BRICKLAYING...RUSTY ANGLE IRON REPLACEMENT WITH NEW GALVANISED LINTEL...PART 2

THIS WEEK WE REPLACE A 2ND OLD ANGLE IRON LINTEL WHICH IS RUST DAMAGED AND HAS "BLOWN". WE SWAP IT FOR A NEW GALVANISED ONE AND REPLACE THE CAVITY TRAY ABOVE IT TOO .
MANY HOUSES HAD THESE OLD POOR QUALITY STEEL ANGLE IRONS INTALLED IN THE 60S ,70S AND 80S AND NOW MANY HAVE DETERIORATED AND STARTED TO DAMAGE THE HOUSE BRICKWORK.
THE RUST STARTS WHEN THE LINTEL GETS WET FOR LONG PERIODS OF TIME . ONCE IT STARTS IT CANT BE STOPPED. THE RUST EXPANDS VERTICALLY AND EVENTUALLY LIFTS THE BRICKWORK ABOVE WHICH IN TURN OPENS UP CRACKS LETTING IN MORE WATER AND SPEEDING UP THE PROCESS.
ON THIS HOUSE THE BRICKS (LONDON TUDOR) WERE POOR QUALITY AND THE SAND AND CEMENT WAS TO WEAK TOO MEANING THE WHOLE WALL WAS VERY POROUS .
MANY PEOPLE SEE THE TELL TALE CRACKING AT EACH SIDE AT THE TOP OF A DOOR OR WINDOW AND JUST HAVE IT POINTED . ALL THIS DOES UNFORTUNATELY IS MAKE IT LOOK BETTER , ONLY REPLACING THE LINTEL WILL CURE THE PROBLEM
THIS LINTEL IS A BIT AWKWARD TO PROP AS WE WERE ON A SCAFFOLD. WE PUT THE ACROWS CLOSE TO THE VERTICAL SCAFFOLD TUBES FOR STRENGTH PLUS WE WERE ONLY PROPPING A SMALL PORTION OF THE PIKE ABOVE SO IT WASN'T TOO HEAVY .......ENJOY 👍🏽
#ACROWPROPS #SCAFFOLD #LINTELS
Business only contact : e mail .. ken
[e-mail]
Instagram .. steve_and_alex_bricklaying

[@davidcaira1070]

Clearly These aren’t bricklayers

[@SteveAndAlexBuild]

Who ?

[@davidcaira1070]

The guy doing the joints

[@SteveAndAlexBuild]

@@davidcaira1070 You are right we are a couple of chancers with over 22 000 subscribers and over 5 000 000 views on our bricklaying channel . That’s a bit of luck isn’t it 😆

[@davidcaira1070]

@@SteveAndAlexBuild so?

[@SteveAndAlexBuild]

@@davidcaira1070 indeed

[@llamedosr7843]

I like the way you tucked that mortar in. I learned something today

[@SteveAndAlexBuild]

llamedos R . Glad you like it , a miserable old bugger called jack taught me that about 25 years ago . Thanks for watching and commenting 🧱👍🏼

[@dennisphoenix1]

You can use a finger trowel to fill in gaps like that

[@26raa01]

Nice work Steve and Alex a few other things I do when replacing lintels are 1 - using arbortech AS170 saw with my FESTOOL MOBILE DUST EXTRACTOR cut out the bricks in one pieces so you can reuse them it's a lot faster cleaner then a disc cutter and a lot easier no silica dust flying all over the place then you're wasting time cleaning up all the dust afterwards as we say time is money but also health is number one to yourself and others around you 2 - steel lintels expand and contract in warm and cold weather as you know when I install new Steel lintels at the ends i use Miothene Joint Filler and then there is room for the expand and contract to take place and there will be no cracking in the wall you will have 100% peace of mind when you finish the job 3 - when installing a new cavity tray i turn up the ends I also brush a thin layer of black jack dpm on the front of the steel lintels and stick my Visqueen Polythene Damp Proof Course so it doesn't slip forward 4 - I always get the steel lintels two days before the jobs starts i will use anti corrosive red oxide paint and give them two coats then I know they are finished to my standards and not that of the steel fabricator nice to see you both taking pride in your work keep up the videos as I like to see them when I've got some spare time

