BrewBuilt X3 UniTank overView

  Рет қаралды 4,637

Portly Gentleman

Portly Gentleman

Күн бұрын

Пікірлер: 72
@Toelishness
@Toelishness 3 ай бұрын
Great video! As someone coming from a spike conical, this will be a welcome upgrade from the constant pressure leaks.
@PortlyGentleman
@PortlyGentleman 3 ай бұрын
@@Toelishness yes It definitely will. In my opinion those are long obsolete units 🍻
@TheBruSho
@TheBruSho 7 ай бұрын
Happy to know that Home Brewing is still good!
@PortlyGentleman
@PortlyGentleman 7 ай бұрын
You are the man Trent 🍻
@brucecampbell8355
@brucecampbell8355 7 ай бұрын
Great tip about rotating the lid to find its "happy space"!
@PortlyGentleman
@PortlyGentleman 7 ай бұрын
Thank you very much. It's those little technical insights that hopefully sets me apart and keeps you coming back. I really appreciate the support.
@homebeerbrewery
@homebeerbrewery 7 ай бұрын
That looks like a very nice uniTank! Thanks for sharing this information and the effort to make this video. Pro video again ☺Cheers Bradley 🍻
@PortlyGentleman
@PortlyGentleman 7 ай бұрын
Thank you my friend 🍻
@jpriestl
@jpriestl 3 ай бұрын
Love your content! I bought one of these after reviewing your and other content. I have my third batch in now. Would love to see a follow up on your teardown and post ferment cleanup. Do you do CIP? Do you then also remove EVERY triclamp for a PBW soak as well? Do you run back to back batches, or is it idle for a time between. I did CIP PBW, CIP Rinse, then tore it all apart and did a PBW soak and rinse of all the parts. Then on my next brew day I did a 30 min sanitizer soak of all the parts, reassembled wet, and did a CIP no foam sanitize after assembled. Wondering if there is any opportunity to shorten the cleaning efforts... I'm using the Blichman Riptide Pump and the BrewBuilt CIP ball in my setup and I added a 3" TC to 1/2 barb so I can recirc from the bottom or also dump/pump directly to a floor drain. Using this with the BrewBuilt 4 unit chiller and love how quickly I can cool a wort. Summer here means 70F tap water, so coming out of the kettle cooler at about 82, and got a stable 70f in about 2 hours.
@PortlyGentleman
@PortlyGentleman 3 ай бұрын
I'm definitely doing a follow-up. When the tank is dirty, I first rinse with my CIP ball hooked up to Maine's water pressure via a hose. I do this to rinse all the gunk out before. I run PPW at about 140° . That's done. I take everything apart and soak any parts that need it in the same PBW that just came out of the tank. After that I assemble everything, try clamps and sanitize all the o-rings. Before I fill the tank I do a a CIP run with a no foam acid-based sanitizer. I let it spin for about 30 minutes then drain it out. This method hasn't failed me yet. Riptide will definitely get the job done. I've switched to a spike flow only because I have it available. It is a better pump but no need to upgrade if you're happy.
@jpriestl
@jpriestl 3 ай бұрын
@@PortlyGentleman Thanks for the quick reply, sounds like we are doing similar process. I also did CIP rinse first while draining to floor drain... a bit more time than the Grandfather unit, mostly just taking all the clamps on and off, but I'm loving the flexibility. I've done a Belgian pale, a citra blonde ale, and currently a Belgian dubbel going. Next up will be a big Marzen batch to lay up for fall, and then looking forward to trying dry hopping with the bong on a NEIPA that's been on the to do list.
@jpriestl
@jpriestl 3 ай бұрын
@@PortlyGentleman The Riptide was not enough pressure for the generic CIP ball I had, but I works great with the BrewBuilt ball. BrewBuilt ball also has a longer arm, so you can mount it up top on the pressure lid and it gets everything....I pulled various clamps off while rinsing to verify.
@OneBedWarehouse
@OneBedWarehouse 2 ай бұрын
I see the website states the pressure pack allows you to “…ferment, carbonate, and even serve all in one vessel.” I’m going to struggle to fit a kegerator in my apartment and I’m keen to keep things as minimal as possible so very interested in serving straight from the fermenter - what would be the best way of going about this, glycol chiller and co2 tank then pressure pack value straight to tap? Any potential drawbacks? Torn between this and the f series now 😮. Love your videos, subscribed!
