brother LC38 LC67 LC61 LC65 LC980 LC990 LC1100 Recycle Catridge Refill MIPOHK 提供

www.mipohk.info 產品展示Mipo / Magic Colour Ink墨水均採用美國進口 專用墨水，專業品質保証ISO9001 Certified，雅虎拍賣 hk.user.auction... 如購買請進入 hk.user.auction... 所有Mipo / Magic Colour Ink進口專用墨水， 均有提供 Canon / HP / Epson / Brother / Samsung / Lexmark各品牌獨特配方，各品牌專用墨水均有提供 30ml / 100ml / 200ml / 500ml / 1000ml不同 容量特定選購。 MIPOHK 提供超低打印成本, 每頁A4低至US$0.0007 (以Mipo 200ml 原樽裝墨水售價US$6.-計算)。

[@KazKylheku]

@seyfi84 You do not have to develop a vacuum. These cartridges work even if you drill a hole in them (which is what we want to avoid!!!) A vacuum will develop if you suck old ink with the syringe. Just press the pressure relief valve pin to let air in. While filling, press the pin to relieve the air pressure building at the top. You must hold the cartridge upright, so the air bubble is where the pressure relief valve is, otherwise the valve will spray out ink when you push the pin!

[@KazKylheku]

YOu rock man! I just figured out how to do this myself. Just inject very slowly through the outlet hole, and push the pin to relieve pressure. Hold it upright and watch the little window for the level so you do not overfill (because then the ink will squirt out through the pressure valve!) Good idea with the rubber band, man.

[@drguruprathap]

simple and easy, the best method to refill

[@balyquiel8310]

me gustaria saber si esta es la manera mas fácil de rellenar el cartucho, y si se le pone algun conector especial a la punta de la inyeccion... y tambien me gustaria saber si no es necesario sacarle todos los esprines al cartucho.....

[@KazKylheku]

@arcassens There is no connector! The cartridge has a rubber receptacle built in for this. To enable the ink to flow, you must press the pin on the opposite receptacle at the top of the cartridge. This is why he uses a rubber band: to depress the sliding sleeve to get better access to the pin. You don't have to push the pin all the time, just jiggle it every few seconds while filling to relieve the pressure. (Or while drawing out old ink, if you wish, to relieve vacuum.)

[@vivi519]

PLEASE REPLY!! is this the same procedure for LC51 too????

[@gamezilla1129]

thank you ♥

[@ongchorcool]

My local Refill shop said it is impossible to refill lc38 ink!

[@cheeyc]

lc38 cartilage brother printer can replace with lc67 or lc39 or any model?lc 38 volume is small...

[@linzaray]

Where can I get the connector for the syringe to insert into the ink inlet? thank you

[@camelyscam7872]

fethi Bouadjaj My one worked with no connector, just the seringe

[@mipohk]

@ongchorcool may be your local refill shop don't hv the technical skills yet, at our side, it's easy skills and our video hv shown you.

[@balyquiel8310]

como se consigue la parte 1que se le pone a la inyeccion adelante...la puntita

[@moss8448]

if only I could find the air hole for the model LC3011 cartridge....grrr

[@JnQc13]

Why did I ended up here after a bong hit video?

[@mipohk]

LC39 Can Refill

[@mipohk]

ok work

[@ongchorcool]

@mipohk now i know it!

[@BeybladeMetalFusionD]

ley gurre goo goo hann

[@mipohk]

@cheeyc Yes

[@asiangirl993]

Love ya! It fucking worked =D

[@eduardopato11]

english please I don't understand chine

[@oiseaudenuit]

me neither but i see what he does and it works!