[@SteveAndAlexBuild]

voodoo audio . Thanks for the tips , we will bear them in mind . Glad you enjoy our channel too . 🧱👍🏼

[@LightGesture]

Make your own video

[@learner-long-life]

Inspiring video, you're the only ones who showed the acrows and why it's necessary to to jack them up a few courses up.

[@SteveAndAlexBuild]

Thanks Paul 🧱👍🏽

[@macplastering]

GOOD job lads

[@SteveAndAlexBuild]

mac plastering . Sorry pal I never got a notification about your comment, I always try and reply to them all so thanks very much and thanks for watching 🧱👍🏼

[@macplastering]

@@SteveAndAlexBuild Same here buddy , sometime i dont get them either never worry and keep the good work up :)

[@jimjam1934]

Another great job lads

[@SteveAndAlexBuild]

Jim Jam Thanks pal this was back in April before it was -1 outside 🥶😬😂😂

[@danielmaclellan7003]

Nice, thanks for this! I do wish you showed more of the cavity tray installation and reinstatement of the brick on top of the lintel. For a rookie like me who is trying to learn, that would have been great for me.

[@SteveAndAlexBuild]

Daniel MacLellan Thanks Daniel , there are some other lintels vids on our channel , hopefully they might be more helpful for you . Thanks for checking out our channel 🧱👍🏽

[@tejanikerroumi9633]

Good job I learned something ❤❤❤❤

[@SteveAndAlexBuild]

🧱👍🏽

[@STEADYEDDIE880]

More great work guys 👍👍

[@SteveAndAlexBuild]

STEADYEDDIE880 Nice one , thanks pal 🧱👍🏼

[@markdwyer100]

It just nice to see the way other people do it

[@SteveAndAlexBuild]

mark dwyer .Certainly is , we watch plenty of this type of video too 🧱👍🏼

[@roygregory8334]

Looks good.

[@SteveAndAlexBuild]

Roy Gregory Nice one thanks Roy 🧱👍🏽

[@ronniebiggs4026]

Perfection 👍

[@SteveAndAlexBuild]

Ronnie Biggs .Thanks pal and thanks for watching and commenting 🧱👍🏼

[@MÃONAOBRACONSTRUÇÃOCIVIL]

EXCELENTE TRABALHO MEU AMIGO

[@SteveAndAlexBuild]

MÃO NA OBRA MIRO STARSUPER 🤝👍🏼obrigado

[@itsmewayne428]

Smashing job lads..you'd never know you were there :)

[@SteveAndAlexBuild]

Wayne Bailey nice one , thanks Wayne . We’ve been filming in the foundations this week 👍🏽🧱

[@itsmewayne428]

Brilliant..I enjoy the trench work...hope the mud hasn't been a pain :)

[@SteveAndAlexBuild]

Wayne Bailey 😳bloody awful at the moment ! 🧱👍🏽

[@joanneferndale101]

excellent, thank you

[@SteveAndAlexBuild]

joanne fergus 🧱👍🏽

[@fretwell2k7]

Could have done a bit of talking through it. But it was just what I was looking for. God I love KZbin saved me loads of money over the years 😂👍

[@SteveAndAlexBuild]

😁🤙🏾🤙🏾🧱👍🏽

[@thegreatbritishbikeoff]

Did you attempt this yourself? How did it go?

[@SteveAndAlexBuild]

@thegreatbritishbikeoff . 🤔🤔

[@thegreatbritishbikeoff]

Hey @steveandalexbuild what’s the product you used for sealing the flashing?

