Brushed motor squeaking noise fix traxxas slash 2wd 550 12 turn motor

[@DrLamb13371]

exact same noise mine is making. Was about to strip the transmission apart but luckily just seen this video. Will give it a go in the morning. fingers crossed

[@California0Rider]

+Harry Baker Haha I was just at the same point too. Did it work for you?

[@DrLamb13371]

Fixed it right up.

[@California0Rider]

Thanks! I'll give it a shot

[@gregchisholm2127]

thanks man you saved my life i thought i brook my rc first day lol

[@MJC10121]

Gregory Chisholm same

[@Thesoccerkid587]

Hey man I appreciate what u did this helped me with My Traxxas Slash 2wd

[@madethejump]

Thank you after years I found this video and it helped thank you

[@1968usaf]

My Slash motor had the same noise. Discovered the inner armature bushing had worn to an oval shape due to dust that was sucked into the motor. Replaced the motor and installed an Outerwears pre-filter. Also make sure after cleaning the motor you oil the armature bushings. Any light machine oil is OK. I use Singer Sewing Machine oil. 3-IN-ONE or fishing reel oil will work too.

[@TheZouix]

Can put pressurized water?

[@petermuller6923]

Thank you! Worked perfectly for me after using lots of electronic cleaner and always spinning the motor :)

[@sunniestpluto]

my motor started making that noise after i ran it in some muddy water so it was full of dirt so i tried running water through it to get the dirt out but that didn't work so i ran some alcohol through it and it started working perfectly.

[@tylerjohnson5497]

Did you use like rubbing alcohol or what?

[@carsonquist2574]

Do you know if WD-40 would work? I only need a temporary fix to the problem.

[@mlgnoscopeblazeit7708]

It works

[@kevintomyn4400]

Don't use WD-40 it contains metal and will destroy your car!

[@carloscer]

Excellent video ma7moodz8, a question, Do you have a video on how to wash the traxxas RC ford f150 2wd slash chassis, regards from Venezuela.

[@CoreSharkRVX]

Can’t wait to get my slash back on the trail :)

[@sidewinder3411]

holy crap thanks dude i thought i broke all my motor stuff lolz

[@aidanmiller24]

Worked great! Easy fix too! Thanks

[@kaydenyap5677]

Would wd40 work

[@jaketherake8710]

Kayden yap yes it would

[@mitchgiovanni8432]

This happened to me and I washed it out. that did the trick. but now, the next day it is making worse noises any advise?

[@jimsrc2196]

Mitchell Teresi need to lube the motor after cleaning . . The bearings arent happy otherwise

[@jesusishere9734]

can you use WD 40? just wondering

Yes !

[@connorgrow7794]

Are you sure? RCDuck's

WD40 is not conductive , and i have used it on electronics for 6 years and no problem

[@CASH_ces7899]

Guerrero 117 I use WD-40 White Lightning grease. Works awesome. It's a white grease. Same bottle, yellow cap.

[@jenniferhalyk6286]

That was very helpful thank you 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@n1tr145]

thanks now my slash 2wd works again!

[@melissaspencer4012]

ive had this problem for a while, ive just been running water on it, it would work for like 3 minutes, then it would happen again, i will try this to see if it works

[@connorgrow7794]

what cleaner did you use?

[@Jarrid313]

Connor Grow just general electronics cleaner, you can pick it up in the automotive section at walmart , like 3 bucks

[@jaketherake8710]

Connor Grow you can also use wd40 for the shaft part only not in the inside. You do not need to put it inside the motor just the little Bearing that is holding the shaft in place.

[@sh1fty42xl4]

I had this exact problem with my slash 2wd, it ended up being the bearings from the motor, i had to lube them both up and noise went away. no spray alcohol in the motor. the drive shaft that sticks out on the left side of the motor got a little dab and the small main drive gear bearing got a dab. poof fixed😉

[@hotcroc2856]

Thanks broo...u saved my crawler :)

[@musicman6887]

Does it work with none brushed motor (traxxas rustler xl5 motor)

[@hugosonier8159]

xl5 is the esc. the motor in the stock rustler is the titan12t wich is the same in the video. the titan is a brushed.

