BUDGET 4.6 2V BUILD PART 2 - BOTTOM END REBUILD

#ford #modular #piswap #2v
300 HP BUDGET 4.6 2 VALVE - New Rings New Bearings New Gaskets
There is a couple of tips, tricks and secrets that the trolls don't want you to know
Here is 2 great videos from HorsePlay Motoring:
• How to Disassemble a 4...
• Rebuilding a 4.6 Oil c...
go check out his channel and subscribe for more of his content

[@RaceGasSmellsGood]

Love the Two-valve content! Wew! Looking forward to watching this come together!

[@streetslayers410]

Awesome man. Glad you're enjoying it. Im just trying to help some people out

[@crownvictorialifestyle4421]

@@streetslayers410 I would never get the book that you offered in your video get the Ford manual that is way thicker and it has way more information than those knockoff manuals will ever have

[@crownvictorialifestyle4421]

@@streetslayers410 I also have a cobra crank with a 2009 crown Victoria iron block and there's no need to clearance anyting I truly don't know where that information is coming from

[@streetslayers410]

@crownvictorialifestyle4421 in 2009 the blocks were cast different. If you put a Cobra crank in an iron block cast previous of 03 you have to clearance the block. That isn't uncommon information.

[@4vchuckles108]

Great video brother! People laugh about using the old chiltons or Hanes manuals but they are worth there weight in gold👍

[@streetslayers410]

I agree! Thanks for checking in brother

[@carmob7499]

Agreed !!

[@carmob7499]

Brother you be dropping that Knowledge Bomb . cool video !!

[@streetslayers410]

Just trying to help out the new comers

[@Dustinscustoms]

Great channel definitely a help for all the 2v out there

[@streetslayers410]

Thanks man

[@streetslayers410]

Trying to get good information out to the next guy.

[@NorthernMustangs]

Great detail man 👍

[@streetslayers410]

Thank you!!

[@jk_navyko9006]

I have completed my 4.6, it runs great now.

[@southoripper]

I just found your channel and I'm stoked! Got a sky blue '96 bird and I'm planning on (eventually) pulling the motor to do the head swap and other stuff.. Great tip about purchasing a manual I'll do that. Keep it up, looking forward to the rest of the build!

[@streetslayers410]

Nice! Thanks for checking out the channel. If you have any questions feel free to hit me up on here or on Instagram @street.slayers_410

[@20stands]

Deburing the block will reduces points whereas it's likely to cracks throughout the block. I've done this a few times and it takes about an hour, cleaning the block takes even longer and if you think it's clean double check. I've found specs of metal after I thought it was clean.

[@streetslayers410]

👍🤙

[@justinm6110]

I remember back before the internet everyone had a Chilton book or needed to borrow one,

[@streetslayers410]

Unfortunately you can't believe everything on the internet

[@porschetech72901]

i dont miss those days honestly

[@StupidFastTruck]

Good info with no BS!!

[@streetslayers410]

Trying my best

[@autobez3132]

We appreciate the knowledge let’s go # 🚗 🚘

[@streetslayers410]

🙏

[@HoweDoYouDo1999]

The knowledge is necessary. For real, hehe.

[@frank3stangs]

Great video! I've only owned one 4.6, 97 thunderbird. Never worked on one but, the bottom end kinda goes together like a pushrod bottom end!

[@streetslayers410]

Very similar. These 4.6 engines are very simple

[@jamieyoung1338]

Glad I found this im about to start my first rebuild ever i have a 99 single cab with a 4.2 and swap out with a 4.6

[@streetslayers410]

Nice! If you have any questions you can hit me up on here or Instagram

[@bbq5.0]

Alot of information thanks buddy

[@streetslayers410]

No problem man! Thanks for checking in

[@TheModAddict]

Loving this content

[@streetslayers410]

I am here for your viewing pleasure 😂 im glad im able to do this and help get some information out there

[@DiablitoSpeedz]

Nice man! Sweet content

[@streetslayers410]

Thanks man

[@canadianmarauder1923]

I like what ur doin! I think people say 6 bolt main cause some blocks have 6 bolts holding each main journal. My 2003 aluminum wap block is like this. It has 4 bolts in each main and 2 cross bolts. So 6 bolts in each main crank journal

[@streetslayers410]

Yes! The aluminum blocks are 6 bolt mains and the cast iron blocks are 4 bolt mains. Just to clarify, some people claim that the 03-04 cobra cast iron blocks are 6 bolt mains. Sorry for the confusion. I appreciate you checking in 🤙

[@canadianmarauder1923]

@@streetslayers410 ok I see. I assumed the cobra block is 6 bolt. So then I wonder if my 08 5.4 3v is a a 4 bolt?

[@streetslayers410]

@@canadianmarauder1923 I rebuilt an 07 gt500 and it had dowel pins where the outside of the main caps. So basically it had the 2 cross bolts, 2 dowel pins, 2 bolts next to the crank.

[@TACOMASRT5]

Thanks for your videos! I'm working on a non pi 4.6 now. Gen 2 cyote rods, New pistons, New rings gapped for boost, PI heads, Think a gt45 and 10-14 psi should be ok?

[@2valvegt673]

I use chilton and haynes books just for the specs. Great source of info

[@streetslayers410]

Amen!

[@2valvegt673]

@@streetslayers410 i have a teksid block that i have considered putting npi pistons in with pi heads and cams for my 98

[@streetslayers410]

@@2valvegt673 you'll notice that 100lbs weight reduction immediately.

[@kamijoon4788]

Geart Video!!! Thanks for sharing. I have a 2001 4.6 2 valve, that has a broken Rod. Should I have it rebuilt or get a remanufactured one ? I sure appreciate your thoughts...

