ALICE PACK lid repair UPDATE!

Sponsored by Flex Seal®, an update to the quick & easy ALICE pack lid repair video!
In my first video I demonstrated a quick and easy way to repair an old deteriorated ALICE pack lid using Flex Seal®. Since that time I have used my ALICE pack extensively and I wanted to give you guys an update as to how the Flex Seal is holding up on the pack lid. Additionally, this update video is sponsored by Flex Seal so they hooked me up with some additional cans in some new tactical colors that I'm going to try out on the three exterior pocket lids of the pack.
If your interested in the different colored Flex Seal cans, they're only available on their website: www.flexsealpr...
Thanks for watching!
My original repair video: • Quick & easy repair to...

[@Brent0331]

USED USGI ALICE pack: bit.ly/3bDLsyO **Guys, Primary Arms is hooking up my subscribers! If you want to get FREE shipping and a free gift such as a FREE or discounted (depending on which scope) scope mount for the variable scopes, or a free anti-reflection device for the prisms optics, just follow the links I have posted below on the scope of your choice. YOU MUST follow these links or you will not get the free or discounted mount/anti-reflection device from the standard Primary Arms website.** PA CYCLOPS 1X PRISM (BLACK): bit.ly/2BREKZn PA CYCLOPS 1X PRISM (COYOTE/FDE): bit.ly/2BRfhiX PA Advanced Micro Dot w/ push button: bit.ly/2LX39Nd PA Advanced Micro Dot w/ rotary knob bit.ly/2CjTCjr PA Micro dot (Budget red dot) bit.ly/2xPK6j2 Holosun HS503G RDS W/ ACSS bit.ly/2r7gCd3 PA 3X Magnifier bit.ly/2r3XAV2 GG&G flip to side magnifier mount: bit.ly/2EN5uv3 PA 1-6X24 FFP ACSS RAPTOR 5.56 / 5.45 / .308 BLACK bit.ly/2jW0V4O PA 1-6 FFP ACSS RAPTOR 7.62x39 / 300 Blk out bit.ly/2IIAnC5 PA 1-8 SLx ACSS RAPTOR 5.56 / 5.45 / .308 bit.ly/38GcyoZ PA 1-8 PLATINUM FFP RAPTOR 5.56 bit.ly/2zqXYBo PA 3X Compact Prsim Scope ACSS 5.56 GEN II (Black) bit.ly/2OzAQqA PA 3X Compact Prism Scope ACSS 5.56 GEN II (Coyote) bit.ly/2OAEekN PA 3X Compact Prism Scope ACSS 7.62x39/300 Blkout GEN II (Black) bit.ly/2KdtaXD PA 3X Compact Prism Scope ACSS 7.62x39/300 Blkout GEN II (Coyote) bit.ly/2n3AgVv PA 1-8X Scope with Patented ACSS 5.56 / 5.45 / .308 Reticle bit.ly/2SPbNob PA 1-6X24mm SFP Riflescope with Patented ACSS 5.56 / 5.45 / .308 Reticle Gen III bit.ly/2BD73bB PA 1-6X24mm SFP Riflescope Gen III with K.I.S.S. Reticle bit.ly/2SUbxEo PA 1-6X24mm SFP Riflescope with Patented ACSS 22LR Reticle bit.ly/2N8fj7P PA 1-6X24mm SFP scope w/ACSS 300BLK/ 7.62X39 Reticle bit.ly/2N6Qut9 PA 1-6X24mm SFP Riflescope Gen III with Patented ACSS 22LR Reticle bit.ly/2N8fj7P Trijicon ACOG TA31 4x32 Scope with RED Dual Illumination ACSS Reticle TA31-R-ACSS bit.ly/2EQIMhg Trijicon ACOG TA31 4X32 Scope with RED Dual Illuminated ACSS AURORA RECTICE bit.ly/2T6uZuz Trijicon ACOG TA31 4X32 Scope with GREEN Dual