Building a 1:211 ratio LT230Q for a Defender Td5 from a Discovery 1 or 2 Part 2

Be part of this channel! = britrest.com/s...
Shop 'till you drop = www.britrest.c...
www.gettr.com/...
utreon.com/c/b...
www.paypal.me/...
/ britrest
Your support is appreciated!
If you have a Defender/Tdi problem and do not know how to fix it, drop me a line!
Maybe I can help!?
[e-mail]
Send me a postcard for my wall!
Britannica Restorations Ltd
9 Ch. Rawson
Sherbrooke
Quebec
J1M2A3
Canada

[@cameronwood1994]

I did discover that the interlock is only fitted on Discovery 2's to the North American and Japanese markets. Quoting from the Workshop Manual, page 41-14: "An interlock solenoid is fitted for North America and Japan. The solenoid is located on the top of the transfer box main casing on vehicles up to 03 model year or on the selector lever assembly on vehicles from 03 model year. The solenoid is connected to the transfer box relay which, in turn, is controlled by the IDM. The purpose of the solenoid is to prevent neutral being selected on the transfer box when the ignition key is removed, thereby locking the box in either high or low ratio."

[@Defender110SLO]

Owsome I have done a couple of transfer boxes and I always put the uper gear last. Cbeers King Mike. 🥃

[@BritannicaRestorations]

Good stuff!

[@paulhancock3844]

It's a box with gears in it, its a gearbox! Reminds me of when I was an apprentice. I was asked what a gearbox was for, I said it's a device to provide a change in speed from the input shaft to the outputs shaft. They said no, its to keep the oil in!

[@BritannicaRestorations]

Lol!

[@paulhancock3844]

@@BritannicaRestorations of course unless it's a LR box in which case they struggle to do that, a LR box that doesn't leak needs topping up

[@husq2100]

Interestingly enough, I just sourced one of these interlock LT230s for a special project. These are not very common in Australia, and I’m using the safety lock out for something quite different than what LR had in mind 😁. I will be building it with Ashcroft ATB, MaxiDrive 30% low range , extended sump etc. I’ll be watching these vids a few times to refresh and get a different take on it. Thanks Mike 👍🍺

[@BritannicaRestorations]

Interesting!

[@axelboldt5101]

Thank you very much!!

[@BritannicaRestorations]

You're welcome!

[@angusabbott5615]

Another great video debunking the myth only “specialists” can work on an LT230 gearbox

[@BritannicaRestorations]

Great point!

[@thechod]

Mike those dismantling tools are so handy! Where do you get those from??🤣

[@BritannicaRestorations]

britrest.com/shop/

[@gregdyar6451]

Mike I'm always impressed with your variety of music. And on a completely different note, I have recently purchased a bmw f650gs, I call it the land-rover of bikes it's a 01, it comes without a fuel gauge just a empty warning light this is normal on these. so I was going to retro fit one any tips tricks or gauges that you know of to make my life easier.

[@BritannicaRestorations]

Sorry Greg - not a bike person

[@brianclayton3359]

About time you treated yourself to a new dust coat Mike!!!

[@edlebida8626]

I was going to say the same, falling apart at the seams - literally 🤣

[@gazzafloss]

Now that's a dust coat that works for a living, is it not...

[@ScorpioxA1]

I had to get a detend ball a spring and a grubscrew mine where mia i also had to replace both the hi low and difflock switches.

[@vincentpoole7588]

Mike. The biggest issue we've come across is those bloody prop-shafts front and rear have a dozen different combinations in Land Rover trucks ! Did you use the propeller shafts off a Defender or from a Discovery sir ? V.

[@srpacific]

You can just use whatever flange the vehicle calls for