STIHL MS500i - World’s 1st Fuel Injected Chainsaw

[@jasonmcmanus6169]

Chainsaws and heavy machinery , older and younger men working . Old and new saws ,old and new trucks. And a big spectrum of skill levels, this video has it all.

[@nathanadrian7797]

My first job was block packer in a small mill here in the Kootenays, I was 13 and they taught me how to run a chain saw with an 070 Stihl, and a 090 Stihl. I had to hook my toes into the handle and handle bars, hold the pull cord and stand up to start those saws, but I did start them. lol. From day one I was in love with chainsaws, and now 40 years later I still love chainsaws, I play with them, and work with them, build and repair saws, but for the life of me, I have never been very good at tuning a carb!!! It always amazes me how quickly you can hear and fix a poorly adjusted carb. God bless.

[@johnnyfeathers2567]

People just don’t realize how much work goes into cutting up a big old tree like that..my good buddy cuts down trees for a living and he works hard but he loves it!

[@jonnygranville281]

I milled 4 planks yesterday with my Echo 18 inch chainsaw. Only 4 planks with the chainsaw mill and my back was sore. My best friend owns a tree service too and you're right, they work really hard but love the work.

[@AATreeService]

True store! Took down a 68” ABH burr oak last year. Took 2 12 hour days to finish that up. 140 foot tall got almost 8 cord of wood from that tree. She was a monster

[@curtis5809]

Nice video- men being men

[@K3Flyguy]

@@AATreeService !!!!!!!!!!! Seriously big wood! I can't imagine trees like that!

[@nicolascatalano5744]

Man she cutts. I still live the sound of that hot rodd 125. You have. Reminds me of sitting at a traffic light and a old man rolling up in his big block hot rodd. And you can feel the cams lobeing in your chest.

[@Comp670]

I bet the ECU (computer) in the 500I has a "break in" tune for the first hour or whatever and then it changes the timing and fuel to full power after that.... The rings seat almost instantly. Cool to see a thumbs up for Stihl!

[@JSomerled]

Could be...

[@AATreeService]

If you compression test the saw it takes about 5-6 tanks before the rings start seating real well. Try it sometime!

[@ljubicabuconjic7743]

@@JSomerled p9au

[@ljubicabuconjic7743]

,87ò556

[@mikecubes1642]

i have seen snowmobiles that limit the RPMs for so many hours until they are broke in then they will gain engine speed and power

[@moose1164]

The 500i is by far the best saw that Stihl has released in my opinion. At first, I didn't like it, but after a week of using it every day in the brush I've come to love it. Mine had a break in period of at least 10 hour run time then it completely opened up. From what ive read other people said the same thing. Out of the box til now it's a completely different saw. Give it a chance you will enjoy it. The thing I like the most about it is the consistency it gives you. The power is always there which is where fuel injected shines in my opinion. Surprisingly I haven't felt like I've needed more power and I've put it in some very big wood.

[@stevefrazier2214]

Drop it and see how it runs. Just bouncing around in a truck bed has required us to bring our “electronic tuned” saws back the dealer repeatedly at $60 a pop. They have to plug them in and reflash/update the tune.

[@andrewnorris1514]

Do you think he will be flashing his own saws should he sign on?

[@moose1164]

@@stevefrazier2214 naw man I totally get where you're coming from. I get it. Luckily I haven't had that problem. I always take extra good care of my tools and equipment though because that's an extra expense that can be prevented by taking the extra time out. Fuel injected saws has alot of room to be improved upon but I think it's the potential gold standard. I'm not a believer in battery powered when it come to heavy usage. The 500i is an outstanding new platform to build off of though.

[@stevefrazier2214]

@@moose1164 we have had the battery powered top handle huskies since they came out, 5+ years? The saws and the batteries have outlasted any gas top handle I’ve ever owned. A husky rep shocked when we told him how old they were and joked about needing to do something about that...you probably know gas are rated for a certain amount of hours of use. We currently have 5 battery saws, including the new version. We no longer own a gas powered top handle. We grab a 50cc gasser when the top handles are not enough. The new husky with the nano cut bar/chain from Oregon is the tits. Battery powered saws for technical climbing and lift work are awesome. No pull start, no idling saw. Waiting for the day a power to weight battery saw competes with a 120cc saw!

