Got me an old p51. Need to learn more about piston and cylinder wear as I am concerned that the piston is worn . Thanks for all the work you do in teaching as old farts.
@jayball73604 жыл бұрын
Be careful taking out the web in the exhaust it's there to keep the rings from opening or uncompressing and catching the port opening also if the piston is short skirted at high rpms the piston can actually cock into the port. I used to have a Suzuki quadzilla 500 and it actually broke that web out at high rpm and the piston hit the top of the port and bent the crank and broke the case. I have also made my exhaust port to wide on a 390xp and had the rings open up and catch the top of the port. Just somethings to think about I know it's a rare saw with rare parts. By the way love your channel I'm a logger from North central PA. My Dad, Younger brother, and I logger together for 16 years now.
@Foleyathome4 жыл бұрын
Hi Harvey, I want to thank you for sharing your knowledge and lifelongs experience with us here on KZbin. Your reaching people that are further away than the end of your road! Just want to know I greatly appreciate your time and what you do whether it be saws or bikes. Love these little gems of info, you can't get that anywhere else and know that it is not lost on us. Once again thanks Harvey. 👍👌
@mikeremski21024 жыл бұрын
Take one part logger, one part moto-rider, shake until chill. Moto 2 cycle performance tricks, applied to a logging saw. Incredible; lot of knowledge about both domains. Thanks for sharing this.
@Bluesbone0074 жыл бұрын
Can’t wait to hear it fired up. I love watching these steps. I must admit I don’t have the mechanical no-how, but you can’t blame a guy for hangin around, learning a few new words and supporting the community. lol
@matthewclarke79934 жыл бұрын
Great video Harvey and buckin is going to have a blast with that👍
@brandonmclaughlin34734 жыл бұрын
Billy Ray is going to have fun with that power saw!
@treebender2614 жыл бұрын
I got a name for it Johnny cash you know the song that name came from this is going to be a neat build I get to watch you on the R&D then buckin cutting up the big wood it's a 2for on the same saw I am excited 😁
@Peggydtw4 жыл бұрын
I watched all of your videos, and about the comments and getting back to them on-time...it's no big deal, we know you're busy, IronHorse. Happy Prosperous and healthy New year to you and your Family!
@georgehakey35814 жыл бұрын
I chopped with a p42 for years, loved that saw ,looking to buy one .
@skippyjones20774 жыл бұрын
Hey Ironhorse thanks for sharing your videos Brother 👍👍❤️❤️
@NootNoot674 жыл бұрын
I knew those older saws had reeds in them, but I did not know what they looked like. That one looks like a mouth piece off a clarinet. I had an old 7.5 hp Montgomery Ward boat motor made by Clinton (gosh, when is the last time you saw a Clinton engine?) I used to see them on the old Yazoo law mowers, but I believe they were 4 cycle. Anyway, the reed on the Clinton boat motor was made of stainless steel and looked like a daisy (flower). I was down Cedar Bayou (I lived in Texas then) and the darn thing swallowed one of the petals of the daisy reed. Good thing I had a trolling motor and a good battery.
@MATT.MAN-PEACE-LOVE4 жыл бұрын
See that bridge in there? In that exhaust? We're getting rid of that bridge! I don't want no darned bridge! Harv love ya man! Peace and love to you and the family all the best for 2020! ✌️❤️
@richr18704 жыл бұрын
Can't wait to see that saw run Harv! Buckin is going to go nits with that thing! Peace.
@evankibbe5904 жыл бұрын
Going to have a time waiting. I had a hard time waiting to watch this one. I'm excited. 😊😊😊👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@pentecost664 жыл бұрын
On dirt bikes we add a carb spacer to gain low end I hope that big carb doesn’t make it stumble will find out. This is a exciting build great job.
@douglynch84424 жыл бұрын
That build is going to be impressive, if not scary! Can’t wait for the fire up! Thanks H!
@leesanders88244 жыл бұрын
Can't wait to see it run!! Happy New year everyone. Love you and love the channel Harvey!!
@StihlChainsaws4 жыл бұрын
I love watching you work on these small engines. Happy New Year STAY SAFE
@marcelw49724 жыл бұрын
I just know Buckin will be tickled with it! Love your videos Harvey! Best of the New Year to you & your family. We come here for you, the great knowledge we get from you is just a bonus! Edmonton, AB. CAN.
@kennethmaas64734 жыл бұрын
Good job ironhorse love your builds can't wait to hear it run. Happy new year Harvey.
@kyledavidson18244 жыл бұрын
Happy new year to you and the family much love from Indiana!
@bobfitch6074 жыл бұрын
Interesting build harv. That saw is going to rip. Look forward to seeing the rest of the build and hearing it take off. Hope your new year off great as well 👍
@eriknelson65294 жыл бұрын
Great job Harvey! That will be an unbelievable logging saw when it's finished. Can't wait to see it. I'm sure buckin will love it !! Happy New year everyone!! This saw will start it off with a big bang!!