[@SteveAndAlexBuild]

Anything cheap and sticky 🧱👍🏽

[@antonios4926]

Thanks for the video. Great work as usual. Love the reply ( thanks for your input) to the one who said your HORRIBLE POINTING. Lol

[@SteveAndAlexBuild]

😆😆. Thanks pal 🧱👍🏽

[@EternalXPE]

Thank u for the video. I have a question. Can the angle iron be welded/connected to another angle iron so is longer. I'm trying to extend it?

[@SteveAndAlexBuild]

Not ideal I’m afraid 😬🧱👍🏽

[@adriandotsmall]

👍 what was the nail for you put in just above the lintel?

[@SteveAndAlexBuild]

Stops the lintel from falling back as they tend to roll back sometimes 🧱👍🏽

[@jforrest93]

Class work lads.... in the case of 1960 house, 2meter window pvc. Prev owner installed window and removed load bearing wooden frames and didn’t put lintel in. Can see settlement has occured and mortar above around 8 bricks high has cracked mortar with some play on bricks higher up. What would you guys say cost wise (total estimate) would be looking at as ballpark figure to get a lintel in? Can do most jobs myself but structural/ brickwork isn’t my expertise... again top job there 👍🏻

[@SteveAndAlexBuild]

I’d say about £300 👌🏼🧱👍🏽

[@jforrest93]

@@SteveAndAlexBuild top man 👍🏻give me a plastering trowel anyday 🤣

[@SteveAndAlexBuild]

@@jforrest93 😁🧱👍🏽

[@simsim1293]

I have a question, I want to replace the lintel and was told my baywindow needs to come down as it won't support this. Looking at your video it doesn't seem to be right the information provided. Thank you. What is the estimated cost to do the job you have shown in the video?

[@SteveAndAlexBuild]

Sorry i cant comment on a job i haven't seen in person i'm afraid 🧱👍🏽

[@wp869]

Please can you answer me quick I have a similar job next Tuesday, I have a 14 inch iron to change and I wanna know if using masonry support on the upper part of the wall which is made of blocks mandatory?

[@SteveAndAlexBuild]

Never attempt without support 🧱👍🏽

[@wp869]

@@SteveAndAlexBuild Ok thank you, also I was told that I could use big nails in between the joint every brick to support while removing one brick at a time do you think that would be safe, thank you for your answer

[@SteveAndAlexBuild]

@@wp869 never heard of that method and wouldn’t recommend to either 🫣🧱👍🏽

[@wp869]

@@SteveAndAlexBuild thank you for all your answers I'm new in the business, last question, how spaced out do they have to be to support, since I have a 14'' iron angle to be changed how many of them would I need to be fully safe. Oh and If I don't have these, could I use another way to support the upper part of the wall temporarily

[@SteveAndAlexBuild]

@@wp869 . I wouldn’t recommend using anything other than props designed for the job . You can hire the equipment you need and they can advise you on it 🧱👍🏽

[@ChicagoLuis]

Had a lintel installed today on a previous installation of glass block window.. lintel is not flush with brick of my house. Was it installed incorrectly?

[@SteveAndAlexBuild]

Can’t comment on this without seeing it sorry 🧱👍🏽

[@richard21995]

Thanks for your video, very helpful to see how this is done, was the lintel an off the shelf item or was it purposely made ?

[@SteveAndAlexBuild]

Thanks Richard. It is a standard off the shelf lintel 🧱👍🏽

[@seamusfoster]

👍👍👍👌👌👌👌👌

[@SteveAndAlexBuild]

Sean 🧱👍🏼

[@Frenchwine15]

The way you approached the job was just how I would have done it however, like a lot of houses constructed in the day with LBC Tudors I noticed that the original brickwork was laid frog down which is never structurally sound. When you put the bricks back did you also lay them frog down, I hope not. It is very unusual to see a wood Bessemer on the in leaf of a cavity wall but made your job a whole lot easier as it was in very good condition.

