Budget B series Build / Cleaning up the Engine Bay

[@MrGuvEuroman]

Boost the pressure washer.

[@fbffortysix]

wtf i didn t think of that lol

[@MrJohnv8386]

You can have it run off of methanol

[@jorgevale4542]

😏

[@ed4787]

and daily it.

[@dvulpis29]

Slam the turtle

[@cameronmyers8382]

The reason it came out so good is because he knows how to paint! I was surprised watching his technique because it wasn’t bad at all! I bet he can paint with a paint gun and it would come out amazing!

[@BradGryphonn]

Yep, move, spray, stop. Move, spray, stop. Never hit that rattle can button unless you're moving.

[@dstolarc]

That part was good but they kept touching the surface to be painted with their bare hands! That is a HUGE No No to anyone that knows Anything about painting. The oils from your hands won't allow the paint to stick properly. I kept cringing while watching the video :-(

[@dropinbiking92]

Painting with a gun is so much easier than with rattle cans. Also, nothing worse than a rattle can that starts spitting and sputtering while you're trying to use it.

[@dylaneagleton3090]

The rabbit taking off 😂😂😂👌🏻

[@JaredHIll13]

Throttle rc4 i about died laughing 👍👍

[@lbedwin25]

Throttle rc4 literally laughed out loud #blowingcoveratwork 😓

[@dominator5050]

Throttle rc4 he almost made 7 pounds of boost

[@chrisyarber3352]

Fr lmao

[@HH-re3dk]

Definitely tidy up the hatch next and get a cage put in

[@cameronmyers8382]

harley haywood atleast a damn cage lol

[@JordanJank]

No cage is the point

[@SingleCabCrew]

Crash bar is what it needs, only thing keeping him safe is the motor and the flimsy radiator support

[@HH-re3dk]

Jays Performance the intercooler is there that's why he had to take it off

[@SingleCabCrew]

harley haywood you make it seem like all the drift guys don't have intercoolers with a crash bar

[@ChristianGrytten]

uploads on point. perfect timing for lunch hours in europe!

[@206guy7]

Christian Grytten in Europe lol, it's 4am in America i was trying to sleep lol

[@leeuwarden2161]

Exactly😂😂

[@mdnborg]

K20 rabbit

[@xalr6128]

Na as fuck bro 400 horse

[@moretrash4you]

Electric. Just keeps going and going.

[@eddydevillelowks9499]

K24 block and a k20a head hahah

[@TimBigBendFishing]

Jeremy's new name.... Mr. Clean Glad to have some OCD on this channel

[@RyanTheMalamute]

Content has gotten exponentially better since the first of the year. Tossing in some jokes like the rabbit, and a little bit of game. Liking it a lot.

[@JustGeminis]

Im loving the Whiteout Civic Build... Jeremy is a switched on fella who pays close attention to detail and hopefully this will be the start of cleaning up the other builds and buttoning up all those loose ends.. Great to hear you have been invited into the you tuber battle Kyle and Jeremy .

[@p_gt3276]

A have a nasty fever and I am missing one of my favorite camping trips of the year, this vid just made my day. Thanks!

[@1theheightofparadise]

my high ass thought someone started doing a burnout and scared the rabbit lol

[@lilej8996]

Jonathan Lavigne same 😂

[@chrisyarber3352]

😂😂

[@98snakehorse]

If this doesnt make it to the street car challenge I will be severely disappointed..... I mean that will really boost this channel!

[@kevinjohnson1958]

I'm happy the van is gonna be finished, it's the ultimate sleeper. Brent said you had missing cotter pins somewhere too.

[@DashnCars]

In next weeks episode: Trouser v Rabbit

[@chrisprice6891]

Before I did my full brake line tuck I took the prop valve with all the lines connected to it and bent it down and mounted it to the subframe. Just an idea cuz I know you didn't want to get into tucking anything. Keep the videos coming guys🔥

[@Spangarangg]

I'm a BMW M and Mercedes AMG person but I LOVE this clean Honda build!

[@BirkinIdk]

really like the direction of the channel. this new dude is pretty chill n seems like he actually helps u a lot with vids!

[@yoshi98154]

Man it's cool to see you guys in my home town of loveland seeing you guys rip around loch lon a couple years ago to now watching every video you put out!

[@anthony1129]

Boosted homie is a prodigy. He gonna go down in the boost hall of fame some day.

[@ReyCha96]

This is by far my favorite channel.

[@chronic3100]

This guy you got with ya now I think is finally gonna get you to clean up your cars! Would love to see the hatch clean and with fresh paint!

[@DashDrones]

Noooooo, it's been three days and no new uploads. serious boostedboiz withdrawals

[@MrBe3anLovesMKW]

Jeremy is really a good addition to the channel.

[@boostedcoupe3786]

Coupe is looking really good. Cant wait to see her make power!!!!