Illuminated ACSS AURORA RECTICE bit.ly/2FRTmIQ Trijicon TA44 ACOG 1.5X16S TALL BASE (GREEN ACSS reticle) bit.ly/2DkC72H Trijicon TA44 ACOG 1.5X16S TALL BASE (RED ACSS reticle) bit.ly/2rdEu1O Trijicon TA44 ACOG 1.5X16S SHORT BASE (GREEN ACSS reticle) bit.ly/2EQge7G Trijicon TA44 ACOG 1.5X16S SHORT BASE (RED ACSS reticle) bit.ly/2FMdLMO Camouflage painting stencils: PA Tiger Stripe Stencil: bit.ly/2Dqzafa PA Multi Terrain pattern stencil: bit.ly/2Izaxkt PA Flecktarn stencil: bit.ly/2DwfMxb PA Digital camouflage stencil: bit.ly/2W0PvOP **Great DEAL on Palmetto State Armory lowers to complete this build on a budget! (PLUS, going thru these listed PSA links supports my channel!)** M4 style lower for $130 shipped: Black: bit.ly/2F5FRDU OD Green: bit.ly/2IbtcRY Coyote/FDE: bit.ly/2IGuPpV Full size M16A2/A4 style lower ($200): bit.ly/2F5HaCO **Here's a few links to good deals on Sportsman’s guide on ALICE related gear:** USGI Artic canteen: bit.ly/2U5WvKs TWO 2 quart canteens with covers & GP straps: bit.ly/2z2x16O Great price on a current issue USMC camelbak bladder: bit.ly/2vVDe6n SAW pouch (Great General purpose pouch): bit.ly/2PSyPdO Great price on a USGI bandolier! bit.ly/3bDOzY9 TWO ALICE IFAK pouches w/ boxes: bit.ly/2MlFPx8 USGI folding E-tool w/ cover: bit.ly/2O2PXuL Just the ALICE E-tool cover: bit.ly/2OdFsFd ONE used but cheaper WP bag: bit.ly/2H7VlIM ONE Current issue small WP bag (fits good in ALICE pack exterior pouches): bit.ly/2yYXouc FOUR (same as above) of the smaller WP bags: bit.ly/2Z7Rz8q TWO ISO mats: bit.ly/2y9vNJx USGI sleeping bag compression bag: bit.ly/2z14nCR ALICE belt: bit.ly/2Hmn48T M65 field jack liner: bit.ly/2Uqv931 300 Ft of 550 Cord: bit.ly/2KLADj2 **Brownells Vietnam era rifle clones:** Model 601: bit.ly/305JVMf -Just the upper: bit.ly/2ZTccKC XM16E1 bit.ly/2NRME9P -Just the upper: bit.ly/2LoDGz8 -Stripped lower: bit.ly/2Lr4TkM M16A1 bit.ly/2ZD6Yls -Just the upper: bit.ly/2Q6lwGG -Stripped lower: bit.ly/2Q1TnAA XM177 E2 bit.ly/2ZD6wnj This website sells a lot quality reproductions of vintage camouflage patterns: onlinemilitaria.net/shopaff.asp?affid=1608 Don’t forget to check out and subscribe to Bruce’s channel: kzbin.info/door/wfzznRRdLUHwKiMTND49Jg Also check out my buddy John who is the owner of UW Gear and his KZbin channel at Alpha Charlie concepts: kzbin.info

[@johnqpublic2718]

Fuxkin a

[@af22raptor23503]

AWESOME I need a new red dot for a 11.5 inch M4a1 Heavy barrel pistol that I am working on.

[@rideordietheyretring2tranx382]

Lol I was just considering using Flex Seal on my awning

[@FlexSeal]

We are impressed! Great video, Brent0331!

[@TheLimbReaper]

I became a Flex Seal body repair connoisseur with my old GMC pickup truck, so I knew Brent was on to something with the ruck repair - and so I did mine also. I think it was pretty cool that you slicked him up with some goodies. Good job Flex Seal!