@will5430
@will5430 3 ай бұрын
awesome review. I gotta get one of those. did you get their glycol chiller?
@PortlyGentleman
@PortlyGentleman 3 ай бұрын
I do have one of their units. It's pretty good energy wise and power wise when compared to others in the same category.
@beattyj8
@beattyj8 7 ай бұрын
Very nice, and jealous of those welds and of the 8" port instead of a banded giant seal to worry about. I still love that my Spike CF10 will fit inside the RAPT Fermentation chamber, and that I can run a 2 keg batch with no glycol. Honestly it's so simple it feels like a cheat code until I have to clean the MF...er...CF. I keep hoping that BrewBuilt will come up with a nicer (stainless) unitank that is purpose-built to work with the RAPT chamber, but I think i'm in the minority not wanting to mess with glycol or separate heaters.
@PortlyGentleman
@PortlyGentleman 7 ай бұрын
I would agree. I have a feeling that someone's going to release one shortly to be honest and by shortly I mean in the next 2 years lol 😂 🍻
@DavidHeathHomebrew
@DavidHeathHomebrew 7 ай бұрын
Nicely done Bradley as always. I really like my X2. I look forward to the X3 making its way to Europe!
@PortlyGentleman
@PortlyGentleman 7 ай бұрын
Thank you David. It's definitely the culmination of their work.
@gerber8915
@gerber8915 5 ай бұрын
I wish I was still into brewing beer. The now Ex-W made me get rid of all my equipment because she didn't like my hobby. Wish I got rid of her first, 😂😂
@PortlyGentleman
@PortlyGentleman 5 ай бұрын
💯😂
@brewpilot8958
@brewpilot8958 17 күн бұрын
Any idea where the lower end of the jacket is at? Basically, what’s the minimum size batch you can make with the jacket still functional?
@lamehunter
@lamehunter 2 ай бұрын
I would love to see comparison of this to brewtools equivalent unitank
@PortlyGentleman
@PortlyGentleman 2 ай бұрын
Maybe the 40 L light ?
@lamehunter
@lamehunter 2 ай бұрын
@@PortlyGentlemanhell yeah!
@PortlyGentleman
@PortlyGentleman 2 ай бұрын
Happening 🍻
@kimeinvik
@kimeinvik 7 ай бұрын
Just ordered two X2’s a couple of days before the launch of the X3…. Got them home here on Monday. But no “welcome package” 😔 (ordered through European supplier though…) just waiting on a couple of parts now, which i forgot to think about, then i will try it.
@PortlyGentleman
@PortlyGentleman 7 ай бұрын
I'm thinking you will still enjoy them!
@africantwin173
@africantwin173 6 ай бұрын
I'm very anxious to know which European supplier u got those Fermenters from. Could you please tell me which one?
@jpriestl
@jpriestl 3 ай бұрын
Thanks!
@PortlyGentleman
@PortlyGentleman 3 ай бұрын
Thank you 🍻🍻🍻
@nathanterault3064
@nathanterault3064 4 ай бұрын
Nice review thanks man!
@PortlyGentleman
@PortlyGentleman 4 ай бұрын
That's not quite a review. There is more on the way but thank you 🍻🍻
@Hacky2447
@Hacky2447 Ай бұрын
How does this compare to every other china made conical? How is it compared to spike brewing?
@PortlyGentleman
@PortlyGentleman Ай бұрын
Compared to Spike this tank is on another level, I personally don't see a reason to buy one of their tanks in 2024, not to mention 2025....
@africantwin173
@africantwin173 6 ай бұрын
No Brewbuilt X3 in EU. No International shipping with Brewbuilt sadly 😭
@PortlyGentleman
@PortlyGentleman 6 ай бұрын
I thought @themaltMiller and the UK carried their stuff ...
@africantwin173
@africantwin173 6 ай бұрын
@@PortlyGentleman The UK left the EU on 31 January 2020. So that means 35% extra import VAT taxes and handling fees when ordering from The Maltmiller. A nogo for private customers. Morebeer USA should used the same international shipping system as Brewtools has. That means offer a Fermenter including shipping and VAT cost worldwide. If I should order a fermenter from the UK and import it to the EU then pricewise it should be in the same price range as a Brewtools Fermenter.
