How To Refill Brother Printer Cartridges | Refilling Same Cartridges Again and Again | Part-2

[@jasonbowne6557]

Great video - very helpful. I had a printer that had been sitting for a long time and was not printing. I used this method to drain existing cartridges, add 8 part windex/2 part alcohol to fill the old catridges and did many cleaning cycles until they were clear, then replaced with new ink catridges. Now with this method I will go buy some ink and not have to buy new catridges for a long time. thanks!

[@atultilkaan]

Yess. I am sure it will work 👌👌

[@dlagrua]

The man is a genius to figure this out. All it takes is a few cents of ink to get a $30 cartridge going again but I believe that a reset procedure may also be required

[@anilphilip546]

looking at other people's videos, someone posted that you do not need a resetter - simply cover the transparent window with black tape. This will fool the printer into thinking it is full

[@atultilkaan]

Thank you. Means a lot❤️🙏

[@tracyniedermeyer2727]

Thank you!! I hate the thought of those wasteful plastics in landfill.

[@rsauve999]

Thanks, Atul. Very helpful. I've refilled another, messy, way for the J497DW; now I'll try what you have done.

[@siddiquechopdat1744]

Hi Atul thanks for the video really helpful. I have Brother MFC-J4340DW ink LC426, I have refilled the cartridges using your method but the printer shows the cartridges as empty. Do you know if I need to reset the chip? If so, how do I reset it please?

[@newellbarrett5537]

Atul is missing in action on this important question

[@flyiniowa6255]

LC401 brother printer cartridge owners. The hack is to change the date on the initial setup screen to 2021 year. Then power off the machine and remove ALL the ink cartridges and refill as needed with a needle and syringe as seen on KZbin. Then power back up and install the same cartridges when asked. It will then show them all as full.

[@kazuhakaedehara8237]

where do I make the hole

[@flyiniowa6255]

@@kazuhakaedehara8237 On the top of cartridge where it is clear. There is a black swinging arm inside to show ink level. Take a hot needle and push through. Add ink with a needle. Cover hole with hot glue

[@kazuhakaedehara8237]

thank you. i will try when my ink refill kit arrives

[@newellbarrett5537]

But my printer (MFC J1050DW) keeps flashing ink cartridge is empty, I cant access settings at all

[@ziaulhoque3002]

Thank you brother, I have tried it today, just awesome

[@martingolding4951]

I've been filling my own cartridges since 2006 Epson and brother printers bought refillable cartridges for Epson £16 for 6 bottles of ink, which lasted me 3 to 4 yrs just think of the money I saved from buying new cartridges

[@annknows802]

Wish I would have found this sooner before I made a mess of my sink. Thank you!

[@atultilkaan]

😀 That happens sometimes😀 I am glad this video helped you out🙏

[@ManishaJhalaan]

This one was much needed 👍In the beginning is looks tough but later It does looks easy after you explained it 😀

[@atultilkaan]

Thank you😀🙏

[@georgevanvalkenburg2560]

ATULL; GREAT VID, THANKS FOR THE INFO

[@adeeep]

Thanks for the vedio ..but can I do it with mfc j1215w

[@willhatfield493]

Wow thanks man great video!!! Btw you don’t need captions on, I can understand everything you are saying homie. Again thanks man great video!

[@atultilkaan]

Hey!! Thank you. I am glad you found it useful. I will keep that in mind. In future videos I will not put cautions. Thank you🙏😊

[@ivonnemontes01]

The captions help those who English is not their first language

[@williamshambrook8400]

Can I refill the cartridges used in the Brother J1010DW ?

[@jmm1174]

How do you clean the syringe to switch color inks, or do you have a syringe for each color? Do you have to clean the syringe when you finish refilling? How do you do it? Thanks for sharing

[@atultilkaan]

I simply keep water bowl and then clean it 2-3 times befor switching to next color

[@Seansyy62]

does this work for lc-3033

[@vlad9086]

Thanks for the video! Do I need to clean-wash a syringe after each color? And how can I reset a chip on a cartridge? MFC-J1205W

[@atultilkaan]

I normally wash it. Then other colors don't mix up.

[@NaLovePHAT4Life]

I need to reset my chip for Brother lc401 ink cartridges, do you know how to do that?

[@Maconviking]

Great video

[@kskvinessingh9173]

Nice video 👍

[@amandagonchakov2811]

Can you refill a BROTHER MFCJ4335DW cartridges

[@msgmastersky5021]

Thank you bro, very helpful video , great job

[@atultilkaan]

Thank you😊🙏

[@SagorHussain-pz7cw]

But will these non branded ink give same number of prints as the original ink?

[@blissful14peace]

I have a Brother MFC-J1205W. I bought it because it was affordable but the ink is way too expensive. Do you have a video showing how to add ink to the LC404 cartridges? Also, do the cartridges you have been replacing ink on have a chip? Thank you.