[@lauritorni4879]

I just ate some flex seal

[@Cheech45acp]

@FlexSeal give us some matte colors military colors

[@faeryka7813]

Don’t even own a Alice pack but I love your content man, keep it coming!

[@mel-zv6lr]

I like that Apple green for the inside of the large pocket inside,iam sorta blind in one eye and that bright green should help me out...

[@paulshewchuk3016]

british bergens are the way to go

[@DoomHolder2]

Yeah, brown is definitely the way to go the green is just too bright and the almond is too. Maybe you could like layer the almond with some brown and it wouldn't look so bad like with a camo pattern but that's too much work. Nice vid.

[@panzershock441]

Here in BC, Canada right around this time the vegetation is so lush and green that I think it would work great. But it would definately only be perfect around 5 months of the year. Maybe some parts of the US where you get good amounts of rain and sunshine during spring and summer, regions you might label as temperate rainforest, it might work quite nicely.

[@Brent0331]

Thanks brother

[@Spike-13]

That's awesome that flex seal sent those out and support you! Maybe I'll have to go buy some of the brown! (The green and tan were too bright)

[@Brent0331]

Sure is! Thanks for watching.

[@AlphaCharlieConcepts]

Great. Now you've got me wanting to break out my old ALICE and give it a refurb.... Wonder what all else I could use this on (ponders in grunt).....

[@Brent0331]

Ha

[@richstone2627]

I'm down with the brown. The other colors are cool too but really like the brown. Flex Seal should make a Tactical commercial starring you and your crew.

[@darrenneiger7449]

Here’s that comment you wanted me to leave.

[@Brent0331]

Thanks

[@PowermadNavigator]

That tan might work good for similar repairs on a pack which is in some desert tan colors or desert camo colors. The green is nice, but too bright. Maybe would be great if you wanna fix your favorite garden hose with it because you can't find a new one like it or the newer ones just suck. Maybe it might help if you have some sorta signal green colored piece of kit that has lost water repellency, like a goretex-like green police or mountain rescue jacket or smth similar... Wish I could find similar handy products like this on the other side of the planet... you can really find a good deal of use for these sprays.

[@roadhouse6999]

I like how Flex Products aren't just a meme, they're actually a great company that makes good products

[@ldtexas1648]

Now you can go to the cloth store and have them cut you a piece of camo for a pack cover. Flex seal the non camo side. Add bungie cords or paracord around the perimeter. Waterproof pack cover. 🤔

[@markadkins9290]

Outstanding, best flex seal commercial I've seen! Can't believe it's been a year since the first video. This is what all us old jarheads need for our old packs! Keep up the great work, Brent! Are these available for us?

[@Brent0331]

Thanks brother, I know right, time is flying by.

[@americanpatriot6918]

Awesome stuff!!!🤜🤛🇺🇸🇺🇸

[@docback63]

All in all you found a great way to revitalize the lids of the ALICE ruck, which still (in my opinion) has a place out there. I have a few I've scratched my head over wondering what to do about the undersides but thanks to this info problem solved. Great info, thanks man!

[@Brent0331]

Thanks brother, I actually got this idea from one of my viewers!

[@marjank854]

Nice

[@RicArmstrong]

Looks great, but I think the green could be darker. More of an olive green.

[@Brent0331]

Yeah, hopefully they come out with an OD in the future.

[@alancarter4270]

We were issued the Large Alice, its in storage, very cool. Btw I am circa 1980

[@jodywatkins9467]

Thank you!

[@alyhill2226]

Same here 83 to 89

[@garyshaimas7951]

Nice man cave very creative 👍.I just to tell you gunnery Sgt putt out really good vedio have using your video for training good content very perfusonly done Good job ya have a lot more content to gruel over me personally I use the L B E back in the day that's what I. Was trained with 80 / 84 U S Army who ya yes do own T A 50 an use it

[@Brent0331]

Thanks for watching and commenting brother.

