2 Stroke Diesel, Over 2,000HP, Home Built Monster!

[@crkproductions5000]

That boy snatching gears like there is no tomorrow. That’s amazing

[@3tone379]

Hahaha yup how you drive them Ole 2 strokes gotta slam your hand in the door before you drive (so you're pissed off at it)

[@kcdesignconcepts5216]

Lol ... So true.

[@JimmyChambers-sc9oc]

The throttle response on a two-stroke is way quicker than your than grandads Cummins or claterpiller. No better diesel that I know of. There are still a bunch out there making music.

[@JaguarXJRman]

Used to work on the 6L71 engines on the old Flxible transit buses and 4L71 as found in the Coast Guard’s motor surfboat when I was active duty Coast Guard.

[@tarzanc6326]

Ese camión es una pasada 😍👍

[@danw1955]

I've been following Wayne (Ol' 2Stroker) for several years now, and I watched all the build videos when he and Jason were first getting the common rail set up and working correctly. It's amazing how quick he can shift that modded 13 speed!😲 It sounds like a first gen Honda 750-4 when it's up on the pipe!🤣 Curious to see what he does with the 12V-71 when he gets it stuffed in there!

[@jlo13800]

8v92

[@jlo13800]

How many PSI of turbo boost does this 8v92 2 stroke need???

[@danw1955]

@@jlo13800 Now that, you would have to ask Jason, or Wayne (Ol' 2stroker). From what I've gathered, it uses a 'by-pass' type system that actually goes around the supercharger, so it doesn't blow the supercharger apart once it's reached maximum displacement.

[@TheTyisawesome]

What a wild build! Dude even figured out the ECU mating himself! What a legend!!

[@TheCrustyFatCab]

I had alot of help from Baldur on the ECU setup. I won't even pretend to know how all of that works. I'll take 25% of the credit for this thing actually running.

[@sarah-janelowrie2571]

Wayne is great. One of my favourite KZbinrs. Straight up truck loving man. No gimmicks, just trucks.

[@JohnDiMartino]

Amazing taking an engine that dates back to 1938and making it competitive today thanks to an entire new modern fuel system 👍☝️👌. What a bad ass truck!

[@BjarneLinetsky]

Four bolt mains are standard on diesels and the blocks are built for 18:1 compression

[@jlo13800]

@@BjarneLinetsky i got a silver 8v92 2 stroke not sure if its the same block as this

[@davebrown8414]

That guy that built that is a genius. That has some serious technology in that sleeper truck. That is cool.

[@regretabletangibility]

Apparently, it was him & someone called "Jason".

[@mrstyle_67]

That’s one hell of a truck and motor Jason had in that truck. Unbelievable job on all the custom mechanical work he did.

[@barryphillips7327]

Look up the ''Bandag Bullet, two Detroit V8 joined together with Nos 3000hp SMOKES the Rear tires like you would Not Believe!!

[@mrstyle_67]

@@barryphillips7327 you weren’t even the slightest exaggerating. That’s like back 40 years ago when I was a teen Art Arfons built the most amazing multi engine tracker pulling machine.

[@bamortimer]

Perfect amount of shine and rust. That Ol GMC is so cool

[@Kaegis]

Awesome to see that there's still smart people out there pushing the limits of their dreams & imagination. 💪

[@fexploder3281]

That's one of the coolest 2-stroke Detroit projects I've ever seen!

[@JimmyChambers-sc9oc]

Look up General Lee truck pull. That 8v-71 is insane.

[@fexploder3281]

@@JimmyChambers-sc9oc I saw it and it most definitely is insane.

[@kevenhiemie]

Jason Douglas has an awesome shop just south of STL and down the Street from me that does amazing work with Volkswagen vans and I love hear that truck rolling down the street.

[@allexro1381]

I will get this to put in a museum and look at it for hours..this is a hell of a masterpiece from engine to everything..what a cool truck here

[@kennethcarlton2860]

First diesel I drove had a Detroit Diesel 6v53 for a farmer and the last one is a 3406 Cat built B4 emissions were thought of . I loved that truck and floating the gears

[@slocavky]

God I love a Detroit two stroke. Music to my ears...