[@12gauge_shawtyy]

That’s the exact same noise I have after running it in the ocean

[@koalafiedgames3691]

Deep Thought lol

[@gleefulsgaming3688]

thx so much

[@ectorsgranneh8168]

It sounds like a porg from Star Wars

[@calebvandervelde]

have same noise lol perfect video

[@gustavsandrup1380]

a better way is to remove the motor and run it in some water until the motor is clean. But do make sure to dry the motor afterwards by running it

[@ddd228]

Sure! Just put it in the sink on a 3-4 V. pack. Works great!Dry and lube,after. The motor won't care if it gets dipped into the toilet,either!

[@aidenmaves5537]

@@ddd228 2 years late but what do you use to lube it

[@killianseibel62]

@@aidenmaves5537 hey if you ever see this reply use water proof greese

[@aidenmaves5537]

@@killianseibel62 will do thanks man

[@mxcheto]

Hello ! Could somebody tell me if this method will work the same with my brushless motors of my electric mountain board? THANK YOU !

[@M4CHINE69]

mxcheto it should

[@kaydenyap5677]

If it has a brushed motor than yes

[@michaelcontreras6966]

Easy fix change the brushes

[@tonyaguillon8361]

Thank you.

[@douacuvinte]

the motor bushing is out, been there.

[@majorwoody1az1]

i literaly just threw some PB blaster in it and havent had it since

[@connorgrow7794]

how do you clean a brushless bc this vid is about brushed?!?!?

[@jimsrc2196]

Connor Grow pull motor out of truck and remove 4 screws holding end cap on .. removeparts carefully and clean it up in & out . . Check both bearings on the ends and repace if needed . . They sell rebuilt kits for the Velineon motors

[@brandonyurko4669]

Thanks man.

[@davidruzicka5194]

Thanks my car had that noise too

[@n1tr145]

yhanks i have the same problem

[@adrianherrera7121]

Yo tengo un motor igual y un esc y le paso lo mismo pero ya no agarro

[@racew3039]

i got my rc and every time i plug in the battery it turns on otematikly and rite when it turns on the lite goes green for one second then it flashes red ones then twice then three times then repeats dous anyboty know how to fix that

[@abdurrahmanjilani5931]

Yea replace tge battery its dead

[@sled_neckx9972]

Race W your esc power/program button is stuck.

[@dmaxdilly]

Power button on esc is stuck

[@timtv2350]

I had the exact same thing

[@rcthunder7778]

guys it's easier than This! I've had this problem in multiple motors, some I just replace but most of the time I use my little spay bottle and spray some water in and it doesn't make that noice for about 5-6 runs!!

[@michellepoorman3628]

I hope it works because I tried everything I have tried electrical fast drying spray it works after one run and I come back to drive it Agen and it makes that sound Agen so I guess I will see I'm going to hobby toun USA tomorrow and see what they half to say so by

[@treylee6337]

Mine did the same thing

[@OmegaHellHound543]

This video shows a better more expensive way of doing this, but I have a more inexpensive way of doing it. Note: this is not as good of a method as shown in the video. You need some rubbing alcohol 70% ipa is what I used, pour the alcohol into the cap for the bottle until the lid is about half full, and then pour the alcohol from the cap into the motor, and run it. This should work

[@Lokithefeline]

would be more effective if u took motor off so so you can get it inn there better

[@Dylan-sq3gz]

My motor blew up 😔

[@rc4life613]

Use wd40

[@jaiveerbajwa928]

Same thing happens to me

[@1996colby]

Pb blaster works better

[@michaelgutierrez2975]

This happened to my brothers car and it was my fault lmao

[@zoomdoom9439]

Mine had that nose know it won’t move at all

[@valentemartinez3070]

jacob wind did you charge it

[@Jonas-fm9xj]

Ur diff is broken

[@Stonyartist]

That has hapend to me to

[@tryingtofindstuffintwfbutg8336]

I thought I destroyed my slash

Its nothing , just add a lubricant to the motor

[@nolanlafountain9827]

I just spit in it lol and it quits

[@jasonfocht7830]

Could I use pb or wd40