[@moose1164]

@@stevefrazier2214 oh I agree. I like the battery top handle saws for climbing but I've ran into limbs that a battery powered couldn't finish the job. The actual power is where they need to make the most improvements in my opinion. Battery power has come a long way and will eventually surpass gas I think.

[@dan-dan-da-treeman]

Always trying to help folks better themselves. The positive is just overwhelming. Thanks for that last little bit.

[@BuckinBillyRaySmith]

if we all lift each other then no gets stomped on

[@dan-dan-da-treeman]

@@BuckinBillyRaySmith ❤

[@alaskanken2132]

This February deep snow is bringing me down. So much that needs to be done. I did also enjoy the closing message we all need a little hope.

[@tommiller1095]

Got 3 of these saws and been using for a year and a half now. No serious problems just need to watch out for the cracking in the fuel tank and plastic is fairly weak .but its and absolute beast enjoy. Tom miller from across the pond

[@jeffanderson6914]

This is my favorite video! Because i have and love the 500i perhaps. Also how nick sent and buckin recieved the saw. Upgraded it and that Donny was there! Wow!! I want to see more adventures with the 500i in the hands of this true master!! Go buckin! Be kind & be productive with the reliablilty of the new 500!!!! Your the man!!!

[@discoverykai1547]

You have a way of making everyone feel valued and appreciated.

[@guns4funfreedomkeeper999]

When BBR cuts a round, you could measure that thing with a micrometer from side to side. That is a testament to his sawmanship but also his skill in hand filing.

[@roberthoovan4130]

I think that’s what years of experience get you

[@lucashuffman6820]

Oooooooooooooo

[@Jalenellis929]

Agreed, he ought to keep and brand some of them for sale/advertisement if he doesn't.

[@discoverykai1547]

You have a unique ability to stay organized and manage your time effectively.

[@discoverykai1547]

Your ability to see the best in people is truly remarkable.

[@sawsurgeon]

Billy Ray... I can’t believe my eyes. ‘Ol Buckin’ is run’n a Stihl and grin’n! And to think, I’m run’n a 395 grin’n! The world, she’s a change’n😉😎 Love ya, Bless’ns to ya, Tedd

[@gettintheresafelywithpatf2869]

Hello Tedd, I’m stihl in shock as well!😂

[@keithrayeski3147]

🤣

[@drueadcock1496]

Yep he has seen the best and worst in the world. The journey is long but Billy now knows the way to go. Thank you Billy, for everything. Champion.

[@shawnfreeoftyranny8849]

Loved the end Bill. Few get or know most men into this kind of work are good hearted, caring Men. Kudo's to you for them words to all.

[@EastLondonKiwi]

Wow this was a very dangerous and technical tree drop, and this team makes it look easy, hats off to you Billy, what a impressive crew. it made me chuckle to watch you all giggling like 5 years olds on Christmas morning over the new and vintage saws alike.

[@daleval2182]

Yeah like no mesh or glasses , or saw pants, to each his own, i had a chain break and wild whip in 70s, bought chaps next day, always wore fog resistant glasses

[@MikfinityPog]

@@daleval2182 But they'll wear ear protection right. No hate at all to Buckin'. In fact, I'm a big supporter of his and everything he does, but his protection priorities are a bit odd. Just saying.

[@discoverykai1547]

Your ability to work collaboratively and build strong teams is truly impressive.

[@discoverykai1547]

Your ability to maintain a positive attitude and outlook in the face of adversity is truly admirable.

[@bogger149]

Instantly changed the tone of that saw! LOVE IT!

[@patrickfarrell6638]

That old saw has some intense power.

[@seanmichelson4291]

That 500 is a monster with that new muffler oh...man!!! Shes just loving that wood!!!