[@ronfullerton3162]

So hard to find one still running around in the wild anymore. But once in awhile, my ears perk up, and my mind sez, "Oh yeah!"

[@frankiehughes7423]

I was standing there when you took those videos of him revving it. Came over and looked at your rigs too. Sucks they canceled the sled pull I wanted to see what those tracks could do.

[@douglasmayherjr.5733]

Thanks for taking the time to check out such an awesome old truck. Jason Douglas has made something really cool with the Crusty Fat Cab. I follow him and Wayne at Ol2Stroker, I have met both guys numerous times and they are both great guys. Jason is like a mad scientist, I can’t wait to see the V12 version. Looking forward to seeing you and Brutus at Onaway in May 24. Thanks Again, Bruce.

[@kevinlewis9151]

Great classic. That's the picture in the dictionary if you look up Beast Mode there's that truck right there

[@P-J-W-777]

It’s awesome I was about to post how cool it would be if someone built up an old school twin supercharged twin turbo charged Detroit 12V71TTA V-12. I’ve always loved the the sound of those old 2 stroke Detroit V8’s and V12’s. So unique, and you knew them when you heard them back in the day.

[@ruxoneto6560]

Detroit made them v-12-71tta , with bypass blowers & intercooler

[@P-J-W-777]

@@ruxoneto6560 we also had a lot of equipment in my family’s company with the Detroit 12V92 and 16V92. They were always my absolute favorite sounding with straight pipes.

[@duramaxdiesel8]

I rode in this truck prior to the common rail set up, it was fast then already!

[@dannyv2335]

Wayne from the Ol2stroker channel is the man.

[@johno6963]

I agree, it even gets better when he's hanging around with bacon

[@jlo13800]

8v92 2 stroke running castor 927 maxima 2 stroke oil feeding tge bottom end and running e-85

[@charlesangell_bulmtl]

@@johno6963

[@dante9162]

That truck so amazing and the sound 14:27

[@ChevyGuyZZ572]

Adapt this tech to a 16v149 and you are unstoppable. It makes 1,060 hp stock. You could get 6k easily with the electronic common rail and bigger turbos. Also, if you haven't already, extend the intake ports up so that way you can get boost into the cylinder after the exhaust valves close.

[@hamiltonhoover792]

hell yeah its cool to see you share old2stroker! he is one of my fav youtubers!

[@onefastslimjim]

Same here! Love that guy!

[@mopar_man74]

Bring on the subscribers, wanye deserves all the subs

[@banditgrizzy1955]

Be really cool, if they still exist, if you showed these youngins the start up of an old air start. Coolest sound you will never forget. 👌😉👍💯

[@goosenotmaverick1156]

Oh man air starters are great!

[@TheAttacker732]

Air starter motors are still made and sold. They absolutely still exist.

[@JaguarXJRman]

We had air starters for the 2cycle inline 12 opposed piston Fairbanks-Morse diesels and the GM V8 service generators onboard Coast Guard Cutter Hamilton WHEC715, and for the V18 ALCO 4cycle diesels onboard Coast Guard Cutter Spencer WMEC905. And we had air starters on the 6L72 Detroits in the Flexible transit buses for Broward County Transit in Ft Lauderdale, Florida.

[@JaguarXJRman]

Just remember, you still need adequate 24vdc and 12vdc to power up the ecu and other items in order to get the engine to start and stay running.

[@banditgrizzy1955]

@@JaguarXJRman Dang... you sure got around back in the day. 👌😁👍

[@darylSKYTZOwillis]

That 2 stroke V8 sounds sick. 👍🏼

[@Spencer02]

Holy cow! I love that SEMI truck. That baby grows like a lion. You seriously hear that 2000HP just idling. Absolutely impressive 👍👍👍👍

[@gerryr8400]

I love how some guys still love that motor and so do I cause my dad worked on them with Cummins and Mack and love hearing the SCREAMIN DEMONS IN THEM and BEST EVER SOUND OVER ALL MOTORS OUT THERE💪💪💪🥇🥇🥇🏆🏆🏆🍺🍺🍺Can't wait to hear the V12 now

[@burtbrooks7731]

First common rail Detroit that style that is an actual RIPPER💪 the build videos of this thing are definitely worth watching ❤❤

[@ProctorsGamble]

That self closing hood was a great safety idea! 😂

[@bush600r2]

That truck and engine is absolutely awesome!