[@antalgergo2699]

Looks like old 80's-90's MRE packaging

[@Santiago308]

MRE brown lol!! Here goes another quarantine project, gonna flex seal every fuckin bag I got. Stay safe bro

[@Brent0331]

Ha, the earlier Desert Storm era one for sure.

[@garyedwards1590]

I love the Flex Seal idea, I wanted to ask, did you go right over the old rubber on the lid? Did you remove any of the old before applying, If so, How did you do it other than letting it wear out naturally.. I have a waterproof bag and Alice I would like to do .

[@tsoliot5913]

You can run it through the wash to get some off

[@bravo-six1941]

I just realized my birthday Is on 03-31 of the year I was born, I'm destined to be a Marine...

[@Brent0331]

Nice brother, one of the best MOS's in the Marine Corps.

[@budprepper3811]

A new market for their product. get the colors closer to traditional camouflage and you got a winner

[@Brent0331]

Yeah hopefully they come out with a line of product specifically for tactical purposes.

[@tomritter493]

WEAPON COVER ...great it did hold up outstanding . Great stuff would work on web gear ?

[@rams4d]

Impressive, excellent video, congratulations. Happy New Year.

[@lewucc027]

Harmony Church B-8-2 1984 good work 👍

[@Brent0331]

Thanks

[@elizabethsloan2153]

Nice video. Love ALICE. With gear in plastic bags.......good to go!

[@elizabethsloan2153]

"Clear flexseal then OD green followed by flexseal. Really came out nice and waterproof. Thanks again for the vid. 90ALPHA03

[@jeffwelsh1185]

Where can the brown, green, and tan flex seal be sourced from? I have checked Home Depot, Lowes, Ace Hardware, Walmart, and any other store that Carrie’s hardware or home improvement items. The only flex seal I can find is white, clear, and black. Guess I can just use clear and paint it green. Have you tried using it on the waterproofing on the back side of the USGI Poncho’s? I have an old OD Green poncho that all the rubber water proofing has come off and will probably try the product on it, just wondered if you had tried it and how it worked out. Enjoy all your videos and love the content. Keep it up Devil Dog! Semper fi

[@JesseBCO18]

Semper Fi fellow machine gunner. I was 0331 with1/8 87-90. Have you ever considered spraying the whole ALICE with the Flex Seal?

[@ratagris21]

Great video tutorial and looks like the colors add character to the kit by changing the color scheme. Glad they sent that out to you and support your channel as well as enjoy it.

[@Brent0331]

Thanks brother

[@hardtrooth1776]

Spray the rest with silicone spray like scotch gaurd or the Walmart brand from the camping section.

[@derrickwalker538]

Imagine what Macgyver could’ve done with that!!

[@EternalDeath14]

Those other flex seal colors could work well to texturize old USGI mags.

[@Brent0331]

They might!

[@kurtbaier6122]

Nice need to square away Some of my ALICE gear. I may try it on my buttpack. All my tac gear has been spray painted with rust oleum dark brown krypton tan and a semi gloss medium brown. Browns work all seasons here in the mountains of Virginia and gives me imho a non military look as a civilian now. Did my large ALICE pack in browns but the paint doesn’t stick as well. Lot of touch up. If I remember right you did the same before you deployed to Iraq and all the paint was gone at the end of your tour. I over lay the colors till it matches the leaf duff. Looks good contrasted with civy clothes. As you know surplus and new ALICE pouches do not have a consistent green color and MOLLE is desert colors shock is to bright. I run a condor tac belt with a mix of MOLLE pouches and ALICE pouches held by zip ties. I sewed up my own front chest rig/ dynema plate carrier. Luv your channel. I was a Sgt in the 1970s. Your cammo and other vids KA. Although my back has had surgery I keep my carrying weight low and distributed evenly. At 67 yo I ruck 30 lbs at 3 mph up and down two big hills over each mile. Trying to keep in the fight. I’ve been using a SOL double sized Mylar heat sheet that is bonded to plastic less noisy and have put clear packaging tape in critical attachment points when safety pinning it to a woobie. It pluses up the temp rating and improves it as a expedient shelter.