[@thomascheeseman95]

I have a 462 with a bark box and it transformed it, it now so crisp on the throttle. It literally “barks” nice work buckin enjoy the future!

[@Rangolian]

Agree 100%. It really screams with the barkbox. Nice pickup in the low end too. Love my 462. Just wish I could fine a wrap handle for it that doesn't cost 155 bucks on ebay.

[@p1burns]

Nick P just drop-shipped a missile to Buckin’ in the form of a 500i! That saw is a beast! Buckin and Nick P are beasts! Keep doing great things guys!!

[@stephanmackie5281]

Hands down my favorite Buckin’ vid. I’m stihl all the way and this is better than a pepperoni pizza! I’m diggin it for sure. Or cutting it, whatever.

[@kippbrown1972]

Very much enjoyed the review...i really like my 500i... but the bark box is intriguing. Really appreciate the words of positivity, wisdom and kindness at the end....kudos to you!!

[@BuckinBillyRaySmith]

thx kipp

[@MRIsomewhaereguy]

Wow, I never thought I would see Buckin Praise a Stihl! Not that I doubted he has the heart, I've been doubting Stihl 💔

[@timothypirnat3754]

I smiled watching you smile while you were running that 500i. It really powered through that heavy pine.

[@dadof2boys663]

Nick pixel let me start off with a thank you! And second buckin is happy with a stihl in his hands! :) the talent on this site!

[@motocrossm34]

Your 73-79 fords are all gorgeous. Man you have awesome taste. Just discovered your channel the other day. Thanks for your lessons on dropping trees.

[@JDanielsOffGrid]

Well done. That "look" when she woke up is priceless.

[@BuckinBillyRaySmith]

hey jay

[@PeaceCountryBoy]

Yep. Every time I watch one of your videos I think ahhhh that's not so big. A big tree is a big tree, then I get out into the woods and look at trees for firewood and say ahhhh that's not so bad. Then I walk up to a 20" tree I'm going to fall and I realize that yeah, it's dangerous and for anyone to make it in the timber game as long as you have, it is a pretty amazing track record. I've learned a lot watching your videos. Thanks for making your channel. You keep makin videos and I'll keep learning. Thanks Billy Ray!

[@discoverykai1547]

You have a way of making everyone feel included and valued.

[@michaelwhiteoldtimer7648]

A WONDERFUL COLLECTION OF SAWS AND OPERATORS, A LOT OF KNOWLEDGE HERE. LOVE WINS

[@moofdoggmike]

Morning buddy, good to see you having fun with the new saw and Ian and Hogan... can see the joy in your face foolin' around with the saws. Glad to see ya havin another great day... of course! Hey to all, MAGKD!

[@donparker8246]

That Stihl saw was fantastic. The way you plunged it, nose first, into that trunk was amazing. But, that Mcculloch was just loafing while it was plowing through that log. Like a hot knife through butter. 😳👍😁

[@discoverykai1547]

You have a natural ability to lead and inspire others.

[@discoverykai1547]

You have a keen eye for detail and a knack for getting things done right.

[@loadeddog8015]

Welcome to the new subscribers and a salute for the true blues.... Ceikey what a beast of stihl that is . Lots of fun watching these fellas go at it ... top vid mate . Hope all are well , happy hump 🐫🐫🦒🦒day... love and hugs to our cynthinator and mama buckin...Duffy👍.....😎👍🇦🇺

[@pm270100]

how you been

[@loadeddog8015]

@@pm270100 ... yeah been good thx bill , hope alls been well & safe your end..😎👍🇦🇺

[@kevinduff3797]

Hey Loaded dog how's it going?! We are getting the old wintery mix here in Virginia this evening. I guess it's warm for you!😁👍🧡🌲

[@loadeddog8015]

@@kevinduff3797 ...gday duff ol mate , going ok here, hope y'all keeping safe ...... we have the odd warm day here and ther but this year has been a cool and wet summer, bit of a bugger but ya just gota roll with it . ....much love .....😎👍🇦🇺