[@SteveAndAlexBuild]

David Dore . Hi pal I went back and had a look at the video and the brick are actually frog up . We did put them back in frog up though , as for the timber lintel they were all in surprisingly good condition ! Thanks for watching and commenting 🧱👍🏼

[@markelleray2667]

I have a few rusted lintels just like these which need replacing on my house. I don't suppose you cover our area do you? Nr Rossendale Lancs. Many thanks.

[@SteveAndAlexBuild]

Hi mark thanks for asking but it’s a bit too far for us pal 🧱👍🏽

[@markelleray2667]

@@SteveAndAlexBuild that's a shame. It's been near impossible to find someone who will quote. They are big windows around 3.5m.

[@SteveAndAlexBuild]

@@markelleray2667 wow they are very big . You need custom made heavy duty angle irons for that Span . Approximately £300 each as they need to be galvanised 😳🧱👍🏽

[@karinaabad5347]

Even I enjoyed watching this! What does a home owner pay for a repair like this? And was this done because there was water / moisture around the windows? Wow thanks so much!

[@SteveAndAlexBuild]

There’s no set price as all jobs are different I’m afraid . Once the lintels starts to rust then it lifts the bricks up and starts to allow water into the wall which just speeds up the rust . Eventually the water will get inside the house . Thanks for watching 🧱👍🏽

[@karinaabad5347]

@@SteveAndAlexBuild thanks so much

[@SteveAndAlexBuild]

@@karinaabad5347 🧱👍🏽

[@joylee0215]

In the situation a 1930s house, there are no lintel inside, can I just repointing the brick on the top of the windows to make it stronger without install a lintel in?

[@SteveAndAlexBuild]

edlyn lee It’s not ideal but yes 🧱👍🏽

[@joylee0215]

Bricklaying With Steve and Alex how can I confirm if there is a lintel maybe a wooden one inside?

[@SteveAndAlexBuild]

@@joylee0215 knock some plaster off above the opening 🧱👍🏽

[@liamwallace2121]

Just a quick question if you could answer please , i have an opening of 2.6m so i have bought a 3m keystone lintel from berrys , there was a guy replaceing lintels on my neighbours property and he saw the lintels in my yard , he said that they are the wrong ones and that it should be a steel angle of 8mm thickness ? Is this true or is this old style building , because to me i believe that the design and length of the upstand at the back should be more than adeqate for the job but hes put doubt in my mind , could you advise please and great videos as always

[@liamwallace2121]

Its single skin aswell as the lintel for the inner wall is timber beam

[@SteveAndAlexBuild]

If the house has an angle iron outside and a timber lintel inside then an angle iron is sufficient. The 8 mm steel angle irons rust fast unless you get it f galvanised. If the keystone lintels weren’t up to the job that couldn’t sell them. As long as it’s propped when you build over it it will be fine . We how the all the time good luck 🧱👍🏽

[@liamwallace2121]

@@SteveAndAlexBuild so should i be good with the 3mm keystone which has a large upstand and a return at the top so its almost like u shaped

[@SteveAndAlexBuild]

@@liamwallace2121 . Yes pal 🧱👍🏽

[@liamwallace2121]

@@SteveAndAlexBuild brill :) thanks for the help

[@ioannisntokos6103]

Congratulations! Perfect work on brick wall. Please help me: How I can replace a wooden lintel (consisted by 3or parallel wooden beams) on a stone wall 70 cm wide, with one or two concrete lintels?

[@SteveAndAlexBuild]

Thanks. I’m sorry but I’ve never done that type of work before so can’t really help 😕🧱👍🏽

[@ioannisntokos6103]

@@SteveAndAlexBuild Never mind. Thank you for your fast response.

[@SteveAndAlexBuild]

@@ioannisntokos6103 . Sorry I couldn’t help , good luck with your project 🧱👍🏽

[@richardkirton7868]

I have a similar job coming up, full gable repointing and lintel / cavity tray replacement. I’ve seen you’ve done many, would you say a scaffold board is strong enough for the acro to sit on?

[@SteveAndAlexBuild]

richard kirton where would the board be ?

