BroncStar Gets Steering Overhaul Before King Of The Hammers!

Become a member to see videos before they are released:
/ @robbylayton
Join Robby and his crew in today's episode as they dive back into the Broncstar, taking on the crucial task of addressing the steering. With King Of The Hammers just around the corner, the team is determined to ensure the Broncstar is in top-notch condition for the upcoming off-road challenge.
Help support the channel buy Robby Layton T-Shirts, Hats, Patches, Stickers:
www.robbylayton.com
Subscribe: / robbylayton
No One Expected This With Ed's LJ20 Golden Nugget:
• No One Expected This W...
We Finished Ed’s LJ20 Golden Nugget!
• We Finished Ed’s LJ20 ...
Goodbye Golden Nugget... Hello '69 Dodge Charger!
• Goodbye Golden Nugget....
I Found A 100 Year Old Abandoned Tow Truck!
• I Found A 100 Year Old...
Joy Ride In Dad's Car Leaves Teen Buried To The Frame!
• Joy Ride In Dad's Car ...
Epic Barn Find Of A Lifetime, Waking Up An American Classic!
• Epic Barn Find Of A Li...
Abandoned '69 Charger... Will It Drive 1,115 Miles?
• Abandoned '69 Charger....
IT's ALIVE! The Abandon 69' Charger Runs Again
• IT's ALIVE! The Abando...
We Cut The Roof Off Matt’s Off Road Recovery Jeep
• THE BANANA GETS PEELED...
1 Frozen Skid Loader & 2 Trucks With Matt's Off Road Recovery + Trail Mater
• WE ALMOST GAVE UP! 1 F...
Shop Tour Video:
• Shop Tour & Meet The C...
Please like, subscribe, and share!
Thanks for watching, Daddy loves you.
#RobbyLayton #AutoBody #Repair
ARMOR SHIELD IX DIY CERAMIC COATING KIT + FREE 16OZ ARMOR SHIELD LITE: avl.kg/robbyas9lite

[@grantnames8152]

I remember how appreciative and emotional Hillbilly got when you guys first built the Broncstar. I’m super glad to see it getting more love. It’s a cool build.

[@CynSan]

Your brother is killing it with the editing!

[@mythreeandonehalfvans]

Thank you Hillbilly for showing the wheel alignment tool you guys have. Now I can make one to sort my front wheel aliment out. For 40 years I just asked someone to hold the other end of the tape measure and now I can do it myself.

[@j.j.clingman4083]

Hillbilly you definitely crack me up bud!! The good old hand slap to the fist hand splat!! Ouch Robby says!!! Lol!! That definitely couldn’t have been better!!!

[@fluffpantss]

We call that move "turkey" fist is the body and open palm is the tail feathers

[@skyepilotte11]

Nice fab work...Hillbilly is appreciative of all that's been done on Broncstar...Colton is an up and coming star...

[@brettcooper9748]

Not my business, but I was watching Rory working on your wrecker. You might consider stretching your cab a little before he finishes mounting it. Good luck on it. It is going to be awesome!!!

[@patvirgin8822]

Hector from @howlingwolf is at the shop today, 2/5/24

[@bryanmcdermott4204]

I feel strangely accomplished watching these projects near completion. Nice work gentlemen. I love the BroncStar and Whiskers. Resuscitating older stuff is one of the things that makes this channel terrific.

[@tiredagain6722]

Mr. Lincoln sure is a hoot!

[@jerryscott253]

Man I love the way you take care of your employees and most of all your family may God bless you in many ways

[@MarkoMygun]

Awesome job guy's, The Broncstar is gonna do great at KOH. You guy's have put alot of work into it and it shows. I know Hillbilly is very grateful for all the work you have put into it Robby. Thanks for the video guy's and can't wait to see you at KOH , I hope you guy's do some great video from there.