[@metallicalloy]

Billy Ray, one thing that happens with these computerized saws is they "learn" from the throttle demand and the actual engine rpm as to what the load is. If throttle demand is 100%, but engine rpm is low, then the system can add more fuel to compensate. Sometimes this process takes a couple cuts to allow enough data for the computer to make the adjustments. It doesn't happen with a single quick cut under heavy load because then subsequent cuts will be too rich. If you're doing big cut after big cut, it'll start to dump more fuel in. If you switch back from Buckin' to Limbin', you may detect less power when you then jump back into a heavy load cut.

[@discoverykai1547]

You have a natural ability to connect with people and make them feel valued.

[@discoverykai1547]

You have a natural talent for making others feel appreciated and valued.

[@erichilyard3565]

Buckin I love the 125! Sounds great... looks fun to chunk with! Great video and alot of respected folks having a day chatting, playing and working hard. Loved the axe work too. I really appreciated the video BBR!

[@Thebowzer221]

Bucking Billy Ray, you are the best. Kain't tell you how much I enjoy every 1 of your videos. Keep M coming.

[@jonschaefer1463]

That is so awesome you running that old saw. Great to see. Thank you

[@discoverykai1547]

You have a remarkable ability to inspire others to reach their full potential.

[@mitchzenobitrees]

I felt the moment my 500i woke up, the saw became a whole new animal. I've had the WCS Bark Box on mine since day one, it's and amazing product. Gordy did a great job on it. Happy cutting Buckin'!

[@G_Carter]

So much pure joy experienced that day. Clearly. Love watching masters of their trade having so much fun. Thanks for sharing, Buckin’!!! Be kind friends. Have a great week! 🧡🪵✊🏼

[@tazman-kennyfuller]

Great footage on this one buddy. Love the 125 shows also Buckin. Thank you Donny Walker and Ian Shaw for the great fun of the unveiling of the 500I. Love it all fellas. 🌲❤🌲✊🪓

[@bogg54]

Oh boy. Years back I almost got a mac 125. I ended up feeding my kids(Hahaaahhhhhh!). Sweet mac Buckin'! Loves u all and the Buckin' Army!

[@chimmy4244]

That's great! You guys are doin a job in town and passing saws around and having fun hootin and hollerin!! Cool video. Have a nice day

[@Zebracat5]

The 500i sounds like a power House. It has my attention. I don't hear a hic up anymore. Great Video Buckin. Wish I had an Axe like that.

[@towertrash978]

"Stihl" holdin' on to the 461's. I've fell, bucked and blown up a few. Still love em. The 462s and the 500s have just felt too damn "squishy" I've yet to try one with the after market motor mounts so I can't rightly disapprove. As far as the Bark Box goes... well, absolute must have. West coast is killing it with them things. Buckin' has sparked hope in me for the 500i for sure. I'm just not sure if it's just his "contagious positivity" or not. Take care Buckin'. You're a damn legend.

[@longlowdog]

Modern Scandi' saws are made with a firm sight on complying with hand-arm vibration figures hence the squishiness. You wouldn't believe the lengths European employers have to go to to comply with regulations. However, the way the 500i is set up the daily exposure limits are similar to a saw two cc classes lower.

[@towertrash978]

@@longlowdog I understand why they're squishy. It just doesn't work for cutting in the Pacific Northwest. I don't care about vibration. It's a great saw. I just want to run it with the stiffened up 661 mounts I've heard you can use.

[@discoverykai1547]

Your creativity and innovation are truly inspiring.

[@sergipadrosaguilera]

I have had the 500 i since 1 year ago, and it is fantastic, the power to weight ratio is the best, if someone is thinking of buying a new one, with similar characteristics, I recommend it, it is money well spent

[@darrellhoekstra8514]

Great message at the end. Love the optimism and the call to invest in yourself and others going forward. Future is bright when we realize we're all in this together and put our collective arms around eachother and shoulders to the wheel. Thanks man!