[@richardkirton7868]

Bricklaying With Steve and Alex on the first lift of the scaffold.

[@SteveAndAlexBuild]

richard kirton best not to . I have recently done a video about this exact problem. I will just check which one .

[@SteveAndAlexBuild]

How to prop an upstairs window .🧱👍🏽

[@ryanreda4760]

Where do you get your reinforced temporary supports. I have been using a c channel that needs to be anchored, but I like your technique.

[@SteveAndAlexBuild]

Ryan Reda Any to hire stocks them . They are called acrows 🧱👍🏽

[@knottstarr]

Great job. Out of curiosity (I am purchasing a house which needs this doing on 10 windows according to the surveyor) how much roughly per window? Many thanks.

[@SteveAndAlexBuild]

Hi Anthony, 10 windows! 😳. Your talking at least £300 for a small window plus if you have an upstairs then scaffold costs a few hundred pounds . Good luck 🧱👍🏽

[@knottstarr]

Thank you very much 👍

[@SteveAndAlexBuild]

@@knottstarr 🧱👍🏽

[@dhb572]

Just wondering what type of Lintels are used in new builds ? Good video Thank you.

[@SteveAndAlexBuild]

dhb 57 Hi pal , new lintels are the same as we have used here but they look a bit like upside down t ‘s . So they span the opening on the outside and inside skin . Back in the 60s and 70 s it was done with 2 separate ones , hope that makes sense . If you watch our extension video you will see us installing them on that job . Thanks for watching and thanks for the question,🧱👍🏼

[@markdwyer100]

How's it going lads just reading one of the comments there about packing slate surely it's ok to have one or two places whit slate what do you think

[@SteveAndAlexBuild]

Hi mark , I’ll only use slate if the brickwork has actually dropped and needs persuading back up a bit . Otherwise I prefer a tightly packed joint then acrows out straight away to let things settle and tighten up on the new mortar . There is a chance of bending these new flimsy lintels by packing slate in too tight . Each to their own though , that’s just our way 🧱👍🏼

[@scoyle1750]

The problem with slate in that situation is you are just pushing it through bed you are not pushing against anything so you are not packing it as there is a cavity unless you have a long bit and can push it side ways finger trowel the way forward drive it through joint and push sideways

[@SteveAndAlexBuild]

stephen coyle I’ll remember that one , cheers 🧱👍🏼

[@dannywilkins887]

Good patch and match boys! Losing much time due to weather now?

[@SteveAndAlexBuild]

danny wilkins . thanks pal , funny you should ask that . Today it was too cold to start first thing then it warmed up enough then rained in the afternoon! Last week was our first full week since mid October 😫

[@dannywilkins887]

Brickies always cop the worst of it🤦‍♂️

[@SteveAndAlexBuild]

danny wilkins 🥶🌨💨❄️☔️😳

[@daiburt1833]

Love it lads 👍tell me that wasn't timber behind the iron ? Nice to see you back

[@SteveAndAlexBuild]

David Burt . Hi David glad you like it , yes they are all timber lintels . They in cracking nick though 🧱👍🏽

[@mikep7146]

Great attention to detail fellas! as always! We have done loads of these in London - and we pack out the top beds just like that. I sometimes put shards of tile in there as well to stop any further sag - have you ever done that or do you think its overkill? Great videos.

[@SteveAndAlexBuild]

Mike P . I used to pack with slate a bit too much and bent an angle iron once. As long as that new bed is full I personally don’t think it’s necessary. I will use it occasionally if the odd brick has dropped slightly to pack it back up tight . Thanks for watching and commenting 🧱👍🏼

[@MrFilimn]

Why 17 dislikes here , this is the correct way to put a cavity tray and lintel .

[@SteveAndAlexBuild]

Cheers Philip 🧱👍🏼

[@itseclectic24]

What type of bit will drill through that and do you use that for indoor vaulted/ cathedral windows! Great vid

[@SteveAndAlexBuild]

Cheers , just a standard drill bit . As for the window you mention I've never done none of those .