@Wind_Ninja_Jubei
@Wind_Ninja_Jubei Ай бұрын
Since this is tri clamp can this be pushed up to 30psi?
@FL060
@FL060 7 ай бұрын
Do you prefer the x3 instead of the brewers hardware insulated jacketed Unitanks?
@PortlyGentleman
@PortlyGentleman 7 ай бұрын
That depends on your fermentation location/ ambient humidity.
@wickedbeernut
@wickedbeernut 7 ай бұрын
Is the Brewers Hardware fully-insulated, fully-jacketed (cylinder and cone) conical unitank still a thing? When was it last in stock? Spike has announced a fully-jacketed conical unitank. I have my fingers crossed it will also be fully-insulated.
@FL060
@FL060 7 ай бұрын
It’s always out of stock when I check. I have been wanting to buy one. I saw the X3 drop n wanted to know more. I saw the spike posting on their website. I think it’s just going to be jacketed. But fingers crossed on the insulated too! I just hope it’s a TC lid not a band the cf’s have. I like my cf5 but I’m not a fan of the band clamp.
@wickedbeernut
@wickedbeernut 7 ай бұрын
@@FL060 This is all we know about the new line of Spike Premium Conical Unitanks, * Fully-Jacketed (cylinder and cone) * Splayed Legs (like the BrewBuilt X3-series) * Welded Lid (no goofy full-lid clamp/gasket) * 25-50% More Expensive Than Existing CF-series * Spike Will Continue to Offer CF-series I've never seen a fully-jacketed unitank that isn't fully-insulated. We shall see.
@FermentationAdventures
@FermentationAdventures 7 ай бұрын
Beautiful equipment, but the flex chamber feels hokey to me.. I bought one for my Spike conical and never used it, and attach to the cone a bf valve, to sight glass, to 90°, to bf valve. The horizontal ports on the cone are pretty sweet tho…
@PortlyGentleman
@PortlyGentleman 7 ай бұрын
To each his own, I found the new one with the 3-in tri-clamp to be pretty useful so far 🍻
@MikeN1990
@MikeN1990 7 ай бұрын
Seriously thinking about getting one of these or another mini uni+. I love the mini uni+ but I feel after getting all the extra stuff necessary to make it actually usable, you are spending nearly as much as this. The mini uni+ is my only fermenter currently outside of some 6.5g kegs, do you feel the quality of the x3 is up there with the brewtools stuff?
@PortlyGentleman
@PortlyGentleman 7 ай бұрын
Based on the unit that I have in my possession, I would honestly say yes. Brewtools Definitely uses a far thicker stainless steel, there's no arguing with that. So as long as you don't drop it probably okay lol even then I bet it's fine.
@MikeN1990
@MikeN1990 7 ай бұрын
@@PortlyGentleman haha thanks for the input! Think I’ll get one on the way, let me check that description for a link :). Looks hard to beat for the price
@marklpaulick
@marklpaulick 7 ай бұрын
Great design, thing of beauty. Definately right there with the brewtools. I still wouldnt want to clean it, although the jacket helps. I got ride of a spike unitank cuz I never wanted to clean it.
@PortlyGentleman
@PortlyGentleman 7 ай бұрын
Cleaning so much fun!😮‍💨🍻
@TheApartmentBrewer
@TheApartmentBrewer 7 ай бұрын
Still not enough ports!
@PortlyGentleman
@PortlyGentleman 7 ай бұрын
So many parts to clean. Not enough time 🤣🍻
@wickedbeernut
@wickedbeernut 7 ай бұрын
I agree. BrewBuilt came up short in terms of cone ports, especially considering the X3-series doesn't have a dedicated racking port. I prefer the Brewtools F-series with the four 34mm tri-clamp ports on the lid with an 8" tri-clamp port (which is typically stepped down to 3" for a hop drop) versus the rather crowded 1.5" tri-clamp ports on the X3-series lid. Let's hope Spike gets it right with their new Premium Fully-Jacketed (cylinder and cone) Conical Unitank.