[@discoverykai1547]

You're a natural problem solver and always find a way to make things work.

[@discoverykai1547]

Your ability to stay calm and composed in stressful situations is truly impressive.

[@fivestring4653]

As a track hoe operator been laying pipe for over 20 years , I see a good operator handling them logs . It takes confidence and skill to grapple a log while the man is in the process of cutting a tree like that . 👍🇺🇲🪕 . Great job

[@discoverykai1547]

You have a genuine and infectious love for life.

[@scotthendricks6652]

I have been waiting for this since I found out you were getting this saw. Love it when you're on the drums.

[@noelatieh]

Good job the yellow saw beautiful

[@mitzisession1174]

buckin i love saws and axes like you do i use them everyday,and that wood bullet is by far the best ax ive ever seen great job buddy

[@jodelboy]

I had to get out of bed as soon as I saw the title. I'm not a professional arborist (yet) but I got myself a 500i a few months ago (here in Europe they're available "over the counter" :D). it's brutal. absolutely aggressive acceleration. most of the times starts on the 2nd pull (from stone dead), never had more than three pulls though (not even the first start!). the only downside is the filter system. you have to fabricobble something together to keep it chip-tight because in stock form it isn't quite - there are two openings to the filter where chips/dust can get in, one is the main opening (which is tight) and the other is the one that the cam engages the cover.

[@jirusjirus9322]

Good to know... Thank you for your observations

[@jodelboy]

@@jirusjirus9322 no worries. I fixed mine by adding a rubber "washer" over the filter-housing-cover cam-nipple where it locks on (by cutting a piece of bicycle inner-tube to size). it's definitly tight now, not letting any particles through. did the same around the "main" hole in the filter, just a ring of rubber around the housing fixed it completely. also, now the cam locks on more positively (not hotdog-down-the-hallway-style like stock)

[@dragonspicks]

Wow that was wild. You had the whole gang there. I loved the humor in the beginning. Well done

[@slimgrowden]

That my friend Gorty he owns West-cost saw shop out of Washington! I have the same muffler on my ported 661 he does great work my saw now from what it was stock is unbelievable! The thing feels like it could pull down a house! Definitely highly recommend him for anyone that needs saw work! Great video Buckin that new 500i is something incredible!👊🏻

[@mistermatt9056]

Great video, I'm glad to see Buckin' using a Stihl!!

[@charlesreid2141]

Excellent channel. You have a way of talking to your viewers that is genuine and extremely informative. I am subscribing because I believe I will be entertained and informed along the way. As someone who considered bragging about moving from a 16 to an 18 inch Stihl I now will just keep my big mouth shut. Thanks again

[@discoverykai1547]

You have a remarkable ability to work well under pressure.

[@KillingerUSA]

That Stihl looks good on you Buckin!

[@kwspreu]

Thanks for the video and your thumbs up on the Bark Box. I've had my 500i for a couple of weeks, waited 2 years, and really like the weight and manueverability. You sold me the muffler mod. Still waiting for the rings to "seat in"!!! 🤣

[@Solvang_circus]

Even when I’m at the hospital getting stitches(from my knife while opening a new bar lol) watching billy always puts me in a better mood :-) stay safe friends

[@discoverykai1547]

Your ability to inspire and motivate others to achieve their goals is truly impressive.

[@discoverykai1547]

You have a natural ability to connect with people and make them feel valued.

[@Dumperdriver1]

had one 18 months. absolutely awesome. use it all day almost every day. needs modification on lightweight bar to enable more oil, chain stretches early before adjustment is at max . other than that its awesome

[@discoverykai1547]

Your creativity and imagination are boundless.

[@kylehodges6308]

This was a lot of fun buckin. Felt like i was there. Big freakin wood buckin party. Thank you.

[@timothysullivan4130]

Just bought a 500i AWESOME saw! I highly recommend it if you fell for a living ☝️

[@technosamurai9825]

Been waiting for this review. Thumbs up, tune in. Happy days. Thank you Buckin'.