[@jeffwelsh1185]

Hey Devil Dog, Have you tried turning the Alice pack inside out and spraying the inside of the main compartment, if so, how did it work out for that? Or do you prefer to just use the willy peter bag to water proof your gear inside the pack. Great videos, great content. Semper fi brother

[@elktrip2000]

Hey Brent. I’ve got a molle Pack and the two sustainment pouch’s are super sticky. I have no idea why. Is this just something flex. seal might resolve, or do you have any other ideas? Thanks in advanced.

[@jamesruppert3152]

Id suggest cupping The pocket with like a baseball to give a more round even surface so you're not sprying around the creases

[@desmo5514]

That's a Brilliant job Mate, and a great solution to the lid problem... Bloody well done

[@ARIES5342]

Great idea. If you turned the pocket liners inside out, and sprayed them, would it remove/cover up the stink? Thanks

[@jeffjefferson2676]

It looks like something i want to do with my alicepack. Would it be an idea to do the entire inside of the pack too? Its probably a good idea, it wasnt done originally because its more expensive i suspect. Greetings, Jeff

[@deez420nuts69]

My dad had an Alice Pack he used for repelling, rock climbing, and hiking in Zion National Park, I grew up using the same pack as a combat bag fighting invisible VC by the time I was 8, and use it currently (I'm 19 now) as my airsoft bag. I got everything I need in there and my HPA Tippmann ziptied to the side. Grab the bag and it has everything I need. All I gotta do is throw own some surplus fatigues and it's killing time. The pack is freaking invisible.

[@Brent0331]

Its a great pack, tried and true.

[@loriekaczmarek9788]

Thanks so much for these videos. Have a number of lc1 and 2 packs that need this treatment.

[@RockingLiveShows]

Hey, so this just will work fine to repair a us army poncho. Right? I got one that has no water repellency so i only use it as a sun shade.

[@ldtexas1648]

Just wondering if the dried Flexseal is rubbery or a plastic texture. Wonder if things would drag on it.

[@abandonedotter4270]

I wonder if you could turn the pack inside out and spray it to make it water proof. I mean, I have dry bags but it might be worth it.

[@Riceball01]

I wonder what would happen if you sprayed a base coat of brown or black and then sprayed the green on top before it dried? Would the colors blend? If that works to darken the green, then the same should work with almond by spraying down a base coat of brown.

[@dalevodden1359]

Yeah that flex seal is good I didn't know they came up with the other colors though that's nice and one day I'm going to get me an ALICE pack it's going to be a large one and that is what I was going to do with it I mean when I saw your video when you first did it and I was thinking I'll bet you two to one he's going to use flex seal and when you mentioned it I was right cuz that stuff does work you have a good day and take care later

[@spartan9507]

11/10!!!!

[@idkzero]

Was thinking of doing this to my alice pack. I couldn't think of any way of repairing the lid on her.

[@hitman142002]

Is there a reason you don't do this to the OUTSIDE of the flaps?

[@ryanfryman4029]

I tried this on my pack and the flex seal just cracked off when dry. Any tips? I used the clear if that matters.

[@tsufordman]

My niece was highly disappointed in the time it took me to dig up a steel water line and repair it because I could have just sprayed Flex Seal on it and been done like on TV!

[@wranglerman1205]

The green is a little bright but the brown and tan are cool. If I could find it I’d buy it ! Did they say these are special order or available soon everywhere ?

[@recondo886]

I used flex seal on GI issue water proof bags that are used in the 3 exterior pouches on a large Alice ruck.

[@tsoliot5913]

Nice. I'm wondering if you could turn the pockets inside out and get some inside them too

[@FrontierResolve-xt6vs]

Great Video! We would love to send you our new Fortitude frame to try out, shoot us a line when you get the chance!

[@Kightravin]

Will do this to my alice and the main compartment. Its going to be awsome.

[@williamhad]

Did you lose weight or something? You look younger here than videos from years ago

[@budprepper3811]

I just flex sealed my 2 Alice packs 👍👍👍

[@thegardenguy9160]

Could you do this to the entire pack on the inside but leave some space at the bottom for drainage have you ever done that?

