed about 50/50 each way!

[@amacracing9]

@@ononewheel7 I have noticed that watching races, was always curious as to why some had them going the opposite way. Figured it had to have something to do with traction somewhere. Thanks, that hyper and gbc combo looks amazing!!!

[@ononewheel7]

Anytime man and thank you!

[@conniestevenson226]

The front end will want to wander like having the front toe out having the tires the one way, but the steering will bite quicker when steering which will require more effort to steer since the tires biting in will create more resistance.and the other way the tires with work like having tires toed in like normal and easier steering effort.

[@conniestevenson226]

What flex bars are you running quad hi rise 14 deg bend?

[@ononewheel7]

I run the 15 degree atv low bend

[@drevenaguilar8598]

I have the same one and the don't fit on my hub threads any suggestions

[@ononewheel7]

So the rim does not fit on your quad?

[@drevenaguilar8598]

@@ononewheel7 back ones do not front tho

[@drevenaguilar8598]

Front hub threads spread about a quarter inch apart idk if there's different hubs I can buy to fix the problem

[@ononewheel7]

What kind of quad do you have Fronts are machine specific and rears they offer dual bolt pattern yamaha is an oddball offset Honda/kawi/suzuki is the common one

[@drevenaguilar8598]

@@ononewheel7 07 yfz450 I ordered them on ebay from atv galaxy and it said yfz450 and yfz450r it took 4 month to come so I don't want to have to send back

[@tperez838]

Why did you use a dremmel to cut something out?

[@ononewheel7]

To make a notch in the mod ring for the valve stem/open up a spot for the socket to fit in the wheel for installation/removal of the rim. The mod rings have an added section inside the ring to hold the mud plug.

[@jefftrumble4768]

Have you run the Maxxis or Kenda as a comparison to the GBC? Thanks.

[@ononewheel7]

Years ago i started w maxxis they were ok then i actually rode for kenda for 3-4 years after trying a friends quad w gbc’s i made the switch!

[@masyncreager5136]

Do you mess with the tps sensor on your quads with a vortex on it?

[@ononewheel7]

I always set it to .068 volts when setting up the quads!

[@AkAk-gn4eh]

Is it the same with a raptor 700?

[@ononewheel7]

The raptor does have a tps I’m not sure if the voltage setting is the same as the yfz but I’m sure its adjustable.

[@ngrimm0]

What torque wrenches that that you are using

[@ononewheel7]

Husky

[@doc_teamwaxoffroad]

Nice..... 👍👍👍

[@ononewheel7]

Thanks!

[@BrewerOffroad]

I totally should have gotten dual beadlocks in the rear 😭 I don't know what I was thinking.. oh well lol

[@ononewheel7]

Singles are ok but for racing especially the duals really add extra protection!

[@conniestevenson226]

I pike them because they add strenth too inner edge like reinforment rings.plus the beadlock make the side wall stiffer since the beadlocks clamp farther up the tire sidewall then non beadlocks simple rim bead lip

[@ononewheel7]

Dual is the best way to go especially if your racing!

[@josemarti4917]

What amount of torque do you recommend?

[@ononewheel7]

I believe the ring bolts are 114 inch lbs

[@ThatHawaiianBoy22]

Love your videos man! Im new to this game! Bought an 06 YFZ 450 and literally trying to build it up to race with my buddies. I love your whole set up on both bikes. Im wanting to try your wheel/tire combo. Obviously, you posted links with the brands. By chance, can you send your dimensions for both wheel and tire? And why you prefer that set up?

[@ononewheel7]

Thanks man 🤘 Tires are 21x7x10 fronts 20x11x9 rears Rims are 10x5 front 4+1 offset 9x9 rears with 4.5+4.5 offset

[@ThatHawaiianBoy22]

@@ononewheel7 dude, thanks for taking the time to reply to my comment! I’ll have to call them and get my order put in. Much appreciated!

[@ononewheel7]

Anytime man!

[@barneychamorro]

Do you use the OEM lug nuts with the Hipers?

[@ononewheel7]

I use some from ebay that have locking washers on them

[@keroll9476]

what size tires you running front and back?

[@ononewheel7]

20x11x9 rears 21x7x10 fronts

[@keroll9476]

@@ononewheel7 what about bead lock sizes and offsets

[@ononewheel7]

10x5 front rim with 4-1 offset Rears are 9x9 and 4-5 offset

[@travisnunya4641]

You never mentioned what you torq them to and why do you have to cut the new rings

[@ononewheel7]

Rite in the beginning i did 🤣🤣🤣 And i said why i trimmed them for the lug nuts/valve stem.

[@travisnunya4641]

@@ononewheel7 yeah I got to carried away

[@ononewheel7]

🤣🤣

[@ononewheel7]

You had me worried I’m like crap did i forget that in the video 🤣🤣🤣

[@BradMason2014]

Nice John. What do you use to lube up the tires? I swear by white lithium grease. The beads seat every time with no hassle.

[@ononewheel7]

Usually just tire ball lube! I let jimmy know also for ya!

[@BradMason2014]

@@ononewheel7 Thanks John! Appreciate that! Hopefully he'll free up some time for this poor TRX slob soon. 😎👍💯

[@ononewheel7]

Im still waiting for one too 😬😬😬

[@dustinrichards8401]

I run Goldspeed wheels and love them but are hipers really worth the money

[@ononewheel7]

Goodspeeds are good! I just love hipers the most!

[@conniestevenson226]

Whats weight difference.and do gold speed come in dual beadlock

[@ononewheel7]

Not sure on weight the rears should have dual beadlocks as an option for goldspeed

[@JLHskids]

What size tires do u run

[@ononewheel7]

20” rears and 21” fronts

[@JLHskids]

@@ononewheel7 thanks and thanks for the reply

[@ashersearles9908]

Where could I get a rekluse z-start for a 05 Trx450r? Anyone got one for sale

[@ononewheel7]

Call rekluse is probably your best bet!

[@juliomtz9575]

How much torque are the bolts tightened to?

[@ononewheel7]

Ring bolts 114inch lbs

[@ovenuu7049]

Where do you get your rims and tires from?

[@ononewheel7]

Tires rite from gbc Rims rite from hiper

[@osbelsantiago1751]

Pound on wrench?

[@ononewheel7]

114 inch lbs for rings

[@travisnunya4641]

What size tires are these

[@ononewheel7]

21x7x10 20x11x9

[@kingkracker1998]

they tec3's are so much nicer than the cf1's

[@ononewheel7]

They sure are!

[@Gripitandripit450R]

Tire and rim size please

[@ononewheel7]

Gbc tires Xc master fronts 10x7 Ground buster 3 rears 9x9

[@kingkracker1998]

u didnt say what u torqued em tooo, 7 ftp. the rings that is

[@ononewheel7]

I thought i did in the beggining? 106-132 inch pounds i think it was for the rings!

[@MatthewJohnson-o4x]

What’s the deal with the tire balls

[@ononewheel7]

Deal? I used to be able to share a discount code for them but not anymore if thats what you mean. Sorry i may reach out to them again and see if i can get it back.

[@timothyphillips2320]

Ewwww Hipers!!🤭😜

[@ononewheel7]

Nothing but the best here 🤣🤣🤣

[@timothyphillips2320]

@@ononewheel7 Only I’m your dreams😂

[@eddieadams6863]

Over torque the bead lock ring much

[@ononewheel7]

Nope my gun is set low and just above the 114 inch pounds hiper recommends which is never enough to seal the tire.