[@cheapsmoke4096]

i love rewatching this episode , its awesome

[@jagcustomknives]

When mine wouldn't rev after starting like that, it was my decompression valve. I also notice more power after about 5 big cuts when everything is right hot. I also believe there is a rich fuel map that runs for the firt 10 hours to allow cooler break in temperatures and then the factory reverts to standard tuning.

[@discoverykai1547]

Your kindness, compassion, and generosity are truly unparalleled.

[@discoverykai1547]

You have a contagious energy that makes everyone around you feel more alive.

[@JSomerled]

Good to hear the 500 gets a thumbs up..Gives me confidence to buy one..not cheap..

[@mattwarner5071]

Best saw I ever bought hands down

[@MrCreateNothing]

Had to bring my 460 in today, I had a little problem I couldn't figger on it. Decided while I was there to get the 500, they sold the last one earlier in the morning. They have 5 on order, I'll be the first they call when they come in. I cut big Euc with my 090 and 880, love your vids brother.

[@rodanielsut]

Oh. My. Goodness. You pulled out that knife... and the text on screen said, "I'm going to be nice to people today." I laughed so hard.

[@toantoan4699]

a1qq

[@faithfulfollowersofchristn7179]

Me too. I sent it to my coworkers

[@threadtapwhisperer5136]

Beautiful knife, was that some sort of stone or damascus style steel? Makes no mind anyway, beautiful.

[@warrenvigil5708]

I'm a husqvarna guy but that 500i actually sounds good and cuts awesome

[@NickPixelTV]

Ready for this series ❤️ love this community

[@thehealedheartspace]

We love you back💪❤👍 This is gonna be awesome!!

[@FectoReviews]

Thanks for helping make this happen with the saw Nick! 👍👌👊😎

[@NickPixelTV]

@@FectoReviews thank you! friendships made here are a blessing. Im just happy to help where i can to make a difference. It will be fun to do some filming once travel opens up.

[@FectoReviews]

@@NickPixelTV You bet! Couldn’t agree more. I’ll be watching along the way.

[@ScrewdriverTUNING]

What did he say. ITS GOING TO BE A GREAT YEAR 💪🏻💪🏻 thank you for starting us off rite my friend. Kindness and love

[@nathanmunro-donohue4330]

Holy moly that 500i cuts nice!

[@bucketofguts]

Getting her done as always. Hell...... give everybody a camera, and fly a drone. Put some drum rolls it there, maybe some cow bell. Mix it up a little Bucking. That camera in this on is good when that hinge broke. I could almost smell it. Very good!..

[@btrnsfrmr]

definitely needs more cowbell...

[@Xboxmurphytubbbs500]

That 500i runs like a dream compared to the older carb saws that's insane bro. I've ran a bunch of different saws. And that thing looks like it beats everything

[@discoverykai1547]

Your passion for your work and commitment to excellence are truly inspiring.

[@discoverykai1547]

You have a keen eye for detail and a knack for getting things done right.

[@JoeRainis156]

Been patiently and of course “Kindly” waiting for this 500i nicpixel edition

[@1stFlyingeagle]

Old and still beautiful. Man the sound was wonderful.

[@discoverykai1547]

You have a gift for motivating others to be their best selves.

[@richard_ross.photography]

Love the 500i! I've always been a Husqy man, but a good friend and collegue of mine, said I should try his 500i out. So I did. That was the most expencive thing I did that day! I ended up going down to my local saw shop and buying one and a 32'' bar with it! Love your videos Billy! Keep up the good work! A fellow B.C. wood man, living in Denmark, Richard

[@discoverykai1547]

Your intelligence and quick wit are truly impressive.

[@longy6612]

I got to use my 500 for the first time yesterday and i was amazed with it, the rooster tail of saw chips it throwing was amazing 👍👍👍

[@discoverykai1547]

You have a remarkable ability to connect with people from all walks of life.

[@shapeshifter7753]

Bunch of men getting lit over their passions😁 🔥

[@shapeshifter7753]

Jeff Wilk bah hahaha😅 good to hear from ya! Masonary, is that your line of work?