[@robbymorris651]

Outstanding idea!! My lids were trashed.

[@marcosmacoeove5915]

Right, I did the same thing to my M-1945 sleeping bag case, and some of my canvas tarps. Yeah... it adds weight, but increases the durability by far.

[@Brent0331]

Nice

[@GUARDIAN.13]

Yeah that brown is amazing. The other two need toned down a lot in the brightness scale, way too bright

[@vikingskuld]

Hey cool video thank you for the info..

[@nomadmarauder-dw9re]

C'mon, man, do the whole pack!

[@btooger]

Why not do the whole interior of the pack?

[@abandonedotter4270]

The green is kelly green. I tried it on my Alice.

[@1187travis]

Awfully nice for FlexSeal to provide a "Gift Pack" to you. Brown... definitely brown.

[@Brent0331]

I know right! Very nice. I love that brown color too.

[@loweaguirre454]

Awesome video !!! I am going to buy a can for My Willy Pete bag. It has a lot of pin holes in it. Do You have a video on the large A.L.I.C.E pack? SEMPER FI. 0331 95-03

[@Brent0331]

Let me know how that works. I was thinking about doing the same to one of my WP bags.

[@af22raptor23503]

Bravo-Zulu! Thank you for the Heads up on the Flex Seal Devil Dog I have an Old Alice Pack that I have owned for over 25 years now and has gone with me everywhere it has lasted longer than the Pack that I was Issued by the Navy back in '05 and only lasted one deployment. I have been wondering what I could do to make the cover water repellent again that this looks GREAT will be going out to my local wallyworld tomorrow to get some FLex Seal.

[@Brent0331]

Awesome brother!

[@whomagoose6897]

If Flexeseal makes a darker color green, like an Olive Drab green. They got a customer. Been looking for something to re-coat the top flap on my ALICE, large ruck. An Olive Drab green would be a fairly close match to the original coating.

[@Brent0331]

Agreed, but the current brown is pretty slick I think. Hopefully they do make more tactical oriented colors in the future.

[@robertmartin442]

Awesome

[@markottinger]

Brown is definitely the best of the three. Looks a bit shiny but maybe it will dull out when fully cured. FLEX SEAL if you can use true camo colors your product would be very useful. Thanks Brent0331

[@Brent0331]

Thanks for watching brother.

[@usmcsgt4881]

Have You Thought About Turning The Alice Pack Inside Out And Apply Flex Seal To Make It A More Water Repellant Pack

[@Brent0331]

Yes, I recommend not doing that though, you need your pack to drain water. Your gear should be kept in a WP bag which keeps things dry plus turns your pack into a flotation device for water crossings.

[@jasemac5391]

Would it work OK if you done the whole outside of your ALICE Pack Brent or would it crack up 👍🏻🇦🇺 cheers Brother from across the pond ;)

[@Brent0331]

I wouldn't do the outside, If you're going to do anything do the inside.

[@christopherlarsen7788]

Brent - Watching your video last year, I re-sealed the top of two of my ALICE rucks with black Flex Seal. Man, I really like that brown! I had no idea that was even an option. Plus, I hadn't thought about sealing the external pocket lids. Looks like I have another project. Fun stuff. Thanks.

[@Brent0331]

No problem Chris, the brown is legit, I really like it. Reminds me of the brown colored webbing seen on a lot of Nam era gear.

[@eltenda]

pretty cool how to!!

[@hrdknox2000]

I did this and mine did NOT hold up!

[@trevormurphy7041]

Just picked up another Canadian Digital camo rucksack now I got a buy a can of flexseal I just had an idea popped in my head I got a couple of spots I want to Stephen up in the bag i’m gonna try to use some of that JB Weld reinforce some parts of the bag make it stronger I really miss surplus stores there’s none here in Newfoundland everything is online today that sucks There’s no experience when you go online shopping it takes the fun out of it

[@Brent0331]

NIce

[@scoper04]

Full of shit. I did mine and it didn't even last a year before it pretty much looked the same as it did before I repaired it. Cracked and peeling.