[@andrewturner9520]

VTEC rabbit

[@butteredtoast855]

No decals. Looks clean...

[@evoTimer]

That would be a fast VW

[@vatic7691]

+evoTimer huh??

[@butteredtoast855]

VW Rabbit is a car

[@cuhnetwork6129]

Kyle you should use your Twitter more often! Lmaooo that bunny part had me cracking up

[@callumsmith338]

just a quick tip, when using a rip cord (pull start) find the point of compression (the point of hardness) then pull, prevents jolted shoulders

[@NeatSix]

One trick I found for places that get really cold, about 30 odd minutes before spraying with a can, put the whole can in some hot (not boiling) water or in front of a heater but not too close, that helps stop it spattering since the cold paint gums up the nozzle of the can, and allows it to spray nice and evenly. Plus the can will be warm to hold aswell.

[@john-rm2bm]

Yes let’s see the mini van at the car challenge! Have been watching since that start before 20k subs. Also been watching robs videos will be awesome

[@dirtyjandthecrew9704]

love how he put that clip of the grommet going back in in response to the comments about his car starting on fire

[@kindbud]

Drag radials on the mini van, sick!

[@winchracing64]

If you do the hatch use bulldog adhesion promoter before the primer, it's hard to scotch bright the surface so the promoter will help it stick.

[@MrLendermanGaming]

My god the sound effects when the rabbit ran off. Had me dying man. Love a boostedbois vid after work.

[@keananjordan8259]

Yea get it ready it would be awesome to see the van in action

[@projectcarsmodz1775]

The engine bay though!!! this is going to be a really sick build, I can tell already!!

[@richardfox2996]

@boostedboiz its nice to see someone who knows how to spray with a can

[@discohcr2517]

Glad to see how easy it is to clean up and paint a bay like that 👍 if ever I need to pull my b18 out will be doing this fosho.

[@Living_Lodka]

Who would win ? One crusty engine bay or one boosted boiz

[@HGChannel2020]

ay notif squad. When are u guys getting tyres for the minivan?

[@sugarbombs6884]

RB26 likeaboss they, are never ever eveerrrr, get tyres for the minivan

[@DashDrones]

Awesome work and thanks for the upload as usual. The 9 day countdown begins, cannot wait!!!!!

[@mrlithium69]

Whoaaaa cool turtles :) I had one for 15 years. They get so excited for the food.

[@Doggepp]

You should probably change the wheel bearings also, doing a 2 day roadtrip (and then 2 days back) - half mile pulls etc. I would change them as a part of precautionary maintenace

[@serr38]

Holy shit...half mile in the VAN! Can't wait.

[@chantzcalhoun3433]

I cant say ive been here since the beginning, but im more or less OG to this channel. When i see the boiz, i click. ALTHOUGH, i think i speak for everyone when i say, you should do more of a daily life vlog type video. 'Episode of cribs, boosted addition.' Id like to meet you guys in person, but im in Oregon across the U.S. lol gud 2 c u yung killaz stil brack3n doe stay poed up.

[@JuniorsVlogs24]

Was gunna go to sleep but boostedboiz uploaded. Hells yea!!!

[@mason8725]

A tip for masking, specially wiring or hoses,,,, use tin foil, so much faster and better than tape :)

[@ManMrKrazy]

Lmao even the rabbits are boosted.

[@jutzufaze8988]

ManMrKrazy shitt how many hp that shit boosted 😂😂😂800+

[@jake-the-peg]

Minivan Needs a big set of slicks up front with hubcaps zip tied to the wheels to keep it sleeper

[@Johan84]

You guys need to paint the inside of the garage!

[@itsallac0nspiracy]

Johan Jonsson I always think that too lol. If Jeremy's influence means Kyle start doing a tidy job, who knows!

[@typedrew]

gtfo

[@joeyg29jgjg]

Johan Jonsson no spend all the money's on car parts!

[@SingleCabCrew]

Johan Jonsson a lot of garages are like that in Colorado specially with all the new houses too

[@Joe-tt3fg]

Who gives a shit what color or posters u have in ur garage...

[@mikey_gc8]

Brent has EVERYTHING

[@typedrew]

Boostedboiz road trip. Roadboiz? Boostedkill? Dope.

[@tyben4653]

Brooo, you gotta do it. Get the van ready, it would be so legit!

[@ryanrich6398]

Ayyyye keep it up y'all Killin the videos!! Quality keeps getting better!!!

[@nestorlugo.]

Kyle if you plan on just changing two tires be sure to rotate the back tires to the front and remember ALWAYS NEW TIRES GO ON THE BACK! -It's Science

[@coryhernandez8143]

Kyle you have to get the van ready and down there I'm sure your dad Brent wouldn't mind helping you get down there!

[@victormillan4985]

God damn it I was about to sleep until I got the notification. Guess I'll stay up and watch it 😂

[@tomhaapaoja6807]

bro i cant wait to see the van slammed to the ground im really looking forward to the finished product on that mini van.