[@hunclex7495]

Ooh. Don't let the Lincoln play with the air handle unsupervised. The air pressure can really do some damage in the boys nose, ear or eye. Looks like Colton is paying close attension to what Robby does. He is absorbing skills and is a very good addition to the crew.

[@steven.h0629]

noise as well.. the iPhones and Watches all have decibel measuring apps that show danger levels, you'd be surprised 👍😎✊

[@chrissalsgiver-bx8od]

Robbie, It is easier,quicker and less mess if you use a roller to apply bedliner to Wiskers.

[@zyeborm]

The damage to his heart would be immeasurable though

[@thelonewrangler1008]

Pro tip! After you get those threaded steering lines properly cut to length and fully tested for clearance and function, you should then get a crimped set made up because those threaded lines can separate sometimes, and if you swap them out before they fail you have a spare set to get you off the trail.

[@bucknaked9095]

Used that type of fitting for years in the injection machine industry. Hoses/fitting would be rated for 5,000 psi pressure. Never had a fitting separate.

[@thelonewrangler1008]

@bucknaked9095 does the injection machine industry regularly tug on the hoses with logs and rocks? I'm not saying they're terrible or useless, just not the best option for reliable offroad operation

[@neilfromclearwaterfl81]

@@thelonewrangler1008 Usually in a production environment one days operation will put a hose into several months to the equivalent of a years stresses on a vehicle. Arms/cylinders are not always stationary in fixed action and have to articulate sometimes more tightly than when used on a vehicle plus will most often be working though their full range of operation at higher speeds to maintain production rates. The stresses on the return stroke can also be many times greater as we will use a higher flow rate there then on the feed to greatly increase the number of cycles per hour. At those rates then heat can also be a greater issue requiring a more robust cooling system then on a vehicle plus the machines often need to hold up to working 2 or 3 shifts a day 7 days a week with limited down time. Now if we were talking about brake fittings where you lightly insert a hose and expect fluid or air pressure to keep things clamped together in high stress situations then we'd have a problem. Best!

[@TowMan127]

You guys are doing a killer job on the BroncStar

[@bigospig]

Colton is a great addition to a super team!

[@OsoGrande5150AZ]

Excellent job guys! I really miss the Broncstar, and hope well see a lot more of it in the future.

[@saintracheljarodm.holy-kay2560]

Have a good week and count your blessings amen.

[@jacobycampbell5564]

BRONCSTAR is going to be awesome!! Thanks for sharing guys, love the show!

[@BarnyardEngineering]

Do Whsikers's roof with a roller.

[@jdrags10]

The thread on hydraulic ends are just as good as press on ends..plus can be clocked and trail repaired..

[@SlightlyLessFat]

The key to a proper and solid high five is to look at each others elbows. You will never miss and you'll get a slap-tastic sound!

[@joshshelton796]

Awesome video guys! I'm really happy for Hillbilly! Him and Robbie are great together!!

[@TxRiderDave]

Broncstar is gonna be one heckuva wheelin’ beast.

[@jberg8159]

25:15 When you high five a fist bump it’s called a turkey. 🦃

[@jimmymyers9245]

"Lets do nothing " love that plan robbie hahahaha I know how the small things can overwhelm ive been painting houses for 15 years I know the feeling all to well! One task at a time !

[@jamesbigham9036]

I am glad to see the BroncStar is back on the road I think Hillbilly is happy to have the BroncStar back up and running

[@tiredagain6722]

Don't yell me, you're Rob "The builder" now 😂

[@garychaiken808]

Great job guys. Thank you 😊

[@xxBlazinBobxx]

That windshield on the BroncT..err BrocStar is killing my OCD! Lol. 32:58 That Blue Monster thread tape is great!

[@user-gu2xz9vk1z]

When you're building hoses with screw in fittings, put STP on the threads and the ID of the hose. This will keep them from cutting the rubber of the hose ID. If you don't you could end up with a flapper in the hose.

[@LawlessOffroadAdventures]

Rock on! Happy to see the bronkstar getting some well-deserved updates, cant wait to see it dominant KOH

[@michaelburns9172]

Some of my fondest memories with my Son is at work. Enjoy Daddy.

