Thank you for the excellent video -- it helped me out a lot
@xe-chevy85562 жыл бұрын
Do you know what length axles I would need for a 6 inch lift on my 05 brute force 750
@Simpsons.R.S2 жыл бұрын
I'm sorry. I do not... I unfortunately haven't done any lift kits on quads....we don't get to much call for lifted quads around here.
@komunakomunalska16642 жыл бұрын
great video, i have a problem my friend.. my right rear wheel bearing keep breaking, whats going on ? its the 3d i am changing already,, btw then the first one got bad i had to ride the bike for more than 5kms like that..could that damage something else like the hub or the knuckle ?
@Simpsons.R.S2 жыл бұрын
oh absolutely that could damage both. if it keeps going out. theres s couple things to try... 1. make sure its a high quantity replacement bearing. 2. check knuckle and hub for any defects. 3. make sure the axle nut is torqued to spec.
@komunakomunalska16642 жыл бұрын
@@Simpsons.R.S how to check the hub or kncukle , what signs to look for ?
@Simpsons.R.S2 жыл бұрын
you can just look for wear marks. the bearings should fit in there tight. if they just slide in there... well it might be out of spec and needs replaced.... or bored out and a bigger bearing installed.. but thats a good bit more work 😅
@komunakomunalska16642 жыл бұрын
@@Simpsons.R.S so chances are bigger that the hub is gone not the knuckle wright ? thanks for the fast repleys my friend
@Simpsons.R.S2 жыл бұрын
i would say the hub would get more damage of the two. but ya once its apart you should be able to see some damage.
@jasonproffitt85872 жыл бұрын
Would bad wheel bearing make my handlebars shake when riding?
@Simpsons.R.S2 жыл бұрын
Wheel bearings can. But tie rod ends would do it horribly.... Definitely check those before riding again.
@jasonproffitt85872 жыл бұрын
@@Simpsons.R.S k thanks that's what the dealer told me the tire rods can do it also it not a bad shack but it is a 13 year old bf 750
@Simpsons.R.S2 жыл бұрын
Haha ya. If it's that old.. probably not a bad idea to look into upgrading them.... little bit of money but definitely worth it in the safety department
@jasonproffitt85872 жыл бұрын
@@Simpsons.R.S lol yeah it needs a little bit of everything, the power is still great though
@Simpsons.R.S2 жыл бұрын
Haha the brutes are fun... I did another video changing the oils on mine the other day. I need to change the front a arm bushings.... so I'll probably make a video showing how I change mine out 👍