Finally ! My slayer mod is finished. The one and only struggle I had to deal with was, getting a piece of silicone that would fit in the hot water spigot.
@CabeensCoffeeCorner11 ай бұрын
Hope You enjoy
@mtpastor45463 ай бұрын
This is awesome to turn this machine to another level Can you replace the vibration pump to rotary pump as well?
@CabeensCoffeeCorner2 ай бұрын
you can, i havent though
@droidtigger2 жыл бұрын
Thanks very much for the easy to follow tutorial. There isn't another one like it! However, I think you forgot to mention that you need to block the spigot. I'm guessing that's what the silicone was for.
@CabeensCoffeeCorner2 жыл бұрын
Yes the video cut out there :( thanks for the encouragement though
@droidtigger2 жыл бұрын
@@CabeensCoffeeCorner I figured it out anyway lol. I've been looking for a clear mod for ages. This video was so easy to follow (and succinct) that I did the mod. That's how I found out about the spigot lol. Thanks very much. Could you possibly add it to the description?
@fgarced6 ай бұрын
Hi, this mod is more flow profiling and not slayer. Slayer is static "pressure" preinfusion saturating with 40g to 55g in 25 seconds then full pressure in 9 bars. This mod you have a wheel that you can change dynamic (any time) the flow in the preinfusion and brew process. This mod is very nice and give this Breville DB a higher level in espresso machine market.
@CabeensCoffeeCorner5 ай бұрын
I’ve never tried the slayer, but I’ve this is a pretty known name for the mod
@pokolotrovo Жыл бұрын
Thank you for this video.I think that all the community was looking for an easy tutorial like this for years. I just have two questions, the spigot thing is not clear to me. It is mandatory to cap it? Second, can we perform the clean cycle as usual with this mod? Thank you and congrats!❤
@CabeensCoffeeCorner Жыл бұрын
Yes you have to cap it and yes it still works
@toivivu5 ай бұрын
Can you have photo how and where to cap it. Thanks
@JamesPolacek Жыл бұрын
Do the 1 cup and 2 cup preset functions still work with this mod done?
@CabeensCoffeeCorner Жыл бұрын
Sure does! Everything but the hot water tap
@desmondlewissmith Жыл бұрын
I am not sure what slayer mod does
@CabeensCoffeeCorner Жыл бұрын
It allows you to control the flow of water from the group head
@jlyt18 Жыл бұрын
can you still pull a regular 9 bar shot without tending to the knob or machine?
@jlyt18 Жыл бұрын
also thank you for finally making a easy to follow video tutorial lol i was holding off on doing this
@CabeensCoffeeCorner Жыл бұрын
Glad it it helped! Just simply leave the know open and it operates as normal. I typically control flow rate in my shot but my wife does not!
@jlyt18 Жыл бұрын
@@CabeensCoffeeCorner and how do the programable buttons work then? same? open knob to full and press for regular function?
@jlyt18 Жыл бұрын
@@CabeensCoffeeCorner do i have to mark on my machine where 9 bar, 6 bar, and 3 bar are?
@TroyHowarth10 ай бұрын
@@CabeensCoffeeCornerthis is great news! I wanted to do this mod but was worried my wife would kill me if I made it difficult for her to get her single click shot.