[@jessy81520]

Lincoln was just a little baby when I started watching he's growing so fast.

[@rmsatt1608]

Have fun at KOH.

[@carson7937]

A Coyote with a Whipple might be in order for the Broncstar

[@rickwoods5384]

Put a swivel fitting on one end of the hydraulic line. No clocking needed!

[@marklar7551]

I will recommend that you get some poles and just use them to tent special projects. The have tube frame tents that you can just overlay your plastic (save the top that comes with for your events since you are in the sunny west). That can make a booth to keep stuff clean, and they go up and break down quickly.

[@KRAVER_]

Lincoln the air blowing trained professional. 🤣🤣

[@davebaker489]

I'm certain you could have built (frame and all) a rock mo-billy from scratch but whatever. Re the sno cat Have you considered R V roof coating ? It's rubberized and you roll it on. Just a thought.

[@jasonscharf97tj]

I can't wait to see it in action good job guys!

[@Bigdaddyslasher]

BroncTurd LOL

[@joeloyd56]

Thanks for the content

[@914Rocky]

You guys are so hard working. It’s impressive.

[@donras564]

Look forward to your videos, some reason they make me feel 😊. Love your crew and the little (professional) one! Thanks again , good stuff!

[@thereplacementfordisplacement]

I had a fiberglass roofed tent trailer that the roof got hit hard by a roll out awning that a random gust of wind flipped onto the top hard. I had bedliner material professionally sprayed on top and it worked beautifully to seal it and make it strong again.

[@rhondasweeney7271]

Awesome video! Thank you for sharing! 👍

[@jimgould2829]

Its really incredible how much custom fab work you are building into the BroncStar💪🤠 Im seriously impressed 🫡Im anxiously waiting to see what she'll do on the trails!!

[@ChipW]

Now it needs a boom with a couple of winches in the rear and some rear steering. Call BroncStar, the world's smallest offroad wrecker!

[@ischmidt]

Rear steer on BroncStar would be pretty killer.

[@danafaulhaber334]

Yea rear steer would be an excellent addition to the broncstar regardless if they add the boom but they should least add a winch or possibly a hitch mounted winch they can take off/on as needed..

[@scottclarke5571]

Never got the notification but knew you posted so i found your video

[@samspade7360]

OMG! That front end framework is such a work of art! Sometimes overkill is so magnificent. Is there any way not cover it up with shell. I mean seriously, is there a way to display it?😃❤👍

[@davidbingham7404]

Robby, Hillbilly & crew great video. Good luck at the "Hammer". David ,Utah. ♥♥♥.

[@DennisMcGrew]

always have a great time watching your videos

[@finchadaptivefabrication4689]

Parker Hyd makes what is called a Mini Crimp it is great for shop use and some Hyd shops will even loan them to you as long as you buy hose and fitting from them.

[@jdbrown3695]

Nice job on the steering guys! Can't wait to see it on the road.l Or in the dirt!

[@zinmaker2522]

The G in gcode stands for geometry. So it is short for Geometrycode i suppose. Which makes sense cause the gcode is mostly the path the cnc tool moves if you look at it in a text reader.

[@tavolo22]

14:35 Hey, now! Surprised you left that in.

[@johnkelly502]

You should have used mobile home sealer. The white buckets are a form of rubber. We have enclosed car trailers that I seal the roof with and I never like I have had leaks before I put the sale on. It’s great stuff you can pick it up at Lowe’s.

[@YouTubeBinging]

Gonna be good to see the 🌟 back to life

[@user-wd8mn8sf1j]

You guys should make a Robby Layton video game with shop gremlins and trail trolls that break stuff you have to fix

[@emilevoyer123]

THANKS FOR THE VIDEO

[@supperwelder]

I have to say so far this is the coolest build that is not a customers 👏👏🙀😹😹

[@johnkranz4004]

Nice work Guys

[@MikeTruchon]

Robby if you spray brake cleaner in the hose the fitting will go on easer & brake cleaner will dry off works try it

[@boolongfellow8452]

Will there be a bronc star vs death star Ford vs Chevy showdown at the off road games ?