[@escapetothequinta]

what mix is this?

[@SteveAndAlexBuild]

4 to 1 👌🏼🧱👍🏽

[@escapetothequinta]

@@SteveAndAlexBuild legend what type of sand? Sorry for all the questions but I'm literally doing the same thing hahha

[@johnr8289]

So what is the cost to replace lintel fora single garag door?

[@SteveAndAlexBuild]

sorry pal cant just guess a price , we need to see a job first 👍🏽🧱

[@llisntcoolj2375]

Typical window fitter bodge job putting angle iron in, if any support at all. Nice job fellas

[@SteveAndAlexBuild]

Cheers , there are so many like this 😬🧱👍🏽

[@llisntcoolj2375]

@@SteveAndAlexBuild I know I'm forever having to put L10s & weap trays in when replacing 1st generation upvc windows, that either have no lintel or a rusty old angle iron😬

[@SteveAndAlexBuild]

@@llisntcoolj2375 🏚😬🧱👍🏽

[@stockguy2860]

How much a job like this costs to complete? Thanks in advance.

[@SteveAndAlexBuild]

Around the £300 mark . Double if you need a big scaff 🧱👍🏽

[@stockguy2860]

@@SteveAndAlexBuild Do you cover West Midlands?

[@SteveAndAlexBuild]

@@stockguy2860 No sorry pal we are in Lancashire and only work local 🧱👍🏽

[@stockguy2860]

@@SteveAndAlexBuild Thank you very much for the reply. Found someone in West Midlands for the job. They told me to source the lintels. Do you know what’s the suitable lintel for solid walls? Both of the following windows are located on ground floor: Window 1: size approximately 290CM Window 2: size approximately 235CM

[@SteveAndAlexBuild]

@@stockguy2860 Beat advice I can give Is google them , Maybe Keystone lintels 🧱👍🏼

[@Bold_bezels]

How long did you finished one lintel?

[@SteveAndAlexBuild]

Awf Avila smaller ones just under a day the larger ones a good day. 🧱👍🏽

[@floweyable]

What ares do use cover

[@SteveAndAlexBuild]

mike101 We are in south west Lancashire 🧱👍🏽

[@scoyle1750]

You should get yourself a 8mm finger trowel and it will really pack out that bed joint slate or bits of brick is no good in that situation I find it works best when coming in from the header face of the brick as in toothings especially if the bricks have frogs but as usual all good stuff and like I said before we all have our own ways 👍

[@SteveAndAlexBuild]

stephen coyle .Totally agree , I’ve bought 1 of these finger trowels after a comment a while back but I keep forgetting it’s in the van 😫

[@scoyle1750]

Yip finger trowel drive it through joint and push sideways bit at a time solid joint.Have a good week get the thermals on 👍

[@SteveAndAlexBuild]

stephen coyle . Oh we have , we’ve been filing on site this week 🧱👍🏽

[@craighughescraig6096]

Maybe uses a toot pointer, instead off little pointer trowel.

[@SteveAndAlexBuild]

craighughes craig . I think you mean tuck pointer .😂. This was recorded in April and I’ve bought one since so I’ll be trying it out as soon as I can 🧱👍🏼 Thanks for watching and commenting

[@fredkoch4418]

I need a lintel replaced. Who can I call in Charleston,SC area?

[@SteveAndAlexBuild]

Fred Koch 😳😆🧱👍🏽

[@leighjakeman8765]

Hi, can I borrow this for my Bricklaying Apprentices please?

[@SteveAndAlexBuild]

Yes feel free 🧱👍🏽

[@leighjakeman8765]

@@SteveAndAlexBuild thank you

[@SteveAndAlexBuild]

@@leighjakeman8765 😁🧱👍🏽

[@chrisculhane8643]

What are those shore extender posts called?