@barryespeseth73554 жыл бұрын
Happy New Year from NE Ct. Looking forward to this special Buckin build.
@jolkraeremeark69494 жыл бұрын
You're gonna do a great job, professor Ironhorse - best of the new year to you and yours! 👍✌👍
@eddyarundale15664 жыл бұрын
Nice video, Happy New year 👌
@timothymuncey92994 жыл бұрын
Really enjoy this channel. Your one of the few that shares your knowledge on the saws. I like the other saw builders channels to but you just go the extra step in explaining. Thanks and happy new year
@SSW86824 жыл бұрын
Have a prosperous new year mr iron horse prayers for you and your family be well
@jjknowles73484 жыл бұрын
Happy New Year to you. Can't wait for your next idea. Kids will be thrilled when you show up to talk. I know I would. Thanks for a great year of saws and stories. You're the best.
@robertdouglas34564 жыл бұрын
Great video Ironhorse!.. Happy New Year to You & Your Family! 🌲🌴 Be safe & stay Positive! 😊😉
@winterswijk19704 жыл бұрын
Happy new year mister Ironhorse,, love the videos.
@markjoudrey70364 жыл бұрын
That's going to be an awesome build.Looking forward to the updates.MJ
@jamesmcauslan13474 жыл бұрын
I love this stuff ironhorse 👍. Hope you have a great new year harvey.
@Woodman_Custom_Sawing4 жыл бұрын
Cool build, I like it!
@travisweldmaster78154 жыл бұрын
Were glad you did too uncle harv, love you buddy
@alanmagnuson82444 жыл бұрын
Great videos thank you for showing or talking about what you will be doing to the Reed's. Was curious where you sand down the Reed's to help them flow better. Also thanks for going over the timing and duration on other saws.
@deaniverson46714 жыл бұрын
You are the mad scientist mr harvey!!! Love it. Mr buckin is going to get a monster, lol.
@todroth56824 жыл бұрын
Happy New Year Harvey Nice build you’re working on
@tazman-kennyfuller4 жыл бұрын
I love e seeing this. Makes me want to do some work on my P51. 🌲❤🌲
@danschramm13974 жыл бұрын
Happy New Year Ironhorse !!
@bobpurs4 жыл бұрын
Gonna be exciting to see this one run. 👍✊
@dwoods11784 жыл бұрын
Hi Ironhorse! Interesting carb stuff...
@jeffreyrubish3474 жыл бұрын
Pretty interesting project!
@proteuspatrick79584 жыл бұрын
Happy New year Harvey.
@Thetreefella4 жыл бұрын
Preach on sir.... Your knowledge is priceless... 🖤💛🖤💛
@ronsilva5164 жыл бұрын
You are old heritage there not many of your kind around these day keep the education going 😎😎😎😎😎😎
@l.w.petersen73594 жыл бұрын
Looks like it´s going to be a wild "little" saw that one - well 80 something cc is not little but it´s probably going to act more like a 100 cc + machine. Love it Ironhorse :-)
@jamiedalluge94724 жыл бұрын
I can't wait to see what you think when u get it buddy
@kirbycook42974 жыл бұрын
I always liked pioneers
@joedyer88244 жыл бұрын
Little bit of fab work that sucker is going to work Harvey that the fun in trying out different stuff I'll bet that saw is going to scream hot dang can't wait
@mrandrewdennis14 жыл бұрын
Thank you for the shout out!
@drewdouglas48834 жыл бұрын
Happy New Year
@jonathanharsch32434 жыл бұрын
Can't wait to see it run
@woodchuckman27534 жыл бұрын
Thanks for the knowledge teacher
@jeremybuchanan47594 жыл бұрын
Happy New Year!
@bzbcustoms45204 жыл бұрын
that's going to be an awsome saw their
@dougcooper20514 жыл бұрын
If that thing runs like 80cc dirtbike that will kick butt cant wait to see it rip.
@bentwedgestanleybrand58184 жыл бұрын
New bib overalls handsome
@traynegrau82484 жыл бұрын
Happy New year's day to all of the Ironhorseians out there in tube land and Harvey you old horse whisper you happy new year too you as well!!👍👍👍✌👊
@sparker22894 жыл бұрын
I want you to make my crazy Ironhorse. Hope you can start it soon
@michaelwhiteoldtimer76484 жыл бұрын
you may have to bolt it to the floor so it don't take off when you start it, can't wait
@jamiedalluge94724 жыл бұрын
I seriously need to get your present to you iron horse
@bentwedgestanleybrand58184 жыл бұрын
My uncle Hank s c h e b o r work at Town & Country Hardware in Michigan. They were on McAuliffe chainsaw dealership. Plus Toro. That's the type of people I grew up with. They are hard to find anymore.
@pm2701004 жыл бұрын
ya all good /////?????all the best have a good one ////more in more out more power a bit of time there with rods and shafts
@richardsullivan17764 жыл бұрын
Harvey, do you like Poulan? That almost looks like a Poulan 225 behind you on the shelf. Its looks green but I think it might be the lighting.
