Build a Hydraulic ram pump from scratch - Dam the river, Assembling the pump and Installation steps

High pressure Non-Electric water pump | Build a Water Pump Without Electricity for Rice Field Irrigation and Drinking Water - River water pump, Hydraulic Ram Pump
A hydraulic ram pump, ram pump, or Pompa hidram is a cyclic water pump powered by hydropower. It takes in water at one "hydraulic head" (pressure) and flow rate, and outputs water at a higher hydraulic head and lower flow rate. The device uses the water hammer effect to develop pressure that allows a portion of the input water that powers the pump to be lifted to a point higher than where the water originally started. The hydraulic ram is sometimes used in remote areas, where there is both a source of low-head hydropower and a need for pumping water to a destination higher in elevation than the source. In this situation, the ram is often useful, since it requires no outside source of power other than the kinetic energy of flowing water
............................
Read more here ⬇️
en.m.wikipedia...
#FreeEnergy #WaterPump #RamPump #Irrigation

[@Ytcrop]

Materials used ⬇️ 1 [ 2 Inch Inlet 2. [ 1½ x 1¼ x 1 Inch Outlet 3. [ 1 PVC Pipe 6 Inch 4. [ 1 PVC Pipe 3 Inch 5. [ 1 Reducing Socket 2 x 3 Inch 6. [ 1 Reducing Socket 3 x 6 Inch 7. [ 1 Tee 3 x 3 Inch 8. [ 1 Large radius elbow 3 Inch 9. [ 1 Flange 3 Inch 10. [ 1 Check Valve 3 Inch 11. [ 1 Tee 3 x 1½ Inch 12. [ 1 Cap 6 Inch 13. [ 1 Blind flange 3 Inch 14. [ 1 Ball Valve 1½ Inch 15. [ 1 Ball Valve 2 Inch 15. [ 1 Union/Watermur 2 Inch 17. [ 1 Long drat 10 mm 18. [ 8 Bolts ⅝ Inch 19. [ 1 Nylon PE (Polyethilene) 20 mm 20. [ 1 Seamless Pipe ID 12 mm 21. [ 1 Gasket Flange 3 Inch 23. [ Lead 3 kg And others

[@mixedtactics]

Awesome bro. Works like a champ.

[@MrAtadin]

Di mekarwangi ieu teh a

[@Farhanyusup-r6y]

Semangat abang khu😊👍

[@rickhanes1033]

ini lokasinya dimana?

[@РжевКартупеля]

Великолепно 🎉

[@ekahadiananugraha4337]

Mantap mang👍 Kinten2 kanggo biaya ngadamel mesin na seep sabaraha? Di abdi parebut cai d sawah nuju halodo, sampe aya Nu nyococokan cai kanggo KA sawah ge

[@Ytcrop]

2-3 jutamah bakal nyampe kang

[@ekahadiananugraha4337]

@@Ytcrop lumayan mang, nuhun info sareng elmu na mang 🙏🙏

[@Ytcrop]

Muhun sami-sami kang

[@ytorganicman]

Tinggi sumber air ke pompanya berapa meter mas?

[@Ytcrop]

Sekitar 2-3 meteran mas

[@ytorganicman]

@@Ytcrop Matur nuwun mas 👍

[@elsukasarypeuntas5163]

Upami pang ngadamelken sapertos ktu kinten sabaraha pangaos na kang

[@sabilillah9113]

Bang kalo dipararel bisa gak , ketinggian sumber 50 cm dinaikkan ke tandon ketinggian 4 meter trus dri tandon kasih pompa lagi untuk dinaikkan lagi 30 an meter , alasanny tidak mau bendung sungai karena kalo hujan banjir besar , tolong jawab bang

[@Ytcrop]

Pake sistem paralel juga bisa mas tapi badan pump harus tetap nyatu biar kerja klepnya barengan, Saran" Kalau ketinggian sumbernya minim pake model linear atau pake yang model klep 45°

[@sabilillah9113]

@@Ytcrop tetap nyatu berati output pump pertama langsung jd input pump 2, tanpa tandon/penggenangan ? Model liner ada contoh video ny gak bang

[@Ytcrop]

Input dan pompanya 2 outputnya 1, Ini video yang model linear yang saya rekomendasikan yang tanpa per kzbin.info/www/bejne/nZ-6k32kbs2gmNE

[@sabilillah9113]

@@Ytcrop owh 2 pompa 2 input , ouput dijadikan satu pas masuk tabung presure ya ??

[@Ytcrop]

@sabilillah9113 ia begitu mas