[@atultilkaan]

Hi, I don't have LC404 cartridge. But One thing I know is that if you know how to open the cartridge or make whole and close it like I did in my video. All the cartridges can be refilled and reused. You may try. Its not that hard.

[@blissful14peace]

@@atultilkaan Thank you! Have you had any issues with resetting the chip or do you not have chips on your cartridges?

[@jonklopez]

Any update on the chip resetting ? I’m going to try it soon

[@blissful14peace]

I have chips but there is not a chip resetter for these cartridges as far as I know. For now I purchased new ones hoping a reset device will come out for the chips.

[@amandabland9202]

I wonder if refilling before ink is out will help with the chip issue

[@dreaminglife2139]

Do you need a chip resseter?

[@YOBSTATV]

good idea bro...thank you.

[@cgmtcgmt]

Thank you

[@horiatran8159]

Did it an only the blue one worked, the other ones apear empty, how do I fix it? There is ink in them but onlt the blue one is detected by the printer

[@tashanganne9636]

Hello my printer is Mfc-j491dw Lc3311 and Lc3313, what kind of ink I'll use to refill ? Thank u

[@atultilkaan]

You can use any third party ink. Although BROTHER says to use only their ink but it doesn't matter. All the inks work fine.

[@anilphilip546]

@Atul Tilkaan Is it possible to drill the hole at the back of the cartridge? That way we do not have to open the cartridge but can simply refill it without taking it apart. Please comment.

[@atultilkaan]

Hey Anil, Thank you for watching the video. In regards to your question, I cannot guarantee what I haven't tried myself. So if you wanna take chance, you can. But I think it is much better to do the hole on the soft white plastic inside, rather than the black one outside. Taking cartridge apart isn't that hard. You just need one screw, that's it.

[@anilphilip546]

@@atultilkaan I tried taking it apart - will try again. Also looking at other people's videos, someone posted that you do not need a resetter - simply cover the transparent window with black tape. This will fool the printer into thinking it is full

[@ruthmarcelo2949]

Please make a video brother ink lc3033 for mfc-j995dw

[@Earthvsmoon]

hey bro. can i use the same method in LC3617 cartridge ? my printer is brother MFC J2330dw. thank you

[@atultilkaan]

You can use with almost all models.

[@Earthvsmoon]

@@atultilkaan thank you Gobless

[@kazuhakaedehara8237]

works with Lc401 cartridge?

[@faithfreedom4084]

Can it work on J995DW?

[@kyriakosdrivas1942]

I refil find my but then it shows no ink on and stop working. Can you reset the chip?

[@warriormamma8098]

I am looking how to refill Inkvestment Tank cartridges by Brother.

[@ziaulhoque3002]

Do we need chip to reset?

[@elsakuan8411]

how about regular glue or crazy glue?

[@atultilkaan]

Any glue is fine as long as it is stoping ink to leak and you can take it out next time easily.

[@estrelagat972]

Can i use tape to cover the hole?

[@atultilkaan]

If you use tape, not sure if will last long or not. Best is glue.

[@habib_on_the_way]

Hi, brother, I'm from Bangladesh. Can i do the same process for my Brother MFC J3530 DW printer as you have shown in this video? Those cartridges have a chip on the top. Please research it and tell me. Pls pls pls

[@atultilkaan]

HI. I checked the cartridges of MFC J3530 DW. Yes there is chip on top, but you don't need to make hole there. You can make Hole anywhere, from you can put the ink in. Once ink is put, then close it. It will definitely work. I would at the side on top. I am sure, it will work

[@habib_on_the_way]

@@atultilkaan Thank you, i will try.

[@kingdomthingstnt]

@@habib_on_the_way did it work

[@timbacchus]

Brother has not had any LC 406 ink cartridges since the beginning of the year. It is now June 2023.

[@pombom1]

Hi can I refill ori brother ink bottle??

[@atultilkaan]

What is Ori? Did you mean Original Brother Ink? If yes, thenobviously you can refill original ink. Why not?

[@sousamartins5982]

Why you have to make new hole on the cartridge if already have two holes?!

[@atultilkaan]

Yes I get that but that is messy procedure to refill ink. I found this way better. Please choose what is right and suitable for you.

[@j.t5841]

Thank you soooo much

[@atultilkaan]

You are welcome🙏

[@dinbandhumandavi8221]

How to reset chip

[@AnnLippert1]

Jeezus you need to be MacGyver of ink ?! Do i really want to do this?? Hmmmm

[@atultilkaan]

😂😂

[@bernoberno8777]

and wat about the chip ?

[@onesix939]

Need to reset the chip?

[@haritasanagala]

Vu

[@DavidRice111]

Lose the music! Combined with your accent, hard to understand you.

[@atultilkaan]

Apologize for that. I will keep that in mind. Thank you🙏❤

[@eYeZiQ]

I thought he was very easy to understand. Perhaps buy some proper headphones or watch some international television once in a while so accents don't confuse you so heavily.

[@djvic2531]

Thanks