Build a Basic Network - A Cisco Packet Tracer Tutorial

[@imprakrut]

Great explanation! Really helpful.

[@maxloreti7361]

I got headache mate, why fast forwarding ? is this video for learning purpose?

[@radostinzahariev2480]

Why did you fast forward through half the explanation? Your video has all the information but you made it so hard to get. I had to slow it down a million times.

[@nicolewachuka2184]

Thank you for the video. We used it in a group project and we got really good marks.

[@SonBlazer]

fast forwarded on the only part i was looking for

[@raghavbhatnagar8409]

this was really helpful thanks! couldn't understand a thing in class

[@mfonetukudo-iw2er]

Fast forwarded the key important Area I was waiting for

[@ariharasudhanm1413]

Thanks brother you clearly told the concept of using software... i am beginner so its very clear to understand the subject...thanks a lot.

[@benardotom]

7. Bank System Network Part 3: kzbin.info/www/bejne/hH2woqCXd9t3brM 6. Bank System Network Part 2: kzbin.info/www/bejne/qKW6iqaviZySZ8U 5. Bank System Network Part 1: kzbin.info/www/bejne/immpZnlvf9lrj80 4. Campus Network: kzbin.info/www/bejne/p3rFmZ6jiadrh5o 3. Hotel System Network: kzbin.info/www/bejne/iKipe4eAicpgha8 2. SOHO Network: kzbin.info/www/bejne/fJDHhKOXibKsq6M 1. Simple Networking Project: kzbin.info/www/bejne/immpZnlvf9lrj80 kzbin.info/www/bejne/fJDHhKOXibKsq6M

[@TheAverageTea]

great tutorial until you started fast-forwarding it and barely explaining anything. that was the important part but you didn't really let us know what you were doing.

[@ranjanadissanayaka5390]

Amazing video. Clearly explained.

[@mokodo_]

You need to use notes on this network, especially when giving tutorials.

[@eliasasefa0988]

best Great explanation! Really helpful.

[@safetime100]

Thanks a lot, please do more.

[@FayenMorval]

It didn't work for me. The PDU check failed. The packets bounce between the switches and computers and X"failed" at the routers.

[@abdulbasitimtiaz]

Same here

[@xCKZ12]

in a real world scenario what would the purpose of this be?

[@Ptaaaku]

I need to create network like this, but for 800 - 3000 host on each switch. I have only to change adresses?

[@Grinwa]

What if u want 5 subnetworks in the local network Is editing the mask the only thing to do

[@dozzl]

lots of help, thank you bhai!

[@mahendrakumarkannan9038]

I have created a Smart Home IoT network system in Cisco Packet Tracer. I want to know how to create an attack simulation model for the smart home IoT in Cisco Packet Tracer(CPT). Is it possible to do attacks and prevention simulation CPT. If possible how to do it and please provide me with some reference links or documents for it.

[@CO-wd3pc]

What is the physical topology ??

[@Snowpito14]

Hi, did you get a chance to know the topology of the network ???

[@nnenne4]

I know it might seem like it's repetative but please if you are doing a tutorial, take the time and do not speed through without explaining what you are doing. I could not understand this and I have been on it for hours. if you just did it at normal speed I would be done by now. The only reason I am watching this so often is because this is a homework assignment for me.

[@iluvBFMV07]

I have no idea what happened at the end, my network has not been able to speak to other IP addresses at all...the last few CLI commands also were stated as incomplete commands.

[@abdulbasitimtiaz]

Same here

[@sp3ckogaming831]

VERY helpful video brother

[@myat02]

Hello, thank you so much for this video. I learned a lot! I did all four networks, and all can ping internally, but only the top two can ping across to each other. Also, the top two networks can ping any of the routers, but can not ping the bottom two networks. The bottom two networks can ping internally, but can not ping past their routers. What do you think is going on?

[@shafferiyasudheenr5499]

Sir in this network having security services included or not? Suppose having security, what type of security used? Could you Explain sir?

[@Tyler2hunnid]

Hey man, for some reason my interface labels aren't displaying above the cable connections. Do you have any idea how to get those to appear? It would make it a lot easier when trying to interpret the network.

[@RhymeFather]

For anyone wondering. Go into Options > Preferences > Under Interface, make sure "Always show Port Labels in logical workspace" is selected.

[@AGame0320]

@@RhymeFather Thank you

[@JharkhandT20LeagueOfficial]

When i tried entering the router configuration commands it is not allowing me to type anything there? Why?

[@sonushet8364]

7:00 cable?

[@truekxng6497]

why speed up the important part?

[@lonxwolx]

this really helpful, thanks!

[@bitw2325]

wow nice job maaan

[@keithgoh6243]

how to build a network with 5000 hosts and minimum of 10 subnets using class B ipv4 address?

[@oyebolaasa4369]

OK

[@djcurby8182]

why so fast. would be nice to see step by step.

[@rokiakrz3361]

Thank you so much

[@KM-sf6zy]

good explanation! I wish you also make a video in subnetting

[@attrey273]

Why you Fast forward we are learning not watching

[@shivapuri1924]

Is this used for college campus

[@brahtlyrodriguez4875]

Thanks man it was helpful..

[@sayedrafi5072]

Is this star topology

[@Snowpito14]

Hi, did you found out whether or not it is a star topology ?? I cannot found the info

[@mohsinalibhatti7072]

What for 400 users?

[@chlorisR]

អរគុណ💎

[@duuck1337]

Can you give me this project? Please

[@abdulbasitimtiaz]

Not working

[@testWP-testWP-]

Когда индус объяснил тебе лучше твоего учителя.

[@garymontgomery7919]

too fast slow down

[@olliemorland249]

so good mate!

[@anthonygoins2506]

This is not the best video at all. With that said it was of some use

[@userr4693]

Many thanks Qasim, great tutorial, how to contact you pls ?