@creamyfnpints4559
@creamyfnpints4559 7 ай бұрын
Overkill? How many ports do we need? Bradley I love the vids but this unitank seems ridiculous to me. I need a spund, temp probe, dump valve, raking arm and I win. Glycol chill is super nice but I think this unit would reject my homebuilt glycol chiller.
@PortlyGentleman
@PortlyGentleman 7 ай бұрын
It's definitely better to have an extra Port than to need a port and not have one available 🍻
@garethsmith2250
@garethsmith2250 7 ай бұрын
Let's see you use it please not just promo click based videos
@PortlyGentleman
@PortlyGentleman 7 ай бұрын
If I didn't put out this kind of video first, how would I get you to comment? 🍻
@davidpinnington213
@davidpinnington213 7 ай бұрын
Now this IS piece of stainless goodness - looks a serious competitor to the BT F series heating looks to be a issue but I have good luck with the AliX 25w heating bands via STC1000's and now that BB have lost the band (and thre not getting back together) for my next fermenter this is on my list over a BT Uni (once they ship X3 to UK of course)
@PortlyGentleman
@PortlyGentleman 7 ай бұрын
Of course 🍻
@wickedbeernut
@wickedbeernut 7 ай бұрын
BrewBuilt has incorporated the Brewtools F-series 2" tri-clamp horizontal cone port for an ultra low-watt density immersion heating element. It doesn't get much easier than that. This will become the industry standard.
@timheffernan3577
@timheffernan3577 7 ай бұрын
Looks like a well-deisgned unitank
@PortlyGentleman
@PortlyGentleman 7 ай бұрын
Absolutely! I wonder what the next innovation will be ?
@timheffernan3577
@timheffernan3577 7 ай бұрын
@@PortlyGentleman I've given some thought about this and think we are getting close to the perfect unitank
@PortlyGentleman
@PortlyGentleman 7 ай бұрын
🍻💪💰
@timheffernan3577
@timheffernan3577 7 ай бұрын
The PTFE gaskets work much better in the large sizes
@PortlyGentleman
@PortlyGentleman 7 ай бұрын
That's a good point. They actually include them in the inch and a half size as well as the 2 in interesting..
@timheffernan3577
@timheffernan3577 7 ай бұрын
@@PortlyGentleman I'm sure it's about cost. They are much more expensive. I haven't tried the Buna gaskets yet but they may also be more rigid
@biggirlollie
@biggirlollie 7 ай бұрын
That thing is sexy AF 🤩
@PortlyGentleman
@PortlyGentleman 7 ай бұрын
Yes it is
Vevor Chamber Vacuum Sealer DZ-260C Six Month Review
4:18
SEWKODIAKLIFE
Рет қаралды 3,3 М.
GearGab: Pearl Drums CPR 1278 Adaptor
8:36
DrumMenace
Рет қаралды 399
Turn Off the Vacum And Sit Back and Laugh 🤣
00:34
SKITSFUL
Рет қаралды 8 МЛН
Миллионер | 3 - серия
36:09
Million Show
Рет қаралды 2,1 МЛН
Quilt Challenge, No Skills, Just Luck#Funnyfamily #Partygames #Funny
00:32
Family Games Media
Рет қаралды 15 МЛН
BrewZilla G4 Upgrades & Must Have Accessories
14:38
Portly Gentleman
Рет қаралды 3,8 М.
BREWBUILT X3 JACKETED UNI CONICAL FERMENTER | THE MALT MILLER HOME BREWING CHANNEL
18:15
The Malt Miller - Home Brewing Channel
Рет қаралды 3,4 М.
THINGS YOU SHOULD KNOW About Using CONICAL FERMENTERS
22:50
TheApartmentBrewer
Рет қаралды 35 М.
Best fermenter in 2024?
9:31
Hops & Gnarly
Рет қаралды 9 М.
IS THIS THE ULTIMATE FERMZILLA SET UP? | THE MALT MILLER HOME BREWING CHANNEL
20:19
The Malt Miller - Home Brewing Channel
Рет қаралды 4 М.
The NEW BrewBuilt X3 Jacketed Uni Conical Fermenter
6:46
BrewBuilt
Рет қаралды 7 М.