[@Brent0331]

Respray it, takes 5 minutes. Its a quick fix not a one and done. The alternative is sewing on some sort of waterproof liner, how long does that take. I'll stick with a 5 minute rattle can job when needed.

[@marshalltravis3217]

❤️ my Alice packs.

[@ProbablyTooLoud]

What always amazes me about an Alice Pack is how much unnecessary stuff I can squeeze into it and can't find when I need it. Reminder to self: Pack less !

[@Brent0331]

Ha

[@robfahey1349]

Man I had higher hopes for those other colors that green was horrible need to get it closer to the od or ranger green or maybe even foliage. The brown was the best I have to agree with you. The almond probably takes 2nd but was too bright needs to be darken up some like khaki. Although I'm sure after this video flex seal will pay attention and find they have a market for this with military, hunters and such to bring more military color patterns

[@Brent0331]

Brown was the best for sure, hopefully they have more tactical oriented colors in the near future.

[@samwilliams5283]

Nylon tent water proofing. Does in come in navy blue? Flexseal take note camo colors a big plus. I do have an Alice and frame.

[@Brent0331]

Check out their website in the link I have in the information box, they have different colors that aren't available in stores.

[@patriott3087]

Painted some trouble spots on a boat bottom with black flex seal . It's not leaking any now . It has a sticky rubbery feel to it and paint will definitely not stick to it and neither will primer . Slides in and out of the truck with no problem , but wouldn't recommend coating the entire bottom . Just hit the necessary places . It's pretty tough too .

[@Brent0331]

Awesome! Thanks for sharing.

[@redranger1949]

Ah yes the old Alice pack i prefer it over the ACU pack Mix the almond and brown perhaps?

[@Brent0331]

Yup, great pack.

[@stevenbuckley1416]

Agree with the brown nice job 👍🤝🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@Brent0331]

Thanks brother.

[@Mills141]

Had 4 colors and just put layers? Guess I'll make a video on a camo pattern... thanks for the inspiration

[@Brent0331]

Cool man, I'll be interesting to see.

[@DogeMcLovin]

THAT'S A LOTTA DAMAGE

[@Brent0331]

Ha

[@mikebennett7149]

Mike 0331 here turn pack inside out and do the whole thing stuff works amazing

[@Brent0331]

Did you do the whole pack already?

[@rlip67x36]

Hey brent i love your vids I think u should test central Europe camoflauge

[@Brent0331]

CCE? Already did it.

[@dam1041960]

As always a faithful viewer thank you Brent 0331. 🇺🇸🦅🌎⚓,⚔🎯👹🐕💯

[@Brent0331]

S/F brother

[@michaelrossotto5381]

Great idea. Can't wait to try it

[@RockMonger]

Yea maybe you could use the other 2 in a camo if done right. But they were both very bright. Brown was definitely good.

[@Brent0331]

Hopefully we see some more colors out of them in the near future.

[@airsoftghost]

That's pretty cool Brent. Thanks for the great information.

[@Brent0331]

Thanks for watching!

[@unclejohnbulleit2671]

Thanks for this, I got to repair mine soon, now that I know how to do it.

[@Brent0331]

Awesome

[@bp93yj]

Took your idea and applied it to the entire inside of my buttpack. It worked great it did darken the outside a little. It jus t added character. My alice pack lid looks great. Thanks

[@Brent0331]

Glad it helped!

[@fiveseven76]

I always thought flex seal was gimmicky BS. Have you ever used plasti dip? Same, close?

[@therealbigfoot3076]

They have a roll of black rubber it's supposed to be for pipes.. but that stuff is beautiful also for repairs I use it on everything

[@Brent0331]

I haven't, but I know some folks that have used that, haven't seen their packs first hand so I don't know how they are holding up.

[@nuclearjanitors]

God tier pack.