[@ChapaChapa13]

When the rabbit has more boost than your car :'(

[@DreadedDrums]

Yo this new guy is great.

[@DreadedDrums]

I know he's not super new, just forgot his name. But i wish he was my dad. same with kyle

[@dylang1486]

that d16a sure cleans engine bays good

[@chezrayrodney1480]

Boost the pit bike

[@Goodtimesbadluckv2]

they blow up too easily

[@kxlucifer]

Maxime Ly nope thats a dirt bike motor or something...pit bike motor are small and single speed

[@LSandL31]

If you can find them 245/50R-16 will squeeze on your wheels now. I did tires and wheels for a few tread and now a few different things you can do.

[@Zezims]

You guys are awesome, seriously

[@keonteconcepcion449]

Grab those radials from the shop that you test fitted back when tuning the van!

[@Korruptionen]

@BoostedBoiz Hey Kyle... you probably won't see this... but you should do a tour around the US in the minivan once it's solid. Car meet to car meet, city to city. I bet many fans would be happy to give you a couch to surf along the way.

[@gt1man931]

Yeah, you need some real suspension on that van. Keep rocking this shit. Love it.

[@danielmiranda8653]

You Know The Chanel Is interesting When You Watch Even Thoe You don't Have A Car

[@EdgarMartinez-pb6hs]

Kyle keep up the good work man 👌

[@QuickSiR]

You have to do the half mile man! What ever it takes!!!!

[@DeeJayAmuze]

i would love to see the hatch needs this kind of work done to it!

[@theilest33]

I missed out on the live upload I thought it’d be there when I got off

[@stevebarnette]

Hope you make it to the YT Challenge. Good luck, fellas. 💪🏻

[@nikolamaodus302]

Can’t wait to see this Civic finished

[@godofgaming7]

The new channel banner is sick!

[@pFbSpecV]

jeremy engine bay looks clean as hell!!!

[@STInkEYErex]

Looks good fellas! Definitely inspiring the prelude build!

[@DrivenFilmsPhotography]

Really does look good. Think i might try this soon for mine

[@BradGryphonn]

4:00 I used to have 2 snake-neck turtles in a six foot tank. Raised them from when they were as small as a silver dollar to when they were about 6 inches shell size. The female unfortunately died and we release the other into a pond we knew was full of fish.

[@Kmortisk]

I really hope you can make it to the event. Would be great content.

[@sanga187]

Banded steels with hubcaps on for the van get them as wide as you need then

[@cesarl3594]

Right before the video started I got an ad for Peter rabbit, man the Illuminati

[@revmatchtv]

You’ll do well in the half mile but get slaughtered on the track event! Can’t wait to see this!

[@MrLendermanGaming]

Bruh you gotta a boosted parts hauler now. We better see you driving this in the junkyard videos

[@razorsz195]

get some wheels the same size as the hubs and click the hubs on, i know someone in brents garage made a joke about it on some aftermarket rims that you could try. so its ultimate sleeper

[@hannesnilsstrom2613]

That rabbit had some nice takeoff sounds lol!

[@pokey4200]

Man you should find you a set of the mid 2000 model accord. Would look sick...

[@fazer12779]

Add a full throttle sequential gear shifter to the van :)

[@butteredtoast855]

Looking good keep up the stellar work.

[@tristenbauguss5664]

That civic is 🔥🔥 cant wait to see some power💪

[@Rsxnation0]

Boostedboiz almost to 300k hell yeah

[@olderrol1968]

Hey Kyle. I met you at import vs. Domestic in Maryland. I was asking you if you could do an exhaust manifold for me for my all motor H22 Civic. I'm still interested in you making one. Thinking about making that drive

[@Moma_Goose_Garage]

come on Kyle do it make that's kids day hahah

[@253Huhn253]

Ask Hayden

[@JeroldOnTheStreets]

Ask suicide crx he makes them and uploads to his website

[@LiLCheWY530]

Gayden

[@Jarph0821]

Buy a Whitefield. All motor design is important when you are going to spend over $500-800 $

[@3guysgarage]

Damn loving these updates!

[@aaronimpactnz]

Noticed the thumbnail and I knew it was a Honda because of the framing where the headlights go.

[@prestonsrc]

Sounds super unofficial. But hope you make it. Would be cool to see happen. Keep up the builds guys!

[@mikeneese5419]

pitbike sounds alot better now tbh Thanks jeremy

[@joshhall5643]

Can't believe he cleared that without a mask u guys are insane

[@hondaboidoogie982]

bro i sometimes would not watch the whole video but ill always hit that 👍

[@baxrok2.]

Great progress guys. Thanks!

[@jamesfacts5232]

Put the s14 rims on the van

[@lilturbojesus343]

james facts lol I think it is

[@deejayc3186]

That mini vans gonna kill’em!