[@SteveAndAlexBuild]

Chris Culhane Hi Chris the props are called acrows and they can be hired from any tool hire shop . The top extensions are called strong boys 👍🏼🧱

[@E69apeTheMatrix420]

DPC meant to be wider than the lintel to the next brick along. The left side of that was well short that will rot out again soon

[@SteveAndAlexBuild]

Maybe if the lintel was exposed and we used the same angle iron but it wasn’t and the angle iron is galvanised so it won’t rot out again soon 🧱👍🏽

[@E69apeTheMatrix420]

@@SteveAndAlexBuild 100mm past lintel is minimum regulation for DPC and weep holes at either side and every 450mm. You must know they are the regs and that was no good. DPC has to go past the lintel or water will seep underneath. Galvanised still rusts with standing water unfortunately the cold ice gets to it pretty good. We both know I'm rite. But your not bad at your job I just think that was a bad excuse and oversight not to put it past the lintel you know.

[@SteveAndAlexBuild]

@@E69apeTheMatrix420 . This was done before I knew about the regs .

[@snickpan]

how long did this take? :)

[@SteveAndAlexBuild]

1 Day 🧱👍🏽

[@vwtransportersandmotorcycl3729]

Why not cut the bricks out with a grinder and reuse

[@SteveAndAlexBuild]

We always re use the bricks 🧱👍🏽

[@TUDIU]

Where did you buy the lintel?

[@SteveAndAlexBuild]

D N . Afternoon , you can but them at pretty much any builders merchants . Even B&q and wicks sell a limited selection too 🧱👍🏽

[@Southpoint2019]

Tudor bricks

[@SteveAndAlexBuild]

Yep shite London’s 😡🧱👍🏽

[@dannypsimpson]

how much did this cost roughly ?

[@SteveAndAlexBuild]

DannySimpson . Can’t remember as it was a while ago . It wasn’t cheap though because of the scaffolding 🧱👍🏼

[@TheSilversurfer12345]

You have not got any bearing on the lintel and perp joints first

[@SteveAndAlexBuild]

Mark Hunt don’t get what you mean 🤔🧱👍🏽

[@mikeearls126]

That lintel looks really lightweight to carry that load...i was expecting something much thicker and heavier..that being said, i am not a mason !!

[@SteveAndAlexBuild]

Mike Earls That’s the standard off the shelf type now , as the saying goes they don’t make things like they used to. In this case it’s a good job they don’t 😳. Thanks for watching and commenting 🧱👍🏽

[@dennisphoenix1]

There isn't much load on it ,only the triangle of brick above it , no roof loading

[@pm-bg9mu]

Hard hats boys , good job otherwise ,

[@SteveAndAlexBuild]

👷🏽‍♂️🧱👍🏽

[@pm-bg9mu]

Love ur vids lads only saying hard hats , because I'm in the trade ✌🙂🙂🙂

[@SteveAndAlexBuild]

@@pm-bg9mu 😁. Glad you enjoy the channel , thanks for the support 🧱👍🏽

[@floweyable]

Areas

[@SteveAndAlexBuild]

?

[@Mike-pr8hx]

In general, how much does it cost a homeowner to have a single steel lintel replaced? This is happening to a couple of my home's lintels. I'm a little scared of the bill I'm going to receive. Thanks.

[@SteveAndAlexBuild]

Mike . Around the £3 -400 mark for straight forward ground floor one .Ascaffold bumps the price up quite a bit though .

[@Mike-pr8hx]

@@SteveAndAlexBuild Thank you for the information.

[@SteveAndAlexBuild]

Mike no probs 🧱🧱👍🏽

[@SteveAndAlexBuild]

Mike we are probably on the cheaper end for price as I am a sole trader so less overhead s than bigger companies 🧱👍🏽

[@СанкаСания]

Me WhatsApp yes

[@SteveAndAlexBuild]

Санка Сания Thanks for Watching but sorry no contact details 🧱👍🏼

[@PatHaskell]

Pointless.

[@SteveAndAlexBuild]

What is ?