[@markcrockford9679]

so what I'm hearing is If you uprate the stock blower the stock turbo sandwich a bit more fuel and you are doubling your horsepower! I'm a bit jealous ! well done!

[@SamuelRSands]

From a point of view of a parts changer this dude to me is a genius

[@troydodge111]

I had the pleasure of working at Detroit Diesel Remanufacturing Central from the mid 90's to early 00's. I will never forget that 2-stroke diesel sound coming out of the 8 dyno rooms.

[@jeffoldakowski3340]

Congratulations on workmanship and knowledge on your truck it looks awesome ,I’m sure it sounds awesome again

[@shawnhurley3815]

I'm not exactly a diesel guy, big block GM man, specifically Chevy rat motors, but I have always considered old Detroit two strokers to be the most reliable, bad ass diesel engines ever! 💯👍🇺🇲

[@billshepherd4331]

I Love an old school Detroit! I had two 318 powered trucks in the 80's

[@jameshathaway5117]

Off the shelf marine injectors for the detroit get pretty gnarly so running out of injector options is nutty to me.

[@duramaxdiesel8]

He had injectors from back in the day racing 250cc

[@rickbullock4331]

Wow! That old girl ain’t no slouch. A lot of really powerful trucks there. Quebec, home of the clean air truck races.😳Vive Quebec.👍👍🇨🇦

[@robertseguin4875]

amazing and creative I love original stuff, great job

[@daltonthorn4744]

I heard the that thing fire at the show and it was amazing. Love the trucks bruce.

[@_..-.._..-.._]

I’m obsessed with 2 stroke diesels, I’ve been playing around in my garage making a 2 stroke diesel that doesn’t require a blower, I want to set a specific output record for NA diesel engines. Currently the Mercedes Benz OM 60x series is the highest output NA I’ve found, the 2.0 liter OM 604 puts out a tad under 100hp and therefore sets the bar at 50hp/ liter for NA diesel. Compared to NA spark 4 cycle engines on race gas (not alcohol) around 380hp/liter. I could be off on the gas record, many small 50cc engines could exceed that. I know of a 120cc compound turbo Honda ct110 that makes 60hp which would be 550hp/liter for turbo engines.

[@CreRay]

Playing around... you understand that 2-stroke engines require some sort of pressure difference for scavenging, whereas a 4 stroke doesn't right? There are good reasons as to why these engines were unsuccessful. Your only option with a diesel is using exhaust pulse, since crankcase scavenging like on the 2-stroke gasoline engines is not possible. The only engine that worked to some degree with that concept is the Crossley HST Vee 8. If you understand the physics then you'll also understand that the concept is only suited to engines that work at a very small rpm range, and will never achieve a high specific output.

[@CreRay]

You are spot in citing the OM604 having the highest specific output but in standard form it makes 94hp in 2.2liter form. But don't forget that Mercedes mainly increased the output through engine speed, not torque. These engines make their maximum power (in standard from ) at 5000rpm, which is unparalleled for this category of engine. Since diesel combustion is inherently slower than gasoline, it's not really an option to increase the engine speed much further as smoke increases sharply (and efficiency decreases).

[@finlaymcdiarmid5832]

The NA petrol record is 434hp/ltr by the way. One of the 2010 formula 1 V8's got it at 21k rpm but that was only testing, wasn't race legal due to 18k rpm limit.

[@banditgrizzy1955]

😎 nothin beats old equipment with modern power.👍

[@JimmyChambers-sc9oc]

That's far from modern. 😅

[@KnuckleDragginDad]

I don’t know anything about semis let alone diesels but listening and watching that truck start up and take off and run left a smile on my from ear to ear! What is 2 step or 2 stage you were talking about when he started the engine up? ✌🏽🇺🇸🙏

[@thomasr.5443]

I gues he talks about the turbo charger, isn't he? I think there are 2-step chargers, like twin- or bi-turbos... 🤔

[@northofhwy8180]

Very cool two stroke

[@jackmeoffer9334]

there is nothing meaner sounding than a 2 stroke Detroit. silver 92 4 life ❤❤

[@jlo13800]

I have a silver 8v92 out back top tinker with. I wonder how much turbo boost (psi0 this 2000+ hp 2 stroker is making?