[@thedobermangang3503]

good video my brother ,,i got 2004 maruader 112,000 miles on it..eventually im gonna have do my engine it has that rattle sound only when u frist start it up for about few seconds then it goes away..maybe timming chain tensioner latting the chain slap to the oil fill them or hydraullio cylinder in the tensionerare alittle worn

[@streetslayers410]

If it goes away after a few seconds, most likely it is the lash adjusters. They are pretty easy to change.

[@porschetech72901]

the plastic baggie the rear main seal may come in works well for install as well

[@streetslayers410]

Nice!

[@kewil1419]

If you like to tinker then fix that buzzing light above your head.

[@johnwilliams6407]

Very good work need your help. What's the best compression for everyday drive on a 5.4L F150 for economy and power?

[@streetslayers410]

9.0:1

[@bobwarnke5746]

I have a 2000 PI engine, what is a good source for NPI pistons. Thanks Bob

[@michaelwalker4799]

I SEE YOU ARE FAMILAR with these engines i will send you a couple of pics on the build tips not that i am smarter just blessed with a fine mentor and a new one after thirty years i am building a 2v now could ck

[@streetslayers410]

👍

[@jdogncars4819]

I just done a picked swap on a 96 gt had coolant crossover trouble with ford race8ng intake

[@streetslayers410]

Cut the plastic intake away and bolt the crossover straight to the head

[@chrisandersonlv]

I just found your channel and I’m so glad I did. I have a 07 4.6 3v that spun a bearing and ate the journal on the crank up. Motors super young only has 50k on it and the internals look good other than that so I don’t want to have to replace everything and your literally the only person I’ve been able to find that shows how you save what’s not broken! The crankshaft gore imgur.com/gallery/VlhXmei

[@streetslayers410]

Thanks for checking my channel out. That sucks about the bearing. Are you planning to get a new crank? or get that one machined?

[@lawrencejacob8]

My 1998 f150 2v knock/ rattles on first start up cold but goes away what could it be ?

[@charlesdixon1804]

Great video and information. Question how much a difference in the Gt crank 4.6 2v and Cobra crank 4.6 4v. Can a Gt 4.6 2v crank hold 500 hp as a daily driver 🤔

[@streetslayers410]

A stock gt crank will handle anything you can throw at it except for really high rpms.

[@M.ruiz902]

What kit did you use for the piston, rods and rings? Plan on doing a budget rebuild and need new rings

[@streetslayers410]

Sealed power for the piston rings. Everything else is just cheap ebay stuff

[@curtisgore1611]

Where did you get the ho oil pump

[@HoweDoYouDo1999]

Funny how Ive been watching the bottom end tear down videos. While getting no where near an engine. 😂

[@streetslayers410]

I watch fitness channels while eating nachos.... 😂

[@dajengreen8862]

Aye man I have a question so I just finished rebuilding my 4.6 mustang and besides one lil problem it all went very well and I was hoping you have the time to help me figure out this problem and that is when the vehicle gets to operating temperature it stalls out at idle, so I replaced the IAC VALVE but once I put the new IAC VALVE in now it just stalls out once I start it. I know the vehicle is timed correctly so I don't think that's the issue maybe you might be able to send me in the correct direction

[@streetslayers410]

Throttle position sensor

[@coyotecarguy2076]

First! Hahahaha!

[@carmob7499]

damn you lol

[@streetslayers410]

😂😂😂

[@coyotecarguy2076]

@@carmob7499. . . Gotta be Quick Brotha!! Gotta Be Quick!!

[@coyotecarguy2076]

@@streetslayers410 👍👍👍

[@StupidFastTruck]

@@carmob7499 You can't beat Al, no matter how hard you try...LOL

[@mikelongsta5699]

Hey bub if you flip the head around won't the intake ports be backwards?

[@streetslayers410]

Nope

[@bigretardhalo]

They deburr it for the weight reduction 😉😂

[@streetslayers410]

Weight reduction by the gram

[@bigretardhalo]

Gotta get that 9.999 somehow 😂

[@streetslayers410]

@@bigretardhalo 😂😂😂

[@DragRacerVideo]

It's not enough weight to matter bro,they deburr on anything so there is less potential for stress cracks.all the little burrs are from the casting it was made in and removed.so grinding them smooth eliminates tiny cracks in the burrs,leading to a far stronger piece .with better structural integrity ! So it is always worth your time...

[@kb01663]

One thing I can't believe is the Chilton manual couldn't even tell me what fluid to put my transmission, just had to trust the internet

[@streetslayers410]

Sheesh!

[@BrailsfordsRides]

Want to build my Grand Marquis 2v? 😄

[@streetslayers410]

Bring it on over!

[@BrailsfordsRides]

@@streetslayers410 there is actually a guy near me with a coyote swapped crown vic im dying to review

[@streetslayers410]

@@BrailsfordsRides one day...one day...a coyote swapped crown vic is my unicorn. I will have one

[@jerrycochran2659]

How do I know if I have a 2v ? I have an 03 Ford Expedition 4.6

[@sategllib2191]

That's the last year of the 2v for the expedition. You can tell by the intake and valve cover shape pretty easily. 2v valve covers are rectangular looking and 3v covers have rounded shapes along the bottom

[@demetriushuitt9855]

Were are you located I have a 2v in desperate need of a rebuild

[@streetslayers410]

Baltimore

[@TACOMASRT5]

What electric water pump is that

[@streetslayers410]

Did you see it stashed somewhere? Because I haven't installed it yet lol but I have a Meziere

[@michaelwalker4799]

love the fat guy in his underwear and true these modulars are not like a sbc

[@streetslayers410]

😂😂😂

[@jerrycochran2659]

What did it cost to rebuild ?

[@streetslayers410]

About $500 with machine work