[@shapeshifter7753]

Jeff, Thats a tough job. I hope you were able to stay grateful?🙂

[@shapeshifter7753]

Right on Jeff Wilk! Giver! Honestly and self awareness freind😃 started my day feeling grateful gonna keep riding that wave. It was seeing your message that set me straight😌 thanks for you👍

[@dr.feelgood2358]

16:40 that was epic!

[@gijshoogteijling8727]

Hay buckin. I run the 500i for 2 years it a monster saw but I have a lot of problems with a lot of part from the saw every week if I have a broken part most of the time it's the brake claw. I can feel that the saw is light built but the parts are also ligt and not strong built.

[@jamiedalluge9472]

Sure dnt feel as solid as the older stihls does it?

[@edgerat]

you'd be one of the rare ones with issues. Madsen's has sold hundreds so far, no issues. I know they were out in Europe for a long time and they were working out the bugs, maybe what you have?? Cheers :)

[@DanielAtkinsFirewood]

Not to put any one down.. Can't make everyone happy however I am the kind of guy to listen and take notes.. Sthil fan. Maybe I missed it but is it dumb little stuff braking or more important stuff like harder parts. As buckin was saying the casings may not hold up as long ext. Dumb stuff that brakes to me is stuff the saw could run (maybe not for long) with out like plastic covers ext.. I am an automotive geared kind of guy so,again if I am missing something please forgive me.. I do have a 2 Sthil saws (MS 311 & MS 461) and both have there uses.

[@ishure8849]

G'day Stihl fan what part of the world are you in that's the question?

[@seaturkey5608]

I've seen 3 brake handles go in about the same spot on different saws. Maybe the weak link but disengage it by hand or with a scrench and you're good to go, just remembered you only have an inertia break at that point

[@gavincardwell2223]

Finally a stihl in them hands! I love it! Been running stihl saws with my dad forever that's how I learned to cut with my dads stihl

[@stevetheriault4164]

THANKS NICK PIXEL FOR GIVING THE OPERTUNITY FOR BUCKIN TO SHOW US THIS SAW AND CONTENT THANKS BUCKIN THIS IS AWESOME ,MAYBE ONCE YOUR 371 BREAKS IN AND GET THE 500 SIDE BY SIDE COMPARISON THANKS BUDDY BE SAFE AND EVERYONE HAVE A GREAT DAY

[@theironhorse6600]

I wanna see that also!

[@stevetheriault4164]

@@theironhorse6600 YOU BUILD ONE HECK OF A SAW BUDDY THAT 371 WITH THAT EXHAUST COMBO SOUNDS WICKED GREAT JOB HARVEY HAVE A GREAT DAY BUDDY HOPE YOUR FEELING BETTER MY FRIEND

[@jerrygarcia6917]

The MAN takes pride in his work! Nice to see.

[@francobonofiglio1258]

I love how you're inspiring people to go and be kind and with the GRACE OF GOD will get past this

[@Comp670]

I LOVE the Bark Box from WCS. They are super people/family owned company and its a QUALITY product. I run them on all my Stihls.

[@hogansmith7075]

for your information mr billy i did manage to start that kart saw lol however i did almost dislocated my shoulder in the process

[@WoolysWorld]

Lol

[@davidewart1541]

Have you had a shot of the 500i yet. I'm waiting for one that I won in a competition last week. Going to put a bark box on it for sure. The leadburn logger Scotland.

[@jirusjirus9322]

Yea... Throwing down the caution flag on some of those high compression saws...a dislocated shoulder is no fun, it's easy to do when your muscles get stronger than your brain.. 😊

[@shapeshifter7753]

Hey Hogan! Nice to see you in the comments👍 don’t tell Buckin but I think your dolmar is the fastest cutter 😁 ever have any issues with it?