[@jackmeoffer9334]

@jlo13800 silver92 has a super charger with turbo on top and you can get about 45psi or so out of a factory set up

[@jackmeoffer9334]

@jlo13800 this thing probably running 70

[@jlo13800]

@@jackmeoffer9334 45 psi on a arctic cat 858 snowmobile would be insane

[@jlo13800]

@@jackmeoffer9334 70 psi is this is what seen at the intake ports?

[@Anonymous..VQ3.5Lg35]

Thats a badass build with a v8 detroit!!!! I like this type of stuff!!!!

[@76629online]

The neat factor on this thing is off the charts - I love it!

[@stanley1554]

Love this. amazing work. It's a beautiful thing to be capable and passionate about something.

[@uglyjonah6412]

This is magic, the sound, that meaty feeling of being connected to machine, this whole U.S. Trucking Culture is just romantic :) European is just technical, maybe a bit more comfortable but I feel like it has lost its mojo. With Scania being sold to germans it's an end of an era in European trucking - it was the last real manufacturer in my opinion with their V8 sounding magnificent. I used to ride inline 12 liter manual with chipped engine, this sound and overall feeling gave me so much joy it was enough to compensate inconveniences of this tough profession. And I can see this 'europeisation' happening for some time in US with new models of old trucks. How do you guys feel about it? Do you like Cascadia being Mercedes in disguise?

[@thechongwolla]

I think the Renault T range is still made for the driver. I absolutely love them, the best modern truck imho. The engine brake still has that good chugging sound and the controls are so nice to use. They still feel like they have some soul left in them. It is kinda cool how quiet and fuel efficient they can make modern trucks but they are definitely losing their soul. It's like driving a gaming computer attached to a 400hp tumble dryer rather than a mechanical diesel engine that chugs and grinds and sputters and feels alive.

[@uglyjonah6412]

@@thechongwolla yeah xD That sound you're describing brings up memories of driving Merc Actros Mp4. It really sounds like lawnomower with constantly breaking DPF system and no torque.

[@JustinDoussept]

Anybody that knows anything about anything, knows that this is the coolest thing in the diesel industry

[@justinherdman87]

I was gettin bored of youtube... this truck and its 8v' just gave me a new reason too watch KZbin again...

[@kevenhiemie]

How about a Detroit Diesel build off between Bruce, Tim Gentry and Wayne. My money is on Wayne. I was just watching Wayne latest video until KZbin said Bruce had a new one out.

[@ruxoneto6560]

Wayne hands down!!

[@noahmiller1655]

That thing is sick love thar truck

[@RedneckSpaceman]

It is too cool for school, eh??

[@ethanmudgett7384]

Sounds like a cammed firetruck I love it haha

[@79tazman]

That truck is bad ass I love how it sits and shakes like it's just ready to rip

[@dieseldoctor2221]

That is music to my old mechanic ears what a sweet sound!!!

[@HayesTransport]

I’ll be there tomorrow, I’m in Pacific, MO on a 10hr

[@toxicwaste3120]

That was amazing Detroit Diesel Muscle 💪💯

[@79tazman]

ol2stoker is Wayne from NY and he loves his Detroit diesels

[@linushogberg5912]

WOOOW LOVE 2 STROKE DIESEL 🤤

[@Allegronaut]

Truly the Godzilla of Detroit 2 strokers! New beauty from an old classic!

[@AlexanderTheGroupGT1Racer7]

Nice 2 Stroker Lorry, and also very powerful lorry nice!😎

[@NOSUBSCRIBERSWANTED]

Reminds me of a build at Werner Enterprises build by the owner Clarence L. "CL" Werner some time ago. It was basically 2 engine blocks bolted together. I got to see it in his Truck Museum in Omaha back in 2001. I recall hearing it got banned in California because it was too noisy. It sounded like an Apache helicopter coming down the road. They used for recruiting new drivers and they'd drive to truck driving schools. If your ever in Omaha, check out CL's Museum and truck simulator room, it's cool.