[@iheartdiscgolf]

Wow Robbie knows spanish too. Muchos Betteros 🤣🤣

[@yumafrank563]

Did you say TACOS, lol

[@beachlife9419]

Nice work guys 👍

[@Rocwlkr]

You should make a shirt with BrocStar and BrocTurd with the brochurd X out

[@BendingBallistics]

The g in g-code stands for geometry in the beginning when it was created it was called rs-274

[@reddog543211]

Good job guys

[@1944chevytruck]

good job boys

[@TheOldaz1]

Nice job guys.

[@jerryscott253]

Soon as I'm able I'm get me a hat the past August had a heart attack just now went back to work a week ago but while I was out of work I found your KZbin channel and I love it between your channel and Matt off road and fab rats that only channels I watch you all rock ❤but you need to paint the snow cat sliver and blue that would rock

[@RobbyLayton]

Send me your name and address [e-mail]

[@DangNguyen-my3wd]

31:35 deserves a “That’s what she said.”

[@brianr.9991]

The old geometry on the 4 link😂

[@Jake-yx7ct]

I missed the video when you created the front chassis for the BroncStar. Looks great-niece and Nascar style.

[@danhunkele1505]

Putting 90° fittings in the cylinder and straight fittings on the hose would eliminate the need to clock the hoses. The hoses would sit closer to the cylinder too.

[@andygrant5275]

Does Colton not do any welding at the moment.? The way you guys can fabricate things is pretty impressive.

[@mickeydevey834]

Nice addition to the Broncstar!

[@timoldenburg2249]

My wife says “Hillbilly got a haircut!!” 😂

[@kennethbrown8723]

The BroncStar coming along!

[@suzannebert3652]

Lol it's going to be raining this weekend. Mud puddles 🎉🎉🎉

[@foxp2483]

20:46 Oh my God get a portaband.

[@mikemccallon6957]

Should make all the lower hoses the same and have one made for spare and it will work for either one when you blow one.

[@tobiastho9639]

I want to see a secret surprise build for Colton and Cody... 🤗

[@Nickwillfixit]

Looking good as any job not done before you do not always get it right first time, practice makes perfect. Talking about getting it right thhat radiator needs to be mounted level yes I heard you are going to move it but it gets hot at KOH and it may cause flow issues.

[@UncleManuel]

God dang, the editor did work in overdrive on this episode! 😂😁🤟

[@mikeass242]

26:39 lock tight brother

[@cookchris9311]

What new promo code you have for merchandise I'm Canadian up 200$ just curious

[@ge3186]

00:22 that should be a shirt

[@maximeberube7490]

You can turn a crimped hose end with visegrips

[@red6461]

Don't hurry Robby ! Take all the time you need! lol

[@robertsmith7580]

Awesome video

[@thomasrossi31]

Fast forward for the win.

[@matthewjones7935]

It's called g code because the are g codes i.e. g01 g02 etc. that command the machine to perform various operations such as hole interpolation or other things to cut out the part. Same for all types of cnc machines. There are also m codes that command machine functions like spindle rotation /stop etc. on mills and lathes.

[@JThelen1031]

G-Code in machining is Geometry-Code. Yanno, because it's for cutting out shapes.

[@kensilver9646]

If you need to remove the winch, will you have room with the inter cooler welded directly above it?

[@marketmalc]

Mount the cooler upside down so the brackets are higher but the cooler would be lower.

[@davestevens4263]

I'll look for you guys , I've been to koh a few times this week, I live close .

[@Smackvttv]

You could mount the oil cooler vertically

[@jimmymyers9245]

Hillbilly gonna be so pissed about you cutting that light out he deserves 1 free pass !