[@pauegeskovchristensen5644]

Felt like you were speaking directly to me. I just started my own business 6 weeks ago. I just directly love you man. As inspiring, loving and dedicated to the game, and at the same time caring about others then yourself. Oh man. You can teach a lot of stuff threw this channel

[@LUckybones25]

Get a room bruh. 😂

[@discoverykai1547]

You have a genuine passion for your work that is truly infectious.

[@willhallman8280]

27:58 hogan with the “that’s what she said” 😂😂

[@bucketofguts]

I need head phones.............................Good catch, sweet!

[@bakedandsteaked]

I like how he hesitated lol

[@spencermcginty9812]

Gordy makes a great product for sure! Thanks for sharing that with us buckin, love to you and the family❤️

[@discoverykai1547]

Your ability to think critically and solve complex problems is truly impressive.

[@Back40Firewood]

Wowzer, wowzer Woooooooo!! Been waitin to see you run that saw Buckin and hear your thoughts! 😃👍💪

[@DanielAtkinsFirewood]

Same here.. Almost should have waited to get one.. But I am happy with my 461..

[@Mikethemidwestmarine]

Dear Buckin, thank for you all the work that you put into your content. I think that this is one of my favorite videos that you have made. And yes I'm a stihl guy as well, but I do like seeing the old school saws as well. God Bless, keep cutting and Semper Fi my friend.

[@BuckinBillyRaySmith]

welcome

[@discoverykai1547]

Your intelligence and knowledge are awe-inspiring.

[@discoverykai1547]

Your intelligence and knowledge are awe-inspiring.

[@mikeadams9337]

Been waiting for this video, glad to finally see it.

[@mikekuchinski5429]

Love the 500i had mine a couple of months now getting stronger every tank

[@TheFullyChargedGardener]

Awesome video - I love my 500i . I am by no means a pro like you - but I love the saw. Really looking forward to all the things that are coming to the channel. Thank you for the video.

[@ronniejordan524]

I want one but I'm disabled oh how I wish I could afford one

[@ronniejordan524]

I've been using a 55 super wiz homelite bow saw the 500 looks a lot faster and safer to me

[@discoverykai1547]

You have a natural ability to connect with people and make them feel valued.

[@thesmallwoodlot433]

Stihl playing around with power saws, well so do I. Keep it up!

[@johnbolwell5969]

Pleased to hear your thoughts Billy. I run a 500i with just a 25" bar and love it's power to weight ratio.

[@discoverykai1547]

You have a gift for motivating others to be their best selves.

[@discoverykai1547]

Your dedication to your work is truly impressive.

[@klecoxs2]

Really enjoyed this video for the info and just as much to see everyone having fun and getting along , great stuff keep em comin.

[@user-gz4vb2rf5c]

"I'm going to be nice to people today" He says with a knife in hand 🤣😂

[@ferrallderrall6588]

A letter and hard wrapped plastic opener lol

[@user-gz4vb2rf5c]

@@ferrallderrall6588 hahaha love it!!!

[@nikitaspy]

Complimenti, non ho mai visto un boscaiolo lavorare contento come lo fai tu. Bravo

[@CNKCLAN2]

Love to see Buckin' smiling while running a Stihl for a change! Maybe we got him hooked with this one. That saw is wicked, it was falling through the wood. Wow!

[@coreyfrasnelly7364]

I’ve run em all and I’ll take a stihl up here cutting big Appalachian hardwood 👍🏻

[@discoverykai1547]

Your passion for your work is truly infectious.

[@peterfish8619]

Ok Buckin now you've got me - been watching for months and months now - always awesome - but the way you flicked the saw at 15.55 like it was a feather into the start of that 1st PURRfect 1 1/2" round wow buddy WOW.

[@Andyshine77]

I knew you'd like the 500i. She sounds a little warmed up for sure, but they still cut really nice stock.

[@BuckinBillyRaySmith]

its stock brother other than the muf

[@Andyshine77]

@@BuckinBillyRaySmith Runs good 👍

[@ronluker3781]

I just got husky 372 it’s so great used the all the knowledge I get off these videos to land trees and everything else great videos