Buckner/Royal coach 10101 1.25" popup impact rotor

[@photocontrol]

The 10101 also runs great and has nice coverage with 2 pumps.

[@randyvanheusden732]

I am surprised with the pressure you have that the spring is so tight and the arm swing is short. I also might have expected it to be faster, but I guess not this one. Thank you for sharing it.

[@NelsonBigGunP200Fan]

I believe the rotor is NOS. I have not messed with the spring or anything. I have ran it as I got it. I think the pressure makes the arm move fast.

[@NelsonBigGunP200Fan]

I ran it again for a friend and it seemed like the drive nozzle is clogged with something. It was moving VERY slow and getting stuck in reverse.. The drive arm was not moving very well.. I may have to take the cover off and remove the nozzles to check them. I should probably anyway. I also have a IB120 Buckner that does the same and the stream from the drive nozzle seems thick and obstructed. The issue with that is the retract spring on the popup is VERY strong and i cannot get it popped up enough to remove the drive nozzle. I may have to remove it from the casing and clean it. We'll see. One day I'll get bored and pull them and clean them out and run them again hoping for better results.