@elizabethfinaly99794 жыл бұрын
COOL VIDEO SO EVERY ONE LETS GIV OL IRONHORSE A BIG THUMBS UP LOL OH MY NAME IS CHRIS NOT WHAT YOU SEE
@williamnicholson18532 жыл бұрын
Hey ironhorse, im studying a p41 to port it and am wondering about cutting those skirts around the transfers in regards to supporting the piston skirt? Arent those 2 areas critical because of the direction the piston in this style of saw? I thought about cutting those skirts but i t looks like they support the piston skirt heavily. What is your wisdom on this?
@docwy87634 жыл бұрын
Great video sir! Have a question, what size bar can you run on a 60 cc saw, plus a 54cc saw? Great videos thanks
@Woodman_Custom_Sawing4 жыл бұрын
I run a 24" bar on my ported 60cc Jonsered 2159.
@jeffjohansen49454 жыл бұрын
Hey Harvey you should build a dirt bike with a chainsaw on the front of it!
@neild79714 жыл бұрын
Can someone explain the function of the reed please? I will continue watching, maybe he talks more about it later in the vid...
@vtecpowersaw15774 жыл бұрын
Very interseted in this reed valve build wondering how much more you can push your timing with this
@raellsworth125744 жыл бұрын
If u cut the bridge out, does that mean u have to use a piston with ring pins in it?
@anthonyronsani99894 жыл бұрын
Hi Mr. Iron horse. I was just wondering where you are located. Thinking about sending you a saw or two to look over.
@Woodman_Custom_Sawing4 жыл бұрын
Southern Tier NY, send him an email. Ironhorsechainsaw@gmail.com
@anthonyronsani99894 жыл бұрын
Thank You Marshy
@damonhart12684 жыл бұрын
it strikes me that you have thinned the reed, as to let it flex more easily thus increasing the flow; do you have a guesstimate of how much it is thinned down..20% ..10 % ? also wondering how much of the reed ( in length ) did you thin down?50% 75%
@shaunryan10774 жыл бұрын
Ironhorse how you
@MultiMiller712 жыл бұрын
How do I get a hold of you to send my P51 for similar work?
@ButlerOutdoorsCanada3 жыл бұрын
Howdy Harvey!! I've got a p42 with a smashed up reed block, Do you happen to know of or have a replacement p42 reed block I could buy? Thanks ither way love your videos!!
@theironhorse66003 жыл бұрын
I may have one! Let me check!
@ButlerOutdoorsCanada3 жыл бұрын
@@theironhorse6600 thanks man!! If you do just let me know what I owe ya if your willing to part with it!!
@patdenney70463 жыл бұрын
I had a p p60 a p 61 and a p 62 all of them built they ran a little hot I gave them away in 2000 I thought I was done Fallen Timbers and I have the Husky 2100 built twice it couldn't beat my slowest P saw so the dealer had to pay for the build any was the pioneer dealer before he a husky dealer couldn't believe it I didn't have the heart to tell him it was my slowest saw them babies ran the person who built them with the best around who were the saws were his unfortunately got killed in a truck accident and I ended up with the saws one that had never been ran who's planning on racing it I don't I don't know if it's my imagination but I don't think I've ran a faster cutting saw or maybe I was just younger
@dyer2cycle2 жыл бұрын
Interesting story...but I'm out of breath reading this, man. Punctuation, man..that's what sentences, paragraphs, periods,etc. are for. :)
@cmnosewort4 жыл бұрын
Awesome! What’s your email?
@morgunfreedom43464 жыл бұрын
Ironhorsechainsaws@gmail.com
@robertcicerchi91744 жыл бұрын
if you would like to learn somethig let me know
@Woodman_Custom_Sawing4 жыл бұрын
Start making videos and let us know when you have something to teach us.
@fabzacres-blackcat4 жыл бұрын
Hi Harvey ! I was informed by one of me agents the boys on “OPE” got a thread started about ya and they aren’t being very kind to say the least ! I guess Ol bird legs (mastermind) got a little hot under the collar about the tear down video featuring his saw with the WAY overtorqued jug bolt ... these guys are keyboard warriors who don’t like nobody that knows as much (or more) about saws and if they view you as a threat to their “grind and shine” saw porting business they will lie cheat , character assassinate etc etc ... a few years ago (before getting “banned” ( like a give a f)) Ol bird legs shot his big tapper off in me direction ... well he light a fire under my ass and now it’s clobbering time ! I’ll build any newer STIHL 241c,261c,362c,462c ,461,660 or 661c and the Newer 572xp for 10% less than mastermind and you’ll get a quicker saw ... heck he can’t even stay with Hotsaws101 😀 ... He’s got a snowballs chance in hell against Fabz acres and I’ll GUARANTEE that statement AND the saws ... peace ✌️ link opeforum.com/threads/iron-horse-chainsaws.18681/