You are looking at a board that is not where the optimal working distance is, it's mounted about 1-2cm above. Therefore when using full zoom your autofocus depth is not big enoght for the board on top, (it would work on the lower board thou). The simple solution is to put the microskope on a book or something of about the sam thickness, then you get the correct working distance and it will work just fine. I agree about the software, it should be a more professional solution than YouCam, but as long as you just use it as a microscope you don't need any software at all. Best Regards Mikael
@samykamkar7 жыл бұрын
Thanks for the video. Is there another camera in the same price range that you do suggest?
@rockybilla85025 жыл бұрын
where can i buy it?
@pjmillah21724 жыл бұрын
They have a website. You can also get one through a licensed dealer. It's a considerable investment but well worth it depending on what you are using it for. I work in quality engineering and it's an indispensable tool. We just purched a new model to replace our older model. All together it was slight over $9k. The new one we purchased is also capable of measuring when calibrated properly. Our old model was also able to do measurements as well.
@wepipe3 жыл бұрын
Tagarno =a stinking shite rip-off firm - completely destroyed by this honest decent user !!! Good on yer fella !
@stevendegreef937 жыл бұрын
Lose the mustache and the frown! Great camera review, thnx
@durandalgmx76334 жыл бұрын
Keep the mustache, its great, but lose the imperial units, that's so 1733.