[@zackerythomas4536]

Hell yeah that thing is sick

[@mikedalt3622]

Crazy build… home built too

[@kferg6952]

Hell yeah, love that beast!!

[@dolomitus]

2m57s in & I already love this! (and that goes for the red buggy in the scenery as wel ❤).... big regards from the Netherlands 🖐️

[@paulemmerich9166]

Was at the truck show in Joplin but missed seeing you there

[@edwardstephens247]

This engine is unbelievable!

[@dwarnermg]

I like the 1/2” safety cable for if it over chooches and blows the top off

[@paulskillman3746]

So awesome love the old GMC what a great truck nice job thank you for saving automotive history!!

[@christramontana3598]

I've been following Wayne ole2stroker for a couple of years now his channel is cool and he's funny and Ive seen that gmc at the truck pulls in Farmington Missouri a few years back it was cool

[@jaredandrews379]

Sucks that 4 state canceled the pull! Saw your rides yesterday! Looked clean!

[@V8AmericanMuscleCar]

That was so great to watch and these trucks sounds better than any modern sports cars.

[@richardhiggins8820]

Local guy here has a big 12-92 twin turbos big injectors and some other stuff it's a log truck/lowbed truck daily worked

[@darwonboyful]

What an absolute ripper! I love it

[@rolandbishop5379]

It was awesome getting to meet you sir and that truck is wicked

[@kevinvoyer5053]

I can’t wait to see what the man does with a buzzin dozzzen!

[@brendanroberts2032]

Amazing! What a great and unique idea

[@derekstocker6661]

What a an absolute beast! The description of what is under the hood lost me after the first couple of sentences BUT what a great racer this is and the amazing work that has gone into it her rebuild! Thanks for this guys and keep up the great work, love this great sound too!

[@joshjones3408]

There's a video of Wayne an the guy the built the fuel system on that engine...👍👍👍

[@jasonzapata8274]

Sled pulling is cool, but if you experimented with uphill drag racing....got dayum

[@arthurbiringer5676]

That’s one SICK truck!

[@rafadrzewiecki1905]

What a truck! 😮 Amazing work. Beautiful looks and sound. Masterpeace!

[@mikemerrill175]

This man knows engines!

[@Braedenoneill]

Now this is what I like

[@DanEBoyd]

Excellent video!!! I watched the build on Ol2Stroker's channel!

[@davidforsythe3037]

Wicked. Respects from Canada

[@greggreg2263]

Trucks pretty cool can he swing it and do donuts in the middle of an intersection with that thing?

[@amilcareposti2437]

Detroit Diesel, love you❤️❤️❤️

[@michaelhooper4479]

THAT OL'GIRL GOTS SOME PEP. THATS SSWEEETTT !!!!!!!!! AWESOME CONTENT GUYS. 🤠🤠

[@wesleymadsen4357]

I've seen and love that Detroit 💪🏻

[@RedneckSpaceman]

Give it a Nice Paint Job and Pimp out the interior!!! I wanna try it out!! I'd be happy to just go 35 - 40 on a nice wide road!!

[@dustinhardin6922]

Bruce it was nice to meet you at the GBATS show and also your brother hope to keep more videos coming

[@jeffrey7089]

'Common rail is why all the new trucks run clean' Proceeds to eclipse the sun

[@justin_steen]

Lmao right, he’s probably losing 50-100 Hp over fueling it like that

[@number1trucker]

I love the sound of a Detroit. There is nothing that sounds better

[@jerrycobaugh1239]

He sure knows his stuff

[@jeffrey36rich]

Such cool content Bruce, nice job saving your video.

[@the.porter.productions]

O-H-I-O Porter greetings 🇺🇸 Love the old truck & the story behind it. And it was previously a wrecker?! My dad had one like it. The engine sounded like it wanted to scream like a typical Detroit engine does & was happy to show its power. Looked like he was jammin on those gears!! WOW! It was good to see that beast roll! 🥰😎✌️

[@woodwelder]

The guy’s a wizard …! Hats off mate !